Skyworks Solutions

SI3203-B-FM - 2-Channel 3.3V SLIC | Skyworks Solutions

部品番号: SI3203-B-FM ✗ 生産終了
3.3 V Vdss 45 mA Id 40-pin QFN with exposed pad Package
MOQ: 1 |

SI3203-B-FM 概要

Skyworks Solutions SI3203-B-FM is a two-channel subscriber line interface circuit, or SLIC, designed for telecom line-card interfaces. The device operates from a 3.3 V supply, provides 60 dB of gain, and uses a 45 mA line interface. It is packaged in a 40-pin QFN with an exposed pad for compact, surface-mount PCB layouts.

A subscriber line interface circuit is an interface IC that connects a telephone line to a digital voice-processing system. Within the telecom interface hierarchy, a SLIC performs functions associated with the analog line side of the voice channel, including line conditioning and signal handling. Its role sits between external line-network hardware and higher-level voice, codec, or packet-processing electronics.

The SI3203-B-FM combines two SLIC channels in one package to reduce board area in multi-channel line-card equipment. Its 3.3 V operating supply supports low-voltage telecom interface designs, while 60 dB gain provides a defined analog signal-gain target for each channel. The stated 45 mA operating current should be considered during power-budget and thermal planning, particularly when several line channels are populated on the same board.

The 40-pin QFN package provides a high pin count for the line-interface functions, digital control connections, power rails, and ground returns. The exposed thermal pad provides a direct path for heat transfer into the PCB copper, allowing the package to dissipate power without a separate heatsink when the board is designed with adequate thermal area. Precise pin assignments and interface functions must be taken from the manufacturer pin-description table during schematic capture.

Typical uses include two-channel voice line cards, subscriber-line access equipment, voice-over-IP terminal stages, digital loopback interfaces, and telecom systems that require more than one analog line channel. The device is especially relevant to compact designs where two channels per package simplify routing and conserve board area. Adjacent codec, line-interface, protection, and network components must be selected from the same system-level voice-interface design.

When placing the SI3203-B-FM, provide a continuous low-impedance ground plane and connect the exposed pad according to the manufacturer land-pattern and thermal-layout guidance. Decoupling should follow the pin-specific power requirements in the datasheet. Because this is a high-pin-count mixed-signal telecom interface, keep sensitive line-side routing away from switching nodes and route ground returns directly to the appropriate quiet-ground and power-return structures.

This product page combines the known device characteristics with a practical engineering view of the SI3203-B-FM. It also identifies package-compatible alternatives, clarifies sourcing and datasheet entry points, and organizes application, comparison, and layout guidance for engineers evaluating a two-channel SLIC design.

ドロップイン代替品: SI3203-B-FM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: SI3203-B-FM (同一形状・フットプリント) — 相違点: Package, Product Series.

Skyworks Solutions
Package: 40-VFQFN, 6 x 6 mm
Product Series: ProSLIC
比較対象 SI3203-B-FM →

SI3203-B-GM

✅ ドロップイン
Skyworks Solutions
📦 40-pin QFN
Subscriber Line Interface Concept (SLIC) and codec interface IC · 2 channels · 3.3 V · 45 mA · 100 V · 60 dB · 40-VFQFN, 6 x 6 mm · QFN with exposed pad

価格はお問い合わせください

データシートを見る →

SI3203-B-FM 仕様

Product Type Subscriber Line Interface Circuit (SLIC)
Channel Count 2 channels
電源電圧 3.3 V
Gain 60 dB
Operating Current 45 mA
パッケージ 40-pin QFN with exposed pad
実装タイプ Surface Mount
Interface Category Telecom Interface IC
Product Series SI3203

SI3203-B-FM 40-pin qfn with exposed pad ピン配置ガイド

SI3203-B-FM (40-pin qfn with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SI3203-B-FM の 40-pin qfn with exposed pad パッケージピン配置図

詳細なピン配置データはありません: SI3203-B-FM.

詳細は データシート をご参照ください。

主な用途

SI3203-B-FM の用途: 6 件s: Two-Channel Voice Line Card, Voice-over-IP Terminal Stage, Digital Loopback Voice Interface, Subscriber-Line Access Equipment, Telecommunications Line Protection, Industrial Voice Monitoring System.

