PIC24FJ64GA202-I/SP - 16-bit 32MHz MCU | Microchip Technology
部品番号: PIC24FJ64GA202-I/SP ✓ 生産中PIC24FJ64GA202-I/SP 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The PIC24F family belongs to the broader embedded-control hierarchy of 16-bit RISC microcontrollers. The XLP, or eXtreme Low Power, architecture emphasizes reduced active and sleep-mode energy use, making this family suitable for battery-powered instruments, portable medical equipment, industrial controls, and connected sensing nodes.
The PIC24FJ64GA202-I/SP combines 64 KB of Flash with 8 KB of RAM and an integrated crypto module. The cryptographic hardware supports applications that need protected data handling, key storage, secure communications, and random-number generation without relying entirely on software-based cryptographic routines. Its 16-bit architecture and 32 MHz maximum operating frequency provide a practical balance of processing capability, memory efficiency, and low system complexity.
The GA2 family provides advanced peripherals for embedded control systems. Depending on the specific device configuration, these peripherals can support timers, communication interfaces, analog-to-digital conversion, and general-purpose I/O. The 28-pin SPDIP package provides through-hole mechanical support and is useful for prototypes, educational designs, industrial controllers, and applications where a socket or through-hole assembly is preferred over a fine-pitch surface-mount package.
Typical uses include portable security and authentication equipment, low-power sensor nodes, medical monitoring devices, industrial control modules, and embedded access-control products. The integrated crypto engine is particularly useful where device identity, stored keys, and encrypted transactions must be protected while the system remains power constrained. The 32 MHz core and 64 KB Flash also allow local control logic and application firmware to reside in one device.
For PCB design, confirm the exact pin assignment and exposed power requirements against the manufacturer datasheet before routing signals. Use the required decoupling, programming interface, oscillator arrangement, and reset circuitry specified by Microchip. When programming or debugging, verify that the programmer supports the PIC24FJ64GA202 device family and the selected package variant.
This page combines manufacturer specifications, package details, sourcing information, verified drop-in alternatives, and practical design guidance for engineers evaluating the PIC24FJ64GA202-I/SP for low-power embedded systems.
ドロップイン代替品: PIC24FJ64GA202-I/SP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ64GA202-I/SP (同一形状・フットプリント) — 相違点: Package, Mounting Type, Operating Voltage, ADC, Program Memory (Flash).
PIC24FJ64GA202-E/SP
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PIC24FJ64GA002-I/SP
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24FJ64GA202-I/SP 最大定格&電気的特性
| Product Type | 16-bit flash microcontroller |
| Architecture | PIC24F RISC |
| Maximum Operating Frequency | 32 MHz |
| Flash Memory | 64 KB |
| RAM | 8 KB |
| Operating Voltage | 2.5 V to 3.3 V |
| パッケージ | 28-pin SPDIP |
| 実装タイプ | Through-hole |
| Integrated Crypto Module | Yes |
| Crypto Features | Key storage and random number generator |
| Low Power Technology | XLP eXtreme Low Power |
| 動作温度 | -40 °C to +85 °C |
| ADC Resolution | 10-bit and 12-bit |
| Programming | Flash programming |
PIC24FJ64GA202-I/SP 28-pin spdip ピン配置ガイド
PIC24FJ64GA202-I/SP (28-pin spdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC24FJ64GA202-I/SP.
詳細は データシート をご参照ください。
主な用途
PIC24FJ64GA202-I/SP の用途: 6 件s: Portable Authentication Terminals, Battery-Powered Sensor Nodes, Portable Medical Monitoring, Industrial Control Modules, Secure Access-Control Products, Programmable Instrumentation.
Portable Authentication Terminals
PIC24FJ64GA202-I/SP fits portable authentication and access-control terminals because its integrated crypto module supports key storage and random-number generation close to the application firmware. The 32 MHz 16-bit core can coordinate user input, display updates, logging, and communications, while 64 KB Flash and 8 KB RAM provide local code and working space. Its 28-pin SPDIP package simplifies through-hole prototypes and serviceable industrial assemblies, although a surface-mount option is preferable for compact production units.
