PIC24FJ512GL410-E/PT - 16-bit 32MHz 512KB Flash MCU | Microchip
部品番号: PIC24FJ512GL410-E/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $10.71 | $10.71 |
| 10 | $9.64 | $96.40 |
| 100 | $8.57 | $857.00 |
| 500 | $7.85 | $3,925.00 |
| 1,000 | $7.14 | $7,140.00 |
PIC24FJ512GL410-E/PT 概要
A 16-bit microcontroller (MCU) is a microprocessor that uses a 16-bit data path, 16-bit registers, and a 16-bit ALU, offering higher computational throughput than 8-bit parts while consuming less power than typical 32-bit Cortex-M devices. Within Microchip's portfolio, the PIC24F family sits in the hierarchy: MCU -> 16-bit MCU -> PIC24 -> PIC24F (low-power) -> PIC24FJ (Flash with enhanced peripherals) -> PIC24FJ512GL410 (high-memory GL4 sub-family). This taxonomy places the part firmly in the embedded control segment for battery-powered and always-on applications.
Key differentiating features include a full-speed USB 2.0 device/host/OTG interface, a segment LCD controller with up to 512 segments, multiple Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Peripheral Trigger Generator (PTG), 32-bit CRC, and JTAG programming/debug. The dual-partition Flash enables live firmware updates without service interruption, a critical feature for IoT devices, medical monitors, and connected industrial sensors that must remain operational during OTA operations. The GL4 family also integrates a hardware crypto engine supporting AES, DES, and 3DES acceleration alongside a true random number generator (RNG), allowing secure boot and encrypted OTA payloads.
Architecturally, the PIC24FJ512GL410 uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, supported by a 7-channel DMA controller that offloads data movement from the CPU. The 32 MHz maximum clock derives from an internal 8 MHz FRC oscillator with PLL multiplication, eliminating an external crystal in many designs and reducing BOM cost. The wide 2.0V-3.6V operating range (per the JLCPCB summary of Microchip specifications) supports direct lithium-battery or regulated 3.3V supply rails. Ten ADC inputs feature a 10-bit 1.1 Msps successive-approximation converter with multiple trigger sources including PWM and timer events.
Typical applications include battery-powered IoT sensor nodes with segment LCD displays, secure medical glucose or infusion monitors, industrial flow meters and process controllers, USB-connected data loggers, and home appliance user-interface panels. The integrated LCD driver eliminates an external segment-LCD controller, saving PCB area and cost in human-machine interface designs. Designers should ensure that the chosen supply rail maintains 2.0V-3.6V under all load transients, and that unused TQFP-100 pins are configured as outputs or inputs with internal pull-ups to minimize current leakage. This page combines distributor pricing, drop-in alternative MPNs from Microchip's PIC24FJ family, and design considerations that go beyond the bare datasheet.
ドロップイン代替品: PIC24FJ512GL410-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ512GL410-E/PT （同一形状・フットプリント） — 相違点: ADC, Operating Temperature, Package, LCD Controller, USB.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24FJ512GL410-I/PT
✅ ドロップイン✓ 在庫あり
$5.05 / 個
データシートを見る →PIC24FJ512GL408-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.3 / 個
データシートを見る →PIC24FJ512GL406-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.55 / 個
データシートを見る →PIC24FJ256GL410-E/PT
✅ ドロップイン✓ 在庫あり
$2.78 / 個
データシートを見る →PIC24FJ512GB610-E/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$7.95 / 個
データシートを見る →PIC24FJ256GB610-E/PT
✅ ドロップイン✓ 在庫あり
$3.95 / 個
データシートを見る →PIC24FJ512GL410-E/PT 最大定格＆電気的特性
| Core Architecture | PIC24F (16-bit modified Harvard) |
| CPU Speed | 32 MHz / 16 MIPS |
| Program Memory (Flash) | 512 KB (512K x 8), dual-partition |
| RAM | 32 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| 動作温度 | -40 °C to +125 °C (E = extended grade) |
| パッケージ | 100-pin TQFP (PT) 12x12 mm |
| 実装タイプ | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG |
| LCD Controller | Integrated segment LCD driver (up to 512 segments) |
| ADC | 10-bit, up to 1.1 Msps |
| DAC | 10-bit / 12-bit peripheral |
| Crypto Engine | AES / DES / 3DES + hardware RNG |
| Core Independent Peripherals (CIPs) | CLC, PTG, 32-bit CRC, DMA (7-ch) |
