TMC6460ATU+T - 36V/3A Smart FOC BLDC Servo Driver IC | ADI Trinamic
部品番号: TMC6460ATU+T ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.42 | $18.42 |
| 10 | $16.95 | $169.50 |
| 100 | $14.78 | $1,478.00 |
| 500 | $12.94 | $6,470.00 |
| 1,000 | $11.5 | $11,500.00 |
TMC6460ATU+T 概要
What is a smart servo driver IC? A smart servo driver is a highly-integrated motor control IC that combines the microcontroller/MCU-style control law (often an FOC computation engine), gate drivers, power MOSFETs, current shunts/amplifiers, and encoder feedback peripherals on a single die. Within the power-management hierarchy for motion systems, it sits between the discrete MCU + gate-driver + external FET stack (lower integration, more design effort) and a full industrial servo drive module (higher integration, less design flexibility). The TMC6460 collapses that stack into one package, letting engineers implement torque- and velocity-controlled BLDC/PMSM servos without writing low-level commutation code.
Key differentiating features include hardware-accelerated FOC computation, integrated NMOS power stage with on-chip current sense, support for absolute encoders (BiSS-C, SSI, Tamagawa T-format via firmware load), an integrated I/O controller that can host custom encoder protocol firmware, multiturn 32-bit position counter, and communication interfaces including SPI, I2C, and UART. The device is designed for the ADI Trinamic TMCL ecosystem, simplifying firmware development and evaluation via the TMC6460-EVKIT.
Typical applications are three-phase BLDC and PMSM servo drives up to ~100 W mechanical output, robotic joint actuators, gimbals and drone propulsion, medical pumps and infusion devices, e-mobility hubs, and small-format CNC or 3D-printer spindles. The exposed-pad TQFN-38 (5x7 mm) package enables direct PCB thermal dissipation. Designers targeting firmware reuse across platforms benefit from the integrated I/O controller, which lets additional encoder protocols be added by uploading a custom program rather than redesigning hardware.
When designing in the TMC6460, observe the 36 V absolute maximum supply rating and provide sufficient bulk capacitance on VMOT to absorb regen energy. Mount the exposed pad onto a copper pour of at least 1 square inch to keep junction temperatures within ratings at full 3 A phase current. Because most of the FOC loop runs in hardware, firmware development is dramatically simpler than a discrete MCU + gate-driver solution, but the part is not a general-purpose micro - it cannot replace an application processor in the system.
ドロップイン代替品: TMC6460ATU+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMC6460ATU+T （同一形状・フットプリント） — 相違点: Control Algorithm, Package, Current Sensing, Evaluation Kit, Motor Type.
クイック比較ツール — 並列比較する代替部品を選択:
TMC6460ATU+
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMC6460ATU+TTR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TMC6460ATU+T 最大定格＆電気的特性
| Motor Type | BLDC / PMSM (3-phase) |
| Control Algorithm | Field-Oriented Control (FOC), hardware-accelerated |
| Supply Voltage (VMOT max) | 36 V |
| Continuous Phase Current | 3 A RMS |
| Power Stage | Integrated NMOS |
| Current Sensing | On-chip |
| Communication Interfaces | SPI, I2C, UART |
| Encoder Support | Incremental, absolute; BiSS-C, SSI, Tamagawa via firmware load |
| Position Counter | 32-bit multiturn |
| Integrated I/O Controller | Yes (custom encoder protocol upload) |
| パッケージ | 38-TQFN exposed pad, 5x7 mm |
| 実装タイプ | Surface Mount |
| Configuration | PCB Mount |
| RoHS ステータス | Compliant |
| Evaluation Kit | TMC6460-EVKIT (TMC6460-EVAL + Landungsbruecke + Eselsbruecke) |
TMC6460ATU+T ピン構成
| ピン 1 | VMOT — Motor power supply (up to 36 V) |
| ピン 2 | GND — Ground |
| ピン 3 | U — Phase U output to motor |
| ピン 4 | V — Phase V output to motor |
| ピン 5 | W — Phase W output to motor |
| ピン 6 | SCLK — SPI clock |
| ピン 7 | SDI — SPI data in / MOSI |
| ピン 8 | SDO — SPI data out / MISO |
| ピン 9 | CSN — SPI chip select (active low) |
| ピン 10 | SCL — I2C clock |
| ピン 11 | SDA — I2C data |
| ピン 12 | TX — UART transmit |
| ピン 13 | RX — UART receive |
| ピン 14 | ENC_A — Encoder A input |
| ピン 15 | ENC_B — Encoder B input |
| ピン 16 | ENC_N — Encoder index / Z |
| ピン 17 | HALL_U — Hall sensor U input |
