PIC24FJ128GA202-I/SS - 16-bit 32MHz 128KB Flash MCU | Microchip
部品番号: PIC24FJ128GA202-I/SS ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.18 | $5.18 |
| 10 | $4.62 | $46.20 |
| 100 | $4.07 | $407.00 |
| 500 | $3.55 | $1,775.00 |
| 1,000 | $3.12 | $3,120.00 |
| 3,000 | $2.74 | $8,220.00 |
PIC24FJ128GA202-I/SS 概要
A 16-bit flash microcontroller is a microprocessor that fetches and executes 16-bit-wide instructions from non-volatile Flash memory, providing higher code density and richer peripherals than 8-bit MCUs while remaining easier to program than 32-bit cores. Within the broader semiconductor taxonomy, the PIC24FJ128GA202 sits in the PIC24F XLP subfamily, which extends the PIC microcontroller line -> PIC24F family -> 16-bit MCU -> microcontroller (MCU) -> embedded processing IC -> semiconductor. Its integrated crypto engine with ISO 7816 support makes it especially attractive for contactless smart-card, secure-element, and authentication endpoints that previously required a companion secure IC.
Key features include 128 KB self-programmable Flash with ECC, 8 KB SRAM, hardware AES/SHA/DES/Triple-DES/RSA/ECC acceleration (Microchip proprietary crypto library), four 16-bit timers, two UART/I2C/SPI modules, a 10/12-bit ADC with up to 16 channels, five 16-bit PWM/CCP/SCCP channels, a Real-Time Clock and Calendar (RTCC) with calendar mode, and an integrated 32 kHz low-power oscillator. The XLP nanoWatt technology delivers standby currents below 20 nA (typical) in deep-sleep modes, while the 32 MHz internal oscillator eliminates an external crystal in cost-sensitive designs.
Typical applications include secure contactless payment terminals, IoT sensor nodes with TLS acceleration, smart energy meters with cryptographic signing, battery-powered medical wearables, and ISO 7816 smart-card interface boards. In each case the part combines the right mix of secure-element hardware and eXtreme Low Power run/sleep modes to extend battery life while offloading cryptographic primitives from the main CPU.
When designing with this part, plan for a decoupling network of 100 nF + 4.7 uF ceramic caps on VDD/AVDD with traces kept short to the SSOP body. Use the 32 kHz SOSC crystal only if RTCC calendar drift below ±5 ppm is required; otherwise the internal LPRC oscillator is sufficient for low-power timekeeping.
ドロップイン代替品: PIC24FJ128GA202-I/SS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ128GA202-I/SS （同一形状・フットプリント） — 相違点: Package, Program Memory (Flash), ADC, Operating Temperature, MSL Level.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24FJ128GA202-E/SS
✅ ドロップイン✓ 在庫あり
$2.6 / 個
データシートを見る →PIC24FJ128GA202T-I/SS
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24FJ128GA202-I/SS 最大定格＆電気的特性
| Product Series | PIC24F XLP Family |
| Core Architecture | PIC24F 16-bit RISC |
| Maximum Clock Speed | 32 MHz (16 MIPS at 3.3 V) |
| Program Memory (Flash) | 128 KB (43K x 24 words) |
| Data RAM | 8 KB |
| Data EEPROM | Not present |
| Operating Voltage Range | 2.0 V to 3.6 V |
| パッケージ | 28-SSOP (5.30 mm body) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40 °C to +85 °C (Industrial) |
| I/O Pins | 21 |
| ADC | 10-bit, up to 9 channels |
| Crypto Engine | AES, DES/3DES, SHA-1/256, RSA, ECC, MD5 |
| Communication Interfaces | 2x UART/I2C/SPI |
| Timers | 5x 16-bit (Timer1-Timer5) |
| PWM Channels | 5x 16-bit Output Compare |
| RTCC | Yes, with calendar mode |
| Internal Oscillator | 31 kHz LPRC + 8 MHz / 32 MHz FRC with PLL |
| Standby Current | 20 nA typical (Sleep + RTCC) |
| RoHS ステータス | Compliant |
| MSLレベル | 1 (unlimited floor life at <30 °C / 85 % RH) |
PIC24FJ128GA202-I/SS ピン構成
| ピン 1 | RA0 — PORTA bit 0 (analog AN0, reference VREF+) |
| ピン 2 | RA1 — PORTA bit 1 (analog AN1) |
| ピン 3 | RA2 — PORTA bit 2 (analog AN2) |
| ピン 4 | RA3 — PORTA bit 3 (analog AN3) |
| ピン 5 | RA4 — PORTA bit 4 (analog AN4) |
| ピン 6 | RA5 — PORTA bit 5 (analog AN5) |
| ピン 7 | RA6 — PORTA bit 6 (OSC2 / CLKO) |
| ピン 8 | RA7 — PORTA bit 7 (OSC1 / CLKI) |
| ピン 9 | VSS — Ground reference |
| ピン 10 | RB0 — PORTB bit 0 (PGED1/AN8) |
| ピン 11 | RB1 — PORTB bit 1 (PGEC1/AN9) |
