STB-TCI - Isolated Analog Signal Conditioning Panel | Analog Devices
部品番号: STB-TCI ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
STB-TCI 概要
ドロップイン代替品: STB-TCI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSTB-TCI 仕様
| Product Type | Analog signal-conditioning panel |
| Signal Conditioning Function | High electrical isolation |
| Product Category | Integrated Circuits > Interface ICs |
| Application Domain | Sensor and detector interfaces |
| ライフサイクル状態 | Obsolete |
| Manufacturer | Analog Devices |
| Part Number | STB-TCI |
STB-TCI standard ピン配置ガイド
STB-TCI (standard パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: STB-TCI.
詳細は データシート をご参照ください。
主な用途
STB-TCI の用途: 6 件s: Isolated Sensor Signal Conditioning, Low-Level Input Conditioning, High-Isolation Measurement Systems, Industrial Sensor Interface Panels, Legacy Measurement Equipment Maintenance, Analog Signal-Path Reproduction.
Isolated Sensor Signal Conditioning
The Analog Devices STB-TCI is documented as an analog signal-conditioning panel for applications requiring high electrical isolation. That makes isolated sensor conditioning the closest functional use case supported by the verified manufacturer excerpt, particularly systems where low-level sensor signals must be separated from the measurement environment. The source does not specify input range, gain, accuracy, bandwidth, channel count, or isolation withstand voltage, so engineers must retrieve those values from the original system documentation before using the panel in a new circuit. Existing equipment designs should preserve the original wiring and calibration arrangement rather than assuming a generic interface IC can replace it.
おすすめ
Low-Level Input Conditioning
The manufacturer data sheet states that STB-TCI may be used instead of 5B Series modules when an application has many low-level inputs and does not require single-channel modularity. This supports use in multi-input analog measurement systems where signal conditioning must be consolidated into a panel arrangement. The available excerpt does not identify the number of inputs, sensor types, or conditioning functions, so it cannot establish whether STB-TCI supports a particular thermocouple, bridge, or low-voltage source. Any use should begin with a review of the original panel schematic, input scaling, isolation boundaries, and calibration procedure.
おすすめ
High-Isolation Measurement Systems
The STB-TCI is explicitly associated with signal conditioning for applications requiring high electrical isolation. This supports legacy or specialized measurement systems in which the sensor interface must reduce electrical coupling between a field-side input and the rest of the equipment. The verified material does not state an isolation voltage, creepage distance, withstand test, leakage current, or working voltage. Consequently, isolation suitability must be established from the original Analog Devices documentation and the complete system safety requirements. Do not substitute a low-isolation interface circuit simply because it can process the same analog signal level.
おすすめ
Industrial Sensor Interface Panels
Because distributor and manufacturer records classify STB-TCI under sensor and detector interfaces, the panel may be relevant to legacy industrial equipment that groups multiple low-level inputs into an isolated analog interface. The documented evidence does not confirm industrial qualification, operating temperature, enclosure rating, connector style, or environmental ruggedness. Therefore, the product should be treated as a legacy interface element whose suitability depends on the original installed system rather than on a generic industrial category. A replacement effort should map every input, output, isolation barrier, calibration adjustment, and external connector before selecting any modern interface hardware.
おすすめ
Legacy Measurement Equipment Maintenance
The obsolete lifecycle status makes STB-TCI most relevant to maintenance, repair, and continuity of older measurement equipment. A specialist inventory supplier may be able to locate a small quantity, but the verified data does not establish condition, date code, calibration status, or long-term supply. Maintenance teams should photograph and document the installed panel, verify connector pinouts, and preserve the original isolation schematic before ordering replacement inventory. A matching product name alone is insufficient evidence of compatibility when the package, pinout, signal parameters, and operating conditions are unspecified in the available records.
おすすめ
Analog Signal-Path Reproduction
The STB-TCI can be studied as part of an analog signal-path design because the manufacturer describes it as a signal-conditioning panel rather than a simple connector or passive component. Reproduction requires the original signal-level mapping and isolation boundaries, neither of which is fully available in the verified excerpts. Engineers should use the obsolete data sheet as a historical reference, then compare the original system against a currently supported conditioner with documented input range, transfer function, bandwidth, noise, accuracy, and calibration behavior. The record does not support claiming that any listed modern component is a direct replacement.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STB-TCI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Analog Devices |
| Lifecycle Status | Obsolete |
| Product Type | Analog signal-conditioning panel |
| Isolation Function | High electrical isolation |
主な差別化要因
- Verified isolated signal-conditioning role （vs Generic analog interface components)
- Obsolete-product sourcing position （vs Currently supported replacement candidates)
- Panel-level system integration （vs Discrete package alternatives)
設計ノート
Do not treat a marketplace listing or a related 5B product name as proof that an alternative is drop-in compatible with STB-TCI. The verified sources do not specify the package, pinout, connectors, channel count, isolation rating, or signal-conditioning parameters. Before ordering a replacement, create a requirements table covering every input, output, isolation barrier, calibration range, connector, and environmental condition.
Use the original panel schematic and signal-path documentation to preserve the STB-TCI's analog conditioning behavior. Pay particular attention to low-level input amplitude, grounding, isolation boundaries, shielding, calibration, and connector pin assignments. The available evidence confirms isolated signal conditioning but does not provide bandwidth, noise, accuracy, or isolation-voltage figures, so these values must be verified before estimating signal integrity or troubleshooting a modern replacement circuit.
Do not infer supply requirements from the product name or from the related 5B02 documentation excerpt. The verified data does not state the STB-TCI supply voltage, current, startup behavior, or grounding arrangement. Service engineers should measure and document the installed system's supply requirements and compare them with the complete original manual or schematic before applying power to any substitute panel or interface card.
コンプライアンス情報
The verified excerpts do not provide compliance declarations for STB-TCI. Because this is an obsolete panel product, compliance status should be confirmed from the original manufacturer documentation and supplier records rather than assumed.
