SY89831UMI - 1:4 LVPECL 2 GHz Clock Buffer | Microchip
部品番号: SY89831UMI ✗ 生産終了SY89831UMI 概要
A fanout buffer is a clock and timing IC that receives one differential clock and reproduces it at multiple outputs. Clock translators and fanout buffers belong to the clock and timing IC hierarchy, where they support clock generation, distribution, and interface conversion inside communication, industrial, networking, and test equipment. The SY89831UMI combines distribution and level translation in one device, reducing the number of separate clock components required when several LVPECL loads must be driven.
The headline features are a 1:4 fanout ratio, 2 GHz maximum listed frequency, LVPECL outputs, support for CML, LVDS, and LVPECL inputs, and internal input termination. The internal termination is useful in systems where the incoming clock line requires a defined termination close to the input. A 16-VFQFN package also offers a compact land pattern, while the exposed thermal pad provides a dedicated route for heat removal when the device operates at elevated frequency or drives demanding loads.
This clock IC is intended for systems that distribute a common high-speed differential clock to multiple logic domains. Its translator function allows a differential source using CML, LVDS, or LVPECL signaling to feed an LVPECL-based clock network. The four outputs can support parallel clock branches when the downstream circuits require matching edge rates and amplitude levels. Exact input thresholds, output amplitude, output jitter, skew, supply range, and propagation-delay limits should be confirmed in the manufacturer datasheet before release.
Typical applications include network-interface clock distribution, serializer and deserializer clock trees, telecommunications line-card timing, instrumentation, and industrial control systems. The part is especially relevant where one incoming differential clock must feed four LVPECL-capable loads while maintaining a compact board footprint. A new design must also account for transmission-line impedance, connector or package losses, return paths, and the clock receiver's allowable input capacitance.
For layout, place the device close to the clock source and the intended loads, use a continuous reference plane, and keep differential traces tightly coupled with matched lengths. Reserve the exposed-pad lands according to the manufacturer's land-pattern guidance and provide a low-impedance thermal and ground connection. Validate the complete clock path for ringing, crosstalk, and power-supply coupling using the final PCB stack-up and termination arrangement.
This page combines the device identity, clock-function hierarchy, practical PCB guidance, verified technical attributes, and a qualification-oriented comparison framework. Its purpose is to help engineers narrow the part efficiently while keeping final timing, compliance, lifecycle, and sourcing decisions tied to authoritative Microchip documentation and the Request a Quote process.
ドロップイン代替品: SY89831UMI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSY89831UMI 仕様
| Device Type | Fanout buffer and translator |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 2 GHz |
| Input Logic Levels | CML, LVDS, or LVPECL differential input |
| Output Logic Level | LVPECL |
| 出力数 | 4 outputs |
| Internal Termination | Internal input termination |
| パッケージ | 16-VFQFN with exposed pad |
| 実装タイプ | Surface mount |
SY89831UMI 16-vfqfn with exposed pad ピン配置ガイド
SY89831UMI (16-vfqfn with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SY89831UMI.
詳細は データシート をご参照ください。
主な用途
SY89831UMI の用途: 6 件s: Network Interface Clock Distribution, Serializer and Deserializer Clock Trees, Telecommunications Line-Card Timing, Industrial Control and Instrumentation, Test and Measurement Equipment, Data Converter and Digital Backplane Clocking.
Network Interface Clock Distribution
The SY89831UMI fits network-interface clock trees that require one differential source to feed several LVPECL destinations. Its 1:4 fanout ratio provides four clock branches, while translation from differential CML, LVDS, or LVPECL input gives the design flexibility to interface with different clock-producing blocks. With a maximum listed frequency of 2 GHz, the device is suited to high-speed digital subsystems, although the final link rate must remain below the complete clock-path limit. Keep traces short, preserve controlled impedance, and validate each receiver’s loading and termination requirements.
おすすめ
Serializer and Deserializer Clock Trees
A serializer or deserializer often requires several local clock branches derived from one reference signal. The SY89831UMI provides four LVPECL outputs from a differential input, allowing a common source clock to feed parallel interface lanes without adding separate output-driver stages. The 16-VFQFN package keeps the implementation compact, and internal input termination helps define the incoming line impedance when correctly configured. Engineers should compare output jitter, skew, propagation delay, and amplitude against the receiving blocks, then confirm these parameters from the manufacturer datasheet before sign-off.
