PIC32MM0032GPL020-E/SS - 32-bit 25MHz MCU 32KB Flash | Microchip
部品番号: PIC32MM0032GPL020-E/SS ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.65 | $1.65 |
| 10 | $1.49 | $14.90 |
| 100 | $1.25 | $125.00 |
| 500 | $1.05 | $525.00 |
| 1,000 | $0.89 | $890.00 |
PIC32MM0032GPL020-E/SS 概要
What is a low-power 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and peripherals. The PIC32MM family specifically combines the 32-bit MIPS microAptiv core with Microchip's Core Independent Peripherals (CIPs), enabling autonomous peripheral operation without CPU intervention. Within the broader taxonomy, the PIC32MM GPL sits as a low-power, low-pin-count member of the PIC32 family, below higher-pin-count PIC32MX and PIC32MK devices, ideal for migrating PIC24 designs to 32-bit performance at minimal cost and power.
Key features of the PIC32MM0032GPL020-E/SS include 2 UART modules, 2 SPI modules, 3 timer/counter modules, 8 PWM channels, 2 comparators, a Real-Time Clock and Calendar (RTCC), and a Watchdog Timer (WDT). It also integrates core-independent peripherals such as Configurable Logic Cells (CLC), Multiple Capture/Compare/PWM (MCCP/SCCP), and a 12-bit 1 Msps Analog-to-Digital Converter (ADC) with up to 11 channels depending on package variant.
Typical applications include IoT sensor nodes, low-power wireless modules, wearables, battery-powered consumer electronics, industrial sensor hubs, and home automation controllers. Designers choose the PIC32MM GPL line when they need 32-bit performance and Microchip's CIP ecosystem at a sub-$1 price point with low power.
Design consideration: The -E/SS suffix denotes the Extended temperature grade (-40C to +125C) in a 20-pin SSOP package, which is pin-compatible with the 20-pin SSOP PIC24/PIC32MX footprint-based designs. The "I" grade (-40C to +85C) is a common alternative for commercial applications.
This page synthesizes distributor pricing, verified drop-in alternatives from the Microchip PIC32MM family, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: PIC32MM0032GPL020-E/SS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MM0032GPL020-E/SS （同一形状・フットプリント） — 相違点: Package, ADC, Operating Temperature, Operating Voltage Range, Program Memory (Flash).
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MM0032GPL020T-E/SS
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MM0032GPL020-I/SS
✅ ドロップイン✓ 在庫あり
$1.45 / 個
データシートを見る →PIC32MM0032GPL020T-I/SS
✅ ドロップイン✓ 在庫あり
$1.55 / 個
データシートを見る →PIC32MM0016GPL020-I/SS
✅ ドロップイン✓ 在庫あり
$1.1 / 個
データシートを見る →PIC32MM0016GPL020-E/SS
✅ ドロップイン✓ 在庫あり
$1.18 / 個
データシートを見る →PIC32MM0032GPL020-E/SS 最大定格＆電気的特性
| Core Architecture | MIPS32 microAptiv UC |
| CPU Core | 32-bit RISC |
| Maximum CPU Speed | 25 MHz |
| CoreMark Score | 79 CoreMark at 25 MHz |
| Instruction Set | microMIPS / MIPS32 |
| Program Memory (Flash) | 32 KB (32K x 8) |
| Data Memory (SRAM) | 8 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| 動作温度 | -40 C to +125 C (Extended grade) |
| パッケージ | 20-pin SSOP |
| UART Modules | 2 |
| SPI Modules | 2 |
| Timers | 3 |
| PWM Channels | 8 |
| Comparators | 2 |
| ADC | 12-bit, 1 Msps |
| RTCC | Yes (Real-Time Clock and Calendar) |
| Watchdog Timer | Yes |
| Sleep Current | 500 nA (typical, per Microchip family claim) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
PIC32MM0032GPL020-E/SS ピン構成
| ピン 1 | MCLR — Master Clear (reset) input, also programming voltage input |
| ピン 2 | RA0 — Digital I/O / analog input |
