PIC32MZ1024EFM100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip
部品番号: PIC32MZ1024EFM100T-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $11.5 | $11.50 |
| 10 | $10.35 | $103.50 |
| 100 | $9.2 | $920.00 |
| 500 | $8.3 | $4,150.00 |
| 1,000 | $7.55 | $7,550.00 |
PIC32MZ1024EFM100T-I/PT 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory (Flash), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIOs. Within the broader semiconductor taxonomy, this PIC32 part belongs to the high-performance MIPS-based 32-bit MCU family, which sits above 8-bit/16-bit microcontrollers in capability and below application processors in software complexity. PIC32MZ EF devices target connectivity-rich embedded applications.
Key features of the PIC32MZ1024EFM100T-I/PT include a 12-bit 18 MSPS ADC with up to 48 analog channels, two CAN 2.0b modules, 10/100 Mbps Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG, six UART, three SPI, four I2C, a parallel master port (PMP) for graphics, and a 9-layer AHB bus matrix for high-throughput DMA. The wide operating voltage of 2.1 V to 3.6 V and industrial -40C to +85C temperature range suit harsh industrial and IoT deployments.
Architecturally, the device combines a deterministic MIPS32 core with an integrated Crypto engine and a high-bandwidth bus fabric, allowing encrypted communication, secure boot, and parallel graphics display without external co-processors. The embedded FPU and DSP extensions accelerate signal-processing algorithms for motor control, audio codecs, and DSP front-ends.
Typical applications include industrial control and HMI, IoT gateways with secure Ethernet/USB connectivity, automotive aftermarket infotainment, motor control (BLDC/PMSM), and graphical user interfaces via PMP or SPI displays. The on-chip crypto engine makes the part particularly attractive for secure connected nodes.
For designs that require a wider temperature range or larger Flash, consider the PIC32MZ1024EFM100T-E/PT (-40C to +125C) or the 2 MB Flash EFK variant. Crypto features are mandatory for TLS/DTLS offload and secure firmware update pipelines.
This page synthesizes distributor stock, real-time pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, so engineers can evaluate supply and second-source options in one place.
ドロップイン代替品: PIC32MZ1024EFM100T-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MZ1024EFM100T-I/PT （同一形状・フットプリント） — 相違点: Package, ADC, Core Architecture, Crypto Engine, MSL Level.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MZ1024EFM100T-E/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ1024EFM100-I/PT
✅ ドロップイン✓ 在庫あり
$6.3 / 個
データシートを見る →PIC32MZ1024EFK100T-I/PT
✅ ドロップイン✓ 在庫あり
$7.85 / 個
データシートを見る →PIC32MZ1024EFG100T-I/PT
✅ ドロップイン✓ 在庫あり
$6.1 / 個
データシートを見る →PIC32MZ1024EFE100T-I/PT
✅ ドロップイン✓ 在庫あり
$6.78 / 個
データシートを見る →PIC32MZ1024EFM100T-I/PT 最大定格＆電気的特性
| Core Architecture | MIPS32 microAptiv M-Class with FPU and DSP |
| Core Frequency | 200 MHz (330 DMIPS) |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 512 KB |
| Operating Voltage Range | 2.1 V to 3.6 V |
| 動作温度範囲 | -40C to +85C (Industrial) |
| ADC | 12-bit, up to 18 MSPS, up to 48 channels |
| Crypto Engine | AES, DES, 3DES, SHA-1, SHA-256, RSA |
| Communication | 2x CAN 2.0b, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC (MII/RMII), 6x UART, 3x SPI, 4x I2C |
| パッケージ | 100-pin TQFP (12x12 mm) |
| 実装タイプ | Surface Mount |
| MSLレベル | 3 (168 hours) |
| RoHS ステータス | Compliant |
| Lead-Free / Halogen-Free | Yes |
| Suffix | T = Tape & Reel, I = Industrial -40C to +85C, /PT = 100-TQFP 12x12 mm |
PIC32MZ1024EFM100T-I/PT 100-pin tqfp (12x12 mm) ピン配置ガイド
PIC32MZ1024EFM100T-I/PT (100-pin tqfp (12x12 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC32MZ1024EFM100T-I/PT.