| ピン 18 | HALL_V — Hall sensor V input |
| ピン 19 | HALL_W — Hall sensor W input |
| ピン 20 | GPIO0 — General-purpose I/O |
| ピン 21 | GPIO1 — General-purpose I/O |
| ピン 22 | GPIO2 — General-purpose I/O |
| ピン 23 | GPIO3 — General-purpose I/O |
| ピン 24 | DRV_EN — Driver enable (active high) |
| ピン 25 | FAULT — Fault output (active low, open drain) |
| ピン 26 | RESET — Reset input (active low) |
| ピン 27 | INT — Interrupt output |
| ピン 28 | VDD — Logic supply (3.3 V) |
| ピン 29 | VDDIO — I/O supply reference |
| ピン 30 | GND — Ground |
| ピン 31 | NC — Not connected (per datasheet) |
| ピン 32 | NC — Not connected (per datasheet) |
| ピン 33 | NC — Not connected (per datasheet) |
| ピン 34 | NC — Not connected (per datasheet) |
| ピン 35 | NC — Not connected (per datasheet) |
| ピン 36 | NC — Not connected (per datasheet) |
| ピン 37 | NC — Not connected (per datasheet) |
| ピン 38 | NC — Not connected (per datasheet) |
| ピン 39 | EP — Exposed thermal pad - tie to GND copper pour |
主な用途
TMC6460ATU+T の用途: 7 件s: BLDC / PMSM Servo Drives, Robotic Joint Actuators, Drone and Gimbal Propulsion, Medical Pumps and Infusion Devices, E-Mobility Hubs and Small EVs, Compact CNC Spindles and 3D Printer Extruders, Industrial Servo and Automation.
BLDC / PMSM Servo Drives
The TMC6460ATU+T is purpose-built for three-phase BLDC and PMSM servo drives up to ~100 W mechanical output. Its hardware-accelerated FOC engine, integrated 36 V / 3 A NMOS power stage, and on-chip current sense allow a complete torque/velocity/position control loop without an external DSP or FPGA. Engineers typically place the TMC6460ATU+T on a 4-layer PCB with a 1 sq-inch copper pour tied to the exposed thermal pad; bulk capacitance on VMOT absorbs regen energy. The integrated I/O controller lets absolute encoder protocols (BiSS-C, Tamagawa) be added by firmware upload, eliminating a discrete encoder decoder IC.
おすすめ
Robotic Joint Actuators
Robotic arm joints, cobot actuators, and humanoid robot drives benefit from the TMC6460ATU+T's 32-bit multiturn position counter, absolute encoder support, and compact 5x7 mm TQFN footprint. The hardware FOC computes torque loops in real time, freeing the host MCU to manage trajectory planning and safety logic. With 3 A RMS phase current, the part covers most sub-100 W frameless and hobby servo motors used in 6-7 DOF robotic arms. Built-in SPI/UART host interfaces make it easy to integrate into ROS-based or proprietary robot control stacks.
おすすめ
Drone and Gimbal Propulsion
Drones, camera gimbals, and handheld stabilizers use small three-phase BLDC motors in the 24 V / sub-3 A class - exactly the TMC6460ATU+T's sweet spot. Its hardware-accelerated FOC enables smooth low-speed torque control for cinematic gimbals, while high-speed commutation is accurate enough for multirotor ESC operation. The exposed-pad TQFN package keeps the PCB small and lightweight, critical for airframes. With on-chip current sensing, telemetry data can be streamed back to the flight controller via the SPI/UART host interface for closed-loop throttle response.
おすすめ
Medical Pumps and Infusion Devices
Medical infusion pumps, dialysis machines, and laboratory peristaltic pumps demand precise low-flow BLDC control with full traceability. The TMC6460ATU+T's 32-bit multiturn position counter and absolute encoder support provide closed-loop dosing accuracy, while its hardware FOC ensures smooth torque ramps that avoid the pulsation artifacts of open-loop stepper or trapezoidal BLDC commutation. The 36 V / 3 A envelope covers most small medical pumps, and the integrated current sense enables stall detection - critical for safety in patient-connected devices.
おすすめ
E-Mobility Hubs and Small EVs
E-bike hub motors, e-scooter wheels, and small AGV/AMR drive wheels use BLDC or PMSM motors in the 24-36 V / sub-3 A class that the TMC6460ATU+T can drive directly. The integrated FOC provides efficient torque per ampere, while regenerative braking energy can be absorbed by bulk capacitance on VMOT (subject to the 36 V supply cap). Field-oriented control also produces smoother low-speed torque for traction and braking, important for rider safety and energy efficiency. Multiple TMC6460ATU+T devices can be multiplexed on a single SPI bus for multi-axis AGVs.
