T1020NSE7MQB - QorIQ T1 2-Core 1.4GHz e5500 SoC | NXP
部品番号: T1020NSE7MQB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $123.83 | $123.83 |
| 10 | $118.5 | $1,185.00 |
| 100 | $105.2 | $10,520.00 |
| 500 | $96.4 | $48,200.00 |
| 1,000 | $88.75 | $88,750.00 |
T1020NSE7MQB 概要
What is a QorIQ communications processor? QorIQ is a NXP processor family targeting networking, telecom, and industrial infrastructure. The T1 series sits at the lower-power dual-core end of the QorIQ T lineup, positioned between the single-core T1014 and the quad-core T1040/T2080 tier. These SoCs combine general-purpose Power Architecture cores with hardware assist engines (SEC for crypto, DPAA for packet parsing/queueing, and integrated Ethernet MACs/switch), enabling line-rate L2-L4 processing without external lookup engines. They belong to the broader communications processor hierarchy: SoC -> microprocessor -> communications processor -> embedded processor.
Key features of the T1020NSE7MQB include dual 64-bit e5500 cores with hardware hypervisor support, integrated 32-bit DDR3L/DDR4 memory controller with ECC, integrated 1G/2.5G Ethernet switch fabric, SEC 4.0 crypto accelerator, DPAA for parsing/classification/queueing, two PCIe Gen2 controllers, and four SerDes lanes for SGMII/XAUI. Operating temperature range is 0C to 105C, targeting industrial and extended-temperature networking equipment. The 780-FCBGA package supports the high-speed SerDes and memory interfaces required for multi-gigabit switching.
Architecturally, the T1020 uses the e5500 core, a 64-bit superscalar Power Architecture implementation with out-of-order execution, integrated MMU, and hardware virtualization (hypervisor) extensions. The DPAA subsystem offloads frame parsing, classification, and queue management to dedicated engines, freeing the e5500 cores for control-plane and application-layer processing. SEC 4.0 accelerates AES, 3DES, SHA, RSA, and ECC, supporting IPSec, TLS/DTLS, and MACsec at line rate. The integrated Ethernet switch eliminates an external PHY/bridging device in small-port-count designs.
Typical applications include industrial Ethernet switches (managed 8-24 port switches), factory automation gateways, IEC 61850-3 substation controllers, edge routers, and ruggedized industrial control platforms where 1-2 cores are sufficient for control-plane and protocol conversion but packet-plane needs hardware assist. The 0-105C temperature range allows deployment in outdoor enclosures and industrial cabinets.
For design planning: plan the PCB for 23x23 mm FCBGA with microvia stack-up; provide at least 4 PCB layers with dedicated ground references for SerDes lanes; allocate thermal copper under the package to dissipate the typical 8-12W TDP at 1.4 GHz; and validate DDR3L/DDR4 topology against the NXP reference design guidelines for signal-integrity.
This page synthesizes distributor pricing, drop-in QorIQ alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: T1020NSE7MQB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
T1022NSE7MQB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
T1042NSN7MQB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
T1020NSE7PQB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
T1014NSE7MQB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
T1024NSE7MQB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
T1020NSE7MQB 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ T1 |
| Core Architecture | Power Architecture e5500, 64-bit |
| Number of Cores | 2 |
| Maximum Core Frequency | 1.4 GHz |
| Memory Controller | DDR3L / DDR4 with ECC |
| Hardware Crypto Accelerator | SEC 4.0 (AES, 3DES, SHA, RSA, ECC) |
| Integrated Ethernet Switch | Yes |
| DPAA | Yes (Data Path Acceleration Architecture) |
| PCIe | 2 x PCIe Gen2 |
| SerDes Lanes | 4 lanes (SGMII/XAUI) |
| パッケージ | 780-FCBGA (23x23 mm) |
| 動作温度 | 0C to +105C |
| 実装タイプ | Surface Mount (BGA) |
| RoHS | Compliant |
| Process Node | 0.028 um (45 nm SOI, per Utmel) |
T1020NSE7MQB ピン構成
| ピン BALL | FCBGA grid — 780-FCBGA pin grid with SerDes, DDR, Ethernet, PCIe, and GPIO balls; full pin map per NXP datasheet |
主な用途
T1020NSE7MQB の用途: 6 件s: Managed Industrial Ethernet Switches, IEC 61850-3 Substation Controllers, Edge Routers and Industrial Gateways, Ruggedized Industrial Control Platforms, Network-Attached Storage (NAS) Appliances, Smart Grid Aggregation Switches.
Managed Industrial Ethernet Switches
The T1020NSE7MQB's integrated Ethernet switch fabric and DPAA offload make it well-suited for 8 to 24 port managed industrial Ethernet switches. It eliminates external PHY/switch ASICs by integrating multiple MACs and queue managers, and the SEC 4.0 accelerator supports MACsec line-rate encryption for secure automation networks. The 0-105C operating temperature enables deployment in factory floors, substation cabinets, and outdoor enclosures where commercial-grade CPUs cannot survive. Reference design: NXP T1020 + external Marvell/TI PHYs for 24-port managed switch running Linux with netfilter/iptables bridging.
おすすめ
IEC 61850-3 Substation Controllers
The T1020NSE7MQB's extended 0-105C temperature range and 780-FCBGA rugged package suit IEC 61850-3 substation communication controllers for power-grid automation. Dual e5500 cores run redundancy protocols (PRP, HSR) while the DPAA handles layer-2 switching of GOOSE/Sampled-Values messages with hardware timestamping. SEC 4.0 enables secure substation authentication via IEEE 802.1X and MACsec over Ethernet. The hardware hypervisor in each e5500 core supports running both a real-time protection OS and a Linux management stack on the same die.
