R5F10PLJKFB#H5 - 16-Bit 24MHz 256KB Flash MCU | Renesas
部品番号: R5F10PLJKFB#H5 ✓ 生産中R5F10PLJKFB#H5 概要
An automotive microcontroller is an embedded-processing semiconductor intended to control real-time system functions, evaluate sensor inputs, and manage actuator outputs. The RL78/F14 family occupies the upper level of the RL78 series and is organized around low standby and operating current, broad memory options, and integrated communication peripherals. This combination makes the family suitable for body electronics, motor systems, gateways, and electronic control units where low-energy operation and deterministic peripheral timing are important.
The R5F10PLJKFB#H5 combines a 24 MHz operating frequency with 256 KB flash memory and 64-pin integration. CAN and LIN support reduces the number of separate communication devices needed in automotive networks. Timer RD, comparators, and BLDC motor-control support broaden the device's usefulness for sensing, protection, and motor-drive functions, while the low-consumption architecture targets systems that spend substantial time in low-energy operating states.
The 64-LFQFP package provides a conventional leaded surface-mount interface compatible with automated assembly and inspection. In an automotive electronic control unit, the device can execute application firmware, process inputs from sensors, operate timers and comparators, and exchange data over CAN or LIN. Exact peripheral assignments, clock limits, electrical limits, and programming details should be selected from the pin-description tables and electrical characteristics in the manufacturer datasheet.
Typical applications include automotive body control modules, BLDC motor controllers, CAN and LIN gateway equipment, sensor-combination units, actuator controllers, and low-power electronic control units. Its automotive communication integration is particularly useful where multiple nodes must share diagnostic or control data while keeping board area and standby consumption under control.
A critical implementation step is to preserve clean separation between sensitive communication and power domains. Place decoupling capacitors at the supply pins, route CAN and LIN interfaces according to the manufacturer's reference layout, and validate oscillator, reset, and programming connections against the pin table. Firmware should also include appropriate startup checks and peripheral fault handling for automotive operating conditions.
This product page combines the manufacturer's device information, drop-in family alternatives, application guidance, pin and package references, and practical design notes. It helps engineers narrow replacements and plan PCB, firmware, and peripheral assignments while keeping the final schematic and production decisions grounded in the Renesas datasheet.
ドロップイン代替品: R5F10PLJKFB#H5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
R5F10PLJKFB#X5
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F10PLJKFB#V5
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F10PLJKFB
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F10PLJCKFB#55
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F10PLJCKFB#15
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F10PLJKFB#H5 最大定格&電気的特性
| Product Type | Automotive 16-bit microcontroller |
| Series | RL78/F14 |
| Core Architecture | 16-bit RL78 |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 256 KB |
| パッケージ | 64-LFQFP (10x10 mm) |
| ピン数 | 64 pins |
| 実装タイプ | Surface mount |
| Communication Interfaces | CAN and LIN |
| Motor Control Support | BLDC motor control |
| Analog and Timing Resources | Timer RD and comparator |
R5F10PLJKFB#H5 64-lfqfp (10x10 mm) ピン配置ガイド
R5F10PLJKFB#H5 (64-lfqfp (10x10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: R5F10PLJKFB#H5.
詳細は データシート をご参照ください。
主な用途
R5F10PLJKFB#H5 の用途: 6 件s: Automotive Body Control Module, BLDC Motor Controller, CAN and LIN Gateway, Automotive Sensor Fusion Unit, Actuator and Relay Control, Low-Power Electronic Control Unit.
Automotive Body Control Module
The R5F10PLJKFB#H5 fits an automotive body-control module that combines switch sensing, diagnostic logic, and network communication. Its 16-bit RL78 core operates at up to 24 MHz, while 256 KB flash provides room for application code, diagnostic routines, and configuration data. Integrated CAN and LIN modules allow the controller to communicate with vehicle nodes without requiring separate interface devices. Timer RD and comparator resources can support debouncing, pulse measurement, and simple protection functions. The principal design consideration is matching the exact suffix-specific automotive grade and temperature requirements while preserving clean power and communication routing around the 64-LFQFP device.
おすすめ
BLDC Motor Controller
The R5F10PLJKFB#H5 is suitable for a compact brushless DC motor controller requiring deterministic timing and automotive-network connectivity. Its RL78/F14 architecture operates at up to 24 MHz and includes timer RD, comparators, and BLDC motor-control support. Comparator channels can assist with rotor or current sensing, while timer resources support commutation and PWM sequencing. CAN and LIN connectivity permits diagnostic commands and operating-state reporting to a wider vehicle or industrial network. Firmware and circuit design should validate commutation timing, sensor filtering, fault handling, and thermal performance against the manufacturer application guidance.
おすすめ
CAN and LIN Gateway
The R5F10PLJKFB#H5 can serve as a protocol-conversion gateway between CAN and LIN network segments. Its integrated CAN and LIN modules reduce external interface overhead, while the 24 MHz 16-bit core supports message filtering, routing logic, diagnostics, and communication-time monitoring. The 256 KB flash capacity is suitable for storing protocol tables and gateway application code. In this design, the MCU must handle bus timing, fault counters, wake-up behavior, and diagnostic routing while ensuring that the communication and power domains meet automotive signal-integrity requirements.