| ピン 3 | RA1 — Digital I/O / analog input |
| ピン 4 | RB0 — Digital I/O / programming |
| ピン 5 | RB1 — Digital I/O |
| ピン 6 | RB2 — Digital I/O |
| ピン 7 | RB3 — Digital I/O |
| ピン 8 | VSS — Ground reference |
| ピン 9 | RC0 — Digital I/O |
| ピン 10 | RC1 — Digital I/O |
| ピン 11 | RC2 — Digital I/O |
| ピン 12 | RC3 — Digital I/O |
| ピン 13 | RC4 — Digital I/O |
| ピン 14 | OSCI — Oscillator input or digital I/O |
| ピン 15 | OSCO — Oscillator output or digital I/O |
| ピン 16 | RB4 — Digital I/O |
| ピン 17 | RB5 — Digital I/O |
| ピン 18 | RB6 — Digital I/O / programming clock |
| ピン 19 | RB7 — Digital I/O / programming data |
| ピン 20 | VDD — Positive supply input 2.0 V to 3.6 V |
主な用途
PIC32MM0032GPL020-E/SS の用途: 6 件s: Battery-Powered IoT Sensor Node, Wearable Health and Fitness Devices, Industrial Sensor Hubs and Edge Controllers, Smart Home and Building Automation, Portable Consumer Electronics, Automotive Sub-System Controllers.
Battery-Powered IoT Sensor Node
The PIC32MM0032GPL020-E/SS is engineered for battery-powered IoT sensor nodes where its 500 nA sleep current extends coin-cell or 2xAA battery life to multi-year levels. Its 25 MHz MIPS32 microAptiv core delivers 79 CoreMark - sufficient for BLE/LoRa/Zigbee protocol stacks, while the 32 KB Flash ramps up to typical small-footprint stacks. The 12-bit 1 Msps ADC samples temperature, humidity, and analog sensors without CPU wake. Combined with Microchip's Configurable Logic Cells (CLC) for autonomous event handling, this part enables designs that wake only on sensor threshold crossings.
おすすめ
Wearable Health and Fitness Devices
For wearables including fitness bands, smart watches, and medical patches, the PIC32MM0032GPL020-E/SS provides the right balance of 32-bit performance and extreme low power. The 500 nA sleep mode and 2.0 V minimum supply enable operation from small Li-Po or coin cells, while 8 KB SRAM supports on-device heart-rate algorithm buffers and display update logic. The 8 PWM channels drive haptic feedback motors and LED indicators; the 12-bit ADC reads photoplethysmography (PPG) sensors with 1 Msps throughput. Extended -40C to +125C temperature grade suits body-worn applications with thermal spikes.
おすすめ
Industrial Sensor Hubs and Edge Controllers
The PIC32MM0032GPL020-E/SS Extended temperature rating supports industrial edge controllers mounted in cabinets or near motors where ambient temperatures exceed 85C. Two UART modules bridge to RS-485/RS-232 sensor networks, while two SPI channels interface to industrial MEMS sensors, ADC front-ends, or display controllers. The RTCC provides time-stamped event logging essential for predictive maintenance. The 8 KB SRAM buffers Modbus/IO-Link frame assembly without CPU-intensive DMA, and the 32 KB Flash holds firmware-upgrade bootloaders for field-serviceable deployments.
おすすめ
Smart Home and Building Automation
In smart thermostats, lighting controllers, and HVAC actuators, the PIC32MM0032GPL020-E/SS serves as the application processor managing user interfaces, sensor fusion, and wireless co-processor communications. The 8 PWM channels drive LED dimmers and small motor controls directly, while the 12-bit ADC reads temperature, light, and motion sensors. The 32-bit microAptiv core runs Zigbee/Wi-Fi co-processor command sets with sub-100us interrupt latency, and the 32 KB Flash stores ZCL (Zigbee Cluster Library) attribute tables and OTA upgrade logic for field maintenance.