詳細は データシート をご参照ください。
主な用途
PIC32MZ1024EFM100T-I/PT の用途: 6 件s: Industrial IoT Gateways, Automotive Aftermarket Infotainment, BLDC / PMSM Motor Control, Graphical HMI Displays, Secure Connected Sensors, Audio DSP Front-Ends.
Industrial IoT Gateways
The PIC32MZ1024EFM100T-I/PT is engineered for industrial IoT edge gateways because it integrates 10/100 Ethernet MAC, USB High-Speed OTG, dual CAN 2.0b, and a hardware crypto engine on a single 200 MHz MIPS core. The 1 MB Flash and 512 KB SRAM comfortably host TLS/DTLS stacks plus MQTT, Modbus, and CANopen protocol translators without external memory. The integrated AES/SHA/RSA engine accelerates TLS handshakes, while the industrial -40C to +85C rating handles factory-floor thermal stress. Compared with a discrete MCU+external crypto part, the PIC32MZ1024EFM100T-I/PT reduces BOM cost and PCB area by combining connectivity, security, and DSP-grade compute on one die.
おすすめ
Automotive Aftermarket Infotainment
The PIC32MZ1024EFM100T-I/PT's dual CAN 2.0b controllers and USB High-Speed OTG are ideal for automotive aftermarket head units and telematics dongles that bridge the in-vehicle CAN bus to Wi-Fi/cellular links. The hardware crypto engine secures OTA firmware updates and vehicle-to-cloud communication, while the 12-bit 18 MSPS ADC samples analog sensors and audio inputs without an external codec. The 100-pin TQFP 12x12 mm footprint fits compact aftermarket enclosures, and the industrial temperature range covers most in-cabin environments. Engineers can reuse existing PIC32 firmware libraries and the MPLAB Harmony framework to accelerate time-to-production.
おすすめ
BLDC / PMSM Motor Control
The PIC32MZ1024EFM100T-I/PT delivers the deterministic real-time performance needed for field-oriented control (FOC) of brushless DC and permanent-magnet synchronous motors. The 200 MHz MIPS core with FPU and DSP extensions computes Park/Clarke transforms and PI loops in microseconds, while the integrated 12-bit 18 MSPS ADC samples three-phase currents simultaneously for sensorless FOC. PWM outputs from the 100-pin TQFP drive external three-phase gate drivers directly. The 512 KB SRAM holds large observer and lookup tables without external memory, and the hardware crypto engine can secure parameter logs and motor firmware.
おすすめ
Graphical HMI Displays
The PIC32MZ1024EFM100T-I/PT's Parallel Master Port (PMP) and integrated graphics peripherals drive TFT LCDs up to WQVGA resolution without an external graphics controller. The 1 MB Flash stores full-frame bitmaps and localized fonts for international HMI deployments, while the 512 KB SRAM keeps a partial framebuffer in-chip. The USB High-Speed OTG port supports touch-screen firmware updates from a host PC, and the 200 MHz core accelerates anti-aliased drawing primitives in firmware. Compared with a host CPU + external framebuffer architecture, this single-chip approach reduces BOM cost and PCB complexity.
おすすめ
Secure Connected Sensors
The PIC32MZ1024EFM100T-I/PT is well-suited to secure connected sensor nodes because the hardware AES/SHA/RSA engine offloads encrypted telemetry without burdening the MIPS core. The 12-bit ADC digitizes up to 48 analog channels for multi-sensor boards, while the integrated Ethernet MAC and USB OTG ports stream data to gateways over wired links. The 1 MB Flash fits full TLS client stacks, X.509 certificates, and signed firmware images. Industrial -40C to +85C operation suits outdoor and factory deployments, and the 100-pin TQFP footprint is compatible with hand-solderable prototypes as well as high-volume SMT lines.
