STM32G071C8U3 - 64MHz Cortex-M0+ MCU | STMicroelectronics
部品番号: STM32G071C8U3 ✓ 生産中STM32G071C8U3 概要
A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The STM32G0 product hierarchy places this component within Arm Cortex-M0+ microcontrollers, embedded processors, and integrated circuits. Compared with a general-purpose application processor, the STM32G071C8U3 is designed for real-time control, monitoring, communications, and user-interface tasks where deterministic peripheral access and compact packaging are important.
The STM32G071C8U3 provides 64 KB of Flash for firmware and 36 KB of SRAM for working data. Its Arm Cortex-M0+ core can operate at up to 64 MHz. The manufacturer identifies the part as a member of the STM32G071x8/xB mainstream MCU family, which is intended for cost-sensitive embedded designs requiring a modern 32-bit architecture and a broad set of mixed-signal and connectivity functions.
The 48-pin UFQFPN package provides a practical balance between component density and board-accessible I/O. Because the UFQFPN package has contacts on its underside, correct PCB land-pattern design, solder-paste control, and thermal-via placement are essential. Board layout should follow the package drawing and pin-definition tables in the manufacturer datasheet rather than relying on a generic QFN footprint.
Typical uses include compact industrial control modules, building automation, appliance controllers, sensor-hub assemblies, low-cost instrument panels, and general embedded products. The 64 MHz operating speed supports responsive control logic, while 36 KB of SRAM provides working space for buffering sensor information, protocol handling, and application state.
The key design consideration is exact package and peripheral equivalence during firmware migration. Temperature grade, flash configuration, pin multiplexing, oscillator requirements, and peripheral availability can vary among similar STM32G071 order codes. Confirm the complete order-code matrix and pinout before replacing a device, especially when production quantities or automotive or industrial temperature requirements are involved.
This product page combines manufacturer device information with practical package, selection, application, and migration guidance. It also identifies which directly comparable order codes are documented as equivalents, helping engineers narrow hardware options before validating firmware, timing, and environmental requirements on the target board.
ドロップイン代替品: STM32G071C8U3 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32G071C8U3 （同一形状・フットプリント） — 相違点: Flash Memory, Package.
STM32G071C8U6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32G071C8U7
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32G071C8U3 最大定格＆電気的特性
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Product Series | STM32G0 |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB |
| SRAM | 36 KB |
| CPU Architecture | Arm Cortex-M0+ |
| Instruction Width | 32-bit |
| パッケージ | 48-pin UFQFPN |
| Package Dimensions | 7 mm x 7 mm |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40°C to 85°C / 105°C / 125°C, depending on order code |
| Product Family | STM32G071x8/xB mainstream microcontrollers |
STM32G071C8U3 7 mm x 7 mm ピン配置ガイド
STM32G071C8U3 (7 mm x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32G071C8U3.
詳細は データシート をご参照ください。
主な用途
STM32G071C8U3 の用途: 6 件s: Compact Industrial Control Module, Building Automation Controller, Appliance Control Platform, Sensor Hub and Condition Monitor, Low-Cost Instrument Control Panel, Battery-Powered Embedded Device.
Compact Industrial Control Module
The STM32G071C8U3 fits compact control modules that combine sensing, actuator supervision, local logic, and communications in a 48-pin surface-mount package. Its 64 MHz Arm Cortex-M0+ core provides control-loop processing capacity, while 64 KB of Flash stores application code and 36 KB of SRAM holds working buffers and protocol state. The 7 mm by 7 mm UFQFPN body supports compact board construction without sacrificing a full 32-bit architecture. Design the PCB around the manufacturer's package drawing, use the exposed thermal area for heat spreading, and verify that the selected temperature grade covers the enclosure's worst-case ambient temperature.
Building Automation Controller
The STM32G071C8U3 is suitable for building-automation nodes that coordinate sensors, digital outputs, local keypads, and serial communications. The 64 MHz Cortex-M0+ processor can service event-driven control tasks, and 36 KB of SRAM provides useful space for scheduling state and communication buffers. Firmware can use 64 KB of Flash for application logic, configuration handling, and a bootloader. Keep sensitive communication and relay-driving circuitry physically separated from analog and MCU traces, follow the datasheet decoupling recommendations, and confirm the available GPIO and peripheral assignments against the selected 48-pin package pinout.
