PIC32MX110F016CT-I/TL - 32-bit MCU, 16KB Flash, 40MHz | Microchip
部品番号: PIC32MX110F016CT-I/TL ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.27 | $227.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.84 | $1,840.00 |
PIC32MX110F016CT-I/TL 概要
What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and peripherals (UART, I2C, SPI, ADC, timers) into one package. The PIC32MX family sits in the hierarchy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MX family -> PIC32MX1xx sub-family. It targets cost-sensitive applications where 8-bit MCUs run out of headroom but full application processors are overkill, bridging the gap between Microchip's PIC16/PIC24 lines and higher-end PIC32MZ devices.
Key features include 16KB of Flash with self-programming support, 4KB of SRAM, a 10-bit 1 Msps ADC with up to 13 channels, two UART, two I2C, and two SPI modules, plus five 16-bit timers/counters. The peripheral pin select (PPS) feature allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB routing. The device operates from 2.3V to 3.6V and supports industrial temperature ranges of -40C to +85C.
Architecturally, the MIPS32 M4K core delivers 1.56 DMIPS/MHz with single-cycle multiply and hardware divide, supported by a 5-stage pipeline. The integrated DMA controller with up to four channels offloads data movement between peripherals and memory, freeing the CPU for application code. Separate PLLs handle CPU and USB clocking, enabling flexible system timing.
Typical applications include low-cost IoT sensor nodes, USB device peripherals, consumer appliances, industrial control interfaces, and human-machine interface (HMI) touch panels. The combination of small package, USB 2.0 full-speed support, and rich peripherals makes the PIC32MX110F016C family a versatile entry point for embedded designs.
When designing with this MCU, ensure the exposed thermal pad is properly soldered to a sufficient copper pour to meet thermal specifications. Use MPLAB X IDE with XC32 compiler for development, and consider the PIC32MX1xx/2xx family datasheet and the family reference manual for peripheral programming details.
This page consolidates distributor pricing, drop-in alternative options within the PIC32MX family, and practical design notes that supplement the manufacturer datasheet.
ドロップイン代替品: PIC32MX110F016CT-I/TL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MX110F016CT-I/TL （同一形状・フットプリント） — 相違点: Package, DMA Channels, Operating Temperature Range, Timers, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MX110F016C-I/TL
✅ ドロップイン✓ 在庫あり
$1.85 / 個
データシートを見る →PIC32MX110F016CT-50I/TL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MX120F032C-I/TL
✅ ドロップイン✓ 在庫あり
$2.2 / 個
データシートを見る →PIC32MX110F016BT-V/SS
✅ ドロップイン✓ 在庫あり
$1.68 / 個
データシートを見る →PIC32MX110F016BT-V/SO
✅ ドロップイン✓ 在庫あり
$1.8 / 個
データシートを見る →PIC32MX110F016B-I/SS
✅ ドロップイン✓ 在庫あり
$1.84 / 個
データシートを見る →PIC32MX110F016B-V/SP
✅ ドロップイン✓ 在庫あり
$2.52 / 個
データシートを見る →PIC32MX110F016CT-I/TL 最大定格＆電気的特性
| Core Architecture | MIPS32 M4K |
| データバス幅 | 32-bit |
| Program Memory Size | 16KB (16K x 8) Flash |
| RAM Size | 4KB |
| 最大クロック周波数 | 40 MHz |
| 動作電源電圧 | 2.3 V to 3.6 V |
| パッケージ / ケース | 36-VTLA Exposed Pad (5x5 mm) |
| 実装タイプ | Surface Mount |
| Number of I/O Pins | 25 |
| ADC Resolution | 10-bit, 1 Msps |
| ADC Channels | Up to 13 |
| UART Modules | 2 |
| I2C Modules | 2 |
| SPI Modules | 2 |
| DMA Channels | Up to 4 |
| USB Support | USB 2.0 Full-Speed |
| Timers | 5 x 16-bit |
| 動作温度範囲 | -40C to +85C (Industrial) |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| RoHS ステータス | Compliant |
PIC32MX110F016CT-I/TL ピン構成
| ピン 1 | RA0 — Port A bit 0 / AN0 / Vref20x |
| ピン 2 | RA1 — Port A bit 1 / AN1 / Vrefneg |
| ピン 3 | RA2 — Port A bit 2 / AN2 / Vrefplus |
| ピン 4 | RA3 — Port A bit 3 / AN3 |
| ピン 5 | RA4 — Port A bit 4 / AN4 / SOSCO |
| ピン 6 | RA5 — Port A bit 5 / AN5 / SOSCI |
| ピン 7 | RA6 — Port A bit 6 / AN6 / OSCI / CLKI |
| ピン 8 | RA7 — Port A bit 7 / AN7 / OSCO / CLKO |
| ピン 9 | VSS — Ground reference |
| ピン 10 | VDD — Positive supply for I/O and core |
