VSC8522XJQ-02 - 12-Port Gigabit Ethernet PHY | Microchip
部品番号: VSC8522XJQ-02 ✓ 生産中VSC8522XJQ-02 概要
A multi-port Ethernet PHY is an interface IC that converts serial Gigabit Ethernet data between a MAC or switching fabric and physical copper network links. Within the product hierarchy, it is an Ethernet transceiver, a network interface IC, a communications integrated circuit, and a semiconductor. Each integrated PHY handles the physical-layer signaling required for 10/100/1000BASE-T Ethernet, while QSGMII provides a high-speed parallel interface between the PHY and an Ethernet switch or MAC.
The primary features of VSC8522XJQ-02 are 12 integrated Gigabit Ethernet PHYs, support for copper Ethernet links, QSGMII connectivity, and a power-efficient voltage-mode implementation. Consolidating twelve PHYs into one 302-lead TQFP can simplify the physical-layer portion of a multi-port access switch, industrial Ethernet switch, aggregation platform, or embedded telecom equipment. The 24 mm by 24 mm package provides substantial routing area for the high-speed differential Ethernet and QSGMII connections.
The device belongs to Microchip's VSC8522 family and is identified by the -02 ordering suffix. The VSC8522-02 and VSC8522-04 devices contain 12 integrated Gigabit Ethernet PHYs and share the same voltage-mode design, while the -02 selection is specifically described as the industrial-temperature 12-port copper PHY with QSGMII. Detailed electrical limits, register defaults, clocking requirements, and media-interface behavior should be confirmed in the manufacturer datasheet before schematic approval or production release.
Typical uses include industrial Ethernet switches with twelve copper ports, telecom access equipment, network appliances, factory automation systems, and infrastructure equipment that requires several Gigabit Ethernet physical layers in one device. QSGMII is particularly useful where a shared high-speed lane must connect multiple integrated PHYs to a switching entity. The system designer must account for lane width, clocking, signal integrity, thermal performance, magnetics, and connector requirements when allocating the Ethernet channels.
For layout, route each 10/100/1000BASE-T channel according to the differential-pair and isolation rules in the manufacturer reference design, and keep copper PHY traces away from noisy power-conversion paths. QSGMII is a source-synchronous digital interface, so length matching, controlled impedance, return paths, and decoupling are central to reliable operation. Validate power sequencing, reset behavior, reference clocks, and startup timing before relying on the PHY in a new chassis design.
This page consolidates the exact package and product-family information, practical implementation guidance, and a focused comparison of same-family alternatives. It helps engineers identify the correct multi-port PHY while separating confirmed characteristics from parameters that must be checked in the latest Microchip documentation.
ドロップイン代替品: VSC8522XJQ-02 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: VSC8522XJQ-02 (同一形状・フットプリント) — 相違点: Product Type.
VSC8522XJQ-04
✅ ドロップイン価格はお問い合わせください
データシートを見る →VSC8522XJQ-01
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
VSC8522XJQ-03
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
VSC8522XJQ-05
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
VSC8522XJQ-06
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
VSC8522XJQ-02 仕様
| Product Type | 12-port Gigabit Ethernet copper PHY with QSGMII |
| Integrated Gigabit Ethernet PHY Count | 12 ports |
| Ethernet Standard | Gigabit Ethernet |
| Copper Interface | 10/100/1000BASE-T copper Ethernet |
| Digital Host Interface | QSGMII |
| PHY Architecture | Power-efficient voltage-mode design |
| Temperature Class | Industrial temperature |
| Package Type | 302-lead TQFP |
| Package Body Size | 24 mm x 24 mm |
| 実装タイプ | Surface mount |
| Lead Count | 302 leads |
| Primary Application | Industrial and telecom Ethernet switching equipment |
| Manufacturer | Microchip Technology |
| Product Family | VSC8522 |
| Orderable Suffix | -02 |
VSC8522XJQ-02 24 mm x 24 mm ピン配置ガイド
VSC8522XJQ-02 (24 mm x 24 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: VSC8522XJQ-02.
詳細は データシート をご参照ください。
主な用途
VSC8522XJQ-02 の用途: 6 件s: Industrial Ethernet Switching, Telecom Access Equipment, Factory Automation Gateways, Network Edge Appliances, Gigabit Ethernet Network Cards, Industrial Video Infrastructure.
Industrial Ethernet Switching
The VSC8522XJQ-02 fits industrial Ethernet switches that need twelve copper Gigabit Ethernet ports in a single device. Its 12 integrated PHYs reduce the number of discrete physical-layer devices, while QSGMII provides a dedicated high-speed connection to an Ethernet switching entity. The 302-lead TQFP package measures 24 mm by 24 mm, giving the PCB designer substantial area for controlled-impedance differential copper channels and QSGMII routing. Use industrial-grade magnetics and connectors at the line side, follow the recommended channel spacing, and verify power, reference-clock, reset, and thermal requirements against the manufacturer documentation before production.
