STM32C542RCT6 - Cortex-M33 144MHz 256KB MCU | STMicroelectronics
部品番号: STM32C542RCT6 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.62 | $4.62 |
| 10 | $4.16 | $41.60 |
| 100 | $3.71 | $371.00 |
| 500 | $3.34 | $1,670.00 |
| 1,000 | $3.05 | $3,050.00 |
STM32C542RCT6 概要
A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, memory, and peripherals on one die. Within the semiconductor hierarchy, the STM32C542RCT6 sits under 32-bit microcontrollers -> embedded processors -> semiconductors, and belongs to the STM32C5 mainstream general-purpose family from STMicroelectronics.
Key features include the Arm Cortex-M33 32-bit RISC core with single-precision FPU, Memory Protection Unit (MPU), and DSP instructions; I3C and dual FDCAN interfaces for modern sensor and automotive-adjacent networking; and hardware cryptographic acceleration for secure embedded designs. The ECC-protected flash and SRAM improve reliability in applications where bit errors cannot be tolerated.
Architecturally, the Cortex-M33 implements the Armv8-M mainline profile, combining deterministic real-time behavior with TrustZone-class security features supported by the on-chip crypto block. The 144 MHz operating frequency and single-cycle FPU make it suitable for control-loop and signal-processing workloads that exceed classic Cortex-M4 mainstream parts.
Typical applications include industrial control and automation nodes, CAN/FDCAN networking gateways, IoT sensor hubs using I3C, consumer appliances, and secure connected devices.
Design consideration: the LQFP-64 10x10 mm footprint requires a standard surface-mount reflow process; plan decoupling capacitors on each VDD pin pair and follow the ST layout guidelines in the datasheet for VDDA/VSSA isolation to preserve ADC accuracy.
This page synthesizes distributor pricing tiers, drop-in same-family alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: STM32C542RCT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
STM32C542RBT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32C542RET6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32C542RCT7
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32C542RCT6 最大定格＆電気的特性
| Core Processor | ARM Cortex-M33 with FPU |
| Core Size | 32-bit |
| Max Clock Frequency | 144 MHz |
| Flash Memory | 256 KB (256K x 8) with ECC, 2 banks read-while-write |
| SRAM | 64 KB (including 32 KB with ECC) |
| User Data Flash | 64 KB, 2 banks |
| 電源電圧 | 3.3 V |
| Interfaces | I3C, dual FDCAN, hardware crypto |
| FPU | Single-precision |
| Memory Protection Unit | Yes (MPU) |
| DSP Instructions | Yes |
| パッケージ | 64-LQFP (10x10 mm) |
| 実装タイプ | Surface Mount |
| Series | STM32C5 |
STM32C542RCT6 ピン構成
| ピン 1 | VBAT — Battery backup supply for RTC and backup registers |
| ピン 2 | PC13 — GPIO port C, pin 13 |
| ピン 3 | PC14 — GPIO port C, pin 14 / oscillator function (per datasheet) |
| ピン 4 | PC15 — GPIO port C, pin 15 / oscillator function (per datasheet) |
| ピン 5 | VDD — Digital power supply |
| ピン 6 | VSS — Digital ground |
| ピン 7 | NRST — System reset (active low) |
| ピン 8 | PC0 — GPIO port C, pin 0 |
| ピン 9 | PC1 — GPIO port C, pin 1 |
| ピン 10 | PC2 — GPIO port C, pin 2 |
| ピン 11 | PC3 — GPIO port C, pin 3 |
| ピン 12 | VSSA — Analog ground |
| ピン 13 | VREF- — ADC negative voltage reference |
| ピン 14 | VREF+ — ADC positive voltage reference |
| ピン 15 | VDDA — Analog power supply |
| ピン 16 | PA0 — GPIO port A, pin 0 |
| ピン 17 | PA1 — GPIO port A, pin 1 |
| ピン 18 | PA2 — GPIO port A, pin 2 |
| ピン 19 | PA3 — GPIO port A, pin 3 |
| ピン 20 | VSS — Digital ground |
| ピン 21 | VDD — Digital power supply |
| ピン 22 | PA4 — GPIO port A, pin 4 |
| ピン 23 | PA5 — GPIO port A, pin 5 |
| ピン 24 | PA6 — GPIO port A, pin 6 |
| ピン 25 | PA7 — GPIO port A, pin 7 |
