SY88813VKI - 155Mbps PECL Post Amplifier | Microchip
部品番号: SY88813VKI ✗ 生産終了SY88813VKI 概要
A limiting post amplifier is a high-speed signal-conditioning device that receives a low-amplitude digital signal, amplifies and limits it to a stable logic level, and presents that signal at a compatible output interface. The SY88813VKI belongs to the PECL interface IC hierarchy, where positive emitter-coupled logic is commonly used in optical communications, telecommunications, and high-speed network equipment. Its signal-detect feature provides an additional activity indication that can be used for loss-of-signal monitoring.
The principal operating characteristics are 155Mbps data-rate support, operation from a 3.3V or 5V supply, and low power consumption. The manufacturer description identifies single-supply or 5V operation at 155Mbps, low-noise PECL data outputs, chatter-free PECL signal detect, and a TTL-compatible enable input. These features allow the amplifier to serve as the final receiver-side conditioning stage between an optical or copper receive channel and downstream digital circuitry.
The SY88813VKI is intended for optical-network and telecommunications equipment operating with PECL signals. Typical uses include SONET/SDH-class optical interfaces, 155Mbps line-rate receivers, high-speed backplane signal conditioning, and systems requiring a dedicated loss-of-signal indication. Because this is a communications interface IC rather than a power semiconductor, safe-operating-area data is not applicable.
Board implementation requires careful treatment of high-speed transmission lines and supply-return paths. The manufacturer datasheet should be used to assign all eight device pins, determine input and output termination requirements, and select the correct supply-decoupling arrangement. PECL output levels are referenced to the positive supply rail, so downstream devices must have compatible input thresholds and termination conventions.
This page combines the device function, package information, interface characteristics, drop-in family options, and application guidance into an engineering-focused reference. Review the manufacturer datasheet for the complete electrical limits, timing specifications, recommended application circuit, and signal-integrity layout requirements before releasing a production design.
ドロップイン代替品: SY88813VKI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
SY88813V
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
SY88813VKC
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →SY88813VKI 最大定格&電気的特性
| Product Type | PECL low-power limiting post amplifier |
| Supported Data Rate | 155 Mbps |
| Supply Voltage Options | 3.3 V or 5 V |
| Output Interface | PECL |
| Signal Detect Interface | Chatter-free PECL |
| Enable Input | TTL /EN |
| Power Consumption | Low power |
| Application | Optical networks |
| パッケージ | 10-MSOP |
| Package Pin Count | 10 pins |
| 実装タイプ | Surface mount |
| Manufacturer | Microchip Technology |
| Original Manufacturer | Micrel Semiconductor |
SY88813VKI 10 pins ピン配置ガイド
SY88813VKI (10 pins パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: SY88813VKI.
詳細は データシート をご参照ください。
主な用途
SY88813VKI の用途: 6 件s: 155Mbps Optical Receive Interfaces, Telecommunications Line Receivers, High-Speed Backplane Signal Conditioning, Clock-and-Data Recovery Front Ends, Optical Loss-of-Signal Monitoring, High-Speed Digital Test Equipment.
155Mbps Optical Receive Interfaces
The SY88813VKI fits the receive-side signal-conditioning stage of a 155Mbps optical interface because it accepts a low-level PECL input, limits the signal to a stable logic level, and provides low-noise PECL data outputs. Its 3.3V or 5V supply capability supports both conventional and compact interface designs. The chatter-free signal-detect output can report link activity to a supervisory controller, while TTL /EN allows the amplifier to be disabled during test or link maintenance. The exact input thresholds, termination values, and timing limits must follow the manufacturer application circuit.
おすすめ
Telecommunications Line Receivers
SY88813VKI can be used in a telecommunications line receiver when a recovered 155Mbps signal requires limiting and regeneration before entering a CDR or demultiplexer. Its low-power implementation is useful in line cards where multiple optical channels share limited power and board area, while the 10-MSOP package keeps the footprint compact. The PECL interface makes the device appropriate for systems already using emitter-coupled logic levels. Designers should preserve controlled-impedance routing, provide local supply bypassing, and confirm the manufacturer's recommended termination and signal-detect thresholds.
