STDP2600ADT - HDMI 1.4 to DisplayPort Converter | Kinetic
部品番号: STDP2600ADT ✓ 生産中STDP2600ADT 概要
An HDMI-to-DisplayPort converter is a video interface IC that receives digital audiovisual data through an HDMI transmitter and translates that stream into a DisplayPort-compatible output. The STDP2600ADT belongs to the broader video converter and interface IC hierarchy, where protocol translation must maintain compatible video timing, control signaling, and sink-management behavior. Its advanced converter architecture is intended for embedded-display applications rather than consumer adapter cables.
The verified product information identifies HDMI 1.4 compatibility, serial I2C and SPI control, and an 81-BGA package. The I2C-to-AUX function is particularly important because it provides a control path for EDID access and MCCS transfer between the upstream HDMI source and downstream DisplayPort device. The datasheet also states that the ASSR alternative scrambler seed reset option is supported for embedded applications. Detailed electrical limits, display resolutions, lane rates, and environmental ratings were not present in the supplied search records and therefore require confirmation from the complete manufacturer datasheet.
Typical implementation is in an embedded DisplayPort panel, docking system, industrial display controller, or video bridge where an HDMI source must drive a DisplayPort sink. System designers should account for the IC's BGA assembly requirements, route high-speed HDMI and DisplayPort signals with controlled impedance, and validate source, sink, EDID, and MCCS behavior as a complete interface chain. The converter must also be configured and tested for the exact display timing and authentication requirements of the target product.
A key design consideration is that protocol conversion does not eliminate all source-to-display compatibility constraints. Input resolution, refresh rate, color format, HDCP or ASSR requirements, cable length, and DisplayPort link training must be validated together. The manufacturer datasheet is the controlling source for electrical characteristics, pin assignments, reference-design requirements, and timing limitations.
This product summary consolidates the verified distributor identity, package information, interface functions, and datasheet features while explicitly separating missing technical data from confirmed specifications. It also records the absence of independently verified pin-to-pin replacement parts, preventing functional or cross-package substitutes from being presented as drop-in alternatives.
ドロップイン代替品: STDP2600ADT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSTDP2600ADT 仕様
| Device Type | Advanced HDMI-to-DisplayPort converter |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interfaces | I2C, SPI, and serial |
| パッケージ | 81-BGA (8 mm x 8 mm) |
| 実装タイプ | Surface mount |
| EDID Access | Supported through the I2C-to-AUX translator |
| MCCS Support | Supported through the I2C-to-AUX translator |
| Embedded Authentication Option | ASSR (Alternative Scrambler Seed Reset) |
| Manufacturer | Kinetic Technologies |
STDP2600ADT 81-bga (8 mm x 8 mm) ピン配置ガイド
STDP2600ADT (81-bga (8 mm x 8 mm) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: STDP2600ADT.
詳細は データシート をご参照ください。
主な用途
STDP2600ADT の用途: 6 件s: Embedded DisplayPort Monitor, Industrial Video Bridge, Video Test and Measurement Equipment, Docking and Portable Display Systems, Digital Signage Player Interface, Professional Video Equipment.
Embedded DisplayPort Monitor
The STDP2600ADT fits an embedded monitor that accepts HDMI 1.4 from a host or control system and drives a DisplayPort panel. Its I2C-to-AUX translator allows the upstream HDMI source to access EDID and transfer MCCS commands across the DisplayPort interface, reducing the need for separate source-to-sink control routing. The 81-BGA, 8 mm x 8 mm package supports compact integration, but the PCB must be designed for BGA assembly and controlled-impedance HDMI and DisplayPort routing. Before production, verify the target panel timing, refresh rate, color format, authentication behavior, and link-training requirements using the complete manufacturer datasheet.
おすすめ
Industrial Video Bridge
The STDP2600ADT can bridge HDMI 1.4 video from industrial equipment to a DisplayPort interface when the controller cannot drive the sink natively. Its documented EDID access and MCCS transfer help preserve control communication between the upstream HDMI source and downstream DisplayPort device, while the ASSR option supports embedded authentication workflows. Integration still requires careful partitioning of video and control signals, validation of supported timing, and a stable power design. Because the verified records do not state supply limits or maximum resolution, engineers must obtain those values from the manufacturer datasheet before component selection is finalized.
