STMicroelectronics

STM32L496ZET6 - 80MHz Cortex-M4 512KB MCU | STMicroelectronics

部品番号: STM32L496ZET6 ✓ 生産中
3.3 V Vdss 25 nA Id 144-LQFP (20 x 20 mm) Package 80 MHz Speed 512 KB Memory
MOQ: 1 |

STM32L496ZET6 概要

STMicroelectronics STM32L496ZET6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a floating-point unit, operating up to 80 MHz, 512 KB of flash memory, and 320 KB of SRAM in a 144-LQFP 20 x 20 mm package. It combines high processing performance with 100 DMIPS capability and supports USB OTG FS, audio, HASH, and an external switched-mode power supply interface.

An ultra-low-power microcontroller is a semiconductor designed to balance useful processing performance with minimal energy consumption during active operation, sleep, and shutdown. The STM32L4 product family belongs to the hierarchy of embedded processing: Arm Cortex-M microcontroller, 32-bit microcontroller, embedded microcontroller, and semiconductor. This combination makes the STM32L496ZET6 suitable for connected industrial equipment, portable instruments, low-power controllers, and systems requiring a broad set of serial and analog peripherals.

Key features include an 80 MHz Arm Cortex-M4 processor with FPU, 512 KB of program flash, and 320 KB of SRAM. The device operates from a 3.3 V supply as identified in the product listing, supports USB OTG FS, and includes hardware capabilities associated with audio and cryptographic HASH operations. Its 144-pin LQFP package provides a high pin count suitable for designs requiring extensive external connectivity.

The STM32L4 architecture combines a 32-bit RISC core with integrated flash, SRAM, clock management, communication peripherals, and low-power modes. The manufacturer describes the STM32L496xx family as operating up to 80 MHz and delivering 100 DMIPS. Its integrated feature set can reduce the need for external interface or signal-conditioning components, although the exact peripheral mix and electrical limits for the selected device must be confirmed in the manufacturer pin-description and electrical-characteristics tables.

Typical applications include industrial control modules, USB-connected data acquisition units, low-power embedded gateways, portable measurement equipment, and audio-capable embedded systems. The 80 MHz core supports responsive control and communication tasks, while 320 KB of SRAM provides useful working memory for protocol stacks, buffering, and real-time application code.

PCB design should use the manufacturer recommended decoupling, clock, reset, and USB layout practices. Confirm all 144 pin assignments in the package pinout before routing, especially power, ground, analog, debug, and USB signals. Because LQFP lead pitch and pad geometry constrain assembly, verify the recommended land pattern and manufacturing rules before releasing artwork.

This product record combines manufacturer and distributor technical information, lifecycle status, packaging details, application guidance, and a parameter comparison framework. It also highlights where engineering data must be confirmed in the STM32L496xx datasheet, helping designers evaluate the STM32L496ZET6 before schematic capture and PCB layout.

ドロップイン代替品: STM32L496ZET6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

STM32L496ZET6 最大定格&電気的特性

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Architecture 32-bit RISC
Maximum CPU Frequency 80 MHz
Performance 100 DMIPS
Flash Memory 512 KB
Flash Organization 512K x 8 bits
SRAM 320 KB
動作電源電圧 3.3 V
USB Support USB OTG FS
Audio Support Audio capability
Security Function HASH
Power Architecture External SMPS support
パッケージ 144-LQFP (20 x 20 mm)
実装タイプ Surface mount
Packaging Tray
ライフサイクル状態 Active
RoHS Compliance RoHS3 compliant
ピン数 144 pins
シャットダウン電流 25 nA

STM32L496ZET6 144-lqfp (20 x 20 mm) ピン配置ガイド

STM32L496ZET6 (144-lqfp (20 x 20 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

STM32L496ZET6 の 144-lqfp (20 x 20 mm) パッケージピン配置図

詳細なピン配置データはありません: STM32L496ZET6.

詳細は データシート をご参照ください。

主な用途

STM32L496ZET6 の用途: 6 件s: Industrial Control Modules, USB Data Acquisition, Low-Power Portable Instruments, USB-Capable Embedded Gateways, Embedded Audio Control, Secure Connected Equipment.

🏭

Industrial Control Modules

The STM32L496ZET6 fits industrial control modules that combine real-time processing with a substantial number of mixed-signal and communication connections. Its 80 MHz Arm Cortex-M4 core and FPU provide headroom for control loops, diagnostics, communication tasks, and local data processing, while 320 KB of SRAM supports protocol buffers and application state. The 512 KB of flash accommodates firmware, configuration, and calibration data. The 144-LQFP package exposes more pins than smaller MCU packages, making it useful when a design needs numerous GPIO, timer, serial, debug, or analog functions. Engineer the system for its actual industrial temperature grade, EMC environment, isolation requirements, and regulatory boundaries rather than treating MCU performance alone as sufficient qualification.