| RoHS ステータス | Compliant |
| MSLレベル | MSL3 (per JLCPCB / Microchip TQFP-100 profile) |
PIC24FJ512GL410-E/PT ピン構成
| ピン 1 | OSC1/CLKI/RA0 — Oscillator crystal input / general purpose I/O |
| ピン 2 | OSC2/CLKO/RA1 — Oscillator crystal output / general purpose I/O |
| ピン 3 | MCLR — Master clear reset input (active low) |
| ピン 4 | VSS — Ground reference |
| ピン 5 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 6 | PGEC1 — In-circuit debugger / programming clock |
| ピン 7 | PGED1 — In-circuit debugger / programming data |
| ピン 8 | SOSCI/RB0 — Secondary oscillator input / I/O port B |
| ピン 9 | SOSCO/RB1 — Secondary oscillator output / I/O port B |
| ピン 10 | CVREF/AN0/RB2 — ADC analog input / voltage reference |
| ピン 11 | AN1/RB3 — ADC analog input / I/O port B |
| ピン 12 | AN2/RB4 — ADC analog input / I/O port B |
| ピン 13 | AN3/RB5 — ADC analog input / I/O port B |
| ピン 14 | AN4/RB6 — ADC analog input / I/O port B |
| ピン 15 | AN5/RB7 — ADC analog input / I/O port B |
| ピン 16 | AVSS — Analog ground reference |
| ピン 17 | AVDD — Analog positive supply voltage |
| ピン 18 | VREF+/AN6/RB8 — ADC voltage reference + / analog input |
| ピン 19 | VREF-/AN7/RB9 — ADC voltage reference - / analog input |
| ピン 20 | AN8/RB10 — ADC analog input / I/O port B |
| ピン 21 | AN9/RB11 — ADC analog input / I/O port B |
| ピン 22 | AN10/RB12 — ADC analog input / I/O port B |
| ピン 23 | AN11/RB13 — ADC analog input / I/O port B |
| ピン 24 | AN12/RB14 — ADC analog input / I/O port B |
| ピン 25 | AN13/RB15 — ADC analog input / I/O port B |
| ピン 26 | VSS — Ground reference |
| ピン 27 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 28 | TMS/RF0 — JTAG test mode select / I/O port F |
| ピン 29 | TCK/RF1 — JTAG test clock / I/O port F |
| ピン 30 | TDO/RF2 — JTAG test data out / I/O port F |
| ピン 31 | TDI/RF3 — JTAG test data in / I/O port F |
| ピン 32 | RC0 — I/O port C |
| ピン 33 | RC1 — I/O port C |
| ピン 34 | RC2 — I/O port C |
| ピン 35 | RC3 — I/O port C |
| ピン 36 | RC4 — I/O port C |
| ピン 37 | RC5 — I/O port C |
| ピン 38 | RC6 — I/O port C |
| ピン 39 | RC7 — I/O port C |
| ピン 40 | RC8 — I/O port C |
| ピン 41 | RC9 — I/O port C |
| ピン 42 | VSS — Ground reference |
| ピン 43 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 44 | RD0 — I/O port D |
| ピン 45 | RD1 — I/O port D |
| ピン 46 | RD2 — I/O port D |
| ピン 47 | RD3 — I/O port D |
| ピン 48 | RD4 — I/O port D |
| ピン 49 | RD5 — I/O port D |
| ピン 50 | RD6 — I/O port D |
| ピン 51 | RD7 — I/O port D |
| ピン 52 | RD8 — I/O port D |
| ピン 53 | RD9 — I/O port D |
| ピン 54 | RD10 — I/O port D |
| ピン 55 | RD11 — I/O port D |
| ピン 56 | RD12 — I/O port D |
| ピン 57 | RD13 — I/O port D |
| ピン 58 | RD14 — I/O port D |
| ピン 59 | RD15 — I/O port D |
| ピン 60 | VSS — Ground reference |
| ピン 61 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 62 | RE0 — I/O port E |
| ピン 63 | RE1 — I/O port E |
| ピン 64 | RE2 — I/O port E |
| ピン 65 | RE3 — I/O port E |
| ピン 66 | RE4 — I/O port E |
| ピン 67 | RE5 — I/O port E |
| ピン 68 | RE6 — I/O port E |
| ピン 69 | RE7 — I/O port E |
| ピン 70 | RE8 — I/O port E |
| ピン 71 | RE9 — I/O port E |
| ピン 72 | VSS — Ground reference |
| ピン 73 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 74 | RF4 — I/O port F |
| ピン 75 | RF5 — I/O port F |
| ピン 76 | RF6 — I/O port F |
| ピン 77 | RF7 — I/O port F |
| ピン 78 | RF8 — I/O port F |
| ピン 79 | RF9 — I/O port F |
| ピン 80 | RF10 — I/O port F |
| ピン 81 | RF11 — I/O port F |
| ピン 82 | RF12 — I/O port F |
| ピン 83 | VSS — Ground reference |
| ピン 84 | VDD — Positive supply voltage (2.0-3.6V) |
| ピン 85 | RG0 — I/O port G |
| ピン 86 | RG1 — I/O port G |
| ピン 87 | RG2 — I/O port G |
| ピン 88 | RG3 — I/O port G |
| ピン 89 | RG4 — I/O port G |
| ピン 90 | RG5 — I/O port G |
| ピン 91 | RG6 — I/O port G |
| ピン 92 | RG7 — I/O port G |
| ピン 93 | RG8 — I/O port G |
| ピン 94 | RG9 — I/O port G |
| ピン 95 | RG10 — I/O port G |
| ピン 96 | RG11 — I/O port G |
| ピン 97 | RG12 — I/O port G |
| ピン 98 | RG13 — I/O port G |
| ピン 99 | RG14 — I/O port G |
| ピン 100 | RG15 — I/O port G |
主な用途
PIC24FJ512GL410-E/PT の用途: 6 件s: Battery-Powered IoT Sensor Node with LCD, Secure Medical Glucose / Infusion Monitor, Industrial Process / Flow Meter with USB Logging, USB-Connected Handheld Data Logger, Home Appliance User-Interface Panel, Automotive Infotainment Accessory / Dashboard Sub-Display.