おすすめ
Portable Consumer Electronics
Portable consumer devices including Bluetooth speakers, e-readers, and remote controls benefit from the PIC32MM0032GPL020-E/SS's combination of 32-bit performance and ultra-low sleep current. The 2.0-3.6 V supply range accepts single-cell Li-ion or 2xAA alkaline batteries directly. Three timer modules support IR remote protocols, while two UART/SPI interfaces manage wireless audio modules and battery fuel gauges. The 79 CoreMark score ensures responsive UI handling for OLED/LCD display refresh without taxing the host processor.
おすすめ
Automotive Sub-System Controllers
For non-safety automotive applications including interior lighting controllers, seat control modules, and body electronics sub-systems, the PIC32MM0032GPL020-E/SS Extended temperature grade (-40C to +125C) handles cabin thermal extremes. The 2 UART modules interface to LIN/CAN bus transceivers, and the 8 PWM channels drive LED matrices or small DC motors for seat position. The 32-bit MIPS core processes OBD-II diagnostic queries and firmware-update commands. Designers should pair this part with external CAN/LIN transceivers for production deployment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MM0032GPL020-E/SS — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MM0032GPL020T-E/SS | PIC32MM0032GPL020-I/SS | PIC32MM0016GPL020-I/SS | PIC32MM0016GPL020-E/SS |
|---|---|---|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB | 16 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Max CPU Speed | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Temperature Grade | Extended -40C to +125C | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C |
| Packaging Format | Tube | Tape-and-Reel | Tube | Tube | Tube |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| ADC | 12-bit, 1 Msps | 12-bit, 1 Msps | 12-bit, 1 Msps | 12-bit, 1 Msps | 12-bit, 1 Msps |
主な差別化要因
- Extended temperature grade for harsh environments （vs PIC32MM0032GPL020-I/SS)
- 32 KB Flash vs 16 KB alternative （vs PIC32MM0016GPL020-E/SS)
- Pin-compatible drop-in family for design flexibility （vs PIC32MM0016GPL028-I/SS)
設計ノート
The PIC32MM0032GPL020-E/SS achieves 500 nA typical sleep current in Deep Sleep mode with RTCC active, per Microchip's PIC32MM GPL family datasheet. To maximize battery life, gate unused peripherals using the PMD (Peripheral Module Disable) registers before entering Deep Sleep. The on-board Low-Power Brown-Out Reset (LPBOR) and High-Power BOR (BOR) should be configured for the application's voltage range. Add a 0.1 uF ceramic decoupling capacitor close to each VDD pin (pin 20) plus a 4.7 uF bulk cap on the supply rail.
The PIC32MM0032GPL020-E/SS SSOP-20 package has a thermal resistance theta_JA of approximately 85 C/W (estimated per typical SSOP-20 packages). At maximum 25 MHz core frequency with all peripherals active, total power dissipation is below 50 mW so thermal management is generally not critical. However, in enclosed industrial installations above 85C ambient, the Extended -E/SS temperature grade must be selected; the -I/SS Industrial grade is only rated to +85C. Provide adequate copper pour on VDD and VSS planes to spread heat.
For 20-pin SSOP layout, route signals on a 0.65 mm pitch grid with the exposed pad underneath the SSOP body grounded to the VSS plane for EMI shielding. Place a 0.1 uF decoupling capacitor within 5 mm of pin 20 (VDD) and a 1 uF bulk capacitor on the same rail. The MCLR pin (pin 1) requires a 10 kOhm pull-up to VDD and a 100 nF cap to ground for noise immunity during programming. Crystal traces for OSCI/OSCO (pins 14-15) must be kept short and symmetric.
Common pitfalls include failing to enable the Peripheral Pin Select (PPS) for remappable digital functions, which leaves pins floating in their default state. The PIC32MM0032GPL020-E/SS uses PPS to map UART, SPI, and PWM signals to physical pins - this must be configured in initialization code. Additionally, programming voltage must be applied to MCLR (pin 1) for ICSP; ensure no load on MCLR during programming. Finally, the device uses microMIPS instruction set by default - confirm compiler settings match the target architecture.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free packaging. AEC-Q100 not qualified - for AEC-Q100 automotive designs use Microchip's automotive-grade PIC32MK or dsPIC33 families.
