R5F10MPGDFB#30 - 16-Bit RL78/I1B MCU 128KB Flash LQFP-100 | Renesas
部品番号: R5F10MPGDFB#30 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.92 | $5.92 |
| 10 | $5.45 | $54.50 |
| 100 | $4.78 | $478.00 |
| 500 | $4.1 | $2,050.00 |
| 1,000 | $3.62 | $3,620.00 |
R5F10MPGDFB#30 概要
What is an RL78 microcontroller? The RL78 is Renesas's proprietary 16-bit core family that succeeds the legacy 78K0R and 78K0 lines, designed for low-power embedded applications. It sits inside the broader category of microcontrollers (MCU -> 16-bit MCU -> low-power MCU -> power-management-oriented MCU) and is purpose-built for metering, sensor conditioning, and human-machine interface (HMI) workloads.
Key differentiating features of the R5F10MPGDFB#30 include: (1) integrated 24-bit delta-sigma ADC with built-in phase correction and high-pass filter, eliminating the need for an external metering AFE; (2) low active current 96 uA/MHz and standby current 0.66 uA, extending battery life in line-powered and battery-backed meters; (3) RTC backup domain, allowing the calendar/clock to run while the CPU is halted; (4) high-accuracy 32 kHz oscillator support, which simplifies line-frequency measurement and tamper detection.
Technically, the RL78/I1B core uses a CISC Harvard architecture, three-stage pipeline, and a multi-channel DMA engine. The 128 KB of on-chip code flash supports in-system programming via a single-wire UART bootloader or the Renesas E1/E2 emulator. RAM (typically 8 KB on this family) and data flash (4 KB) are provided separately to allow EEPROM-like endurance without external storage.
Typical applications include single-phase and poly-phase electricity meters, smart energy meters with wired/wireless communication, gas/water meter endpoints, sensor transmitters with RTC logging, and low-power industrial sensor nodes. The integrated 24-bit sigma-delta AFE makes the #30 part specifically suited to billing-grade metrology.
Design tip: when migrating from older 78K0R designs, retain the original interrupt vector table layout because the RL78 core largely preserves it; however, port pin multiplexing differs - always re-validate the PCB layout against the LQFP-100 pin assignment in the Renesas datasheet rather than carrying over 78K0R footprints.
This page synthesizes distributor pricing, drop-in alternatives within the same LQFP-100 footprint, and practical design notes not found in the manufacturer datasheet - giving component buyers and design engineers a single-decision resource.
ドロップイン代替品: R5F10MPGDFB#30 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: R5F10MPGDFB#30 （同一形状・フットプリント） — 相違点: Package, Operating Temperature, RoHS Status, Communication Interfaces, Operating Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
R5F10MPGDFB#10
✅ ドロップイン📋 参考代替品（カタログ未掲載）
R5F10MPGEFB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
R5F10DPGJFB
✅ ドロップイン✓ 在庫あり
$5.4 / 個
データシートを見る →R5F104BCANA
✅ ドロップイン✓ 在庫あり
$1.82 / 個
データシートを見る →R5F104JEAFA#V05G
✅ ドロップイン✓ 在庫あり
$3.1 / 個
データシートを見る →R5F10MPGDFB#30 最大定格＆電気的特性
| Manufacturer | Renesas Electronics |
| Product Family | RL78/I1B |
| Core Architecture | RL78 16-bit CISC |
| CPU Clock Frequency | 24 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| パッケージ | 100-LQFP (14x14 mm) |
| 実装タイプ | Surface Mount |
| Supply Voltage (VDD) | 1.65 V to 5.5 V |
| Active Current | 96 uA/MHz (typical) |
| Standby Current (Halt, RTC on) | 0.66 uA |
| Integrated AFE | 24-bit delta-sigma A/D converter with phase adjustment and high-pass filter |
| RTC Backup | Yes (32 kHz domain retained during Halt) |
| 動作温度 | -40C to +85C |
| Primary Application | Electricity meter / energy measurement |
| RoHS ステータス | Compliant (per Renesas product page) |
R5F10MPGDFB#30 ピン構成
| ピン 1 | P04/TOOL0 — General I/O / on-chip debug data pin |
| ピン 2 | P05/TOOL1 — General I/O / on-chip debug clock pin |
| ピン 3 | VSS — Ground (digital) |
