VNQ7050AJTR - 40V 40mOhm Quad High-Side Driver | STMicroelectronics
部品番号: VNQ7050AJTR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.66 | $1.66 |
| 10 | $1.49 | $14.90 |
| 100 | $1.32 | $132.00 |
| 500 | $1.18 | $590.00 |
| 1,000 | $1.05 | $1,050.00 |
VNQ7050AJTR 概要
A high-side driver is a power management IC that connects a load to the positive supply rail, providing switching, protection, and diagnostic functions. In automotive systems, high-side drivers are essential for controlling lamps, solenoids, motors, and resistive loads, replacing discrete MOSFETs and relays with a single integrated solution. The VNQ7050AJTR belongs to the VIPower M0-5 family, which is part of STMicroelectronics' extensive portfolio of smart power switches designed for harsh environments.
Key features of the VNQ7050AJTR include undervoltage shutdown, overvoltage clamp, load current limitation, thermal shutdown with auto-restart, and a dedicated status output for fault detection. Each channel has an open-drain diagnostic pin that reports overcurrent, overtemperature, and other fault conditions. The device also features a very low standby current of 0.5uA, making it suitable for battery-powered applications where quiescent draw is critical.
The VNQ7050AJTR uses ST's proprietary VIPower M0-5 technology, which integrates a vertical MOSFET with intelligent control circuitry on a single chip. This architecture provides fast switching, low conduction losses, and robust protection against short circuits and thermal overload. The device is AEC-Q100 qualified, ensuring reliability for automotive applications, and is RoHS compliant.
Typical applications include automotive body control modules, lighting control (LED and incandescent), DC motor control, and industrial PLC outputs. The device's ability to drive inductive loads with built-in demagnetization energy handling makes it ideal for relay and solenoid replacement. In automotive lighting, the VNQ7050AJTR can drive multiple LED strings with PWM dimming, thanks to its fast switching capability.
When designing with the VNQ7050AJTR, ensure adequate PCB copper area for heat dissipation, as the PowerSSO-16 package relies on the exposed pad for thermal management. The device's current limitation feature protects the load and the IC, but the designer must consider the thermal budget under continuous short-circuit conditions. Proper decoupling capacitors on the supply and careful layout of the diagnostic pins are recommended for reliable operation.
ドロップイン代替品: VNQ7050AJTR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: VNQ7050AJTR （同一形状・フットプリント） — 相違点: Number of Channels, Package.
クイック比較ツール — 並列比較する代替部品を選択:
VNQ7050AJTR-E
✅ ドロップイン📋 参考代替品（カタログ未掲載）
VNQ7050AJ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
VNQ7050AJTR-Q1
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
BTS7008-2EPA
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$0.702 / 個
データシートを見る →MC07XS6517
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
VNQ7050AJTR 最大定格＆電気的特性
| Number of Channels | 4 |
| 出力タイプ | High-Side |
| Supply Voltage Range | 4 V to 40 V |
| On-State Resistance (Typical) | 40 mOhm per channel |
| Output Current per Channel | 9 A (max) |
| Total Output Current | 21 A (max) |
| Standby Current | 0.5 uA |
| Supply Current (Active) | 10 mA |
| 動作温度範囲 | -40°C to +150°C |
| パッケージ | PowerSSO-16 |
| 実装タイプ | Surface Mount |
| AEC-Q100 Qualified | Yes |
| RoHS Compliant | Yes |
| Protection Features | Overcurrent, Short-Circuit, Overtemperature, Overvoltage, Under-Voltage Lockout, Load Dump |
| Diagnostic Output | Open-Drain Status per Channel |
| FaultRST Pin | Yes (unlatches output after fault) |
| Sense Enable Pin | Yes (allows OFF-state diagnosis disable) |
VNQ7050AJTR ピン構成
| ピン 1 | IN1 — Input control for channel 1 |
| ピン 2 | IN2 — Input control for channel 2 |
| ピン 3 | IN3 — Input control for channel 3 |
| ピン 4 | IN4 — Input control for channel 4 |
| ピン 5 | VCC — Supply voltage |
| ピン 6 | GND — Ground |
| ピン 7 | STATUS — Open-drain diagnostic output |
| ピン 8 | FaultRST — Fault reset input |
| ピン 9 | SEN — Sense enable input |
| ピン 10 | OUT1 — Output for channel 1 |
| ピン 11 | OUT2 — Output for channel 2 |
| ピン 12 | OUT3 — Output for channel 3 |
| ピン 13 | OUT4 — Output for channel 4 |
| ピン 14 | NC — Not connected |
| ピン 15 | NC — Not connected |
| ピン 16 | NC — Not connected |
主な用途
VNQ7050AJTR の用途: 6 件s: Automotive Body Control Module, LED Lighting Control, DC Motor Control, Industrial PLC Outputs, Relay and Solenoid Replacement, Battery Management Systems.