🧩

USB Data Acquisition

The STM32L496ZET6 is well suited to USB-connected data acquisition when the peripheral must move samples or configuration data while also performing local control. Its USB OTG FS interface, 80 MHz Cortex-M4 processor, and 320 KB of SRAM allow timing-critical acquisition routines to coexist with USB protocol handling and buffering. The 512 KB of flash provides room for firmware and calibration parameters. Designers should use short, impedance-controlled USB traces, compliant routing of the differential pair, proper decoupling, and a crystal or clock network that meets USB timing requirements. The MCU does not replace the analog front end; sensor excitation, amplification, filtering, reference design, and input protection remain essential for accurate measurements.

📱

Low-Power Portable Instruments

The STM32L496ZET6 can serve as the central controller in a portable measurement instrument where processing capability and battery life are both important. Its ultra-low-power STM32L4 architecture supports low-duty-cycle operation, while the Cortex-M4 core provides enough performance for signal conditioning control, data logging, and user-interface updates. The 320 KB of SRAM enables buffering and state management without continuous external-memory access, and 512 KB of flash holds application code. A practical design should calculate the average current from the selected sleep mode, peripheral activity, display load, and sensor duty cycle. Component leakage, regulator quiescent current, and the MCU operating frequency can materially change battery life even when the controller is active only briefly.

🌐

USB-Capable Embedded Gateways

The STM32L496ZET6 supports compact embedded gateway designs that connect a host computer or service equipment to local sensors and actuators. USB OTG FS provides a direct peripheral interface, while the 80 MHz Cortex-M4 core can service multiple protocol and control tasks. Its 320 KB of SRAM is useful for message queues and short data windows, and 512 KB of flash supports gateway firmware and configuration storage. The large 144-LQFP footprint provides a broad pin complement for UART, SPI, I2C, timers, and discrete I/O, although the exact peripheral instance and alternate-function mapping must be checked for every signal. In deployed systems, include watchdog recovery, controlled USB enumeration behavior, brownout handling, and secure firmware-update provisions.

🎧

Embedded Audio Control

The STM32L496ZET6 can be used in embedded audio-control systems that combine digital signal processing, communication, and deterministic peripheral control. Its Cortex-M4 FPU supports efficient floating-point operations, the 320 KB of SRAM can accommodate audio buffers and control structures, and the manufacturer identifies audio capability within the STM32L496xx family. The 512 KB of flash provides space for control code and audio data, depending on storage requirements. For a production design, map the selected audio interface, clock tree, codec control lines, and DMA channels against the device pin table. Maintain short, continuous data paths, provide appropriate grounding and decoupling, and validate timing under worst-case flash-wait-state and bus-load conditions.

🖥️

Secure Connected Equipment

The STM32L496ZET6 is applicable to connected equipment requiring authenticated data handling, local control, and USB connectivity. The manufacturer identifies HASH capability in the STM32L496xx family, and the 80 MHz Cortex-M4 core can support protocol processing alongside the hash accelerator. The 512 KB of flash and 320 KB of SRAM allow firmware, keys, certificates, and communication buffers to be managed locally. Security effectiveness depends on the complete design: protect confidential material in flash, restrict debug access, implement a secure boot policy, keep update interfaces authenticated, and avoid treating a hardware hash accelerator as a substitute for careful key management. Use only the exact security features and package assignments documented for the STM32L496ZET6 variant.

