S9S08LG32J0VLH - 40MHz 32KB Flash LCD MCU | NXP
部品番号: S9S08LG32J0VLH ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.8369 | $2.84 |
| 10 | $2.8369 | $28.37 |
| 100 | $2.8369 | $283.69 |
| 500 | $2.8369 | $1,418.45 |
| 1,000 | $2.8369 | $2,836.90 |
S9S08LG32J0VLH 概要
An LCD MCU is a microcontroller optimized for display applications rather than only general-purpose digital control. The S08 LG family is used where a product must drive segment LCDs while also acquiring inputs, running control logic, and communicating with external equipment. The S9S08LG32J0VLH supports up to 296 LCD segments according to the verified product data, making it relevant to meters, appliances, HVAC equipment, and instrument clusters.
Key verified features include a 40 MHz operating frequency, 32 KB Flash storage, 39 I/O ports, and operation from 2.7 V to 5.5 V. The automotive-qualified temperature range is -40°C to +105°C. These characteristics make the device suitable for embedded control systems requiring moderate processing speed, nonvolatile program storage, and direct LCD output without a separate display controller.
The S08 CPU provides an 8-bit processing platform with on-chip in-circuit emulation support. The LCD segment outputs reduce the need for external display-driver circuitry, while the 64-LQFP package exposes the MCU resources needed for sensors, switches, communication lines, and control outputs. Exact RAM, peripheral, electrical-limit, and timing values not present in the verified data are left unspecified rather than inferred.
Typical applications include electric meters, home appliances, HVAC systems, and entry-level instrument clusters. In these systems, the MCU can scan inputs and update LCD segments while executing embedded control functions. The 40 MHz clock provides processing margin for keypad scanning, measurement routines, state-machine control, and communication tasks, subject to the final firmware architecture and peripheral requirements.
Designers should verify the complete NXP datasheet and device characterization before release, especially LCD segment allocation, pin multiplexing, oscillator configuration, automotive qualification requirements, and supply sequencing. This page combines verified distributor and manufacturer information with application guidance and explicitly identifies parameters that require confirmation from the full datasheet.
ドロップイン代替品: S9S08LG32J0VLH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S9S08LG32J0VLH （同一形状・フットプリント） — 相違点: Package, CPU Core, Flash Memory, Operating Temperature, Product Type.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S08LG32CLH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08LG16CLH
✅ ドロップイン✓ 在庫あり
$2.87 / 個
データシートを見る →S9S08LG32J0CLK
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC9S08LG32CLH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08LL16CGT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1.1646 / 個
データシートを見る →MC9S08LL16CLF
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.71 / 個
データシートを見る →S9S08LG32J0VLH 最大定格＆電気的特性
| Product Type | 8-bit LCD microcontroller |
| CPU Core | S08 / 8-bit HCS08 |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 32 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| I/O Ports | 39 |
| LCD Segment Support | Up to 296 segments |
| 動作温度範囲 | -40°C to +105°C |
| パッケージ | 64-pin LQFP |
| Package Size | 10 mm x 10 mm |
| 実装タイプ | Surface mount |
| Automotive Qualification | Automotive qualified |
| On-Chip Emulator | In-circuit emulator support |
| Product Family | MC9S08LG |
| Device Type | S08 S08 microcontroller IC |
| Memory Organization | 32K x 8 Flash |
| Nominal Supply | 3.3 V / 5 V |
| LCSC Listed Price | From $2.8369 |
| LCSC Availability | In stock |
S9S08LG32J0VLH 10 mm x 10 mm ピン配置ガイド
S9S08LG32J0VLH (10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: S9S08LG32J0VLH.
詳細は データシート をご参照ください。
主な用途
S9S08LG32J0VLH の用途: 6 件s: Electric Meter Display, Home Appliance Control, HVAC System Interface, Entry-Level Instrument Cluster, Industrial Control Panel, Automotive Equipment Interface.
Electric Meter Display
The S9S08LG32J0VLH fits electric meters that combine a segment LCD with measurement inputs, calibration logic, and communication. Its verified 40 MHz S08 CPU provides margin for keypad scanning, measurement scheduling, state management, and data formatting, while the MC9S08LG family is specified to support up to 296 LCD segments. The 32 KB Flash stores firmware and display configuration. In a production design, confirm LCD bias, segment multiplexing, meter input routing, and pin assignments against the full NXP documentation before layout release.