Automotive Body Control Module
The VNQ7050AJTR is ideal for automotive body control modules (BCMs) that manage lighting, wipers, and other loads. Its quad-channel configuration allows driving multiple loads from a single IC, reducing board space and component count. The device's AEC-Q100 qualification ensures reliability in harsh automotive environments, and its low standby current (0.5uA) minimizes battery drain when the vehicle is off. The integrated protection features (overcurrent, short-circuit, overtemperature) protect both the IC and the loads, while the diagnostic output enables fault detection for system monitoring. In a typical BCM, the VNQ7050AJTR can drive headlamps, tail lamps, and interior lighting with PWM dimming, thanks to its fast switching capability. The wide supply voltage range (4V to 40V) accommodates load dump and cranking conditions, ensuring stable operation. Designers should ensure adequate PCB copper area for heat dissipation, as the PowerSSO-16 package relies on the exposed pad for thermal management.
おすすめ
LED Lighting Control
The VNQ7050AJTR is well-suited for LED lighting control in automotive and industrial applications. Its low on-resistance (40mOhm) minimizes power loss, and its fast switching capability supports PWM dimming for brightness control. The device can drive multiple LED strings, with each channel handling up to 9A, making it suitable for high-power LED modules. The built-in overcurrent and overtemperature protection ensure safe operation, while the diagnostic output allows detection of LED failures. In a typical automotive LED headlamp application, the VNQ7050AJTR is placed between the battery supply and the LED driver, with a microcontroller providing PWM signals to the input pins. The device's wide supply voltage range (4V to 40V) accommodates automotive voltage transients, and its AEC-Q100 qualification ensures long-term reliability. Designers should consider the thermal budget, as driving multiple LEDs at high current can generate significant heat. Proper PCB layout with adequate copper area and thermal vias is essential for heat dissipation.
おすすめ
DC Motor Control
The VNQ7050AJTR can be used for DC motor control in automotive and industrial applications, such as window lifts, seat adjusters, and cooling fans. Its high current capability (9A per channel) and low on-resistance make it suitable for driving motors directly. The device's built-in demagnetization energy handling allows it to drive inductive loads without external freewheeling diodes, simplifying the design. The protection features (overcurrent, short-circuit, overtemperature) safeguard the motor and the IC, while the diagnostic output enables fault detection. In a typical motor control application, the VNQ7050AJTR is used as a high-side switch, with the motor connected between the output and ground. A microcontroller provides control signals to the input pins, and the status output can be monitored for faults. The device's fast switching capability supports PWM speed control, and its wide supply voltage range accommodates various motor voltages. Designers should ensure adequate heat sinking, as motor starting currents can be several times the rated current.
おすすめ
Industrial PLC Outputs
The VNQ7050AJTR is suitable for industrial programmable logic controller (PLC) outputs, where it can drive solenoids, relays, and actuators. Its quad-channel configuration allows controlling multiple outputs from a single IC, reducing board space and cost. The device's robust protection features (overcurrent, short-circuit, overtemperature) ensure reliable operation in industrial environments, and its wide supply voltage range (4V to 40V) accommodates 24V industrial systems. The diagnostic output enables fault detection for predictive maintenance. In a typical PLC output module, the VNQ7050AJTR is used as a high-side switch, with the load connected between the output and ground. A PLC CPU provides control signals to the input pins, and the status output can be read back for diagnostics. The device's low standby current (0.5uA) is beneficial for power-saving modes. Designers should consider the thermal dissipation, as driving multiple loads at high current can generate significant heat. Proper PCB layout with adequate copper area is essential.
