VSC7157XYS-03 - SAS Port Expander | Maxim Integrated
部品番号: VSC7157XYS-03 ✗ 生産終了VSC7157XYS-03 概要
An SAS expander is an interface IC that increases the number of Serial Attached SCSI devices addressable by a storage controller. Within the storage hierarchy, it sits between an initiator or host adapter and attached SAS disks, tape drives, or other storage peripherals. Unlike a direct-connect SAS controller, an expander enables scalable fanout and edge topologies, reducing the number of host connections required for larger storage systems.
The core application requirement is compatibility with the ANSI T10 Serial Attached SCSI 1.0 and 1.1 specifications. This makes the VSC7157 family applicable to storage equipment designed around the SAS interconnect architecture rather than generic parallel SCSI. Edge configurations support systems where expansion occurs near the host adapter, while fanout configurations support larger collections of peripheral devices through a hierarchical expander arrangement.
The manufacturer datasheet identifies embedded midrange and enterprise storage as the principal target environments. Those systems typically combine multiple drive bays with demanding requirements for reliable device discovery, fault isolation, and scalable enclosure wiring. Using a dedicated SAS port expander allows the storage controller to manage a broader device population while preserving a structured interface topology across blade servers, JBODs, and RAID systems.
Typical implementation work includes checking the host-side SAS link requirements, confirming the expander topology required by the enclosure, and assigning physical connector and backplane signals correctly. Board-level implementation must also account for power sequencing, signal integrity, thermal conditions, and the system behavior required when a drive, cable, or expander path becomes unavailable.
A key sourcing consideration is that VSC7157XYS-03 is a specific ordered variant. Its protocol capability and device family are established, but package dimensions, pin assignments, electrical limits, and orderable packaging details should be confirmed against the manufacturer datasheet before committing a PCB layout or production release.
This product page consolidates the confirmed SAS expansion capability, applicable ANSI T10 specifications, target storage applications, sourcing workflow, and engineering-design considerations. It also distinguishes the specific VSC7157XYS-03 ordering code from generic expander functions, helping designers evaluate protocol fit before requesting a quote or beginning detailed implementation.
ドロップイン代替品: VSC7157XYS-03 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: VSC7157XYS-03 (同一形状・フットプリント) — 相違点: Product Type.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストVSC7157XYS-03 仕様
| Product Type | SAS port expander / I/O expander IC |
| Supported SAS Specification | ANSI T10 Serial Attached SCSI 1.0 and 1.1 |
| Supported Expander Topology | Edge and fanout |
| Primary Storage Domain | Embedded midrange and enterprise storage |
VSC7157XYS-03 standard ピン配置ガイド
VSC7157XYS-03 (standard パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: VSC7157XYS-03.
詳細は データシート をご参照ください。
主な用途
VSC7157XYS-03 の用途: 6 件s: Blade Server Storage, JBOD Enclosure Expansion, RAID Storage Controller, Enterprise Storage Expansion, Midrange Storage Enclosure, SAS Drive Backplane.
Blade Server Storage
The Maxim Integrated VSC7157XYS-03 fits blade-server storage architectures that need to expand the number of Serial Attached SCSI peripherals reachable from a host adapter. According to the manufacturer datasheet, it supports ANSI T10 Serial Attached SCSI 1.0 and 1.1 for edge and fanout configurations. The expander can provide a structured path between the storage controller and multiple drive positions within the enclosure. Designers should verify the complete package, pinout, electrical limits, and backplane wiring before implementation, because those details determine whether the existing blade-server interconnect can be reused without redesign.
JBOD Enclosure Expansion
VSC7157XYS-03 is applicable to JBOD enclosures where a controller must serve a larger population of SAS drives than its direct ports can accommodate. The device's documented SAS port expansion under ANSI T10 Serial Attached SCSI 1.0 and 1.1 supports edge and fanout arrangements, allowing storage peripherals to be organized behind an expander layer. For a JBOD design, confirm connector assignments, signal-routing rules, power controls, thermal limits, and fault-management expectations against the Maxim Integrated datasheet before releasing the backplane or controller board.