おすすめ
Battery-Powered Sensor Nodes
PIC24FJ64GA202-I/SP is appropriate for battery-powered sensing equipment where a 32 MHz control core must coexist with low-power operation. The XLP architecture targets reduced energy consumption during idle periods, and the microcontroller can coordinate timers, analog measurement functions, communications, and application-specific control. With 64 KB Flash, it can hold calibration logic and protocol handling locally, while the through-hole package is especially convenient for early prototypes and ruggedized assemblies with available board space.
おすすめ
Portable Medical Monitoring
PIC24FJ64GA202-I/SP can serve as the control MCU in portable medical monitoring equipment where low power, local processing, and protected data are important. Its 16-bit architecture and 32 MHz operating frequency support signal conditioning, measurement sequencing, user-interface management, and event logging. The integrated crypto module can help protect device data and authentication information, while the 28-pin SPDIP package allows straightforward through-hole construction during prototype and validation stages.
おすすめ
Industrial Control Modules
PIC24FJ64GA202-I/SP is useful in industrial control modules that combine local logic, communications, and protected configuration data. The 32 MHz core provides useful timing headroom for control loops and protocol handling, and the 64 KB Flash can hold application code, while 8 KB RAM supports buffering and state management. The 28-pin SPDIP package is practical for modules that prioritize rugged assembly and easy inspection rather than minimum PCB area.
おすすめ
Secure Access-Control Products
PIC24FJ64GA202-I/SP fits access-control readers and credential-handling products that need cryptographic support without a separate security IC. Its integrated crypto module, key storage, and random-number generator can support device identity and protected transactions, while the 16-bit core handles keypad or reader input, relay or lock control, status reporting, and communications. The SPDIP package makes the part attractive for prototypes and serviceable through-hole controller boards.
おすすめ
Programmable Instrumentation
PIC24FJ64GA202-I/SP can be used in programmable instrumentation that needs local control, measurement functions, and flexible firmware. Its 32 MHz 16-bit core is suitable for coordinating acquisition timing, control sequences, communications, and front-panel behavior, while 64 KB Flash supports structured firmware and 8 KB RAM supports temporary data handling. The through-hole package simplifies instrument prototyping, education platforms, and low-volume industrial products where socketed or through-hole servicing is valuable.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ64GA202-I/SP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ64GA202-E/SP | PIC24FJ64GA002-I/SP |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Product Type | 16-bit flash microcontroller | 16-bit flash microcontroller | 16-bit flash microcontroller |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB |
| Temperature Grade | Industrial grade, -40 °C to +85 °C | Extended temperature grade | Industrial grade |
| Low-Power Technology | XLP eXtreme Low Power | XLP eXtreme Low Power | Low-power PIC24F architecture |
主な差別化要因
- Integrated cryptographic hardware (vs PIC24FJ64GA002-I/SP)
- Exact package continuity within the GA202 family (vs PIC24FJ64GA202-I/MM)
- Memory and processing configuration (vs PIC24FJ64GA002-I/SP)
設計ノート
Use the Microchip 28-pin SPDIP footprint and follow the device pin-description table for VDD, VSS, MCLR, programming, oscillator, and I/O assignments. Keep the PCB layout roomy enough for through-hole insertion and soldering access, and verify the physical orientation mark against the package drawing. The SPDIP package simplifies prototyping but consumes more board area than the corresponding QFN option.
Implement the power, decoupling, and reset arrangement specified in the manufacturer hardware design guidance for the PIC24FJ64GA202 family. Place required bypass capacitors close to the appropriate supply pins, provide a reliable MCLR implementation, and confirm the regulator tolerances for 2.5 V or 3.3 V operation. Verify current consumption in active, idle, and sleep modes rather than estimating battery life from the maximum clock frequency alone.
Do not substitute PIC24FJ64GA202-I/MM for PIC24FJ64GA202-I/SP on an existing board: the former uses a 28-pin QFN package rather than the target’s 28-pin SPDIP footprint. Also distinguish the I/SP and E/SP temperature-grade order codes against the required environmental range. Review programming, clock, brownout, and peripheral assignments in the manufacturer documentation before approving a substitution.
コンプライアンス情報
The verified product and distributor listings do not state the requested compliance attributes. AEC-Q100 is not applicable because this is an industrial microcontroller rather than an automotive-qualified device.