What is the STM32L496ZET6?
The STM32L496ZET6 is an ultra-low-power, 32-bit Arm Cortex-M4 microcontroller from STMicroelectronics. According to the manufacturer product page and STM32L496xx datasheet, it operates up to 80 MHz, includes an FPU, provides 100 DMIPS performance, and is packaged in a 144-LQFP 20 x 20 mm package. The ZET6 configuration includes 512 KB of flash and 320 KB of SRAM.
What are the key specifications of STM32L496ZET6 that engineers should know?
The STM32L496ZET6 combines an 80 MHz Arm Cortex-M4 core, FPU, 100 DMIPS performance, 512 KB of flash, 320 KB of SRAM, and USB OTG FS in a 144-LQFP package. The manufacturer also identifies audio, HASH, and external SMPS capabilities for the STM32L496xx family. These specifications position it for embedded control, data acquisition, connected equipment, and USB-capable low-power systems.
How much flash memory and SRAM does STM32L496ZET6 have?
The STM32L496ZET6 has 512 KB of flash memory and 320 KB of SRAM. The DigiKey listing identifies the flash as 512K x 8 bits, while the manufacturer datasheet describes the STM32L496xx family as supporting up to 1 MB of flash and 320 KB of SRAM. The ZET6 order code is specifically listed with 512 KB, making it important to program and validate against the correct device variant.
What is the maximum operating frequency of STM32L496ZET6?
The maximum operating frequency of the STM32L496ZET6 is 80 MHz. According to STMicroelectronics, the STM32L496xx devices use the high-performance Arm Cortex-M4 32-bit RISC core and can operate at frequencies up to 80 MHz. Clock selection, voltage scaling, and flash wait-state requirements must be configured for the operating conditions specified in the manufacturer clock-control guidance.
Does STM32L496ZET6 support USB and audio?
Yes, the STM32L496ZET6 supports USB OTG FS and includes audio capability. The manufacturer datasheet listing identifies USB OTG FS and audio among the STM32L496xx family features. For a USB implementation, follow the dedicated USB data-pair routing and impedance guidance; for audio, verify the selected codec interface, clocking, and signal paths in the device pin-description and reference-manual tables.
Where can I download the STM32L496ZET6 datasheet PDF?
The STM32L496ZET6 datasheet PDF can be downloaded from the official STMicroelectronics document linked on this page. The manufacturer datasheet is titled for the STM32L496xx family and covers the Cortex-M4 MCU, FPU, memory, USB OTG FS, audio, HASH, and external SMPS features. Use the pin-description and electrical-characteristics sections for the exact ZET6 ordering information.
Where can I find the STM32L496ZET6 pinout?
The STM32L496ZET6 pinout is found in the pin-description section of the manufacturer STM32L496xx datasheet and package information. The device uses a 144-pin LQFP package with a 20 x 20 mm body. Use the manufacturer pinout when assigning power, ground, analog, debug, USB, communication, and timer signals because alternate-function multiplexing and package-specific assignments must be followed exactly.
Is STM32L496ZET6 suitable for industrial and low-power embedded systems?
The STM32L496ZET6 is suitable for many industrial and low-power embedded systems because it combines 80 MHz processing, 320 KB of SRAM, USB OTG FS, and ultra-low-power design goals in one 144-LQFP device. It can support control loops, protocol handling, data buffering, and USB connectivity. Final suitability still depends on the required peripheral mix, temperature grade, EMC limits, and power-budget targets.
STM32L496ZET6 vs STM32L496ZET6TR - which version should I choose?
STM32L496ZET6 and STM32L496ZET6TR identify ordering and packaging variants of the same STM32L496ZE microcontroller family. The verified listing describes STM32L496ZET6 in a 144-LQFP 20 x 20 mm package, while the STM32L496ZET6TR listing also identifies 512 KB of flash and the same 80 MHz Cortex-M4 configuration. Confirm the manufacturer ordering-information table to determine the exact tape-and-reel versus tray distinction before procurement.
When should I choose STM32L496ZET6 instead of another 144-LQFP microcontroller?
Choose STM32L496ZET6 when the design benefits specifically from the STM32L496ZE feature set: an 80 MHz Cortex-M4 with FPU, 512 KB of flash, 320 KB of SRAM, USB OTG FS, and a 144-LQFP footprint. Compare the complete peripheral map and electrical limits of any candidate before replacement. A matching package alone does not establish firmware, pin-function, timing, or peripheral compatibility.
Is STM32L496ZET6 suitable for USB data acquisition equipment?
The STM32L496ZET6 is suitable for USB data acquisition equipment because it combines USB OTG FS, an 80 MHz Cortex-M4 core, 320 KB of SRAM, and 512 KB of flash. These resources can support sampling control, buffering, protocol handling, and configuration storage. The analog front end remains independent of the MCU, so sensor accuracy, reference quality, amplifier selection, and isolation determine overall measurement performance.
What is the best drop-in replacement for STM32L496ZET6?
No independently verified, pin-to-pin drop-in replacement for the STM32L496ZET6 is established by the available cross-reference results. A genuine drop-in candidate must match the 144-LQFP footprint and pin multiplexing while also meeting flash, SRAM, core, peripheral, clock, voltage, and timing requirements. Do not substitute a generic 144-LQFP microcontroller solely because its lead count matches; verify the manufacturer pinout and reference manual.
Can another microcontroller replace STM32L496ZET6 on the same PCB?
A same-PCB replacement should be selected only after confirming that every pin function, supply requirement, peripheral, clock, boot, and debug signal remains compatible. The STM32L496ZET6 uses a 144-LQFP package and includes USB OTG FS, 512 KB of flash, and 320 KB of SRAM, so package matching alone is insufficient. The available evidence does not establish a cross-manufacturer drop-in replacement, and firmware migration would normally require device-specific validation.
Where can I buy STM32L496ZET6 online?
Use the Request a Quote form on this page to request STM32L496ZET6 availability, current unit pricing, and lead time. The manufacturer lists the STM32L496ZE family as active, and multiple catalog listings identify the exact MPN, but stock levels and commercial terms can change quickly. The verified STM32L496ZET6 listing is supplied in a 144-LQFP tray configuration.
What is the price and lead time of STM32L496ZET6?
Current price, stock, and lead time for STM32L496ZET6 should be requested through the Request a Quote form on this page. The device is listed as active in the manufacturer family documentation, and catalog channels show the exact 80 MHz, 512 KB-flash, 144-LQFP device. Commercial terms can vary with quantity, package form, and delivery region, so request a current quotation for production planning.

