STM32L100R8T6 - 32MHz Cortex-M3 64KB MCU | STMicroelectronics
部品番号: STM32L100R8T6 ✓ 生産中STM32L100R8T6 概要
A microcontroller is the programmable control element of an embedded system. It integrates a processor core, program memory, working memory, peripherals, clocking, and I/O into one device. In the taxonomy of electronic components, the STM32L100R8T6 is an embedded microcontroller, a semiconductor and an application-specific integrated circuit. Its ARM Cortex-M3 core provides a 32-bit instruction set suitable for real-time control, communication handling, data acquisition, and low-power sensing.
The principal headline specifications are a 32 MHz operating frequency, 64 KB of Flash program memory, and a 64-LQFP package. The STM32L100 family also incorporates USB connectivity according to the manufacturer product page. Its 10 x 10 mm package allows a relatively compact board footprint while retaining a leaded package that is easier to inspect and assemble than a very fine-pitch array. Specific RAM capacity, supply-voltage limits, GPIO count, and low-power current figures are marked separately where a confirmed value is required.
The ARM Cortex-M3 architecture supports efficient control-oriented software and access to the STM32 peripheral ecosystem. The STM32L100R8T6 combines that processing core with low-power-oriented design and USB, making it useful where a design must combine local control with bus-powered connectivity. The manufacturer groups the STM32L100C6, STM32L100R8 and STM32L100RB devices as a product line addressing ultra-low-power embedded applications.
Typical uses include low-power sensor nodes, USB-connected data-acquisition modules, compact industrial controllers, battery-operated instruments, and accessory boards that need a dedicated microcontroller close to a sensor or actuator. In such systems, the device can execute firmware locally, manage digital interfaces, and reduce the need for a separate USB interface controller.
Design planning should begin with the manufacturer's pin-description table and package drawings. Verify the selected 64-LQFP footprint, supply rails, decoupling requirements, clock configuration, programming interface, and USB transceiver connection against the official datasheet. Firmware decisions should also account for the peripheral set and memory limits of the exact orderable device rather than assuming that every STM32L1 member is interchangeable.
This page consolidates manufacturer and distributor information with a package-specific comparison, drop-in replacement candidates, and application-focused engineering guidance. It highlights where the STM32L100R8T6 is a direct fit and where a different flash size, temperature grade, peripheral set, or vendor ecosystem requires board-level and firmware verification.
ドロップイン代替品: STM32L100R8T6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L100R8T6 (同一形状・フットプリント) — 相違点: Connectivity, Package.
STM32L100R8T6A
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L151R8T6ATR
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L152R8T6A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32L100R8T6 最大定格&電気的特性
| Product Type | 32-bit ultra-low-power ARM Cortex-M3 microcontroller |
| Manufacturer | STMicroelectronics |
| Series | STM32L1 |
| CPU Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| 最大クロック周波数 | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| Connectivity | USB |
| パッケージ | 64-LQFP (10 x 10 mm) |
| ピン数 | 64 pins |
| 実装タイプ | Surface mount |
STM32L100R8T6 64-lqfp (10 x 10 mm) ピン配置ガイド
STM32L100R8T6 (64-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L100R8T6.
詳細は データシート をご参照ください。
主な用途
STM32L100R8T6 の用途: 6 件s: Battery-Powered Sensor Node, USB Data-Acquisition Module, Compact Industrial Controller, USB-Cowered Configuration Adapter, Battery-Operated Measurement Instrument, Low-Power Environmental Monitor.
Battery-Powered Sensor Node
The STM32L100R8T6 fits battery-powered sensor nodes that require local signal handling and low-power operation. Its 32 MHz ARM Cortex-M3 core provides 32-bit control, while the STM32L100 family's ultra-low-power positioning supports duty-cycled measurement designs. The 64 KB of Flash stores firmware and calibration tables without requiring an external program-memory device. USB connectivity can simplify configuration, firmware updates, or data transfer during development. Because the exact current ratings and package-level pin functions must be confirmed, prototype the power modes and peripheral assignments on the manufacturer reference footprint before committing to a long-life battery product.
おすすめ
USB Data-Acquisition Module
The STM32L100R8T6 is well suited to a compact USB data-acquisition module because it combines a 32 MHz Cortex-M3 processor, 64 KB of Flash and USB connectivity in one 64-LQFP device. Firmware can sample sensors, apply filtering, maintain calibration, and present results over USB while keeping the processing local to the module. This reduces the need for a separate USB bridge in a small enclosure. Layout the USB data lines as controlled-impedance connections, follow the transceiver and protection recommendations in the manufacturer datasheet, and account for bus-powered current limits before selecting the USB power source.