おすすめ
High-Speed Backplane Signal Conditioning
The SY88813VKI may be placed near a backplane receiver when a 155Mbps PECL signal has accumulated amplitude and timing degradation. The limiting function converts the incoming waveform into cleaner, logic-level PECL outputs, reducing sensitivity to amplitude variation at the downstream device. The integrated signal-detect function also provides a useful activity status for link diagnostics. For backplane use, short traces and uninterrupted reference planes are important because the 10-MSOP package alone does not control losses, reflections, or impedance discontinuities on the interconnect.
おすすめ
Clock-and-Data Recovery Front Ends
SY88813VKI serves as a useful input-conditioning element ahead of a clock-and-data recovery circuit when the source provides a 155Mbps PECL waveform. By limiting the signal and presenting defined PECL outputs, it can improve the consistency of the data presented to the CDR input. The TTL /EN pin allows a system controller to disable the stage during initialization, and signal detect can support loss-of-lock handling. Designers must verify the source impedance, termination network, input threshold, and propagation delay so that conditioning does not introduce an unacceptable phase or timing-budget penalty.
おすすめ
Optical Loss-of-Signal Monitoring
The chatter-free PECL signal-detect output of SY88813VKI supports receiver supervision by indicating the presence of a valid incoming signal. This can be routed to a network controller, alarm collector, or test point so that a failed optical path is distinguished from an otherwise active downstream interface. Because the detector is provided in the PECL logic family, the board must account for its supply-referenced output levels and termination. The manufacturer threshold and timing values should be used when setting system alarm delays or startup qualification windows.
おすすめ
High-Speed Digital Test Equipment
SY88813VKI can condition a 155Mbps PECL test source before it reaches a measurement instrument, logic analyzer, or protocol tester. The low-noise PECL outputs and limiting action make the device useful when the test fixture introduces attenuation or noise. Its TTL /EN input simplifies source control during automated test sequences, while signal detect can confirm that the input path is active. Instrument designers should account for the PECL common-mode range, controlled-impedance fixture construction, and probe loading when interpreting high-speed eye measurements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SY88813VKI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SY88813V | SY88813VKC |
|---|---|---|---|
| Package | 10-MSOP | 10-MSOP, subject to orderable-suffix confirmation | 10-MSOP, subject to package and pinout confirmation |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Function | PECL low-power limiting post amplifier | PECL limiting post amplifier | PECL limiting post amplifier |
| Maximum Data Rate | 155 Mbps | 155 Mbps | 155 Mbps |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| Output Interface | Low-noise PECL | PECL | PECL |
| Signal Detect | Chatter-free PECL signal detect | Chatter-free PECL signal detect | Chatter-free PECL signal detect |
| Enable Input | TTL /EN | TTL /EN | TTL /EN |
| Power Class | Low power | Low power | Low power |
| Application | Optical networks | High-speed communications | High-speed communications |
主な差別化要因
- Integrated chatter-free signal detection (vs SY88813V)
- TTL-compatible enable control (vs SY88813VKC)
- Dual supply-voltage flexibility (vs SY88813V)
設計ノート
Route the PECL input and outputs on controlled-impedance traces with continuous reference planes, and keep the receive path short between the external connector, termination network, and SY88813VKI. PECL output levels are referenced to the positive supply rail, so downstream threshold margins depend on the actual supply voltage. Use the manufacturer's application diagram for resistor values and avoid adding long breakout stubs that can degrade the 155Mbps edge rate.
Place the supply bypass capacitor close to the device's supply and ground pins, and provide a low-impedance return path for high-frequency currents. Decouple the 3.3V or 5V rail locally rather than relying only on a distant bulk capacitor. Because PECL signal levels move with the positive supply, supply noise can affect output common mode and the receiver's decision margin. Keep switching regulators and their high-current paths physically separated from the input and output routing.
Do not substitute the 8-pin SY88813VKC assembly solely because its family description matches the SY88813VKI. The indexed electrical document identifies SY88813VKC as an 8-pin variant, whereas SY88813VKI is a 10-MSOP device. Verify every power, ground, input, output, enable, and signal-detect connection against the package-specific pin table before using any family member as a physical replacement.
Treat the signal-detect output as a PECL output rather than a TTL-compatible status signal. Its voltage levels are referenced to the positive supply, and the threshold and response timing must satisfy the system-level loss-of-signal timing budget. Confirm the enable polarity and inactive output state in the manufacturer datasheet before defining system startup and fault-handling behavior.
コンプライアンス情報
No specific compliance declaration for the exact SY88813VKI ordering code was identified. Obtain the current manufacturer material declaration before using the device in a regulated production design.