おすすめ
Video Test and Measurement Equipment
The STDP2600ADT is applicable to test equipment that must accept an HDMI 1.4 source and present a DisplayPort output to the device under test. EDID access and MCCS transfer provide control visibility across the converted link, which is useful when the instrument monitors negotiation behavior or exercises downstream control commands. The converter must still be treated as a protocol interface rather than a transparent wire, so timing formats and authentication conditions should be configured deliberately. BGA assembly, high-speed routing, and thermal validation are necessary for dependable instrument performance.
おすすめ
Docking and Portable Display Systems
The STDP2600ADT can be used in a docking architecture where an HDMI source feeds a portable or detachable DisplayPort display. The 81-BGA package, identified as an 8 mm by 8 mm BGA, allows a compact converter implementation, while EDID and MCCS transfer support display identification and control across the two protocols. A product designer should verify mechanical clearance, connector path loss, supported resolutions, refresh rates, and whether the required authentication workflow is compatible. The supplied records do not confirm power consumption, so thermal and battery-impact calculations require additional datasheet data.
おすすめ
Digital Signage Player Interface
The STDP2600ADT is relevant to digital-signage equipment that receives media through HDMI 1.4 but must drive a DisplayPort panel. The converter's documented I2C-to-AUX translation gives the upstream source a route for EDID access and MCCS commands, which can simplify control integration in a fixed display installation. For long deployment cycles, engineers should validate source and sink compatibility, cable margins, authentication requirements, and temperature behavior. Firmware must also account for any conversion constraints rather than treating HDMI and DisplayPort as electrically interchangeable interfaces.
おすすめ
Professional Video Equipment
The STDP2600ADT can support professional video equipment that accepts HDMI 1.4 while driving a DisplayPort processing path. Its EDID-access, MCCS-transfer, and ASSR functions make it more than a basic passive protocol adapter and help integrate control and embedded authentication requirements. The converter should be validated at the system level against the selected source, processing board, display, and cabling. Video timing, pixel formats, refresh rates, and any content-protection constraints must be confirmed from the complete Kinetic Technologies datasheet before production use.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STDP2600ADT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Manufacturer | Kinetic Technologies |
| Device Type | Advanced HDMI-to-DisplayPort converter |
| Input Interface | HDMI 1.4 |
| Output Interface | DisplayPort |
| Control Interfaces | I2C, SPI, and serial |
| Package | 81-BGA (8 mm x 8 mm) |
| EDID and MCCS Support | Supported through I2C-to-AUX translation |
| ASSR Support | Supported for embedded applications |
主な差別化要因
- Integrated HDMI-to-DisplayPort control-channel translation （vs A passive HDMI-to-DisplayPort adapter)
- Embedded authentication support （vs A basic protocol converter without ASSR support)
- Compact surface-mount integration （vs A board-level HDMI-to-DisplayPort adapter module)
設計ノート
Route the HDMI and DisplayPort high-speed interfaces as controlled-impedance differential pairs on a multilayer PCB, with reference-plane continuity and connector transitions verified against the Kinetic Technologies design guidance. Keep the I2C-to-AUX and SPI control paths away from high-speed lanes where possible. The supplied records do not include the complete pin map or recommended layout values, so trace widths, spacing, via geometry, and length matching must be taken from the manufacturer documentation rather than inferred.
Design the PCB around the 81-BGA package, 8 mm x 8 mm footprint, including adequate escape routing, thermal-via strategy, solder-mask definition, and assembly-process controls. Confirm the exact ball map and exposed-thermal-pad treatment from the official package drawing before release. Do not infer pin functions or thermal land geometry from the package size alone, because the captured distributor information confirms the BGA format but does not provide the detailed land pattern.
Do not treat the STDP2600ADT as a passive HDMI-to-DisplayPort adapter. It must correctly manage EDID access, MCCS transfer, authentication conditions, source timing, and DisplayPort link training. Validate the complete source-to-sink chain at the required resolution, refresh rate, color depth, and cable length. The ASSR option is documented for embedded applications, but selecting it without coordinating the source, firmware, and display authentication workflow can prevent expected operation.
Before implementing the power tree, obtain the converter's required supply voltages, current limits, sequencing requirements, and decoupling recommendations from the full Kinetic Technologies datasheet. Those values were not included in the supplied verified records, so no supply voltage or decoupling value is assumed here. Use the manufacturer's recommended capacitor types and placement around the confirmed power and ground balls, then verify startup behavior across all supported source and sink states.
コンプライアンス情報
The supplied verified web data contains product descriptions, distributor listings, and datasheet links but no explicit compliance declarations. Compliance status must be confirmed with Kinetic Technologies or an authorized distributor.