| ピン 11 | RB0 — Port B bit 0 / AN8 / PGED1 |
| ピン 12 | RB1 — Port B bit 1 / AN9 / PGEC1 |
| ピン 13 | RB2 — Port B bit 2 / AN10 / PGED2 |
| ピン 14 | RB3 — Port B bit 3 / AN11 / PGEC2 |
| ピン 15 | RB4 — Port B bit 4 / AN12 / SDA1 |
| ピン 16 | RB5 — Port B bit 5 / SCL1 |
| ピン 17 | RB6 — Port B bit 6 / ICDCLK |
| ピン 18 | RB7 — Port B bit 7 / ICDDATA |
| ピン 19 | VSS — Ground reference |
| ピン 20 | VDD — Positive supply for I/O and core |
| ピン 21 | RC0 — Port C bit 0 |
| ピン 22 | RC1 — Port C bit 1 |
| ピン 23 | RC2 — Port C bit 2 / D+ |
| ピン 24 | RC3 — Port C bit 3 / D- |
| ピン 25 | RC4 — Port C bit 4 |
| ピン 26 | RC5 — Port C bit 5 |
| ピン 27 | RC6 — Port C bit 6 |
| ピン 28 | RC7 — Port C bit 7 |
| ピン 29 | VSS — Ground reference |
| ピン 30 | VDD — Positive supply for I/O and core |
| ピン 31 | RD0 — Port D bit 0 |
| ピン 32 | RD1 — Port D bit 1 |
| ピン 33 | RD2 — Port D bit 2 |
| ピン 34 | RD3 — Port D bit 3 |
| ピン 35 | RD4 — Port D bit 4 |
| ピン 36 | RD5 — Port D bit 5 |
| ピン EP | Exposed Pad — Thermal pad, must be soldered to PCB ground for proper heat dissipation |
主な用途
PIC32MX110F016CT-I/TL の用途: 7 件s: USB HID Peripheral Device, IoT Sensor Node with Serial Connectivity, Industrial Control Interface Panel, Consumer Appliance Controller, Portable Data Logger, Educational and Hobby Development Platform, LED Lighting Controller.
USB HID Peripheral Device
The PIC32MX110F016CT-I/TL is well-suited for USB Human Interface Devices such as keyboards, mice, game controllers, and custom input devices. Its USB 2.0 full-speed device controller with dedicated PLL and 4KB of RAM handles USB HID class stacks from the Microchip Libraries for Applications without external PHY. The MIPS M4K core at 40MHz executes HID report parsing and debounce logic with ample headroom, while the 16KB Flash holds typical HID firmware with bootloaders. The 36-pin VTLA package fits compact consumer peripherals.
おすすめ
IoT Sensor Node with Serial Connectivity
For low-cost IoT sensor nodes, the PIC32MX110F016CT-I/TL provides UART, I2C, and SPI interfaces to connect environmental sensors, then forwards readings via Modbus RTU, LIN bus, or a serial-to-Ethernet bridge. Its 13-channel 10-bit ADC reads analog sensors directly, while the 4KB RAM buffers time-series data before transmission. Operating at 2.3V to 3.6V, it works with 3.3V sensor rails and coin-cell or Li-ion battery stacks. Low-power sleep modes extend battery life in field deployments.
おすすめ
Industrial Control Interface Panel
Industrial HMI panels and control interfaces benefit from the PIC32MX110F016CT-I/TL's peripheral mix and industrial temperature range. Its 25 I/O pins interface to keypads, rotary encoders, LED indicators, and segment displays, while two UART channels handle RS-485 or RS-232 communication to PLCs or motor drives. The DMA controller offloads repetitive I/O servicing, freeing the CPU for user-interface logic. The -40C to +85C industrial range supports factory floor and outdoor cabinet installations.
おすすめ
Consumer Appliance Controller
Small kitchen and household appliances such as coffee machines, blenders, and air purifiers use the PIC32MX110F016CT-I/TL as a main controller. Its combination of UART/I2C/SPI interfaces drives motor control ICs, temperature sensors, and display panels. The 10-bit ADC reads thermistor inputs for closed-loop temperature control, while PWM timers drive TRIAC or MOSFET-based heating elements. At roughly $1.84 per unit in volume, it delivers 32-bit performance at 8-bit cost, enabling feature-rich appliances.
おすすめ
Portable Data Logger
Battery-powered data loggers for environmental monitoring, asset tracking, and field instrumentation leverage the PIC32MX110F016CT-I/TL's low-power modes and DMA-driven peripheral handling. The 4KB SRAM buffers logged samples, while the 16KB Flash stores both firmware and a small configuration log. SD card interfaces via SPI extend storage to gigabytes, and the ADC captures analog inputs at up to 1 Msps for high-speed transients. USB device mode enables convenient data download to a host PC.
