STM32G441KBU6 - 170MHz Cortex-M4 MCU, 128KB Flash | STMicroelectronics
部品番号: STM32G441KBU6 ✓ 生産中STM32G441KBU6 概要
A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and I/O in one device. The STM32G4 family is positioned within the broader hierarchy of embedded processors, where Arm Cortex-M4 cores combine efficient interrupt handling, deterministic peripheral access, and broad ecosystem support. The Cortex-M4 architecture adds a single-precision floating-point unit, while the STM32 implementation adds the ART Accelerator for zero-wait-state execution from Flash and dedicated hardware for math and cryptographic operations.
Key features include 170 MHz maximum clock operation, 213 DMIPS performance, 128 KB of Flash, and 32 KB of SRAM. The DSP instruction set supports efficient fixed- and floating-point signal-processing workloads, and the math accelerator accelerates suitable matrix and vector operations. AES hardware encryption reduces software processing load for applications that protect stored or transmitted data. The memory organization also supports firmware and working data within one compact package, making the MCU suitable for space-constrained products.
The STM32G441KBU6 is positioned for industrial motor control, digital power conversion, robotics, communications equipment, and precision analog measurement. Its 170 MHz Cortex-M4 core can shorten control-loop execution time, while DSP instructions and the math accelerator improve signal-processing throughput. The 5 x 5 mm UFQFPN footprint supports compact assemblies but requires careful PCB layout, exposed-pad thermal management, and short analog and high-speed signal routing.
Design the PCB with a continuous ground plane, place decoupling capacitors beside every supply pin, and route sensitive analog inputs away from switching nodes and high-current outputs. Verify the complete pin assignment and exposed-pad connection in the manufacturer pinout table before layout because individual peripheral functions depend on package pin multiplexing. Firmware should also account for clock-tree configuration, memory sizing, peripheral initialization order, and appropriate fault handling.
This page organizes the key specifications, design constraints, use cases, and supported replacement information for engineers evaluating the STM32G441KBU6. It emphasizes practical selection guidance and PCB implementation considerations in addition to the core memory and processing specifications.
ドロップイン代替品: STM32G441KBU6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32G441KBU6 （同一形状・フットプリント） — 相違点: Instruction Set, Processor Core, Product Type.
STM32G431KBU6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32G441KBU6 最大定格＆電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 170 MHz |
| Peak Processing Performance | 213 DMIPS |
| Flash Memory | 128 KB |
| SRAM | 32 KB |
| Instruction Set | ARM 32-bit with DSP instructions |
| Memory Protection Unit | Yes |
| ART Accelerator | Yes, adaptive real-time accelerator |
| Math Accelerator | Yes |
| Hardware Encryption | AES |
| パッケージ | 32-pin UFQFPN, 5 x 5 mm |
| 実装タイプ | Surface mount |
STM32G441KBU6 32-pin ufqfpn, 5 x 5 mm ピン配置ガイド
STM32G441KBU6 (32-pin ufqfpn, 5 x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32G441KBU6.
詳細は データシート をご参照ください。
主な用途
STM32G441KBU6 の用途: 6 件s: Industrial Motor Control, Digital Power Conversion, Robotics and Motion Control, Precision Sensor Conditioning, Secure Connected Equipment, Data Acquisition and Test Equipment.
Industrial Motor Control
The STM32G441KBU6 fits compact motor-control controllers because its Arm Cortex-M4 core operates up to 170 MHz and delivers 213 DMIPS, while the FPU and DSP instructions accelerate current-loop, transform, and filtering calculations. The 128 KB Flash and 32 KB SRAM support control code, parameter storage, and real-time data buffers in one device. Use the MCU beside precision ADCs, current-sensing amplifiers, gate drivers, and position sensors. Keep switching-current paths separated from analog inputs, verify timer and ADC trigger mappings, and design the thermal path so regulator heat does not disturb measurement accuracy.
おすすめ
Digital Power Conversion
The STM32G441KBU6 is appropriate for digital power converters that combine fast control-loop execution with compact embedded logic. Its 170 MHz Cortex-M4 core and 213 DMIPS performance reduce the interval between sampling, calculation, and PWM update, while the DSP instruction set and FPU support filtering and compensation mathematics. The 128 KB Flash accommodates control code and lookup tables, and 32 KB SRAM can hold sampled data and intermediate results. Validate dead time, fault handling, ADC synchronization, and PWM resolution, and provide analog filtering that remains functional outside the processor’s control loop.