おすすめ
Edge Routers and Industrial Gateways
Placed between field-level IO and SCADA systems, the T1020NSE7MQB operates as an industrial edge router or protocol-conversion gateway. The two e5500 cores handle Modbus TCP, EtherNet/IP, PROFINET, and OPC-UA routing while the SEC accelerator secures northbound MQTT/HTTPS traffic. The integrated 1G Ethernet switch fabric simplifies wiring into a single BOM, and the DDR3L/DDR4 ECC memory controller with reliability features supports 24/7 unattended operation. Reference design: NXP T1020 SDK + OpenWrt/QSDK with VPN termination.
おすすめ
Ruggedized Industrial Control Platforms
The T1020NSE7MQB powers DIN-rail industrial control platforms combining PLC, motion, and HMI functionality on a single SoC. Dual e5500 cores run one core for soft-PLC (CODESYS or IEC 61131-3 runtime) and the other for motion control and visualization, with the DPAA managing real-time Ethernet protocols (PROFINET IRT, EtherCAT). The 0-105C junction rating supports cabinet-mounted installations near motors and VFDs. The FCBGA package, when paired with an adequate thermal copper plane, sustains the 8-12W TDP typical at 1.4 GHz operation.
おすすめ
Network-Attached Storage (NAS) Appliances
Although primarily a communications processor, the T1020NSE7MQB fits small-form-factor NAS controllers thanks to its DDR3L/DDR4 ECC memory controller and PCIe Gen2 for storage controllers. Dual e5500 cores run a NAS OS (FreeNAS, OpenMediaVault) with software RAID, while the SEC accelerator offloads SMB3/AES-CCMP encryption. The integrated Ethernet ports handle 1G connectivity without additional NICs. The 0-105C temperature range supports SOHO/edge deployments where commercial NAS SoCs thermally throttle.
おすすめ
Smart Grid Aggregation Switches
Utility-grade smart-grid aggregation switches leverage the T1020NSE7MQB's MACsec line-rate encryption and DPAA packet classification to backhaul AMI traffic from substations to control centers. The hardware crypto accelerator secures DLMS/COSEM and IEEE 1588 timing traffic, while e5500 cores run routing protocols (RIPv2, OSPFv3, BGP) for telemetry backhaul. The 780-FCBGA package with thermal copper withstands 70C ambient in outdoor cabinets without active cooling, and ECC memory detects radiation-induced soft errors in elevated-altitude installations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: T1020NSE7MQB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | T1022NSE7MQB | T1042NSN7MQB | T1020NSE7PQB | T1014NSE7MQB | T1024NSE7MQB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same |
| Core Architecture | e5500 64-bit | e5500 64-bit | e5500 64-bit | e5500 64-bit | e5500 64-bit | e5500 64-bit |
| Number of Cores | 2 | 2 | 4 | 2 | 1 | 2 |
| Maximum Frequency | 1.4 GHz | 1.4 GHz | 1.4 GHz | 1.2 GHz | 1.4 GHz | 1.4 GHz |
| Memory Controller | DDR3L / DDR4 ECC | DDR3L / DDR4 ECC | DDR3L / DDR4 ECC | DDR3L / DDR4 ECC | DDR3L / DDR4 ECC | DDR3L / DDR4 ECC |
| Integrated Ethernet Switch | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C |
主な差別化要因
- Integrated Ethernet switch eliminates external PHY/bridge IC （vs T1014NSE7MQB)
- Dual-core e5500 with hardware virtualization （vs T1022NSE7MQB)
- 1.4 GHz speed grade (vs 1.2 GHz PQB grade) （vs T1020NSE7PQB)
設計ノート
Estimated: 780-FCBGA at 1.0 mm pitch requires a high-density PCB stack-up with laser-drilled microvias and at least 4 routing layers plus dedicated ground planes. Reference NXP AN4765 layout guidelines for ball escape and BGA break-out via stitching. Decoupling: place 0402 ceramic caps within 2 mm of each power ball pair, with a 47 uF bulk capacitor per rail (CVDD, GVDD, DVDD, OVDD, XVDD).
Estimated: At 1.4 GHz with full DPAA load, the T1020NSE7MQB dissipates approximately 8-12W TDP. With FCBGA theta_JA typically in the 8-12 C/W range (with adequate thermal copper spreader), junction-to-ambient rise is 64-144C at still air, so a heatsink is mandatory for enclosed industrial cabinets. Place thermal vias on the BGA center grid per NXP reference design.
Route SerDes lanes (SGMII/XAUI, PCIe) with controlled-impedance 85 ohm differential microstrips or stripline over a continuous reference ground plane. Keep lane-to-lane skew below 5 ps for XAUI 3.125 Gbps operation. Validate against NXP's T1020 hardware specification SerDes channel requirements; signal-integrity compliance is essential for reliable boot.
Do not use non-ECC memory modules with the T1020NSE7MQB in industrial designs - the DDR controller requires ECC to detect single-bit errors common in elevated-altitude and high-temperature operation. Also confirm the boot ROM configuration resistors (RCW) match your SerDes protocol before reflow; incorrect RCW causes silent boot failure requiring reballing.
コンプライアンス情報
RoHS compliant per NXP product page. The T1020NSE7MQB is an industrial-grade part (0-105C), not AEC-Q100 automotive qualified. Not halogen-free status verified from web data.