おすすめ
Automotive Sensor Fusion Unit
The R5F10PLJKFB#H5 is appropriate for a low-consumption sensor-combination unit that evaluates inputs and reports results over a vehicle network. Its 24 MHz core provides deterministic execution for signal filtering, threshold logic, and state-machine control, while comparator and timer resources support direct sensing and time-based measurements. CAN and LIN interfaces enable centralized diagnostic access without adding separate transceivers to the MCU side of the design. The 64-LFQFP package keeps the digital controller compact, but analog signal conditioning and protection must be designed separately to preserve measurement accuracy and robustness.
おすすめ
Actuator and Relay Control
The R5F10PLJKFB#H5 can coordinate actuator, relay, and indicator-control outputs in a distributed automotive electronics module. Its timer RD supports repeatable timing sequences, comparators can assist with feedback or current detection, and the 24 MHz core can manage diagnostic state machines and communication tasks. Using CAN and LIN allows the controller to participate in centralized vehicle diagnostics while retaining local protection logic. The implementation should include output desaturation, flyback handling, watchdog behavior, and fail-safe defaults because the MCU package alone does not provide the power-stage isolation required by electromechanical actuators.
おすすめ
Low-Power Electronic Control Unit
The R5F10PLJKFB#H5 fits a low-power electronic control unit that combines local decision-making with CAN or LIN connectivity. The RL78/F14 family is positioned around low consumption current, while the 24 MHz core and 256 KB flash accommodate control algorithms, diagnostic services, and sleep-mode logic. Timer RD and comparator functions help minimize external sensing or timing circuitry. Low-power behavior must be validated at the complete system level because current consumption also depends on the selected suffix, clock configuration, enabled peripherals, pull networks, and power-management strategy. The 64-LFQFP package supports compact PCB layouts with controlled thermal and signal-integrity design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: R5F10PLJKFB#H5 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | R5F10PLJKFB#X5 | R5F10PLJKFB#V5 | R5F10PLJKFB | R5F10PLJCKFB#55 | R5F10PLJCKFB#15 |
|---|---|---|---|---|---|---|
| Package | 64-LFQFP (10x10 mm) | 64-LFQFP (10x10 mm) | 64-LFQFP (10x10 mm) | 64-LFQFP (10x10 mm) | 64-LFQFP (10x10 mm) | 64-LFQFP (10x10 mm) |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Core Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Communication Interfaces | CAN and LIN | CAN and LIN | CAN and LIN | CAN and LIN | CAN and LIN | CAN and LIN |
| Motor-Control Resources | Timer RD, comparator and BLDC motor-control support | Timer RD, comparator and BLDC motor-control support | Timer RD, comparator and BLDC motor-control support | Timer RD, comparator and BLDC motor-control support | Timer RD, comparator and BLDC motor-control support | Timer RD, comparator and BLDC motor-control support |
| Ordering Code | R5F10PLJKFB#H5 | R5F10PLJKFB#X5 | R5F10PLJKFB#V5 | R5F10PLJKFB | R5F10PLJCKFB#55 | R5F10PLJCKFB#15 |
主な差別化要因
- Integrated CAN and LIN reduce external interface overhead (vs R5F10PLJKFB#X5)
- Deterministic motor-control resources (vs R5F10PLJCKFB#15)
- Compact 64-pin integration with 256 KB flash (vs R5F10PLJCKFB#55)
設計ノート
Use the manufacturer’s 64-LFQFP land pattern and pin-1 orientation without relocating pins for board-space convenience. Place all required bypass capacitors adjacent to their supply and ground pins, provide a short return path for each capacitor, and avoid routing high-current actuator outputs beneath the device. Confirm exposed-pad requirements, thermal-via layout, and assembly clearances against the package drawing before releasing the PCB.
Keep CAN and LIN routing away from switching nodes, motor-drive outputs, and clock edges. Match trace geometry and termination to the selected transceiver and network specification, use continuous ground references under communication routes, and add appropriate protection where cables leave the enclosure. Validate bus rise times, ringing, common-mode behavior, and EMC margins on the assembled board rather than relying only on schematic continuity.
Plan the supply network for the device’s automotive transient environment, including reverse-battery, load-dump, and ESD conditions at the board interface. Separate external protection from the MCU supply filter so that surge current does not disturb local decoupling. Confirm the exact operating-voltage and automotive-grade limits for the selected ordering suffix before choosing regulator headroom, capacitors, and protection-device ratings.
Do not substitute an RL78/F14 ordering code solely because the base part number looks identical. Verify suffix-specific temperature grade, qualification, flash configuration, delivery format, and lifecycle status, then compare every pin in the package table. Programming tools and firmware may also depend on device identity, so confirm the exact MPN before cloning an existing production image or approving a drop-in replacement.
コンプライアンス情報
The manufacturer identifies the device as an automotive RL78/F14 microcontroller and describes functional-safety features, but the specific suffix certification and material-compliance declarations require confirmation from the product documentation.