🌐

Two-Channel Voice Line Card

The SI3203-B-FM fits a two-channel voice line card because one package contains two SLIC channels, reducing the number of line-interface devices and routing junctions on the board. Its 3.3 V supply and 60 dB gain provide the principal operating targets for the analog line side, while the 45 mA operating current supports a defined power-budget starting point. Place the device beside the line protection and codec circuitry, then route each line channel with short, controlled-impedance paths. The 40-pin QFN exposed pad should connect to the ground structure and thermal copper according to the manufacturer land pattern, because thermal performance and analog return integrity are linked in this dense line-card layout.

📱

Voice-over-IP Terminal Stage

The SI3203-B-FM can provide the line-facing interface stage of a voice-over-IP terminal when the design uses two analog subscriber-line channels. Its two-channel integration limits component count compared with two separate single-channel devices, and its 60 dB gain is the key signal parameter to reconcile with codec and line-network requirements. The 3.3 V rail and 45 mA current must be included in the terminal power budget. Place the SLIC close to the line protection components, isolate codec traces from line-side routes, and use a quiet analog ground region. Validate the gain budget and clock or digital-interface timing against the complete voice path before production.

🧩

Digital Loopback Voice Interface

The SI3203-B-FM is appropriate for digital loopback test and line-interface development because its two SLIC channels can be exercised together within one package. The manufacturer documentation identifies 3.3 V operation, 60 dB gain, and 45 mA current as the principal design values for evaluating the device. In a loopback fixture, keep line-side stimulus and digital-side test routing separated to avoid masking signal-quality problems with unintended coupling. Use controlled input impedance and defined test levels, and verify channel-to-channel behavior across process, temperature, and supply variations. The exposed pad should be connected to the board ground and thermal plane to stabilize junction temperature during repeated channel testing.

🏭

Subscriber-Line Access Equipment

The SI3203-B-FM can support compact subscriber-line access equipment requiring two analog voice channels per interface package. Its 40-pin QFN format preserves access to multiple SLIC, power, ground, and digital control connections while reducing board area compared with discrete channel implementations. The 3.3 V operating supply suits low-voltage equipment, and the 60 dB gain must be included in the line and codec signal-budget calculation. The 45 mA operating current contributes directly to board-level thermal and supply sizing. Route sensitive analog nets away from switching converters and Ethernet magnetics, and follow the manufacturer exposed-pad and decoupling recommendations to maintain predictable behavior.

🛡️

Telecommunications Line Protection

The SI3203-B-FM can be used immediately downstream of line-protection networks in telecom interface boards that distribute two subscriber-line channels. The IC does not replace the external surge and overvoltage protection components, but its 40-pin QFN arrangement allows line, control, and supply functions to be consolidated near the protected interface section. Its 60 dB gain and 45 mA current are important when balancing the line signal path and supply budget. Keep protection-current paths and switching-node copper away from the SLIC ground reference, use short return connections, and verify the production layout against the manufacturer thermal land pattern. Compliance and safety requirements for the complete protection circuit must be assessed separately from the interface IC.

🏥

Industrial Voice Monitoring System

The SI3203-B-FM suits an industrial voice-monitoring terminal that acquires two telephone-line channels and passes them into downstream digital processing. Its two-channel package reduces analog front-end component count, while the 3.3 V supply can simplify integration with low-voltage control electronics. The specified 60 dB gain and 45 mA current provide the main values for front-end signal and power planning. Because industrial installations may combine switching regulators, displays, and long external cables, keep the line-side traces away from switching nodes and provide a dedicated quiet-ground return. Validate conducted noise, temperature behavior, and grounding at the system level rather than treating the 60 dB figure as the only indication of signal integrity.

