TMS320BC53PQ80 - 80MHz 16-Bit Fixed-Point DSP | Texas Instruments
部品番号: TMS320BC53PQ80 ✗ 生産終了TMS320BC53PQ80 概要
A digital signal processor, or DSP, is a semiconductor optimized to execute arithmetic operations on sampled signals. Unlike a general-purpose microprocessor, a DSP commonly integrates dedicated multipliers, parallel processing resources, and a register-intensive architecture to complete filtering, correlation, Fourier-transform, and modulation algorithms efficiently. The TMS320BC53 belongs to the TMS320C5x product hierarchy, where the DSP core sits within the broader category of processors and embedded signal-processing semiconductors.
The TMS320BC53PQ80 provides an 80 MHz clock and 40 MIPS throughput while using a 5 V supply in its 5 V operating configuration. The associated family information identifies 25 ns single-cycle instruction execution for 5 V operation and 40 ns execution for 3 V operation. These figures express instruction-cycle timing and should be used together with the device’s memory architecture, external interfaces, and clock requirements when sizing an application.
The processor is identified as a fixed-point device with 16-bit RAM words and 132 terminals. Its gull-wing package and square body suit conventional surface-mount PCB assembly while exposing a substantially larger I/O count than small-package microcontrollers. The exact pin assignments, memory organization, peripheral configuration, and electrical limits should be assigned from the manufacturer’s pin-description table and datasheet rather than inferred from the package outline.
Typical uses include industrial motor control, communications-channel processing, audio and general-purpose signal processing, and embedded control systems with substantial filtering or waveform-generation workloads. An 80 MHz, 40 MIPS DSP can reduce computational overhead in time-critical signal chains, although actual throughput depends on instruction mix, memory access, and data movement. External memory and peripheral requirements should be reviewed against the complete system architecture before the device is selected.
Designers should account for clock generation, decoupling, supply sequencing, thermal performance, and the high pin count when laying out a board. The 132-pin BQFP footprint requires careful escape routing, and a dense 24.13 mm by 24.13 mm body is not ideal for compact handheld hardware. Because this processor is a legacy high-pin-count design, software maturity, long-term availability, and source-code portability are more important selection criteria than raw clock rate alone.
This page consolidates the device’s key architecture, package, sourcing, replacement, and engineering considerations into a practical selection reference. It emphasizes exact part identification, pin-compatibility requirements, application suitability, and design trade-offs so engineers can determine whether the TMS320BC53PQ80 belongs on a new design or in a targeted legacy-control upgrade.
ドロップイン代替品: TMS320BC53PQ80 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMS320BC53PQ80 (同一形状・フットプリント) — 相違点: Mounting Type, Package Type, Product Type.
TMS320LBC53SPZ80
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TMS320F206PZA
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADSP-2181BSZ-133
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSC8156SAG1000B
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TMS320BC53PQ80 仕様
| Product Type | Fixed-point digital signal processor (DSP) |
| Clock Frequency | 80 MHz |
| Instruction Throughput | 40 MIPS |
| Word Length | 16 bit |
| CPU | 16-bit TMS320C5x |
| Single-Cycle Instruction Time at 5 V | 25 ns |
| Single-Cycle Instruction Time at 3 V | 40 ns |
| 電源電圧 | 5 V |
| Internal RAM Organization | 16-bit RAM words |
| Package Type | 132-pin BQFP |
| Package Body Size | 24.13 mm x 24.13 mm |
| Terminal Count | 132 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Commercial |
| 実装タイプ | Surface mount |
TMS320BC53PQ80 square ピン配置ガイド
TMS320BC53PQ80 (square パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: TMS320BC53PQ80.
詳細は データシート をご参照ください。
主な用途
TMS320BC53PQ80 の用途: 6 件s: Industrial Motor Control, Digital Communications, Audio Signal Processing, Industrial Data Acquisition, Instrumentation and Measurement, Embedded Control System.
Industrial Motor Control
The TMS320BC53PQ80 is suitable for fixed-point motor-control loops where predictable arithmetic helps implement current sampling, proportional-integral control, pulse-width modulation, and speed estimation. Its 16-bit TMS320C5x CPU operates at 80 MHz with 40 MIPS throughput, giving designers a timing budget for deterministic control calculations. The 132-pin BQFP exposes the external memory and peripheral connections needed by larger control systems, although its 24.13 mm square body requires substantial board area. Firmware should be tested for instruction latency, interrupt jitter, and accumulator overflow before deployment in industrial equipment.