おすすめ
Robotics and Motion Control
The STM32G441KBU6 supports compact robotics modules that must process position feedback and execute motion-control algorithms under real-time constraints. At 170 MHz with 213 DMIPS, the Cortex-M4 core provides computational margin for encoder decoding, trajectory interpolation, and control updates. Its FPU, DSP instructions, and math accelerator improve operations involving angles, matrices, and filtering, while AES hardware can protect command or configuration traffic when required. Place the MCU near the encoder interface to limit noise pickup, use isolated communication boundaries where appropriate, and validate timing margins across all supported input rates.
おすすめ
Precision Sensor Conditioning
The STM32G441KBU6 can act as the central processing element in precision measurement systems combining analog sensors and digital compensation. Its 170 MHz core can run filtering and calibration routines quickly, while the Cortex-M4 FPU and DSP instructions support calculations such as sensor compensation, curve fitting, and digital filtering. The 128 KB Flash is suitable for calibration tables and production configuration, and 32 KB SRAM can hold acquisition buffers. Apply careful analog layout with short sensor traces, a continuous ground reference, and shielding from switching converters, then verify the complete acquisition chain under expected noise and temperature conditions.
おすすめ
Secure Connected Equipment
The STM32G441KBU6 suits compact connected equipment that must process local data while protecting firmware, configuration, or communications. Its AES hardware accelerates supported encryption operations, and its 170 MHz Cortex-M4 core leaves performance available for protocol handling and application logic. The 128 KB Flash and 32 KB SRAM provide an integrated memory base for moderate firmware and communication buffers. Security still depends on protected boot, authenticated firmware updates, safe key provisioning, and appropriate peripheral isolation. Select the external communications companion according to protocol, range, certification, and power requirements rather than MCU processor speed.
おすすめ
Data Acquisition and Test Equipment
The STM32G441KBU6 is useful in compact data-acquisition and test modules where local sampling, signal processing, and control must be handled without a separate processor. The 213 DMIPS Cortex-M4 performance supports real-time acquisition and filtering, while DSP instructions and the FPU improve numerical throughput. Its 128 KB Flash stores firmware and calibration data, and 32 KB SRAM can buffer intermediate samples. Keep analog inputs short and symmetric, reference the digital return current properly, and separate sensitive measurement paths from power-conversion stages. Firmware should include calibration, gain correction, overrun handling, and deterministic sampling-trigger logic.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32G441KBU6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32G431KBU6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 32-pin UFQFPN, 5 x 5 mm | 32-pin UFQFPN, 5 x 5 mm |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum Frequency | 170 MHz | 170 MHz |
| Flash Memory | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB |
| DSP Instructions | Yes | Yes |
| Math Accelerator | Yes | Yes |
| AES Hardware | Yes | Yes |
主な差別化要因
- Compact high-performance processing （vs STM32G431KBU6)
- Integrated numerical processing resources （vs STM32G431KBU6)
- Hardware-assisted data protection （vs STM32G431KBU6)
設計ノート
Use the manufacturer package drawing to define the 32-pin UFQFPN land pattern, exposed-pad geometry, solder mask, and paste pattern. Place the required bypass and bulk capacitors next to their associated power pins rather than distributing them around the board. Maintain uninterrupted ground beneath the device where the package design permits, and use short return paths for high-current outputs. The verified package is 5 x 5 mm, but a generic QFN footprint must not be assumed because pad dimensions and exposed-pad requirements are package-specific.
Separate analog inputs, reference signals, and communication interfaces from switching-power stages and motor-drive outputs. Route sensitive inputs as short traces over a continuous ground reference, and use guarding or shielding when the measurement environment includes large switching transients. Confirm ADC and timer channel assignments against the package pin table before routing. For communication interfaces, control impedance and return-path continuity according to the selected transceiver’s requirements rather than treating every peripheral as a low-speed GPIO.
A shared package does not guarantee that a substitute MCU is a drop-in replacement. Validate pin multiplexing, power pins, clock pins, boot behavior, interrupts, memory organization, peripheral timing, and firmware support before substitution. For the STM32G441KBU6, verify that the intended PWM outputs, ADC channels, debug interface, communications peripherals, and analog functions remain available on the exact package pins. Preserve an abstraction layer in firmware where practical so that approved board-to-board variants can be supported without extensive low-level rework.
Calculate the MCU supply budget from the core, I/O, analog, and peripheral loads required by the complete design, then verify regulator headroom during startup and maximum activity. Use the manufacturer’s electrical characteristics to set minimum supply levels, regulator accuracy, decoupling, and power-up sequencing. Avoid placing analog accuracy-critical loads behind digital power gating without controlled sequencing. The 170 MHz maximum frequency is a performance rating, not a substitute for a complete power-budget and thermal-design review.
コンプライアンス情報
Compliance declarations are not stated in the verified product listings and must be confirmed using the manufacturer product documentation or declaration for the exact ordering code.