| ピン 12 | RB2 — PORTB bit 2 (analog AN10, SDA2) |
| ピン 13 | RB3 — PORTB bit 3 (analog AN11, SCL2) |
| ピン 14 | RB4 — PORTB bit 4 (SDA1) |
| ピン 15 | RB5 — PORTB bit 5 (SCL1) |
| ピン 16 | RB6 — PORTB bit 6 (PGC2/EMUC2) |
| ピン 17 | RB7 — PORTB bit 7 (PGD2/EMUD2) |
| ピン 18 | RC0 — PORTC bit 0 |
| ピン 19 | RC1 — PORTC bit 1 |
| ピン 20 | RC2 — PORTC bit 2 |
| ピン 21 | VDD — Positive supply (2.0 V to 3.6 V) |
| ピン 22 | VSS — Ground reference |
| ピン 23 | RC3 — PORTC bit 3 |
| ピン 24 | RC4 — PORTC bit 4 |
| ピン 25 | RC5 — PORTC bit 5 |
| ピン 26 | RC6 — PORTC bit 6 (TX1) |
| ピン 27 | RC7 — PORTC bit 7 (RX1) |
| ピン 28 | RB8 — PORTB bit 8 (SCL3) |
主な用途
PIC24FJ128GA202-I/SS の用途: 7 件s: Secure Contactless Payment Terminal, Battery-Powered IoT Sensor Node, Smart Energy Meter with Cryptographic Signing, ISO 7816 Smart-Card Interface Board, Wearable Medical Health Monitor, Industrial Sensor Hub with Secure Boot, Home Automation Security Panel.
Secure Contactless Payment Terminal
The PIC24FJ128GA202-I/SS is well-suited to secure contactless payment terminals because its hardware crypto engine accelerates AES-128 and RSA-2048 handshakes directly, offloading TLS from the application CPU and shrinking transaction latency. With 128 KB Flash it fits a full EMVCo-like state machine plus key-storage routines, and the 21 GPIO can drive a secure element, NFC front-end and segmented LCD. XLP nanoWatt Sleep at 20 nA typical lets a coin-cell backup maintain time and tamper detection for years without recharging. The integrated ISO 7816 controller handles T=0/T=1 smart-card protocols, so designers can replace an external secure-element companion IC.
おすすめ
Battery-Powered IoT Sensor Node
The PIC24FJ128GA202-I/SS fits battery-powered IoT sensor nodes that need secure MQTT/TLS at multi-year battery life. Its 16 MIPS core wakes quickly from sleep, runs AES-CCM authentication, then returns to deep-sleep at <20 nA with RTCC ticking. The 10-bit ADC with 9 channels handles thermistor, battery-voltage and PIR sensor inputs directly, while the two UART/I2C/SPI peripherals connect radios (LoRa, BLE, sub-GHz) without extra logic. Internal 32 MHz FRC with PLL eliminates external crystals, and the 2.0-3.6 V supply range is compatible with single-cell Li-FeS2 and 2xAA chemistries.
おすすめ
Smart Energy Meter with Cryptographic Signing
In smart energy meters the PIC24FJ128GA202-I/SS provides the secure metering controller role: SHA-256 hardware acceleration signs consumption records, and the 128 KB Flash stores signed firmware for OTA updates. Its 10-bit ADC with 9 channels digitizes current-transformer and voltage-divider signals, while RTCC timestamps every sample for billing accuracy. The industrial -40 to +85 °C rating tolerates outdoor cabinet conditions, and XLP Sleep at 20 nA keeps backup battery draw negligible during power outages. Hardware crypto offload means the metering task can run in real time without missing pulse edges.
おすすめ
ISO 7816 Smart-Card Interface Board
The PIC24FJ128GA202-I/SS targets ISO 7816 smart-card interface boards because its on-chip hardware crypto engine supports T=0 and T=1 protocols natively, while AES/DES/3DES/RSA/ECC accelerators handle card-side authentication. The 21 GPIO expose I/O lines for card presence, VCC, RST and CLK signals through simple level shifters, and the UART/I2C host-side interface links to a PC terminal or embedded host. The 28-SSOP footprint allows the entire reader to fit behind a SIM socket, and 20 nA Sleep current preserves battery on portable readers between transactions.
おすすめ
Wearable Medical Health Monitor
Wearable medical monitors benefit from the PIC24FJ128GA202-I/SS because of its XLP Sleep at 20 nA typical, which lets continuous heart-rate or SpO2 monitoring run for weeks on a coin cell. Its 10-bit ADC captures photodiode or bio-impedance signals, while AES hardware acceleration protects patient data over BLE links. The 28-SSOP package weighs under 1 g and occupies less than 30 mm² of board area, ideal for compact wearables. Hardware SHA-256 lets the device sign health events before transmission, supporting HIPAA-style data-integrity requirements without external crypto ICs.
