STM32L431KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
部品番号: STM32L431KBU6 ✓ 生産中STM32L431KBU6 概要
An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while maintaining responsive real-time processing. The STM32L4 series combines an Arm Cortex-M4 processor, embedded nonvolatile memory, analog conversion capabilities, and communication peripherals in one compact component. This places the MCU within the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M microcontroller, and low-power embedded-control device.
The STM32L431KBU6 operates up to 80 MHz and includes 128 KB of Flash memory. Its Arm Cortex-M4 core supports single-precision floating-point instructions and digital signal-processing instructions, making it suitable for control loops, sensor conditioning, and local signal processing. The 32-pin UFQFPN package supports compact PCB layouts, while the manufacturer product page identifies the device as part of the STM32L431xx family of ultra-low-power microcontrollers.
The STM32L431KBU6 integrates serial communication, general-purpose input and output, timer, and analog resources intended for embedded control. These functions allow a design to combine acquisition, computation, and communication without requiring several discrete components. Its 80 MHz processing ceiling provides additional timing margin for protocol handling and control algorithms when compared with lower-frequency microcontrollers in the same broad power-conscious market.
Typical uses include battery-powered environmental sensors, compact industrial monitoring equipment, low-power IoT endpoints, building controls, portable measurement instruments, and motor or actuator control nodes. The MCU is especially appropriate where frequent wake-up, efficient standby operation, local analog measurement, and serial connectivity are more important than a large package or a very high GPIO count.
Designers should place decoupling capacitors directly at the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the exposed-pad and thermal-land requirements of the UFQFPN package. Firmware should use the STM32 low-power modes deliberately and verify wake-up timing, peripheral clock requirements, and analog-reference stability before production release.
This product page combines the manufacturer specifications with practical implementation guidance, application-focused design context, and a parameter-by-parameter comparison with identified same-footprint alternatives. It is intended to help engineers confirm mechanical fit, memory capacity, processor requirements, and feature differences before committing an STM32L431KBU6 to a new board design.
ドロップイン代替品: STM32L431KBU6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L431KBU6 （同一形状・フットプリント） — 相違点: Package, Flash Memory, Product Type.
STM32L431KBU3
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32L432KBU6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32L431KBU6 最大定格＆電気的特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| Manufacturer | STMicroelectronics |
| Processor Core | Arm Cortex-M4 |
| Instruction Set | 32-bit Arm Thumb-2 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Floating-Point Unit | Single-precision FPU |
| DSP Instruction Support | Yes |
| パッケージ | 32-pin UFQFPN |
| Package Dimensions | 5 mm x 5 mm |
| 実装タイプ | Surface mount |
STM32L431KBU6 5 mm x 5 mm ピン配置ガイド
STM32L431KBU6 (5 mm x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L431KBU6.
詳細は データシート をご参照ください。
主な用途
STM32L431KBU6 の用途: 6 件s: Battery-Powered Environmental Sensors, Compact Industrial Monitoring, Low-Power IoT Endpoints, Portable Measurement Instruments, Building Control and HVAC Nodes, Motor and Actuator Control.
Battery-Powered Environmental Sensors
The STM32L431KBU6 fits environmental monitoring because its Arm Cortex-M4 core reaches 80 MHz while retaining the STM32L4 family's ultra-low-power positioning. The 128 KB of embedded Flash can hold acquisition routines, filtering logic, calibration data, and communication firmware without requiring external memory. A typical design would pair the MCU with a temperature, humidity, pressure, or gas sensor, wake the device for periodic measurements, and place it back into a low-power mode between samples. The single-precision FPU and DSP instructions are useful for filtering sampled sensor data locally. The 32-pin 5 mm by 5 mm UFQFPN package also keeps the controller compact enough for wearable, smart-home, and distributed IoT nodes. Final battery-life performance should be verified using the selected sleep mode, sensor duty cycle, and measured current rather than processor frequency alone.
おすすめ
Compact Industrial Monitoring
Industrial monitoring equipment benefits from the STM32L431KBU6 because it combines 80 MHz 32-bit processing, 128 KB of Flash, and integrated control resources in a 32-pin UFQFPN package. The MCU can execute sensor conditioning, filtering, threshold evaluation, event logging, and serial data handling while occupying less board area than a larger-lead-count package. Its Cortex-M4 floating-point and DSP instruction support can reduce the computational burden on a host processor when measurements must be filtered or transformed locally. A practical installation might monitor temperature, vibration, current, or digital equipment state and report through an industrial serial interface. Low-power behavior is valuable in remote or battery-backed installations, but the final enclosure, isolation, protection network, and power budget remain important because the MCU package does not provide those protections by itself.
おすすめ
Low-Power IoT Endpoints
The STM32L431KBU6 is appropriate for IoT endpoints that periodically acquire data, validate sensor readings, and communicate through a separate radio or network module. At up to 80 MHz, the Cortex-M4 core provides enough performance for protocol formatting, local filtering, state management, and device-health monitoring, while 128 KB of Flash supports embedded networking and application firmware. Its small 5 mm by 5 mm UFQFPN package leaves space for sensors and radio circuitry on compact boards. Designers should pair low-power operation with a deterministic wake-up policy, use the manufacturer clock and power-management configuration procedures, and avoid leaving unused peripherals clocked. If the radio requires continuous high-current bursts, the MCU should remain in a suitable standby state between transmissions so that the overall duty cycle, rather than the 80 MHz processing capability, determines average power consumption.