RAID Storage Controller
The VSC7157XYS-03 can support RAID systems that require scalable attachment of Serial Attached SCSI storage devices. Its ANSI T10 SAS 1.0 and 1.1 capability and support for edge or fanout expander topologies make it relevant to midrange and enterprise RAID controllers with multiple drive bays. The implementation should establish whether the controller's protocol profile, management behavior, and connection arrangement match the expander's documented functions. Layout review should also cover high-speed storage routing, return paths, power integrity, grounding, and the thermal behavior of the populated expansion board.
Enterprise Storage Expansion
In embedded enterprise storage equipment, VSC7157XYS-03 provides a dedicated function for expanding SAS connectivity between storage controllers and peripheral devices. The manufacturer identifies edge and fanout expander implementations as supported modes under ANSI T10 Serial Attached SCSI 1.0 and 1.1. This makes the device relevant to equipment designed for a larger storage population without requiring a separate direct connection for every drive. Product teams should review system-level discovery, enclosure management, failover behavior, and cable topology alongside the electrical and pin-level requirements in the datasheet.
Midrange Storage Enclosure
VSC7157XYS-03 targets embedded midrange storage environments in which multiple SAS peripherals are attached through an expander-based interconnect. Its support for ANSI T10 Serial Attached SCSI 1.0 and 1.1 gives the design a defined protocol basis for edge and fanout expansion. When integrating the device into a midrange enclosure, validate connector roles, trace routing, reference design guidance, power requirements, and operating-temperature limits. Also test enclosure behavior when storage devices or links are removed, since dependable expansion depends on correct topology and system-level fault handling.
SAS Drive Backplane
VSC7157XYS-03 can serve as the expander element in a SAS drive backplane designed to consolidate multiple storage positions behind a controller connection. The documented edge and fanout support under ANSI T10 Serial Attached SCSI 1.0 and 1.1 provides the required protocol framework for embedded expansion. Backplane engineers should follow the Maxim Integrated datasheet for exact connections and implementation details, then coordinate differential routing, layer transitions, connector geometry, grounding, power distribution, and thermal constraints. Validate the complete enclosure because a compliant device alone does not guarantee system-level storage performance.
エンジニアリング参考データ: VSC7157XYS-03 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Product Type | SAS port expander / I/O expander IC |
| Manufacturer | Maxim Integrated |
| SAS Specification | ANSI T10 Serial Attached SCSI 1.0 and 1.1 |
| Expander Topologies | Edge and fanout |
| Target Applications | Blade servers, JBODs, and RAID systems |
| Application Segment | Embedded midrange and enterprise storage |
設計ノート
Use the Maxim Integrated datasheet pin-description table and recommended layout as the controlling references for every VSC7157XYS-03 connection. Pay particular attention to power, ground, reference, clock, and serial interface routing, and place required decoupling where the manufacturer diagram directs it. Do not infer package or pin assignments from the ordering code because the XYS suffix does not communicate the footprint. Review the completed schematic against every named net before releasing the PCB layout.
Treat all Serial Attached SCSI routes as high-speed storage interfaces and follow the datasheet's layer, impedance, length-matching, and return-path guidance. Keep connector transitions and expander traces consistent with the selected board stack-up, and avoid routing disruptive power or unrelated high-speed signals beneath active interface pairs. Validate the finished backplane with the intended enclosure cables and connectors because board-only signal-integrity results may not represent the complete channel between the controller, expander, and drive devices.
Estimate the expander's junction temperature under the highest expected enclosure temperature, load state, and airflow condition before production release. Use the manufacturer thermal information, package geometry, power consumption, and the board's actual copper and heat-spreading arrangement. Keep airflow paths across the IC unobstructed, monitor temperature rises in a populated enclosure, and define an operational shutdown or derating plan if the storage system cannot maintain the manufacturer's recommended thermal conditions.
Do not treat the generic term SAS expander as proof that another device is interchangeable with VSC7157XYS-03. A candidate replacement must match the exact package and pinout while maintaining the required ANSI T10 SAS 1.0 and 1.1 behavior and system-management expectations. Also verify whether the ordered suffix represents a specific package, temperature, or configuration option. Substituting a related family member based only on its SAS function can require PCB, firmware, and enclosure changes.
コンプライアンス情報
The VSC7157XYS-03 is a storage-interface IC and is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the product documentation text and remain unknown.