| ピン 26 | PC4 — GPIO port C, pin 4 |
| ピン 27 | PC5 — GPIO port C, pin 5 |
| ピン 28 | PB0 — GPIO port B, pin 0 |
| ピン 29 | PB1 — GPIO port B, pin 1 |
| ピン 30 | PB2 — GPIO port B, pin 2 / BOOT1 (per datasheet) |
| ピン 31 | PB10 — GPIO port B, pin 10 |
| ピン 32 | PB11 — GPIO port B, pin 11 |
| ピン 33 | VSS — Digital ground |
| ピン 34 | VDD — Digital power supply |
| ピン 35 | PB12 — GPIO port B, pin 12 |
| ピン 36 | PB13 — GPIO port B, pin 13 |
| ピン 37 | PB14 — GPIO port B, pin 14 |
| ピン 38 | PB15 — GPIO port B, pin 15 |
| ピン 39 | PC6 — GPIO port C, pin 6 |
| ピン 40 | PC7 — GPIO port C, pin 7 |
| ピン 41 | PC8 — GPIO port C, pin 8 |
| ピン 42 | PC9 — GPIO port C, pin 9 |
| ピン 43 | PA8 — GPIO port A, pin 8 |
| ピン 44 | PA9 — GPIO port A, pin 9 |
| ピン 45 | PA10 — GPIO port A, pin 10 |
| ピン 46 | PA11 — GPIO port A, pin 11 |
| ピン 47 | PA12 — GPIO port A, pin 12 |
| ピン 48 | PA13 — GPIO port A, pin 13 (SWDIO, per datasheet) |
| ピン 49 | VSS — Digital ground |
| ピン 50 | VDD — Digital power supply |
| ピン 51 | PA14 — GPIO port A, pin 14 (SWCLK, per datasheet) |
| ピン 52 | PA15 — GPIO port A, pin 15 |
| ピン 53 | PC10 — GPIO port C, pin 10 |
| ピン 54 | PC11 — GPIO port C, pin 11 |
| ピン 55 | PC12 — GPIO port C, pin 12 |
| ピン 56 | PD2 — GPIO port D, pin 2 |
| ピン 57 | PB3 — GPIO port B, pin 3 |
| ピン 58 | PB4 — GPIO port B, pin 4 |
| ピン 59 | PB5 — GPIO port B, pin 5 |
| ピン 60 | PB6 — GPIO port B, pin 6 |
| ピン 61 | PB7 — GPIO port B, pin 7 |
| ピン 62 | BOOT0 — Boot mode selection |
| ピン 63 | PB8 — GPIO port B, pin 8 |
| ピン 64 | PB9 — GPIO port B, pin 9 |
主な用途
STM32C542RCT6 の用途: 6 件s: Industrial Control and Automation, FDCAN Networking Gateways, IoT Sensor Hubs with I3C, Secure Connected Devices, Consumer Appliances and Motor Control, Metering and Data Logging.
Industrial Control and Automation
The STM32C542RCT6 fits industrial PLC I/O modules and machine-control nodes because its 144 MHz Cortex-M33 core with DSP instructions executes control loops and fieldbus stacks with margin, while dual FDCAN controllers connect directly to modern industrial CAN networks. ECC-protected flash and SRAM sustain data integrity in electrically noisy factory environments where single-bit upsets would otherwise corrupt state machines. In a typical node, the MCU runs the protocol stack and deterministic application loop while I3C and fast SPI/UART peripherals interface sensors and actuators, consolidating control, communication, and diagnostics in one 64-LQFP device.
おすすめ
FDCAN Networking Gateways
Dual on-chip FDCAN controllers make the STM32C542RCT6 a natural single-chip CAN-to-CAN or CAN-FD gateway. Each controller handles classical CAN 2.0 and CAN FD frames, so one MCU bridges a legacy 500 kbit/s segment to a 2-5 Mbit/s data-phase FD segment without external CAN controllers. The 144 MHz core provides headroom for filtering, translation, and logging, while the 256 KB flash stores both protocol stacks plus OTA-updatable firmware in the 2-bank read-while-write memory. Hardware crypto supports secured frame authentication where gateway tamper-resistance is required in industrial or charging-infrastructure deployments.
おすすめ
IoT Sensor Hubs with I3C
The I3C interface on the STM32C542RCT6 addresses the latest generation of digital sensors, offering higher data rates than I2C, in-band interrupts, and dynamic addressing, while remaining backward-compatible with existing I2C peripherals on the same bus. As a sensor-hub controller, the MCU aggregates IMU, environmental, and proximity sensor data, using its DSP instructions and single-precision FPU for sensor fusion at 144 MHz. The 64 KB user data flash provides local calibration-storage and event logging without external EEPROM, and hardware crypto supports device authentication toward cloud services in connected IoT deployments.