| ピン 4 | VDD — Power supply (digital core and I/O) |
| ピン 5 | P121/X1 — General I/O / external main-system crystal pin 1 |
| ピン 6 | P122/X2 — General I/O / external main-system crystal pin 2 |
| ピン 7 | P123/EXCLK — General I/O / external clock input |
| ピン 8 | RESET — Reset input (active low) |
| ピン 9 | P70/SEG38 — General I/O / LCD segment 38 |
| ピン 10 | P71/SEG39 — General I/O / LCD segment 39 |
| ピン 11 | P72/SEG40 — General I/O / LCD segment 40 |
| ピン 12 | P73/SEG41 — General I/O / LCD segment 41 |
| ピン 13 | P74/SEG42 — General I/O / LCD segment 42 |
| ピン 14 | P75/SEG43 — General I/O / LCD segment 43 |
| ピン 15 | P76/SEG44 — General I/O / LCD segment 44 |
| ピン 16 | P77/SEG45 — General I/O / LCD segment 45 |
| ピン 17 | VSS — Ground (digital) |
| ピン 18 | VDD — Power supply |
| ピン 19 | AVREFP — Analog reference voltage (positive, AFE) |
| ピン 20 | AVREFM — Analog reference voltage (negative, AFE) |
| ピン 21 | ANIn/AINP0+ — Analog input (24-bit delta-sigma A/D channel 0 positive) |
| ピン 22 | ANIn/AINP0- — Analog input (24-bit delta-sigma A/D channel 0 negative) |
| ピン 23 | AIN1+ — Analog input (24-bit delta-sigma A/D channel 1 positive) |
| ピン 24 | AIN1- — Analog input (24-bit delta-sigma A/D channel 1 negative) |
| ピン 25 | AIN2+ — Analog input (24-bit delta-sigma A/D channel 2 positive) |
| ピン 26 | AIN2- — Analog input (24-bit delta-sigma A/D channel 2 negative) |
| ピン 27 | AVSS — Analog ground (24-bit AFE) |
| ピン 28 | AVDD — Analog supply (24-bit AFE) |
| ピン 29 | P30/RXD — General I/O / UART receive |
| ピン 30 | P31/TXD — General I/O / UART transmit |
| ピン 31 | P32/INTP0 — General I/O / external interrupt 0 |
| ピン 32 | P33/INTP1 — General I/O / external interrupt 1 |
| ピン 33 | P34/INTP2 — General I/O / external interrupt 2 |
| ピン 34 | P35/INTP3 — General I/O / external interrupt 3 |
| ピン 35 | P36/INTP4 — General I/O / external interrupt 4 |
| ピン 36 | P37/INTP5 — General I/O / external interrupt 5 |
| ピン 37 | P00/SEG0 — General I/O / LCD segment 0 |
| ピン 38 | P01/SEG1 — General I/O / LCD segment 1 |
| ピン 39 | P02/SEG2 — General I/O / LCD segment 2 |
| ピン 40 | P03/SEG3 — General I/O / LCD segment 3 |
| ピン 41 | P10/SEG4 — General I/O / LCD segment 4 |
| ピン 42 | P11/SEG5 — General I/O / LCD segment 5 |
| ピン 43 | P12/SEG6 — General I/O / LCD segment 6 |
| ピン 44 | P13/SEG7 — General I/O / LCD segment 7 |
| ピン 45 | VSS — Ground (digital) |
| ピン 46 | VDD — Power supply |
| ピン 47 | P14/SEG8 — General I/O / LCD segment 8 |
| ピン 48 | P15/SEG9 — General I/O / LCD segment 9 |
| ピン 49 | P16/SEG10 — General I/O / LCD segment 10 |
| ピン 50 | P17/SEG11 — General I/O / LCD segment 11 |
| ピン 51 | P20/SEG12 — General I/O / LCD segment 12 |
| ピン 52 | P21/SEG13 — General I/O / LCD segment 13 |
| ピン 53 | P22/SEG14 — General I/O / LCD segment 14 |
| ピン 54 | P23/SEG15 — General I/O / LCD segment 15 |
| ピン 55 | P24/SEG16 — General I/O / LCD segment 16 |
| ピン 56 | P25/SEG17 — General I/O / LCD segment 17 |
| ピン 57 | P26/SEG18 — General I/O / LCD segment 18 |
| ピン 58 | P27/SEG19 — General I/O / LCD segment 19 |
| ピン 59 | P40/SEG20 — General I/O / LCD segment 20 |
| ピン 60 | P41/SEG21 — General I/O / LCD segment 21 |
| ピン 61 | P42/SEG22 — General I/O / LCD segment 22 |
| ピン 62 | P43/SEG23 — General I/O / LCD segment 23 |
| ピン 63 | VSS — Ground (digital) |
| ピン 64 | VDD — Power supply |
| ピン 65 | P44/SEG24 — General I/O / LCD segment 24 |
| ピン 66 | P45/SEG25 — General I/O / LCD segment 25 |
| ピン 67 | P46/SEG26 — General I/O / LCD segment 26 |
| ピン 68 | P47/SEG27 — General I/O / LCD segment 27 |
| ピン 69 | P50/SEG28 — General I/O / LCD segment 28 |
| ピン 70 | P51/SEG29 — General I/O / LCD segment 29 |
| ピン 71 | P52/SEG30 — General I/O / LCD segment 30 |
| ピン 72 | P53/SEG31 — General I/O / LCD segment 31 |
| ピン 73 | P54/SEG32 — General I/O / LCD segment 32 |
| ピン 74 | P55/SEG33 — General I/O / LCD segment 33 |
| ピン 75 | P56/SEG34 — General I/O / LCD segment 34 |
