STA529Q - 2 x 100mW Class-D Stereo Amplifier | STMicroelectronics
部品番号: STA529Q ✗ 生産終了STA529Q 概要
A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to deliver audio energy through a class-D output stage. The STA529Q combines that output stage with digital audio processing, creating a multichannel device within the amplifier IC category. Its FFX architecture supports analog or digital input configurations while providing 96 dB dynamic range.
The STA529Q delivers two 100 mW output channels and supports I2C, I2S, mute, volume control, and depop functions. Its digital and analog power supplies are specified at 1.95 V, while its overall supply-voltage range is 1.8 V to 3.3 V. These features make it suitable for compact audio systems requiring local digital signal processing without a separate audio processor.
Its 52-pin VFQFPN surface-mount package integrates the stereo Class-D output drivers and multichannel digital audio functions. The listed industrial temperature grade supports use in commercial and industrial equipment, although the obsolete lifecycle status means new production qualification and long-term availability should be confirmed before committing a design.
Typical uses include portable speakers, compact consumer audio equipment, digital audio source modules, and embedded multimedia systems. Digital sources can connect through I2S, while a host controller can configure volume and mute behavior through I2C. The 8 kHz-to-192 kHz sample-rate range supports voice, general-purpose audio, and high-resolution audio playback.
Designers should preserve the 1.8 V to 3.3 V operating range and distinguish the 1.95 V digital and analog supply specifications from that broader range. Because no verified pin mapping or public pricing was included in the supplied data, board-level integration must be checked against the manufacturer datasheet before layout, and any obsolete-part sourcing plan should include an explicit lifecycle review.
This page consolidates the verified distributor listing, package and electrical identifiers, application guidance, lifecycle information, and engineering cautions for the STA529Q. It also identifies where pin-level, pricing, and replacement information requires separate confirmation rather than presenting unverified assumptions as component facts.
ドロップイン代替品: STA529Q — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSTA529Q 最大定格＆電気的特性
| Product Type | 2-channel Class-D stereo audio amplifier and digital audio processor |
| Output Power | 2 x 100 mW |
| Supply Voltage Range | 1.8 V to 3.3 V |
| Digital Power Supply | 1.95 V |
| Analog Power Supply | 1.95 V |
| Dynamic Range | 96 dB |
| Supported Sample Rates | 8 kHz to 192 kHz |
| Input Interface | Analog or digital input |
| Digital Audio Interface | I2S |
| Control Interface | I2C |
| Audio Features | Depop, mute, and volume control |
| Output Stage | FFX Class-D driver |
| パッケージ | 52-VFQFPN, 8 x 8 mm |
| 実装タイプ | Surface mount |
| Number of Terminals | 52 |
| Temperature Grade | Industrial |
| ライフサイクル状態 | Obsolete |
| Output Load | 16 ohm |
| 出力構成 | Stereo, 2 channels |
STA529Q 52-vfqfpn, 8 x 8 mm ピン配置ガイド
STA529Q (52-vfqfpn, 8 x 8 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: STA529Q.
詳細は データシート をご参照ください。
主な用途
STA529Q の用途: 6 件s: Compact Digital Speaker Module, Portable Consumer Audio Product, Voice Assistant and IoT Speaker, Digital Audio Source Card, Industrial Audio Control Panel, Multimedia Embedded System.
Compact Digital Speaker Module
The STA529Q fits a compact speaker module that accepts I2S audio and needs local two-channel amplification without a separate digital audio processor. Its two 100 mW Class-D outputs and 8 kHz-to-192 kHz sample-rate support cover voice playback, multimedia playback, and small stereo speakers, while the 52-VFQFPN 8 x 8 mm package limits board area. The primary design trade-off is its obsolete status, so the module should use controlled inventory and require lifecycle approval. Pin assignment, output-filter values, and power sequencing must be confirmed from the manufacturer datasheet.
おすすめ
Portable Consumer Audio Product
The STA529Q is applicable to battery-powered portable products requiring two low-power audio outputs and digital volume management. Its 1.8 V to 3.3 V supply range supports compact integrated systems, while I2C control allows a host processor to adjust volume or engage mute. The 2 x 100 mW rating is intended for small speakers and should not be extrapolated to higher-impedance or larger drivers. Because the verified lifecycle status is obsolete, a new portable platform should compare currently supported amplifiers before freezing the bill of materials.