エンジニアリング参考データ: STM32L496ZET6 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the STM32L496ZET6 when a design needs an 80 MHz Arm Cortex-M4 core with FPU, 512 KB of flash, 320 KB of SRAM, USB OTG FS, and a 144-LQFP footprint. It is particularly attractive for connected industrial controllers, USB data-acquisition equipment, portable instruments, and embedded systems requiring a broad pin complement plus audio or HASH functions. Select STM32L496ZET6TR when the manufacturer ordering table confirms that tape-and-reel handling is required for the production process. Do not choose a generic 144-LQFP MCU solely by package count: verify USB pins, alternate functions, clocking, memory, debug behavior, boot configuration, electrical limits, and firmware support. For an exact PCB replacement, no independently verified cross-manufacturer drop-in candidate is established, so a redesign or detailed pin-and-feature audit is required.

代替品との比較

パラメータ この製品
Brand STMicroelectronics
Package 144-LQFP (20 x 20 mm)
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Flash Memory 512 KB
SRAM 320 KB
USB Interface USB OTG FS
Specialized Functions Audio, HASH, and external SMPS support
Performance 100 DMIPS
Operating Supply Voltage 3.3 V

主な差別化要因

  • High processing performance within an ultra-low-power MCU family (vs Generic 144-LQFP Cortex-M microcontroller)
  • Substantial working memory for embedded buffering (vs Generic low-memory 144-LQFP microcontroller)
  • Integrated USB, audio, HASH, and external SMPS-oriented functionality (vs Generic 144-LQFP microcontroller without the same integrated feature set)

設計ノート

Use the manufacturer recommended VDD and VDDA supply network, including local high-frequency ceramic decoupling at each supply pin and bulk capacitance near the regulator output. Separate or carefully filter VDDA if the analog interface requires a quieter rail. Account for the external SMPS option only when the selected device variant and board design explicitly use it. Verify startup sequencing, brownout behavior, and regulator headroom against the electrical-characteristics limits before releasing the schematic.

Lay out the 144-LQFP footprint from the manufacturer package drawing and verify pad dimensions against the PCB assembler process. Keep switching nodes, high-current paths, and noisy analog inputs away from sensitive signal routes. Provide continuous ground-reference planes where possible, place decoupling at the associated pins, and use short return paths for clock, debug, and communication signals. Confirm courtyard, solder-mask, paste, and assembly requirements with the selected manufacturing partner.

Route the USB differential pair as a controlled-impedance, continuously referenced pair with minimal stubs and symmetry. Follow the manufacturer USB layout guidance for the device pins, connector, protection components, and nearby return path. Keep crystal and clock traces short and away from USB and switching nodes. Validate USB eye quality, clock tolerance, and signal integrity across the complete assembled board because component placement can materially affect compliance.

Do not substitute a microcontroller solely because it has 144 leads. Confirm the exact alternate-function mapping, power pins, ground pins, debug interface, boot behavior, USB routing, peripheral instances, flash size, SRAM size, and clock requirements. The STM32L496ZET6 and STM32L496ZET6TR listings describe the same core and memory configuration but require confirmation of their manufacturer ordering codes and packaging treatment before placement or procurement.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component listing identifies RoHS3 compliance. No manufacturer confirmation of REACH, halogen-free status, conflict-minerals compliance, or automotive qualification is available for this exact order code.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

STM32L496ZET6 datasheet STM32L496ZET6 datasheet pdf STM32L496ZET6 pinout STM32L496ZET6 footprint STM32L496ZET6 equivalent STM32L496ZET6 replacement STM32L496ZET6 cross reference STM32L496ZET6 price STM32L496ZET6 stock STM32L496ZET6 application circuit STMicroelectronics STM32L496ZET6 STM32L496ZET6 USB OTG FS STM32L496ZET6 144 LQFP pinout STM32L496ZET6 vs STM32L496ZET6TR

関連部品&用語

STMicroelectronics STM32L496ZET6 STM32L496ZET6TR STM32L496ZE STM32L496xx Arm Cortex-M4 Arm Cortex-M4 FPU 32-bit RISC core ultra-low-power microcontroller embedded microcontroller semiconductor 512 KB flash memory 320 KB SRAM 80 MHz 100 DMIPS USB OTG FS HASH accelerator external SMPS 144-LQFP LQFP package family surface-mount package industrial control USB data acquisition portable instrumentation embedded audio
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示