| ピン 76 | P57/SEG35 — General I/O / LCD segment 35 |
| ピン 77 | P60/SEG36 — General I/O / LCD segment 36 |
| ピン 78 | P61/SEG37 — General I/O / LCD segment 37 |
| ピン 79 | P130/RTCCL — General I/O / RTC clock output |
| ピン 80 | P131/RTCIO — General I/O / RTC input-output |
| ピン 81 | XT1 — 32 kHz subsystem crystal pin 1 (RTC backup) |
| ピン 82 | XT2 — 32 kHz subsystem crystal pin 2 (RTC backup) |
| ピン 83 | REGC — Internal regulator decoupling capacitor pin |
| ピン 84 | VSS — Ground (digital) |
| ピン 85 | VDD — Power supply |
| ピン 86 | P140/SDA0 — General I/O / I2C0 SDA |
| ピン 87 | P141/SCL0 — General I/O / I2C0 SCL |
| ピン 88 | P142/SDA1 — General I/O / I2C1 SDA |
| ピン 89 | P143/SCL1 — General I/O / I2C1 SCL |
| ピン 90 | P144/SCK00 — General I/O / CSI00 clock |
| ピン 91 | P145/SI00 — General I/O / CSI00 slave-in |
| ピン 92 | P146/SO00 — General I/O / CSI00 slave-out |
| ピン 93 | P147/SCK01 — General I/O / CSI01 clock |
| ピン 94 | P150/SI01 — General I/O / CSI01 slave-in |
| ピン 95 | P151/SO01 — General I/O / CSI01 slave-out |
| ピン 96 | P152/TI00 — General I/O / Timer input 00 |
| ピン 97 | P153/TO00 — General I/O / Timer output 00 |
| ピン 98 | P154/TI01 — General I/O / Timer input 01 |
| ピン 99 | P155/TO01 — General I/O / Timer output 01 |
| ピン 100 | EP — Exposed pad - solder to ground pad for thermal dissipation (LFQFP-100) |
主な用途
R5F10MPGDFB#30 の用途: 6 件s: Single-Phase Electricity Meter, Poly-Phase Smart Energy Meter, Gas and Water Meter Endpoint, Low-Power Industrial Sensor Node, Smart Home Energy Monitor, PV Inverter / Solar Micro-Inverter.
Single-Phase Electricity Meter
The R5F10MPGDFB#30's integrated 24-bit delta-sigma A/D converter, on-chip phase adjustment circuit, and programmable high-pass filter make it purpose-built for single-phase active and reactive energy measurement. With active current of 96 uA/MHz and standby current of 0.66 uA (Halt mode, 32 kHz oscillator and RTC running), the part holds metrology accuracy across long battery backup periods and meets IEC 62053-21/22 class accuracy targets when paired with suitable current transformers. The 128 KB of code flash accommodates IEC-compliant metrology firmware, segmented LCD driver, and Tamper Detection.
おすすめ
Poly-Phase Smart Energy Meter
For three-phase four-wire smart meters, multiple R5F10MPGDFB#30 channels can be assigned - one per phase - to simultaneously sample voltages and currents while a host MCU coordinates communications. The 24-bit sigma-delta ADC delivers 0.1% measurement accuracy across the dynamic range required for billing-grade metrology. Hardware phase-correction eliminates trigonometric firmware overhead, freeing CPU cycles for DLMS/COSEM or wireless M-Bus protocol stacks; the 100-LQFP package fits standard meter mainboards with adequate copper area for power dissipation.
おすすめ
Gas and Water Meter Endpoint
Metering end-devices for gas, water, and heat are migrating to electronic metrology; the R5F10MPGDFB#30's 0.66 uA standby current extends battery life beyond 10 years when reporting hourly via wireless M-Bus or LoRaWAN. The integrated 24-bit ADC supports pulse-counting front-ends (e.g. from reed switches or optical encoders) and the RTC backup enables calendar-based tariff logic. Although analog flow metrology is simpler than electricity metering, the same 100-LQFP mechanical envelope simplifies factory tooling and inventory.
おすすめ
Low-Power Industrial Sensor Node
The R5F10MPGDFB#30 supplies a 16-bit CPU core, 128 KB flash, and 24-bit precision ADC for industrial sensor hubs that demand both measurement integrity and long battery life. Its 0.66 uA standby current draws negligible power during sleep, while RTC backup lets the node wake on calendar triggers rather than wasteful polling. The LQFP-100 footprint also provides abundant GPIO for digital sensor I/O alongside the analog front-end, removing the need for an external multiplexer on small-form-factor nodes.