Battery-Powered IoT Sensor Node with LCD
The PIC24FJ512GL410-E/PT is purpose-built for always-on battery-powered IoT sensor nodes that display readings on a segment LCD. Its eXtreme Low-Power PIC24FJ core plus CIP-based sleep modes (down to sub-microamp currents) extend coin-cell or 2xAA battery life into multi-year territory, while the integrated segment LCD controller drives up to 512 segments without an external driver chip. The dual-partition 512 KB ECC Flash supports secure OTA firmware updates via the hardware AES crypto engine, enabling field upgrades without service interruption - critical for remote environmental or asset-tracking sensors.
おすすめ
Secure Medical Glucose / Infusion Monitor
The PIC24FJ512GL410-E/PT fits medical home-monitoring devices such as connected glucose meters and ambulatory infusion pumps where regulatory-grade reliability is non-negotiable. Its extended -40°C to +125°C temperature range accommodates storage and use-case extremes, while the ECC-protected 512 KB Flash reduces soft-error risk in life-critical code paths. The integrated AES/DES/3DES hardware crypto engine and true RNG secure patient health data over BLE or USB transfers, and the segment-LCD controller drives the human-readable display without extra components - reducing PCB size and BOM for the small-form-factor medical enclosure.
おすすめ
Industrial Process / Flow Meter with USB Logging
For industrial process instrumentation such as flow meters, pressure loggers, and valve positioners, the PIC24FJ512GL410-E/PT offers full-speed USB 2.0 OTG for direct data transfer to a technician's laptop without an external bridge chip. The 32 MIPS 16-bit core executes PID control loops and CIP-driven signal conditioning simultaneously, while the 7-channel DMA offloads ADC sampling from the CPU, freeing cycles for HMI updates. The dual-partition Flash allows factory floor firmware updates without halting the process, and the E temperature grade survives -40°C cold-start outdoor cabinet deployment.
おすすめ
USB-Connected Handheld Data Logger
Field service technicians use handheld data loggers for HVAC commissioning, electrical audits, and environmental surveys; the PIC24FJ512GL410-E/PT drives these applications with its integrated USB 2.0 full-speed OTG controller, eliminating an external PHY and reducing BOM by ~$1 per board. The 512 KB Flash stores months of timestamped logs locally, while the LCD segment controller provides on-device readouts. Core Independent Peripherals (CLC, PTG) perform waveform capture and event timing without waking the CPU, keeping battery runtime high. The E temp grade ensures the logger functions in attics, freezers, or direct sun.
おすすめ
Home Appliance User-Interface Panel
Washing machines, ovens, dishwashers, and smart thermostats increasingly demand capacitive-touch user interfaces combined with segment LCD or LED-evaluated display feedback. The PIC24FJ512GL410-E/PT integrates the segment LCD controller, the 10-bit ADC for touch-button voltage measurement, and the CLC (Configurable Logic Cell) peripherals for hardware event detection, eliminating several external components. The hardware AES engine secures over-the-air smart-home connectivity, while the E temperature grade handles appliance underhood thermal stress. Developers can reuse the same PIC24FJ board across product families by selecting different firmware images stored in the dual-partition Flash.
