TS555IPT - 2.7 MHz CMOS Timer, 8-TSSOP | STMicroelectronics
部品番号: TS555IPT ✓ 生産中TS555IPT 概要
A 555 timer is a programmable timer IC that can operate as a monostable one-shot or an astable oscillator. Within the broader semiconductor hierarchy, the TS555 belongs to the clock and timing IC category and can also function as a voltage comparator when configured conventionally. Its CMOS implementation reduces consumption compared with the classic bipolar NE555 while retaining pin-to-pin and functional compatibility with established 555 timer circuits.
The TS555IPT combines low power consumption, high maximum operating frequency, and reduced supply-current spikes during output transitions. Its CMOS implementation is useful in battery-powered equipment, compact control systems, signal-processing modules, and industrial electronics where supply efficiency and surface-mount packaging are important. The 8-TSSOP format also supports automated board assembly and reduces the footprint compared with larger through-hole timer packages.
Timing accuracy remains available in both monostable and astable operating modes. In monostable operation, an external trigger starts one timed output pulse whose duration is determined by resistance and capacitance. In astable operation, external timing components continuously charge and discharge an internal timing node to produce a continuous output waveform. The maximum astable frequency of 2.7 MHz makes the device suitable for substantially faster timing applications than conventional low-frequency NE555 implementations.
Typical uses include LED flashers, pulse generators, debounce circuits, industrial control timing, appliance interfaces, and compact sensor or communications modules. Because the TS555IPT supports both positive and negative trigger inputs, it can also implement Schmitt-trigger-style signal conditioning. Board designers should account for the TSSOP lead pitch and place timing, control, and bypass capacitors close to their associated pins.
When designing the circuit, verify trigger and reset pulse widths against the operating conditions in the manufacturer datasheet, and ensure the discharge-device voltage and current remain within their rated limits. A local supply bypass capacitor is recommended near the VCC and ground pins to suppress switching transients, especially in high-frequency astable operation.
This product overview combines the TS555IPT electrical characteristics, package details, functional behavior, cross-reference findings, and practical design guidance into one engineering-focused reference for timer selection, PCB implementation, and replacement evaluation.
ドロップイン代替品: TS555IPT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TS555PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TS555IPT 仕様
| Timer Type | Single programmable timer/oscillator |
| Technology | CMOS |
| Maximum Astable Frequency | 2.7 MHz |
| Typical Supply Current | 110 µA at VCC = 5 V |
| Supply Voltage Range | 2 V to 18 V |
| 動作温度範囲 | -40 °C to +125 °C |
| パッケージ | 8-pin TSSOP |
| 実装タイプ | Surface mount |
| Operating Modes | Monostable and astable |
| Functional Compatibility | Pin-to-pin and functionally compatible with bipolar NE555 |
| Supply-Current Spike Reduction | Reduced during output transitions |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Automotive AEC-Q100 Qualification | not_applicable |
TS555IPT ピン構成
| ピン 1 | GND — Ground reference |
| ピン 2 | TRIG — Trigger input for starting or resetting the timing cycle |
| ピン 3 | OUT — Timer output |
| ピン 4 | RESET — Reset input for resetting the timing cycle |
| ピン 5 | CTRL — Control-voltage input |
| ピン 6 | THRES — Threshold input for the upper timing comparison |
| ピン 7 | DISCH — Discharge output for the external timing capacitor |
| ピン 8 | VCC — Power supply input |
主な用途
TS555IPT の用途: 6 件s: LED Flashing and Indicator Circuits, Pulse Generators and Delay Circuits, Industrial Control and Debounce Timing, Battery-Powered Sensor Interfaces, Signal Conditioning and Edge Shaping, Compact Consumer and Appliance Timing.
LED Flashing and Indicator Circuits
The TS555IPT is suitable for LED flashers, periodic indicators, and low-duty-cycle signaling circuits because it supports astable operation with a maximum frequency of 2.7 MHz. An external resistor-capacitor network can set the oscillation period, while the output stage drives the indicator through the appropriate current-limiting arrangement. At 5 V, the typical supply current of 110 µA helps limit standby demand in portable products. Because the CMOS timer offers faster operation than the cited 0.1 MHz maximum of the bipolar NE555, it also allows short flashes or higher-frequency visual effects. Confirm LED current limits, output drive capability, and duty-cycle requirements in the final circuit.
おすすめ
Pulse Generators and Delay Circuits
The TS555IPT can generate a defined pulse or one-shot delay in monostable mode, making it useful for retriggerable controls, test fixtures, and sequenced peripheral circuits. The timing network is formed from one external capacitor and the associated resistance path, while the trigger and reset inputs provide deterministic start and abort functions. Its low 110 µA typical supply current at 5 V is beneficial when the pulse circuit remains active but is not continuously switching. The maximum astable rating of 2.7 MHz also indicates strong timing capability compared with the classic 0.1 MHz NE555 limit. Validate pulse-width limits, trigger polarity, and reset behavior against the manufacturer datasheet.