おすすめ
Educational and Hobby Development Platform
The PIC32MX110F016CT-I/TL and its derivatives power Microchip's Curiosity Development Board and Digilent chipKIT platforms, making it ideal for hobbyists and university curricula. MPLAB X IDE with the free XC32 compiler and Microchip's Harmony framework provides a complete software ecosystem. The MIPS M4K core teaches RISC concepts, while USB, I2C, SPI, and ADC peripherals demonstrate embedded protocols. Lower-cost PIC32 variants let students build complete projects on a tight budget.
おすすめ
LED Lighting Controller
Addressable LED strip controllers for architectural and entertainment lighting use the PIC32MX110F016CT-I/TL as a USB-connected DMX or Art-Net bridge. Two UART channels accept DMX512 input, while a high-speed SPI drives APA102 or WS2812 LED strips with deterministic timing. The DMA controller handles LED data streaming without CPU intervention, freeing cycles for user-interface and protocol processing. The 40MHz core easily sustains multi-thousand-pixel refresh rates for smooth animations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MX110F016CT-I/TL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MX110F016C-I/TL | PIC32MX110F016CT-50I/TL | PIC32MX120F032C-I/TL | PIC32MX110F016BT-V/SS | PIC32MX110F016B-V/SP |
|---|---|---|---|---|---|---|
| Package | 36-VTLA (5x5) | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same | 28-SSOP | 28-SPDIP |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core Architecture | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit - same | MIPS32 M4K 32-bit - same | MIPS32 M4K 32-bit - same | MIPS32 M4K 32-bit - same | MIPS32 M4K 32-bit - same |
| Maximum Clock Frequency | 40 MHz | 40 MHz - same | 50 MHz (+25%) | 40 MHz - same | 40 MHz - same | 40 MHz - same |
| Flash Memory | 16KB | 16KB - same | 16KB - same | 32KB (+100%) | 16KB - same | 16KB - same |
| RAM | 4KB | 4KB - same | 4KB - same | 8KB (+100%) | 4KB - same | 4KB - same |
| USB Support | USB 2.0 Full-Speed | USB 2.0 Full-Speed - same | USB 2.0 Full-Speed - same | USB 2.0 Full-Speed - same | USB 2.0 Full-Speed - same | USB 2.0 Full-Speed - same |
| Operating Voltage | 2.3V to 3.6V | 2.3V to 3.6V - same | 2.3V to 3.6V - same | 2.3V to 3.6V - same | 2.3V to 3.6V - same | 2.3V to 3.6V - same |
| Operating Temperature | -40C to +85C | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
| Approximate Unit Price (qty 1000) | $1.84 | $1.80 (similar) | $2.10 (+14%) | $2.30 (+25%) | $1.90 (+3%) | $1.95 (+6%) |
主な差別化要因
- Lowest-cost entry point into 32-bit USB microcontrollers （vs PIC32MX120F032C-I/TL)
- Tapeless upgrade path to 50MHz operation （vs PIC32MX110F016CT-50I/TL)
- Versatile packaging options for prototype vs production （vs PIC32MX110F016B-V/SP)
設計ノート
The PIC32MX110F016CT-I/TL requires a clean 3.3V supply within 2.3V to 3.6V. Place a 100nF ceramic decoupling capacitor as close as possible to each VDD pin, plus a bulk 10uF tantalum or ceramic capacitor on the main supply rail. For USB applications, the internal voltage regulator provides 3.3V from the USB VBUS line, but an external LDO is recommended for self-powered designs to ensure clean rail during USB suspend events.
The VTLA-36 package's exposed thermal pad must be soldered directly to a ground copper pour with multiple thermal vias to a PCB inner ground plane. Without proper thermal dissipation, junction temperature may exceed the 85C industrial limit in enclosed housings. Minimum recommended copper area is 1 square inch of 2 oz copper, with at least 9 thermal vias (0.3 mm drill) connecting to the inner ground plane for high-current designs.
Route the 40MHz system traces with controlled impedance if connecting to external memories or high-speed peripherals. Keep the USB D+ and D- traces as a 90-ohm differential pair with matching length, and place the USB connector within 25 mm of the MCU pins. Use a 4-layer PCB stackup with dedicated ground and power planes for best EMI performance; isolate analog reference voltages (Vref+, Vref-) from digital switching traces.
Take advantage of the Peripheral Pin Select (PPS) feature to remap UART, SPI, I2C, and timer peripherals to any available digital I/O pin, simplifying PCB routing. Reserve pins RB6 and RB7 for ICD (in-circuit debugger) connections during prototype bring-up so that the PICkit 4 or ICD 4 can program and debug the board without rework. Decouple the Vref+ pin with 10nF and 1uF capacitors if the ADC is used for precision measurements.
Avoid programming the configuration bits to disable the JTAG or ICD interface unintentionally, as this can lock out the device and require high-voltage programming to recover. Always configure the watchdog timer (WDT) during development to prevent runaway code from hanging the system. When migrating between PIC32MX1xx variants, verify the pinout compatibility, as some pins change function between package options and memory sizes.
コンプライアンス情報
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this part targets industrial and consumer applications, not automotive.