おすすめ
Audio DSP Front-Ends
The PIC32MZ1024EFM100T-I/PT's DSP extensions and FPU accelerate audio codec processing, equalization, and noise-suppression algorithms in firmware. The 12-bit 18 MSPS ADC captures stereo audio at CD-quality sample rates, while the integrated crypto engine secures DRM-protected audio streams over USB or Ethernet. With 1 MB Flash and 512 KB SRAM, designers can host full audio stacks and DSP filter tables without external memory. The 100-pin TQFP 12x12 mm footprint fits compact audio dongles and prosumer audio gear. Compared with a dedicated DSP chip plus microcontroller, the single-chip approach simplifies firmware scheduling.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MZ1024EFM100T-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MZ1024EFM100T-E/PT | PIC32MZ1024EFM100-I/PT | PIC32MZ1024EFK100T-I/PT | PIC32MZ1024EFG100T-I/PT | PIC32MZ1024EFE100T-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same |
| Flash | 1 MB | 1 MB | 1 MB | 2 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Crypto Engine | Yes (AES/SHA/RSA) | Yes (AES/SHA/RSA) | Yes (AES/SHA/RSA) | Yes (AES/SHA/RSA) | Yes (AES/SHA/RSA) | No |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Packaging Form | Tape & Reel | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
主な差別化要因
- Integrated hardware crypto engine without external BOM （vs PIC32MZ1024EFE100T-I/PT)
- 1 MB Flash matches target firmware footprint without external memory （vs PIC32MZ1024EFM064T-I/PT)
- Industrial temperature rating with widest firmware margin （vs PIC32MX795F512LT-80I/PT)
設計ノート
The PIC32MZ1024EFM100T-I/PT requires a regulated 2.1 V to 3.6 V supply on VDD pins with a 1 uF + 0.1 uF decoupling pair placed within 5 mm of each VDD cluster. Core logic and I/O share the same rail; add a ferrite bead if the analog AVDD rail is generated from the same source. Bulk capacitance of at least 10 uF is recommended at the regulator output to handle USB High-Speed burst currents. Use a low-dropout regulator such as MCP1825 for predictable behavior at low VIN.
Route the 50 MHz Ethernet MII/RMII signals as 50-ohm controlled-impedance traces of matched length, keeping them away from switching nodes. Place the external 25 MHz crystal within 5 mm of the OSC1/OSC2 pins with a solid ground plane underneath. The USB DP/DM pair requires 90-ohm differential impedance. For the 100-pin TQFP, allocate at least a 4-layer PCB with continuous ground plane to meet EMC and thermal requirements at 200 MHz operation.
Estimated: at 200 MHz core clock with peripherals active, core current consumption is approximately 70-90 mA. With VDD = 3.3 V and typical industrial -40C to +85C ambient, the 100-pin TQFP package (theta_JA around 50 C/W) keeps the junction temperature rise below 30 C, well within the 125 C limit. For sealed enclosures with limited airflow, derate clock frequency or add a thermal copper pour beneath the exposed pad region to maintain margin.
Do not omit the external 4.7 kohm pull-up on the SDA/SCL lines for I2C, even when the PIC32MZ internal pull-ups are enabled - the internal pull-ups are weak and may violate the I2C specification. When using the USB High-Speed OTG transceiver, ensure VBUS is monitored with the on-chip comparator and that the 10 uF VBUS capacitor is placed close to the VBUS pin. Avoid driving the analog ADC inputs above AVDD by more than 0.3 V to prevent ESD latch-up events.
コンプライアンス情報
RoHS and REACH compliance per Microchip product page. Industrial-grade part (-40C to +85C); AEC-Q100 grade is not in the standard MPN suffix - select PIC32MZ1024EFM100T-E/PT for extended-temp or contact factory for AEC-Q100 variants.