What is the SI3203-B-FM?
The SI3203-B-FM is a two-channel subscriber line interface circuit, or SLIC, operating from a 3.3 V supply. It provides a stated gain of 60 dB and operates at 45 mA in a 40-pin QFN package with an exposed pad. According to the manufacturer documentation for the SI3203-B-FM, its primary role is interfacing telecom voice lines with digital voice-processing equipment.
What are the key specifications of SI3203-B-FM that engineers should know?
The SI3203-B-FM integrates two SLIC channels into a 3.3 V, 40-pin QFN package. Its principal documented characteristics include 60 dB gain and 45 mA operating current. According to the manufacturer datasheet, the exposed-pad QFN construction supports compact surface-mount layouts and PCB-based heat transfer, while the dual-channel arrangement can reduce the number of line-interface packages required on a voice card.
Where can I download the SI3203-B-FM datasheet PDF?
The SI3203-B-FM datasheet PDF can be reached through the datasheet listing linked on this page. The manufacturer datasheet is the controlling document for pin assignments, absolute-maximum ratings, recommended operating conditions, interface characteristics, and the exposed-pad land pattern. Use that document to verify every PCB net and power condition before releasing a layout.
Where can I find the SI3203-B-FM pinout?
The SI3203-B-FM pinout is defined by the 40-pin QFN pin-description table in the manufacturer datasheet. Its exposed pad is a thermal and electrical connection rather than a numbered signal pin, so it must be handled according to the package drawing and recommended land pattern. Use the pin-description table to assign line, control, supply, and ground nets instead of inferring functions from the exposed pad.
Is the SI3203-B-FM suitable for a two-channel voice line card?
The SI3203-B-FM is suitable for a two-channel voice line card when the system requirements match its 3.3 V supply, 60 dB gain, 45 mA current, and 40-pin QFN interface. Its two integrated SLIC channels directly match a two-channel line-card section. The manufacturer datasheet should still be checked against line impedance, codec interface, protection, and system timing requirements before design release.
What can replace the SI3203-B-FM?
The SI3203-B-GM is the closest identified same-family option because it uses the same 40-pin QFN format and retains the two-channel SLIC function. Compatibility must be confirmed at the pin and electrical level before it is treated as a drop-in replacement. For currently manufactured telecom interface designs, request a quote on this page for the SI3203-B-FM while the engineering team validates lifecycle and sourcing options.
Is the SI3203-B-FM the same as the SI3203-B-FMR?
The SI3203-B-FM and SI3203-B-FMR represent the same base device family, but the R suffix denotes a different orderable packaging or reel configuration rather than a distinct electrical substitute. Engineers should therefore treat the FMR listing as a packaging option for procurement, not as a separate functional alternative. Confirm the manufacturer ordering information and reel orientation before substituting the orderable suffix.
SI3203-B-FM vs SI3203-B-GM - which is better for a legacy voice card?
The SI3203-B-FM is preferable when an existing legacy voice-card design has already been qualified around that exact orderable device and its documented behavior. The SI3203-B-GM offers the closest identified package-family path because it is also associated with the SI3203 series and a 40-pin QFN, but its detailed electrical and lifecycle differences require verification. A footprint match alone does not prove that a timing, gain, or control parameter is unchanged.
When should I choose the SI3203-B-FM instead of the SI3203-B-GM?
Choose the SI3203-B-FM when maintaining an existing design requires the exact documented electrical behavior and orderable identity of that part. Consider the SI3203-B-GM only after comparing its pin functions, operating limits, interface timing, and device status against the SI3203-B-FM datasheet. This approach minimizes the risk of introducing signal-timing or production-readiness differences into a proven telecom design.
Where can I buy the SI3203-B-FM online?
The Request a Quote form on this page is the direct route for SI3203-B-FM sourcing, including current availability, minimum order quantity, and lead-time confirmation. Because this is a mature interface product, procurement should establish lifecycle status and authorized-channel coverage before the design reaches production. Request a firm quotation against the exact SI3203-B-FM orderable MPN.
What is the price of the SI3203-B-FM?
Use the Request a Quote form on this page for the current SI3203-B-FM commercial terms. The quote can reflect the exact orderable MPN, required quantity, delivery schedule, and traceability needs rather than a potentially stale catalog figure. No fixed price is stated here because transaction terms for mature telecom-interface components can vary with quantity and supply status.
What is the lead time for the SI3203-B-FM?
The current lead time for the SI3203-B-FM should be confirmed through the Request a Quote form on this page. Lead time can depend on lot availability, order quantity, inspection requirements, and whether the shipment is new stock or factory-sourced. Provide the production schedule and required quantity with the request so the supplier can confirm a delivery commitment.
Is the SI3203-B-FM currently in stock?
Current SI3203-B-FM stock status should be confirmed through the Request a Quote form on this page. The manufacturer and distribution results describe ordering and stock-checking functions but do not provide a stable, timestamped quantity for this exact MPN. Do not base a production commitment on an unverified listing; request lot, date-code, and traceability information with the quotation.
Does the SI3203-B-FM require an external heatsink?
The SI3203-B-FM uses a 40-pin QFN with an exposed pad, and the first thermal-design step is to implement the manufacturer-recommended PCB land pattern with substantial connected copper. Whether an external heatsink is needed depends on actual dissipation, ambient temperature, board construction, and the package thermal rating. Calculate the worst-case condition with the production PCB rather than assuming that the exposed pad alone guarantees safe operation.
Is the SI3203-B-FM RoHS compliant?
The RoHS status of the SI3203-B-FM is not explicitly stated in the accessible product listing, so its compliance should be confirmed for the exact orderable part before a regulated shipment is released. Request the current manufacturer declaration, material or substance documentation, and applicable lead-free information with the quotation. Treat compliance as product-specific rather than inheriting it from another member of the SI3203 family.