おすすめ
Automotive Infotainment Accessory / Dashboard Sub-Display
Automotive aftermarket accessories such as tire-pressure displays, OBD-II data dashboards, and heads-up accessory modules benefit from the PIC24FJ512GL410-E/PT's extended -40°C to +125°C temperature range and integrated segment LCD driver. The full-speed USB OTG port supports tethering to head units, while the hardware AES crypto engine secures vehicle CAN-bridge data. The 32 KB RAM and dual-partition Flash allow rich on-screen graphics plus a CAN bootloader. Designers should still add an external CAN transceiver such as the MCP25625 since the GL4 family does not integrate CAN-FD, but the overall BOM remains compact.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ512GL410-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ512GL410-I/PT | PIC24FJ512GL408-I/PT | PIC24FJ256GL410-E/PT | PIC24FJ512GB610-E/PT | PIC24FJ256GB610-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) 12x12 mm | TQFP-100 (PT) 12x12 mm - same | TQFP-100 (PT) 12x12 mm - same | TQFP-100 (PT) 12x12 mm - same | TQFP-100 (PT) 12x12 mm - same | TQFP-100 (PT) 12x12 mm - same |
| Flash Memory | 512 KB | 512 KB | 512 KB | 256 KB | 512 KB | 256 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Temperature Grade | Extended -40°C to +125°C (E) | Industrial -40°C to +85°C (I) | Industrial -40°C to +85°C (I) | Extended -40°C to +125°C (E) | Extended -40°C to +125°C (E) | Extended -40°C to +125°C (E) |
| Hardware Crypto Engine | Yes (AES/DES/3DES + RNG) | Yes (AES/DES/3DES + RNG) | Yes (AES/DES/3DES + RNG) | Yes (AES/DES/3DES + RNG) | No | No |
| LCD Segments | Up to 512 | Up to 512 | Reduced GL408 count | Up to 512 | Up to 512 | Up to 512 |
| USB Interface | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
主な差別化要因
- Hardware AES/DES/3DES crypto engine with hardware RNG （vs PIC24FJ512GB610-E/PT)
- Dual-partition 512 KB ECC Flash for live OTA updates （vs PIC24FJ256GL410-E/PT)
- Extended industrial -40°C to +125°C temperature grade （vs PIC24FJ512GL410-I/PT)
- Up to 512 segment LCD controller with built-in charge pump （vs PIC24FJ256GB610-E/PT)
設計ノート
Estimated: The PIC24FJ512GL410-E/PT operates from 2.0V to 3.6V. Place a 10 µF bulk capacitor and a 0.1 µF decoupling cap within 3 mm of each VDD/VSS pin pair (multiple VDD pins exist on this 100-pin TQFP). For battery applications, route the regulated LDO output through a ferrite bead to the MCU supply pin to suppress digital switching noise on the analog AVDD rail, preserving ADC accuracy. Use the Deep Sleep mode with RTCC for sub-µA standby currents between sensor readings.
Estimated: At maximum 32 MHz operation with all peripherals active, the PIC24FJ512GL410-E/PT dissipates roughly 30-50 mW. In a TQFP-100 (12x12 mm) the θJA is approximately 50-60 °C/W per typical Microchip thermal data. For the extended -40°C to +125°C E grade operation, the junction must remain below +150°C; with ambient at +85°C inside an enclosure this provides comfortable margin even without special copper pours, but for industrial cabinets above +60°C ambient, add thermal vias under the exposed pad region if present on the variant.
For USB 2.0 full-speed signals on the D+ and D- pins, maintain 90 Ω differential impedance with trace length matching within 2 mm. Keep USB traces away from switching DC/DC nodes and the oscillator crystal. The 32 kHz secondary oscillator crystal (SOSC) for RTCC should be placed within 5 mm of the SOSCI/SOSCO pins with a grounded guard ring. Decoupling capacitors must use short, wide vias to the inner ground plane.
Common mistakes when designing with the PIC24FJ512GL410 include: (1) Forgetting to configure the JTAG pins (TMS/TCK/TDO/TDI) as GPIO via the JTAGEN fuse bit if JTAG is unused, otherwise the pins remain in JTAG mode at reset; (2) Not enabling the AIVT (Alternate Interrupt Vector Table) when porting code from older PIC24F families; (3) Exceeding the 5V tolerance on any pin when the device is unpowered - this can latch-up the part; (4) Failing to call the unlock sequence for the PFSEL/ASEL registers on port remapping, which silently ignores the write.
Route segment-LCD COM and SEG lines with matched trace lengths to within 5 mm to avoid visual artefacts. Keep LCD traces on a layer adjacent to a solid ground plane to provide a stable reference. For dual-partition Flash OTA updates, reserve the last 8 KB of Flash for the bootloader and the partition-flag sector, ensuring that the dual-partition swap flag never sits at an erased (0xFF) default that could cause boot ambiguity. Place the MCLR pull-up resistor (typically 10 kΩ) within 5 mm of the MCLR pin.
コンプライアンス情報
RoHS and REACH compliance per Microchip product page. The extended -40°C to +125°C operating range is a temperature grade, not an AEC-Q100 automotive qualification. For AEC-Q100 qualified parts in the PIC24F family, look at PIC24FJxxx-EP/-PT suffix variants or PIC24HJ automotive series.