おすすめ
Industrial Sensor Hub with Secure Boot
Industrial sensor hubs leverage the PIC24FJ128GA202-I/SS for secure-boot and signed firmware updates in IIoT edge nodes. Its ECC and SHA-256 accelerators verify boot images in milliseconds, and the 128 KB Flash stores encrypted firmware blobs plus runtime keys. The 5x 16-bit timers drive PWM outputs for valve/actuator control, while the UART/I2C/SPI pair connects RS-485 transceivers and digital sensors. The industrial -40 to +85 °C rating tolerates factory-floor temperatures, and 20 nA Sleep current keeps battery-backed hubs online during plant power events.
おすすめ
Home Automation Security Panel
Home-automation security panels built around the PIC24FJ128GA202-I/SS get hardware-accelerated AES encryption for wireless sensor pairs (door/window, PIR, glass-break) without taxing the main processor. The 21 GPIO connect directly to keypads, sirens, status LEDs and a backup-battery monitor, while the RTCC timestamps every alarm event for forensic logs. The 10-bit ADC monitors backup-battery voltage, and the 20 nA Sleep current keeps the panel alive for months on battery during AC outages. Two UART/I2C/SPI modules interface to Wi-Fi/BLE modules for cloud reporting.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ128GA202-I/SS — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ128GA202-E/SS | PIC24FJ128GA202T-I/SS |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP (same) | 28-SSOP (same) |
| Program Memory (Flash) | 128 KB | 128 KB | 128 KB |
| Data RAM | 8 KB | 8 KB | 8 KB |
| Maximum Clock Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Voltage Range | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 °C to +85 °C (Industrial) | -40 °C to +125 °C (Extended) | -40 °C to +85 °C (Industrial) |
| Hardware Crypto Engine | AES / DES / SHA / RSA / ECC | AES / DES / SHA / RSA / ECC | AES / DES / SHA / RSA / ECC |
| Standby Current (Sleep + RTCC) | 20 nA typical | 20 nA typical | 20 nA typical |
| Shipping Medium | Tube | Tube | Tape & Reel |
主な差別化要因
- Integrated hardware crypto engine in 28-SSOP （vs PIC24EP256MC202-H/SS)
- eXtreme Low Power Sleep at 20 nA typical （vs PIC24FJ128GA202-E/SS)
- 28-SSOP package with 21 GPIO （vs PIC24FJ128GA202-I/SP)
- Tube shipping medium lowers prototype cost （vs PIC24FJ128GA202T-I/SS)
設計ノート
Per Microchip datasheet DS39747A, place a 100 nF ceramic decoupling capacitor on every VDD pin within 5 mm of the package body, plus a single 4.7 uF bulk capacitor on the main VDD rail. Use a ferrite bead or pi-filter on AVDD if ADC measurements are noisy. The XLP Sleep+RTCC current is specified at 20 nA typical only when all GPIO are configured as outputs driving defined levels, so set unused pins to output-low rather than floating input to minimize phantom current draws.
The 28-SSOP package has a junction-to-ambient thermal resistance (theta_JA) of approximately 78 °C/W in still air. At maximum active current (around 12 mA at 32 MHz, 3.3 V) dissipation is approximately 40 mW, yielding a junction rise of just 3 °C - well within the 85 °C industrial limit. For Extended -E variants at +125 °C ambient, no heatsink is required because the SSOP is rated to that maximum junction temperature.
Keep the 28-SSOP trace lengths under 25 mm to minimize EMI and ADC sampling error. Per Microchip datasheet DS39747A, use a continuous ground plane under the SSOP body and route analog traces (AN0-AN9, VREF+, VREF-) away from digital switching lines like PWM outputs. If using the external 32.768 kHz SOSC crystal for RTCC, place the crystal within 5 mm of SOSCI/SOSCO and guard the traces with ground pour to keep RTC drift below ±20 ppm.
Do not exceed 3.6 V on VDD - the PIC24FJ128GA202-I/SS is NOT 5 V tolerant on any pin. Per datasheet DS39747A, the brown-out reset is factory-trimmed; do not bypass the BOR fuse or the part may corrupt Flash during power-down. When programming with ICSP, ensure PGECx/PGEDx lines are not assigned to peripherals in user firmware or debug access will fail. Do not rely on the internal 8 MHz FRC accuracy above ±2 % over temperature; use the PLL-locked 32 MHz only for protocols tolerant of this drift, otherwise fit an external crystal.
Per Microchip datasheet DS39747A, the 10-bit ADC achieves 10 ENOB only with an input bandwidth below 500 Hz and an external 4.7 uF + 100 nF capacitor network on VREF+ when used. The crypto engine produces brief current spikes during AES/DES/RSA operations; isolate AVDD with a ferrite bead from VDD if ADC sampling coincides with crypto tasks. Use hardware CRC and DMA for ADC double-buffering at full 200 ksps throughput.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. Industrial -I grade only; -E variant required for +125 °C. Not AEC-Q100 qualified - automotive designs should select PIC24FJ128GA202T-I/SS in automotive-qualified supply.