おすすめ
Compact Industrial Controller
The STM32L100R8T6 can serve as the central controller in a compact industrial module that handles digital I/O, communications, and actuator sequencing. Its 32-bit Cortex-M3 architecture supports responsive multitasking, and the STM32L1 family's low-power design is valuable in equipment where standby consumption affects heat generation and operating cost. The 10 x 10 mm 64-LQFP package leaves room for connectors and isolation components around the controller. Production designs should verify the exact GPIO count, supply range, peripheral assignments, and automotive or industrial qualification status from the ordering information rather than assuming that all STM32L1 variants share identical resources.
おすすめ
USB-Cowered Configuration Adapter
A USB-powered configuration adapter can use the STM32L100R8T6 to translate a host interface into a low-power embedded control channel. The 64 KB of Flash accommodates protocol handlers, device identification, and update logic, while USB connectivity removes the need for a separate bridge IC in many designs. The Cortex-M3 core is appropriate for command parsing and deterministic peripheral control. Because USB bus power imposes a strict current budget, select operating modes and peripheral loads that fit the available supply. Use the manufacturer reference schematic to establish correct data-line routing, series impedance, decoupling, and the relationship between VDD and the USB transceiver supply.
おすすめ
Battery-Operated Measurement Instrument
The STM32L100R8T6 fits a portable measurement instrument that must combine sensor control, local computation, and periodic data transfer. Its 32 MHz Cortex-M3 core can manage sampling sequences, digital filtering, and a local status display while the STM32L1 low-power architecture supports long intervals between activity. USB connectivity allows a desktop tool to exchange configuration files and logged results without adding another interface controller. Designers should use the confirmed deep-sleep and active-mode currents to calculate battery life, provide local storage only if the verified RAM and Flash budget allows it, and isolate analog inputs appropriately from digital switching activity.
おすすめ
Low-Power Environmental Monitor
Environmental monitoring stations can use the STM32L100R8T6 for duty-cycled sensor readings, threshold evaluation, and status reporting. The 32-bit core provides adequate arithmetic for compensating measurements and filtering noisy inputs, and 64 KB of Flash supports embedded application code and calibration data. The ultra-low-power STM32L1 positioning is especially relevant when the monitor runs on batteries or harvests ambient energy. USB connectivity offers a convenient commissioning path, while low-power serial interfaces can carry results to a longer-range radio. Validate the sensor's power requirements, the controller's exact sleep currents, and analog grounding against the datasheets of both devices before finalizing the power budget.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L100R8T6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L100R8T6A | STM32L151R8T6A | STM32L152R8T6A |
|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| Connectivity | USB | USB | USB | USB |
| Series Positioning | STM32L1 ultra-low-power value line | STM32L100 family | STM32L151 family | STM32L152 family |
主な差別化要因
- Direct family-matching replacement path (vs STM32L100R8T6A)
- USB connectivity in a compact low-power controller (vs STM32L151R8T6A)
- Compact 10 x 10 mm leaded footprint (vs STM32L152R8T6A)
設計ノート
Use the manufacturer LQFP land pattern rather than scaling a generic 64-pin footprint. Confirm pad dimensions, pin-1 orientation, solder-mask clearance, and the exposed lead finish against the official package drawing. Place the decoupling network at the associated supply pins and reserve the STMicroelectronics programming interface footprint so production programming and post-assembly debugging remain straightforward.
Build the supply budget from the confirmed active, sleep, and USB operating currents rather than a single nominal current value. The STM32L100R8T6 targets low-power systems, but peripherals, pull resistors, indicator LEDs, and USB circuitry can dominate board-level consumption. Measure current on a representative prototype in each production mode, because the USB interface may prevent the board from entering its lowest-power state.
Keep USB data routing short, controlled, and away from analog inputs and switching nodes. Apply the device-specific impedance and routing guidance from the manufacturer reference schematic, provide the recommended transceiver support components, and terminate unused inputs consistently. Separate sensitive sensor returns from the digital return path where practical, then validate the completed board for radiated emissions and susceptibility in the target environment.
Do not treat the T6 suffix, T6A suffix, and reel-ordering suffix as interchangeable without checking the ordering table. The STM32L100R8T6A can be a close electrical substitution, while a packing suffix may change only reel orientation or delivery format. Firmware image selection, device-ID handling, temperature grade, and programmer target settings must also be verified before the substitution enters production.
コンプライアンス情報
Compliance status should be confirmed from the product-specific declarations and material declarations listed by the manufacturer. AEC-Q100 qualification is not established for this orderable device in the available product information.