おすすめ
Relay and Solenoid Replacement
The VNQ7050AJTR can replace electromechanical relays and solenoids in automotive and industrial applications, offering faster switching, longer lifespan, and built-in protection. Its high current capability (9A per channel) and low on-resistance make it suitable for driving relays and solenoids directly. The device's built-in demagnetization energy handling allows it to drive inductive loads without external freewheeling diodes, simplifying the design. The protection features (overcurrent, short-circuit, overtemperature) safeguard the load and the IC, while the diagnostic output enables fault detection. In a typical relay replacement application, the VNQ7050AJTR is used as a high-side switch, with the relay coil connected between the output and ground. A microcontroller provides control signals to the input pins, and the status output can be monitored for faults. The device's fast switching capability reduces contact arcing and extends relay life. Designers should ensure adequate heat sinking, as relay coils can draw significant current during activation.
おすすめ
Battery Management Systems
The VNQ7050AJTR can be used in battery management systems (BMS) for load switching and protection. Its low standby current (0.5uA) is critical for minimizing battery drain in idle mode, and its wide supply voltage range (4V to 40V) accommodates various battery voltages. The device's protection features (overcurrent, short-circuit, overtemperature) safeguard the battery and the load, while the diagnostic output enables fault detection. In a typical BMS application, the VNQ7050AJTR is used to connect/disconnect loads from the battery, with a microcontroller providing control signals. The device's fast switching capability supports load shedding and reconnection. The AEC-Q100 qualification ensures reliability in automotive battery systems. Designers should consider the thermal budget, as high-current loads can generate significant heat. Proper PCB layout with adequate copper area is essential for heat dissipation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: VNQ7050AJTR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | VNQ7050AJTR-E | VNQ7050AJ | BTS7008-2EPA | MC07XS6517 |
|---|---|---|---|---|---|
| Package | PowerSSO-16 | PowerSSO-16 | PowerSSO-16 | PowerSSO-16 | PowerSSO-16 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Infineon | NXP Semiconductors |
| Number of Channels | 4 | 4 | 4 | 2 | 4 |
| Supply Voltage Range | 4V to 40V | 4V to 40V | 4V to 40V | 4V to 40V | 4V to 40V |
| On-State Resistance (Typical) | 40 mOhm | 40 mOhm | 40 mOhm | 50 mOhm | 45 mOhm |
| Output Current per Channel | 9A | 9A | 9A | 8A | 10A |
| Standby Current | 0.5 uA | 0.5 uA | 0.5 uA | 1 uA | 0.8 uA |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Quad-channel configuration in a single PowerSSO-16 package （vs BTS7008-2EPA)
- Ultra-low standby current of 0.5uA （vs MC07XS6517)
- AEC-Q100 qualification with comprehensive protection （vs BTS7008-2EPA)
設計ノート
The VNQ7050AJTR in PowerSSO-16 package requires adequate PCB copper area for heat dissipation. The exposed pad must be soldered to a thermal land with multiple vias to the ground plane. For continuous operation at high currents, calculate the power dissipation (P = I^2 * RDS(on)) and ensure the junction temperature stays below 150°C. For example, at 9A per channel with 40mOhm, each channel dissipates 3.24W, so four channels could dissipate 12.96W, requiring a substantial heatsink or forced air cooling.
Place a 100nF ceramic capacitor close to the VCC pin and a 10uF electrolytic capacitor for bulk decoupling. The input pins (IN1-IN4) should have series resistors (e.g., 10kOhm) to limit current and protect against ESD. The STATUS pin is open-drain and requires a pull-up resistor (e.g., 10kOhm) to VCC. The FaultRST pin should be tied to VCC through a resistor if not used, or connected to a microcontroller for fault reset. The SEN pin can be left floating if not used.
Do not exceed the absolute maximum supply voltage of 40V, as this can damage the device. Ensure the load current does not exceed the maximum rating of 9A per channel. When driving inductive loads, the built-in demagnetization handles the energy, but verify that the load dump protection is adequate for your application. The device has a latch-off protection feature; use the FaultRST pin to reset after a fault. Avoid connecting the STATUS pin directly to a high-voltage rail without a pull-up resistor.
コンプライアンス情報
AEC-Q100 qualified per Arrow listing. RoHS compliant per STMicroelectronics. REACH compliance assumed based on ST's environmental policy.