おすすめ
Secure Connected Devices
Hardware cryptographic acceleration plus the Cortex-M33 platform make the STM32C542RCT6 suitable for secure connected products such as smart meters, access-control terminals, and encrypted communication adapters. The crypto engine offloads symmetric and hash operations so firmware-level TLS or custom authentication runs comfortably within the 144 MHz budget. ECC on the main flash and half of the SRAM protects code and key material integrity against environmental bit faults, and the dual-bank read-while-write flash architecture enables safe in-field firmware updates - the new image is written to one bank while the application keeps running from the other.
おすすめ
Consumer Appliances and Motor Control
For appliance boards - compressors, fans, pumps, and user-interface controllers - the STM32C542RCT6 combines real-time motor-control capability (DSP instructions, FPU, fast ADCs) with mainstream pricing in one package. The 144 MHz core executes field-oriented control algorithms with single-precision arithmetic, while FDCAN or UART links to the main appliance controller. The 64-LQFP 10x10 mm footprint keeps PCB area compact for high-volume assembly. ECC-protected memory improves reliability in appliances with long service lives, and the STM32Cube ecosystem shortens development time with motor-control libraries and reference designs.
おすすめ
Metering and Data Logging
The dedicated 64 KB user data flash (2 banks) distinguishes the STM32C542RCT6 for metering and logging products: consumption records, event traces, and calibration tables live in this separate nonvolatile area without consuming code-flash budget or requiring external EEPROM. The 144 MHz Cortex-M33 with FPU processes measurement algorithms such as RMS computation and FFT-based harmonic analysis, while FDCAN or UART communicates with head-end systems. ECC protection on flash and 32 KB of SRAM safeguards accumulated billing data against corruption, an important consideration in utility products with multi-year field lifetimes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32C542RCT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32C542RBT6 | STM32C542RET6 | STM32C542RCT7 |
|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M33 with FPU | Arm Cortex-M33 with FPU | Arm Cortex-M33 with FPU | Arm Cortex-M33 with FPU |
| Max Clock Frequency | 144 MHz | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 256 KB with ECC | 128 KB with ECC | 512 KB with ECC | 256 KB with ECC |
| SRAM | 64 KB (32 KB ECC) | 64 KB (32 KB ECC) | 64 KB (32 KB ECC) | 64 KB (32 KB ECC) |
| Interfaces | I3C, dual FDCAN, crypto | I3C, dual FDCAN, crypto | I3C, dual FDCAN, crypto | I3C, dual FDCAN, crypto |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
主な差別化要因
- Mid-range flash capacity with ECC （vs STM32C542RBT6)
- Cost-effective within same package （vs STM32C542RET6)
- Dual FDCAN plus I3C on a mainstream-priced MCU （vs STM32C542RBT6)
設計ノート
For the 64-LQFP 10x10 mm footprint, place a 100 nF ceramic decoupling capacitor within 2-3 mm of each VDD/VSS pin pair, plus bulk 4.7-10 uF capacitance near the supply entry. Keep the VDDA/VSSA star-connected to the main ground plane and add a separate ferrite plus 1 uF + 10 nF network on VDDA to preserve ADC accuracy. Follow ST layout guidelines in the STM32C542xx datasheet analog section.
When migrating between STM32C542 flash-size variants (RBT6/RCT6/RET6), flash-size-dependent linker scripts and bootloader offset tables must be updated even though the parts are pin-compatible. Do not exceed the datasheet VDD maximum during power-up sequencing, and pull BOOT0 low through a 10 kOhm resistor for normal flash boot to avoid accidental system-memory boot on noise.
Route dual FDCAN buses using a proper 120-Ohm terminated differential pair with common-mode choke at the transceiver boundary. Because the MCU integrates two FDCAN controllers, keep the two CAN TX/RX pin groups physically separated from high-slew GPIO to reduce coupling at CAN FD data-phase bit rates. Use SWD via PA13/PA14 with a dedicated 5-pin header for production programming and debug.
The STM32C5 family runs from a nominal 3.3 V rail; size the regulator for the 144 MHz core current plus I/O budget per the datasheet electrical characteristics. If a brown-out risk exists, enable the on-chip programmable BOR and use the RESET pin supervisor behavior described in the datasheet to guarantee clean startup of the 2-bank read-while-write flash during firmware updates.
コンプライアンス情報
Compliance data not present in provided web data. Confirm RoHS/REACH status via the official ST product page ECOPACK certificate for STM32C542RCT6 before production release.