おすすめ
Telecommunications Line-Card Timing
The SY89831UMI can distribute a common differential clock across a telecommunications line card when several timing-consuming sections require LVPECL-compatible clocks. Its 1:4 ratio reduces the number of separate distribution stages, while input translation allows the source clock interface to be selected according to the surrounding CML, LVDS, or LVPECL circuitry. The listed 2 GHz maximum supports demanding digital timing networks, but system margin depends on trace loss, connector behavior, supply noise, and receiver thresholds. Validate the complete timing budget across temperature and power-supply variation.
おすすめ
Industrial Control and Instrumentation
Industrial controllers and measurement instruments often need multiple synchronized LVPECL clocks derived from one stable source. The SY89831UMI places four translated outputs in a compact 16-VFQFN package, which can simplify partitioning across acquisition, processing, and communication sections. Its internal input termination supports controlled clock-line behavior, provided the source and termination arrangement match the manufacturer guidance. Layout should isolate sensitive routes from noisy power converters and motors, maintain continuous return paths, and be checked with an oscilloscope for edge-rate degradation and reflections.
おすすめ
Test and Measurement Equipment
In test and measurement equipment, one reference clock may need to reach several acquisition, conversion, or triggering circuits with compatible logic levels. The SY89831UMI translates a differential CML, LVDS, or LVPECL source into four LVPECL outputs, helping designers create a compact distribution tree without multiple translator and fanout blocks. The listed 2 GHz ceiling supports high-speed instrumentation while the 16-VFQFN package preserves board area. Confirm the output jitter, skew, and deterministic latency limits in the manufacturer datasheet, and use matched impedance for the complete source-to-load path.
おすすめ
Data Converter and Digital Backplane Clocking
The SY89831UMI is appropriate when a backplane or data-converter subsystem derives several LVPECL clock branches from a common differential source. Translation and fanout are combined in one package, reducing routing between separate level-conversion and distribution stages. Four outputs can feed compatible parallel loads when the design preserves controlled impedance and adequate return paths. The main trade-off is that every branch must satisfy the device’s output-loading and timing limits. Check voltage thresholds, edge rate, jitter, skew, and propagation delay against each receiver before committing the clock-tree topology.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SY89831UMI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
Do not choose it merely because another device uses a similar VQFN outline. A valid replacement must preserve pin assignment, input compatibility, termination behavior, output standard, fanout function, and exposed-pad requirements. SY89831UMG is a closely related family ordering code, while SY89832-family devices may change the fanout ratio and therefore the usable output configuration. Both require order-code and datasheet review rather than an assumption of equivalence. If the system needs non-LVPECL outputs, more than four branches, or a different supply arrangement, evaluate a device explicitly designed for those requirements.
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Microchip Technology |
| Package | 16-VFQFN with exposed pad |
| Device Type | Fanout buffer and translator |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 2 GHz |
| Input Logic Levels | CML, LVDS, or LVPECL differential input |
| Output Logic Level | LVPECL |
| Output Count | 4 outputs |
| Internal Termination | Internal input termination |
| Mounting Type | Surface mount |
設計ノート
Route the differential clock input and all LVPECL outputs over a continuous reference plane with tightly coupled traces. Keep the SY89831UMI near the source and load branches to minimize loss and improve return-path continuity. Set trace impedance from the completed PCB stack-up, avoid stubs, and route clock lines away from switching nodes and high-current paths.
Do not assume that CML, LVDS, and LVPECL inputs can be driven by the same source without checking amplitude and common-mode conditions. Use the input-condition table and reference circuit in the manufacturer datasheet to select source termination. An incorrect termination arrangement can degrade edge rate, alter jitter, or prevent the translator from recognizing the input reliably.
Connect the 16-VFQFN exposed pad to the required ground and thermal land pattern using the manufacturer layout guidance. Preserve uninterrupted connection to the ground plane, inspect the assembly for voiding where heat transfer matters, and avoid placing the device beside a concentrated heat source. The exposed pad is a thermal and electrical feature and should not be treated as an optional copper area.
Validate the final clock path with an oscilloscope using a low-capacitance probing method. Check source amplitude, differential edge rate, ringing, output skew, and clock-to-clock jitter while the board is operating. Printed results can change with connector launch, receiver loading, layer transitions, and neighboring circuitry, so schematic-only or simulation-only verification is not sufficient.
コンプライアンス情報
The product listing links a comparison that references RoHS and REACH, but the corresponding compliance declarations are not reproduced. Treat each compliance field as unknown until confirmed in the manufacturer product documentation or declaration.