おすすめ
Portable Measurement Instruments
Portable instruments can use the STM32L431KBU6 for measurement acquisition, calibration, display control, and data logging because the MCU combines an 80 MHz Arm Cortex-M4 core with 128 KB of Flash in a compact package. Single-precision floating-point support is valuable when performing scaling, filtering, fitting, or unit conversion on sampled data, while DSP instructions accelerate common fixed-point operations. The 32-pin UFQFPN outline is useful for reducing instrument size, although the exposed thermal land and fine-pitch routing require careful PCB layout. For a handheld product, the designer should define which functions must remain active during measurement and which can be gated during idle periods. Analog accuracy, sensor excitation, reference stability, and calibration storage should be evaluated separately from the MCU's digital processing performance because those requirements often determine the practical accuracy of the complete instrument.
おすすめ
Building Control and HVAC Nodes
The STM32L431KBU6 suits building-control nodes that combine environmental sensing with actuator supervision in a small distributed controller. Its 80 MHz Cortex-M4 core can run communication stacks, debounce and timing logic, control-state machines, and local diagnostics, while the 128 KB Flash capacity provides room for application firmware and protocol handlers. The compact 32-pin UFQFPN package is valuable in wall-mounted controls, room sensors, and small HVAC interfaces where board area is constrained. A typical design may read temperature, humidity, occupancy, and contact inputs, then control a relay, valve, or fan through external driver circuitry. The MCU should use scheduled wake-ups or event-driven interrupts to minimize its contribution to system standby power. Relay transients, contact debounce, ESD protection, and fail-safe behavior must be implemented outside the MCU and verified under worst-case wiring conditions.
おすすめ
Motor and Actuator Control
The STM32L431KBU6 can serve as the logic controller for small motors, solenoids, valves, and actuators because its Cortex-M4 processor executes timing and closed-loop control at up to 80 MHz. The floating-point unit assists with proportional, integral, and derivative calculations, and the 128 KB Flash capacity accommodates control code plus configuration and fault logs. In a typical design, the MCU receives position or sensor commands, updates control state, and generates timing signals for an external power stage. The UFQFPN package helps reduce controller size, but it does not replace gate drivers, current sensing, or protection components. Timing should be validated with the motor or actuator attached because inductive transients and supply disturbances can affect real-time behavior. The design must also prevent unsafe motion during firmware resets, communication loss, and power interruptions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L431KBU6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L431KBU3 | STM32L432KBU6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-UFQFPN (5x5 mm) | 32-QFN class | 32-QFN class |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 256 KB |
| Floating-Point Unit | Single-precision FPU | Single-precision FPU | Single-precision FPU |
| DSP Instruction Support | Yes | Yes | Yes |
| Ordering Suffix | U6 | U3 | U6 |
主な差別化要因
- Compact Cortex-M4 implementation with embedded storage （vs STM32L432KBU6)
- Same STM32L4 performance ceiling in the compared package class （vs STM32L431KBU3)
- Single-precision floating-point and DSP support in a low-power MCU （vs STM32L432KBU6)
設計ノート
Use the manufacturer UFQFPN land pattern rather than a generic 32-pin QFN footprint. Confirm exposed-pad dimensions, copper thermal-via recommendations, solder-mask clearance, and paste stencil area from the package drawing. Place the device-side input and output capacitors close to their corresponding supply pins, and keep the exposed thermal land unobstructed where possible. Fine-pitch routing around the 5 mm by 5 mm package should be checked for manufacturing capability before committing the board to fabrication.
Plan the power tree around the MCU's active and low-power operating states. Gate or disable unused peripherals, preserve clock configuration during sleep, and avoid long periods of high-frequency operation when the workload can be scheduled around data arrivals. Validate current consumption with the final firmware, sensor loads, pull states, and board leakage rather than using processor frequency as a proxy. The 80 MHz maximum is a performance ceiling, not a requirement to run continuously at that rate.
Keep analog inputs, voltage references, and low-level sensor connections away from clock, debug, and fast-switching digital nets. Use a continuous ground reference beneath and around the device, return analog grounds to the appropriate quiet point, and minimize loop area for sensitive measurement paths. If communication lines leave the board, control impedance and provide the protection required by the interface. Review the final placement against both the pin table and the mechanical drawing because a pin can be electrically suitable but still produce undesirable signal coupling in a crowded layout.
Do not treat a related STM32L4 MPN as an automatic drop-in replacement. The suffix can change temperature grade, voltage behavior, qualification, or ordering interpretation, and an increased Flash capacity does not guarantee that every pin function is identical. Before substitution, compare the pin table, package drawing, clock limits, supply range, Flash and RAM requirements, boot behavior, peripheral mapping, and lifecycle status. Revalidate firmware and peripheral initialization on the proposed alternative even when the package and processor frequency match.
コンプライアンス情報
Compliance declarations require confirmation against the exact STM32L431KBU6 ordering code and the current STMicroelectronics material declaration.