おすすめ
Home Appliance Control
The S9S08LG32J0VLH is suitable for appliances that use an LCD for status, timing, or service information while also controlling motors, heaters, relays, or sensor inputs. Its verified 39 I/O ports provide a substantial control interface, and the 40 MHz CPU supports responsive keypad and state-machine handling without requiring a higher-complexity processor. The LCD segment capability can reduce display-driver overhead, although the exact segment count and multiplexing arrangement must be selected from the device configuration tables.
おすすめ
HVAC System Interface
The S9S08LG32J0VLH can serve as the display and local-control MCU in HVAC equipment, where temperature selection, fan state, fault codes, and operating modes are commonly shown on a segment LCD. The 2.7 V to 5.5 V supply range supports integration with industrial control electronics, while 32 KB Flash provides room for embedded control code. Firmware would scan inputs, debounce controls, update LCD segments, and supervise actuators. Validate electrical limits, LCD drive timing, and automotive or industrial temperature requirements in the final system design.
おすすめ
Entry-Level Instrument Cluster
The S9S08LG32J0VLH is relevant to entry-level instrument clusters because the MC9S08LG family is explicitly associated with LCD segment displays up to 296 segments. The 40 MHz 8-bit CPU can coordinate display updates, switch inputs, warning indicators, and basic vehicle or equipment logic. The verified automotive-qualified description and -40°C to +105°C operating range support harsh-environment evaluation, but qualification documentation and system-level validation remain necessary. Confirm display segment allocation and all peripheral multiplexing before treating it as a production replacement.
おすすめ
Industrial Control Panel
The S9S08LG32J0VLH can serve as the local controller for an industrial panel containing an LCD status display, pushbuttons, indicators, and digital sensor interfaces. Its verified 39 I/O ports and 40 MHz CPU provide resources for input scanning and deterministic embedded logic, while 32 KB Flash supports application firmware. The broad 2.7 V to 5.5 V supply range can simplify integration with mixed-voltage control circuitry when the I/O and LCD limits are respected. Verify grounding, LCD drive current, reset behavior, and production test access in the manufacturer documentation.
おすすめ
Automotive Equipment Interface
The S9S08LG32J0VLH is a candidate for automotive equipment interfaces because the verified data describes it as automotive qualified and specifies a -40°C to +105°C operating range. Its LCD segment-drive capability is useful for compact dashboards, meter displays, and status panels where an 8-bit MCU can manage both display and local control functions. The 40 MHz clock and 32 KB Flash support embedded application code, but automotive use requires review of the exact qualification record, EMC requirements, transient immunity, lifecycle commitments, and all device-specific electrical limits.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S9S08LG32J0VLH — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08LG32CLH | MC9S08LG16CLH | S9S08LG32J0CLK | MC9S08LL16CGT |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | Freescale Semiconductor / NXP legacy family | Freescale Semiconductor / NXP legacy family | NXP Semiconductors | Freescale Semiconductor / NXP legacy family |
| Package | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 48-LQFP |
主な差別化要因
- Verified 40 MHz 8-bit S08 processing performance （vs MC9S08LG16CLH)
- 32 KB Flash configuration （vs MC9S08LG16CLH)
- LCD-focused family positioning （vs MC9S08LL16CGT)
設計ノート
Begin the PCB layout from the official 64-LQFP pinout and LCD multiplexing tables rather than from the family description alone. Place the MCU, decoupling capacitors, reset network, and oscillator components in the same power-and-ground domain, then route LCD segment outputs directly to the display connector. Keep long traces away from sensitive programming and clock nets. The verified data confirms the package and LCD function but does not provide the complete pin assignment, so the layout must be checked against the current NXP datasheet.
Use the verified 2.7 V to 5.5 V operating range as the initial design boundary, but select the actual supply level from the LCD bias and I/O requirements. Place the required bypass capacitors close to the supply pins and provide a clean return path for display and digital currents. The supplied data does not specify current consumption, regulator sequencing, or maximum pin loading, so those values must be obtained from the manufacturer documentation before power-supply sizing.
Do not assume that any related MC9S08LG or S9S08LL part is a true replacement merely because it is described as an LCD or S08-family MCU. Verify pin-by-pin compatibility, package dimensions, Flash capacity, LCD segment allocation, voltage limits, reset behavior, oscillator connections, and programming interface first. The alternative entries in this record are comparison candidates because the supplied cross-reference data does not provide a complete manufacturer-verified drop-in matrix.
コンプライアンス情報
The verified product and distributor snippets describe the device as automotive qualified. The supplied data does not independently provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.