おすすめ
Industrial Control and Debounce Timing
The TS555IPT fits industrial control modules that require fixed delays, switch debounce intervals, or repeatable timing windows. Its -40 °C to 125 °C operating-temperature range supports equipment intended for extended industrial environments, while the 8-TSSOP package supports compact, automated surface-mount assembly. Monostable operation can extend a short mechanical or electrical event into a clean pulse for a controller input. The CMOS supply current of 110 µA typical at 5 V reduces quiescent load compared with a bipolar NE555. Designers should add local VCC bypass capacitance, keep trigger and threshold traces short, and validate the timing network against component tolerance and temperature-dependent behavior.
おすすめ
Battery-Powered Sensor Interfaces
The TS555IPT is useful in battery-powered sensor interfaces that need local timing, pulse shaping, or periodic wake-up control. Its CMOS implementation consumes 110 µA typically at a 5 V supply, versus the 3 mA typical figure cited for the bipolar NE555, which can conserve energy when the circuit spends substantial time between transitions. The timer can produce repeatable pulses for sensor excitation, communication timing, or sampling control. Its 2.7 MHz maximum astable frequency also allows faster periodic operation than a classic NE555. Use the lowest practical supply voltage, maintain stable timing components, and place bypass capacitance near the supply pins to reduce rail disturbance during output transitions.
おすすめ
Signal Conditioning and Edge Shaping
The TS555IPT can implement edge shaping, missing-pulse detection, and Schmitt-trigger-style conditioning by using its trigger and threshold inputs in the conventional 555 topology. Positive and negative trigger capability supports translating noisy or irregular events into defined output transitions. The 2.7 MHz maximum astable frequency allows high-speed timing loops, while the low-power CMOS design suits compact embedded modules. Timing behavior must remain stable across the full input signal range and temperature range of -40 °C to 125 °C. Keep the timing capacitor and resistors close to the device, minimize trigger-node routing, and test threshold crossing behavior at the intended logic levels.
おすすめ
Compact Consumer and Appliance Timing
The TS555IPT is appropriate for compact appliance controls, warning indicators, and consumer modules that require a small timer without a complex microcontroller. The 8-TSSOP package reduces board area and is compatible with automated assembly, while the low-power CMOS process supports portable or intermittently powered products. Common uses include delayed activation, recurring audible or visual indication, and simple output pulse shaping. Compared with the bipolar NE555, the TS555 lowers typical supply consumption at 5 V and supports a higher maximum frequency. Confirm the exact TSSOP footprint, provide local supply decoupling, and respect the limits for discharge current, output current, trigger pulse duration, and reset timing.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TS555IPT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | 8-pin TSSOP |
| Timer Configuration | Single timer/oscillator |
| Technology | CMOS |
| Supply Voltage Range | 2 V to 18 V |
| Typical Supply Current at 5 V | 110 µA |
| Maximum Astable Frequency | 2.7 MHz |
| Operating Modes | Monostable and astable |
| Operating Temperature Range | -40 °C to 125 °C |
| NE555 Compatibility | Pin-to-pin and functionally compatible |
主な差別化要因
- Lower typical supply consumption (vs NE555)
- Higher maximum astable frequency (vs NE555)
- Compact surface-mount implementation (vs NE555N)
設計ノート
Place the timing capacitor and its associated resistors close to the threshold and discharge pins to minimize parasitic capacitance and timing error. Keep the trigger and reset traces short and isolated from the output because high-current output transitions can couple into nearby control nodes. The 8-TSSOP footprint requires attention to lead pitch and the package drawing when checking PCB land patterns.
Add a local bypass capacitor between VCC and ground, with the shortest possible return path and the capacitor positioned close to the supply pins. This is especially important in astable operation because the TS555 reduces supply-current spikes during output transitions but still creates dynamic current demand. Use stable supply voltage and avoid routing the timing capacitor's discharge current through sensitive analog ground paths.
Do not assume every NE555 ordering code is a direct physical replacement. A functional 555 pinout does not guarantee the same TSSOP footprint, lead spacing, output-drive limits, or supply range. Check the exact package drawing, maximum discharge and output currents, trigger and reset timing requirements, and component tolerances before approving a substitute part for an existing TS555IPT board.
For debounce or pulse-shaping applications, treat the trigger and threshold nodes as timing-sensitive rather than ordinary logic inputs. Keep external timing components close to the device, use a suitable ground reference, and validate threshold behavior with realistic rise times and noise. The TS555 can operate up to 2.7 MHz in astable mode, but parasitic inductance, input capacitance, and output loading can alter practical timing performance.
コンプライアンス情報
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code in the referenced product information.