おすすめ
Compact CNC Spindles and 3D Printer Extruders
Small CNC spindles, 3D printer extruders, and pick-and-place tool drives benefit from the TMC6460ATU+T's quiet FOC operation and precise velocity control. Unlike open-loop stepper drivers, closed-loop FOC via the TMC6460 eliminates missed steps at high acceleration and produces lower acoustic noise - critical for desktop and laboratory equipment. With on-chip current sense and absolute encoder support, the part enables closed-loop extrusion control for high-resolution 3D printing. The 38-TQFN (5x7 mm) footprint is compact enough for integration on a typical motion-control daughterboard.
おすすめ
Industrial Servo and Automation
Industrial servo drives, packaging machinery, conveyor diverters, and textile automation require reliable three-phase motor control with deterministic latency. The TMC6460ATU+T's hardware FOC engine executes the torque loop in deterministic cycles, while the integrated I/O controller can host custom encoder protocols for legacy or proprietary feedback devices. The 36 V / 3 A envelope is suitable for small servo drives, with multiple units networked on SPI for multi-axis machines. Industrial compliance is supported via the part's RoHS-compliant, lead-free, surface-mount TQFN package suitable for reflow production.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMC6460ATU+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMC6460ATU+ | TMC6460ATU+TTR |
|---|---|---|---|
| Package | 38-TQFN (5x7 mm) exposed pad | 38-TQFN (5x7 mm) exposed pad - same | 38-TQFN (5x7 mm) exposed pad - same |
| Brand | Analog Devices (formerly Trinamic / Maxim Integrated) | Analog Devices - same | Analog Devices - same |
| Supply Voltage (max) | 36 V | 36 V | 36 V |
| Continuous Phase Current | 3 A RMS | 3 A RMS | 3 A RMS |
| Control Algorithm | Hardware FOC | Hardware FOC | Hardware FOC |
| Host Interfaces | SPI / I2C / UART | SPI / I2C / UART | SPI / I2C / UART |
| Packaging Form | Tape & Reel (7-inch) | Tray | Tape & Reel (13-inch) |
| Pin-out Compatibility | Reference | 100% identical | 100% identical |
| Unit Price (qty 1, as of 2026-10-05) | $18.42 | $18.42 (typical) | Call for quote |
主な差別化要因
- Fully-integrated FOC + power stage + current sense in one IC （vs Discrete MCU + gate-driver + FET stack)
- Programmable I/O controller for custom encoder protocols （vs Discrete encoder decoder ICs)
- 32-bit multiturn position counter integrated （vs External position counter / host MCU counting)
設計ノート
At VMOT=24 V, VOUT_phase=12 V line-neutral, and 3 A RMS continuous phase current, the TMC6460ATU+T dissipates power in the integrated NMOS output stage proportional to RDS(on) x I^2 and switching losses. Per the datasheet thermal guidance, the 38-TQFN exposed pad should be soldered to a copper pour of at least 1 square inch (4-layer board with 2 oz outer copper recommended). Without adequate thermal design, sustained 3 A operation will engage the on-chip thermal shutdown circuit and degrade long-term reliability.
Place bulk motor supply capacitance (low-ESR electrolytic or polymer, typically 47-220 uF / 50 V) within 25 mm of the VMOT pin to absorb regen current peaks. Use 100 nF + 1 uF ceramic bypass close to VDD and VDDIO logic supply pins. The three-phase outputs U/V/W should be routed as a symmetric three-phase group with matched trace lengths, and the exposed pad should be tied to a star-grounded GND copper pour that does NOT share a return path with high-current motor currents to avoid ground bounce into sensitive analog sense nodes.
Do not exceed the 36 V absolute maximum on VMOT - motor regen from decelerating loads can easily exceed this if bulk capacitance is undersized. Ensure SPI/UART signal levels match VDDIO logic level (typically 3.3 V) - 5 V MCUs require a level shifter. The integrated I/O controller for custom encoder protocols (BiSS-C, Tamagawa) requires firmware uploaded via the TMCL-IDE development environment - it is NOT programmable from arbitrary host MCUs.
The TMC6460ATU+T integrates high-current switching outputs with sensitive analog current-sense and encoder feedback signals on the same die. Keep SPI/I2C/UART traces short (under 50 mm) and away from the U/V/W phase traces. Place a small ferrite bead or RC filter on the VDD/VDDIO logic supply if switching noise from VMOT couples into the host MCU power rail. For BiSS-C or SSI absolute encoders, maintain 100 ohm differential termination on long cable runs to preserve signal integrity.
コンプライアンス情報
RoHS and lead-free compliance per Analog Devices product page and DigiKey listing. The TMC6460ATU+T is a motor driver / motor control IC, not an automotive-qualified part (AEC-Q100 not applicable). For automotive motor control, look at AEC-Q100 qualified ADI parts in a different family.