Appliance Control Platform
For appliance control, the STM32G071C8U3 combines a 64 MHz 32-bit core with 64 KB of Flash and 36 KB of SRAM in a compact 48-pin UFQFPN package. These resources fit motor-sequencing logic, button handling, display updates, safety monitoring, and communications for compact household or commercial equipment. Use the SRAM for time-critical working data and the Flash for firmware and calibration parameters, while avoiding unnecessary external-memory designs. Power-supply layout, motor-transient isolation, watchdog behavior, and brownout handling are critical to reliable appliance operation; validate them with worst-case motor, temperature, and EMI conditions.
Sensor Hub and Condition Monitor
The STM32G071C8U3 fits compact sensor-hub assemblies that acquire measurements, apply filtering, supervise thresholds, and forward results over a serial interface. Its 64 MHz processing rate supports responsive sampling and control, and 36 KB of RAM can accommodate acquisition buffers and communication state. The 64 KB of Flash is appropriate for firmware, calibration tables, and configuration data in applications that do not require external storage. Keep analog sensor paths away from switching nodes and digital return currents, follow the datasheet pin descriptions for analog and reference functions, and account for package-specific restrictions such as VREF+ connectivity.
Low-Cost Instrument Control Panel
The STM32G071C8U3 is well suited to compact instrument panels that combine a display, controls, status LEDs, data acquisition, and configuration storage. Its 64 MHz Cortex-M0+ core can update a user interface while maintaining periodic sampling and service routines, while the 64 KB Flash and 36 KB SRAM provide a practical memory balance for this class of product. The 48-pin UFQFPN package can shorten board length, although assembly requires fine-pitch layout control and adequate solder-paste volume. Validate display-interface timing, button debounce behavior, ESD protection, and grounding before production release.
Battery-Powered Embedded Device
The STM32G071C8U3 can serve as the central controller in a battery-powered sensing or control device where a compact 48-pin package and efficient 32-bit processing are valuable. The Cortex-M0+ core operates up to 64 MHz, allowing designers to balance useful processing performance against duty-cycled low-power operation. The 64 KB Flash and 36 KB SRAM eliminate external memory in many compact designs. The exact low-power ratings and wake-up behavior must be taken from the manufacturer datasheet because those values are not listed here. Optimize sleep duration, peripheral shutdown, and sensor duty cycles, then measure leakage and wake time on the final board.
エンジニアリング参考データ: STM32G071C8U3 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32G071C8U6 | STM32G071C8U7 |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Series | STM32G0 | STM32G0 | STM32G0 |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| SRAM | 36 KB | 36 KB | 36 KB |
| Package | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) | 48-UFQFPN (7x7) |
主な差別化要因
- Direct same-family order-code alternatives （vs STM32G071C8U6)
- Higher-temperature-grade migration path （vs STM32G071C8U7)
- Mainstream STM32G0 positioning （vs STM32G071C8U6)
設計ノート
Use the manufacturer package drawing for the 48-pin, 7 mm by 7 mm UFQFPN land pattern, exposed-pad dimensions, solder mask, and paste recommendations. A generic QFN footprint may have the same pin count but incorrect thermal-pad geometry or pin numbering. Place the MCU near the board edge when thermal-via access is beneficial, and preserve copper beneath the exposed area without violating its electrical requirements.
Follow the datasheet recommendations for supply pins, decoupling, analog supply filtering, and startup sequencing. Place required bypass capacitors close to their associated supply and ground pins with short, low-inductance paths. Separate noisy switching returns from sensitive analog references and route power currents so they do not share narrow traces beneath the MCU. Verify brownout and power-consumption behavior at the system's minimum and maximum operating conditions.
Assign every net from the STM32G071C8U3 pin-description table, paying particular attention to alternate-function pins, oscillator connections, debug access, and package-specific VREF+ behavior. On packages without a dedicated VREF+ pin, VREF+ is internally connected with VDD and the internal voltage-reference buffer must remain disabled, as stated in the manufacturer datasheet. These constraints prevent firmware and analog-reference errors that a simple footprint comparison would not reveal.
Do not treat a matching UFQFPN package as sufficient proof that every STM32G071C8 suffix is interchangeable. Compare the order-code temperature grade, marking, qualification status, exposed-pad requirements, and device revision notes. When changing between STM32G071C8U3, STM32G071C8U6, and STM32G071C8U7, retain the original firmware and confirm that no peripheral, interrupt, bootloader, or calibration behavior depends on the suffix.
コンプライアンス情報
No explicit environmental or material-compliance declaration was identified for the exact order code. Confirm the current manufacturer product-page declarations, quality documentation, and order-code qualification information before production release.