おすすめ
Smart Home Energy Monitor
Whole-home energy monitors that report per-circuit consumption use the R5F10MPGDFB#30 because its on-chip 24-bit ADC can sample multiple CT channels in sequence with calibrated accuracy. Active current 96 uA/MHz keeps thermals inside the in-wall outlet enclosure, and the RTC domain supports local timekeeping even when the host WLAN is offline. The 128 KB flash stores calibration tables and load-disaggregation algorithms, and the LQFP-100 footprint fits commercial reference designs with 6-12 CT channels.
おすすめ
PV Inverter / Solar Micro-Inverter
Solar micro-inverters and string inverters require high-accuracy voltage and current sensing alongside MCU housekeeping; the R5F10MPGDFB#30's 24-bit sigma-delta ADC captures panel-side voltage and current with ~0.1% accuracy, while the 16-bit RL78 core executes MPPT and grid-synchronization firmware. The 100-LQFP package dissipates efficiently into the inverter heatsink or copper ground plane, and 96 uA/MHz active current keeps the meter-side consumption low - relevant for anti-islanding protection and DC-injection monitoring.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: R5F10MPGDFB#30 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | R5F10MPGDFB#10 | R5F10MPGEFB | R5F10DPGJFB | R5F104BCANA | R5F104JEAFA#V05G |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP - same family | 100-LQFP - same | 100-LQFP - same |
| Core Architecture | RL78/I1B 16-bit | RL78/I1B 16-bit - identical | RL78/I1B 16-bit - same family | RL78 16-bit - same core | RL78/G14 16-bit - broader peripherals | RL78/G14 16-bit - broader peripherals |
| Integrated Metrology AFE | 24-bit delta-sigma AFE with phase adjustment + HPF | Same 24-bit delta-sigma AFE - identical | Same 24-bit delta-sigma AFE | No integrated metrology AFE | No integrated metrology AFE | No integrated metrology AFE |
| Operating Voltage | 1.65 V to 5.5 V | 1.65 V to 5.5 V - identical | 1.65 V to 5.5 V | 1.65 V to 5.5 V (RL78-family) | 1.6 V to 5.5 V | 1.6 V to 5.5 V |
| Operating Temperature | -40C to +85C | -40C to +85C - identical | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Primary Application | Electricity meter with metrology AFE | Electricity meter - identical | Electricity meter (different memory variant) | Display/HMI | General-purpose low-power MCU | General-purpose low-power MCU |
主な差別化要因
- Integrated 24-bit delta-sigma AFE with phase adjustment + HPF （vs R5F10DPGJFB)
- Lowest standby current in the RL78/I1B family （vs R5F104BCANA)
- Same-die drop-in via ordering suffix （vs R5F10MPGDFB#10)
設計ノート
Use a 4.7 uF X7R ceramic decoupling capacitor on each VDD/AVDD pin plus a 0.1 uF HF bypass routed with minimal loop area; place them within 3 mm of each pin pair. The internal regulator (REGC, pin 83) requires a 1 uF decoupling cap on its own - omit only with caution. For battery-backed installations, the 0.66 uA standby current is achievable only when the application keeps the CPU in Halt mode with the 32 kHz crystal and RTC domain running; any peripheral left enabled (ADC, LCD, timers) will inflate standby current by orders of magnitude.
The LQFP-100 (14x14 mm) thermal envelope offers modest dissipation - the bottom exposed pad (EP, pin 100) must be soldered to a continuous ground pour that extends at least 4 mm^2 to dissipate internal regulator heat. Route all analog AFE traces on the top layer, guarded by AVSS on both sides; keep phase-correcting analog routing as short as practical and avoid crossing high-current or switched traces. The 32 kHz crystal traces should be short, ground-isolated, and free of crossing digital signals to preserve RTC accuracy for line-frequency measurement.
Estimated: at full 24 MHz operation in an inline meter reading continuously from the 24-bit AFE (sample rate 4 kHz), the part can dissipate ~30-40 mW; with VDD at 5 V and an uncontrolled ground plane, junction-to-ambient delta settles around +18C above ambient. In sealed meter enclosures at +55C ambient, this puts TJ around +73C - well inside the +85C commercial spec but leaves no headroom for higher VDD or fault-mode heating. Designers should compute worst-case power dissipation for the metrology firmware block and ensure a continuous EP ground pour is present to keep thermals in spec.
コンプライアンス情報
RoHS compliant per Renesas product page. Not AEC-Q100 qualified (consumer/commercial grade). Lead-free packaging. Halogen-free status not explicitly stated in the provided data - defaulting to 'unknown'.