おすすめ
Voice Assistant and IoT Speaker
The STA529Q can serve as the output and processing section of a voice-assistant or IoT speaker when the system receives digital audio and requires short local processing functions. Its I2S input, I2C control, mute, depop, volume control, and 96 dB dynamic range support a clean signal path from a host or network-audio processor to two miniature speakers. Its low 2 x 100 mW output level fits near-field transducers rather than room-filling speakers. Engineers should validate acoustic performance, thermal behavior, and the obsolete supply plan before deployment.
おすすめ
Digital Audio Source Card
The STA529Q is suitable for a digital audio source card that accepts I2S streams and drives local stereo monitoring outputs. Supporting sample rates from 8 kHz to 192 kHz allow the same platform to serve telephony, compressed-audio playback, and high-resolution content, provided the source format and clocking are accepted. The integrated 2.0 processor, volume control, mute, and depop functions reduce external control-component count. Its 52-VFQFPN package still requires careful escape routing and a verified 52-pin land pattern.
おすすめ
Industrial Audio Control Panel
The STA529Q can support a compact industrial audio-control panel that plays confirmation tones, status messages, or two-channel announcements through small speakers. The listed industrial temperature grade makes it relevant to equipment operating outside consumer-only environments, although the exact operating-temperature limits require datasheet verification. I2C configuration supports controlled mute and volume behavior, while digital input can reduce analog routing. Because the part is obsolete, industrial equipment programs should document traceability, long-term availability, and an approved redesign path.
おすすめ
Multimedia Embedded System
The STA529Q fits an embedded multimedia subsystem where two low-power speakers reproduce system notification, media, and interface audio. Its integrated digital processor can reduce the need for a separate audio-control IC, and the 1.8 V to 3.3 V operating range aligns with low-voltage embedded rails. The 2 x 100 mW output rating limits use to compact speaker loads, so impedance and filter compatibility must be checked carefully. Lifecycle approval is especially important for industrial or medical-adjacent systems that expect long maintenance lives.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STA529Q — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | STMicroelectronics |
| Package | 52-VFQFPN, 8 x 8 mm |
| Output Power | 2 x 100 mW |
| Supply Voltage Range | 1.8 V to 3.3 V |
| Digital Power Supply | 1.95 V |
| Analog Power Supply | 1.95 V |
| Dynamic Range | 96 dB |
| Supported Sample Rates | 8 kHz to 192 kHz |
| Input Configuration | Analog or digital input |
| Control Interface | I2C |
| Digital Audio Interface | I2S |
| Lifecycle Status | Obsolete |
主な差別化要因
- Integrated multichannel audio processing （vs STA5620A)
- Broad digital sample-rate support （vs STA309A)
- Digital and analog input flexibility （vs STA5630)
設計ノート
The verified operating range is 1.8 V to 3.3 V, with 1.95 V identified for both digital and analog power supplies. Do not treat the nominal 1.95 V values as a separate permissible range. Confirm which rails require 1.95 V, how analog and digital supplies may be sequenced, and the bypass network in the manufacturer datasheet. The STA529Q is obsolete, so any power-supply redesign must be validated against the original reference circuit before schematic changes are approved.
The 52-VFQFPN package has no exact pinout in the supplied evidence, so PCB work must begin with the manufacturer datasheet rather than a generic 52-pin QFN drawing. Confirm pin-1 location, exposed-pad treatment, ground connections, output-driver connections, I2S routing, I2C routing, and decoupling positions. Use the datasheet reference layout and keep sensitive audio paths away from switching-node and supply-return currents wherever the 8 x 8 mm footprint permits.
Do not treat general amplifier listings as proof that the STA529Q, STA5620A, STA5630, STA309A, STA308A, or STA304A share a pin-to-pin footprint. The supplied cross-reference results do not verify package dimensions, pin names, output power, voltage limits, or I2C behavior. Likewise, the obsolete designation requires a documented sourcing and obsolescence plan. Before schematic capture, obtain the complete datasheet and approve both electrical compatibility and long-term procurement.
コンプライアンス情報
The supplied results identify an industrial temperature grade but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.