おすすめ
Digital Communications
The TMS320BC53PQ80 can support communications-channel tasks such as filtering, correlation, modulation, and spectral processing because it combines a 16-bit fixed-point CPU with 80 MHz clocking and 40 MIPS throughput. Its multiplier-oriented DSP architecture is better matched to these workloads than a general-purpose control loop. Designers should assess serial-interface timing, external memory requirements, and real-time data movement before assigning a communications protocol. Firmware architecture should separate fixed-point scaling and rounding rules to prevent loss of accuracy through successive filter stages.
おすすめ
Audio Signal Processing
The TMS320BC53PQ80 can implement real-time audio filtering, equalization, mixing, and waveform generation where a fixed-point DSP architecture is required. Its 80 MHz operating rate and 40 MIPS throughput provide the arithmetic capacity for multiple sample-rate channels, while the 16-bit word size aligns with common audio-processing resolution. The external-memory and serial-port resources available through the 132-pin package support more elaborate channel structures than a small microcontroller. Design work should account for codec timing, clock synchronization, and the latency introduced by buffering and filter delay.
おすすめ
Industrial Data Acquisition
The TMS320BC53PQ80 is applicable to acquisition systems that combine sensor sampling with real-time filtering, calibration, and digital processing. Its 80 MHz clock and 40 MIPS throughput allow the processor to execute deterministic acquisition algorithms rather than acting only as a bus controller. The large BQFP package can accommodate substantial peripheral and memory connectivity, which is useful in multi-channel systems. Engineers should define anti-alias filtering, scaling, saturation behavior, and acquisition timing before writing the control loop, and should verify converter interface compatibility against the complete pin-description table.
おすすめ
Instrumentation and Measurement
The TMS320BC53PQ80 can serve as the processing engine in instrumentation that performs continuous numerical analysis on sampled waveforms. Its fixed-point 16-bit architecture, 80 MHz operating frequency, and 40 MIPS throughput support filtering, transform-related calculations, and parameter estimation in deterministic environments. The 132-pin package provides access to external memory and parallel peripherals needed for test and measurement equipment. A practical design must establish coherent clocking, reference-voltage accuracy, calibration storage, and numerical scaling so that conversion resolution is not degraded by arithmetic or rounding errors.
おすすめ
Embedded Control System
The TMS320BC53PQ80 is appropriate for legacy embedded control products that combine a hard real-time signal-processing path with extensive external I/O. The 80 MHz TMS320C5x core provides deterministic fixed-point execution at 40 MIPS, while the 132-terminal BQFP supports the memory and peripheral count typical of feature-rich controllers. Migration planning should preserve the original peripheral partitioning, interrupt priorities, and timing margins. Because the package is large and the processor architecture is specialized, this role is strongest for maintaining or adapting an established TMS320BC53 platform rather than designing a compact new controller.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMS320BC53PQ80 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMS320LBC53SPZ80 | TMS320F206PZA | ADSP-2181BSZ-133 | MSC8156SAG1000B |
|---|---|---|---|---|---|
| Package | 132-pin BQFP (24.13 mm x 24.13 mm) | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP | 132-pin BQFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Freescale Semiconductor |
| CPU Family | 16-bit TMS320C5x | TMS320BC53/LBC53 family context | TMS320F206 | ADSP-2181 | MSC8156 |
主な差別化要因
- Established 80 MHz TMS320C5x signal-processing position (vs ADSP-2181BSZ-133)
- Direct family context for TMS320BC53 designs (vs TMS320LBC53SPZ80)
- Large 132-terminal interface package (vs TMS320F206PZA)
設計ノート
Treat the 132-terminal BQFP as a high-density routing problem rather than a conventional small QFP. Reserve a clean land pattern with the manufacturer-recommended footprint, verify the 24.13 mm body dimensions against the PCB assembly drawing, and plan fanout for memory, clock, control, and parallel peripheral signals. Escape routing should preserve the reference-design topology where available. Do not infer pin functions from signal names alone; assign each net from the family datasheet pin-description table.
Use the manufacturer’s 5 V operating scheme and its recommended decoupling network at the supply pins. Place high-frequency bypass capacitors physically close to the corresponding power terminals, with additional bulk capacitance positioned according to the reference design and measured transient requirements. Because the device has numerous terminals, inspect every supply and ground assignment in the pin table. Power-up sequencing, input voltage limits, and the 3 V versus 5 V execution conditions must be handled as separate design constraints.
Clock quality is critical because the TMS320BC53PQ80 executes at 80 MHz. Route the clock from its source over a short, continuous path, provide the prescribed return path, and keep switching signals away from the clock and sensitive analog inputs. When external memory or parallel peripherals are used, apply the timing and topology guidance from the family reference designs. Validate setup and hold margins at the processor pins with realistic load, board, connector, and temperature assumptions.
コンプライアンス情報
The product records identify a commercial temperature grade but do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.