エンジニアリング参考データ: SI3203-B-FM — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SI3203-B-FM when an existing telecom or voice-over-IP design specifies the exact orderable device and its established pin, timing, and signal behavior must be preserved. Its two integrated SLIC channels, 3.3 V supply, 60 dB gain, and 45 mA current make it suitable for compact two-channel line cards, while the exposed-pad QFN requires careful PCB grounding and thermal implementation. Consider the SI3203-B-GM only when procurement needs a same-series option and engineering confirms that every pin function and critical electrical parameter is interchangeable. Do not select the SI3203-B-FMR as a different functional alternative; it is an orderable packaging variant of the same device family. For new active designs, compare current telecom interface ICs against required channel count, codec interface, voltage, thermal limits, lifecycle status, and verified package compatibility.

代替品との比較

パラメータ この製品 SI3203-B-GM
Brand Skyworks Solutions Skyworks Solutions
Package 40-pin QFN with exposed pad 40-pin QFN
Product Type Subscriber Line Interface Circuit Subscriber Line Interface Circuit
Channel Count 2 channels 2 channels
Series SI3203 SI3203
Lifecycle Status Obsolete Obsolete

主な差別化要因

  • Two SLIC channels integrated in one package (vs SI3203-B-GM)
  • Defined low-voltage operating point (vs SI3203-B-GM)
  • Exposed-pad thermal path (vs SI3203-B-GM)

設計ノート

Use the manufacturer QFN land pattern with a continuous exposed-pad connection to the PCB ground plane. Avoid placing high-current returns or switching-component grounds beneath the package unless the thermal and analog-return design explicitly supports that arrangement. Keep the 40 peripheral pads and the exposed pad electrically distinct only when required by the datasheet, and inspect the finished assembly for voids or insufficient solder coverage because thermal performance depends on reliable attachment.

Separate the line-side and digital-side routes as much as the 40-pin package permits. Route each analog line channel away from switching nodes, inductors, and high-di/dt return paths, and provide a low-impedance return beneath the associated circuitry. Do not assume that the 60 dB nominal gain guarantees acceptable system noise immunity; evaluate the complete line interface under worst-case supply and switching conditions.

Estimated: using the stated 3.3 V supply and 45 mA operating current, the nominal supply power is 0.1485 W. This is an arithmetic estimate using 3.3 V multiplied by 45 mA, not a datasheet maximum-power rating. Confirm quiescent and load-current behavior, rail tolerance, startup sequencing, and capacitor requirements from the manufacturer documentation before sizing the supply and local decoupling.

Do not treat the SI3203-B-FMR orderable suffix as a separate functional upgrade; suffix changes commonly identify packaging or reel orientation. Likewise, a shared QFN footprint does not by itself establish drop-in electrical compatibility. Before replacing SI3203-B-FM with SI3203-B-GM, compare every pin function, absolute-maximum rating, interface timing parameter, and system-control sequence in the manufacturer documentation.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The accessible product information does not state exact-product RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm compliance documentation for the exact SI3203-B-FM orderable part before shipment.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SI3203-B-FM datasheet SI3203-B-FM specifications SI3203-B-FM pinout SI3203-B-FM datasheet pdf SI3203-B-FM equivalent SI3203-B-FM replacement SI3203-B-FM vs SI3203-B-GM SI3203-B-FM QFN-40 footprint SI3203-B-FM price SI3203-B-FM stock Skyworks Solutions SI3203-B-FM SI3203-B-FM two channel SLIC

関連部品&用語

Skyworks Solutions Silicon Labs SI3203-B-FM SI3203-B-FMR SI3203-B-GM SI3203 series subscriber line interface circuit SLIC telecom interface IC line-card interface voice-over-IP mixed-signal interface QFN-40 QFN package family surface mount SMD 3.3 V supply 60 dB gain 45 mA operating current two-channel integration exposed pad RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示