おすすめ
Telecom Access Equipment
The VSC8522XJQ-02 is appropriate for telecom access equipment requiring a concentrated bank of copper Gigabit Ethernet physical layers. Twelve integrated PHYs provide line-card scalability without requiring twelve separate PHY packages, and QSGMII connects the bank to a higher-layer switching or aggregation circuit. Its industrial-temperature classification supports equipment intended for controlled industrial environments, although the exact numeric operating range must be checked in the datasheet. Layout should isolate each differential pair, provide a continuous return path, minimize switches and vias in copper channels, and implement the manufacturer's recommended power and clocking architecture.
おすすめ
Factory Automation Gateways
The VSC8522XJQ-02 can support factory automation gateways and edge systems that connect numerous machines or sensors to an Ethernet backplane. Its 12 Gigabit Ethernet PHYs provide a high-density copper interface, allowing a single line card to support multiple industrial endpoints. The industrial-temperature selection makes the device a sensible starting point for automation equipment, but the enclosure temperature, airflow, and copper-channel loss must remain inside the device limits. Engineer the design around the manufacturer reference layout, isolate PHY channels from motors and switching supplies, and validate link startup across the full power and temperature range.
おすすめ
Network Edge Appliances
The VSC8522XJQ-02 suits compact network edge appliances that need many local Gigabit Ethernet connections for servers, cameras, storage systems, or access points. Consolidating 12 PHYs into one 302-lead TQFP reduces component count and leaves a single high-speed QSGMII link to the application's switching fabric. The tradeoff is routing complexity: a 24 mm by 24 mm package still requires careful differential-pair geometry, continuous ground references, controlled-impedance QSGMII routing, and careful power-delivery design. Confirm the host interface timing, register initialization, clock source, reset sequence, and thermal margin against the latest Microchip documentation.
おすすめ
Gigabit Ethernet Network Cards
The VSC8522XJQ-02 can serve as the physical-layer section of a high-density Gigabit Ethernet add-in card or embedded network module. Twelve integrated PHYs support multiple copper ports without multiplying the number of PHY packages, while QSGMII connects them to an on-card switching or MAC layer. Designers should use the manufacturer's 302-lead TQFP footprint, account for connector and magnetics placement, and keep the copper channels away from high-current switching converters. Before release, verify supported line rates, auto-negotiation behavior, media compatibility, firmware or register configuration, and the operating-temperature requirements for the target card.
おすすめ
Industrial Video Infrastructure
The VSC8522XJQ-02 can support industrial video infrastructure that aggregates multiple Gigabit Ethernet camera or encoder connections. Twelve integrated copper PHYs provide a high channel count in one physical layer device, and QSGMII links the PHY bank to a switching backbone. This topology is useful when a compact controller must combine several local camera feeds before routing them over a higher-speed uplink. The layout must maintain the differential impedance and separation prescribed for each copper channel, while the power design must prevent switching regulators from corrupting PHY signals. Validate link performance, heat rise, startup behavior, and fault tolerance in the final enclosure.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: VSC8522XJQ-02 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | VSC8522XJQ-04 | VSC8522XJQ-01 | VSC8522XJQ-03 | VSC8522XJQ-05 | VSC8522XJQ-06 |
|---|---|---|---|---|---|---|
| Package | 302-TQFP (24x24) | 302-TQFP (24x24) | 302-TQFP (24x24) | 302-TQFP (24x24) | 302-TQFP (24x24) | 302-TQFP (24x24) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
主な差別化要因
- Twelve copper PHYs consolidated into one device (vs VSC8522XJQ-04)
- QSGMII integration for a shared high-speed uplink (vs VSC8522XJQ-04)
- Power-efficient voltage-mode physical-layer design (vs VSC8522XJQ-04)
設計ノート
Implement the twelve copper channels using the manufacturer's reference layout. Keep each 10/100/1000BASE-T differential pair tightly coupled, provide a continuous reference plane, and avoid placing high-current switching paths between or beneath the pairs. Position the QSGMII interface away from PHY copper channels and follow the documented length-matching and impedance rules to prevent data-integrity degradation.
Design the power network for the complete 12-PHY load rather than a single-port estimate. Use the manufacturer-recommended supply topology, local decoupling, and startup sequence, and verify voltage tolerance, ripple, droop, and inrush at the 302-lead TQFP. Because this device consolidates 12 PHYs into one package, supply integrity and local thermal performance can determine whether all channels operate reliably during simultaneous link activity.
Calculate worst-case dissipation from full 12-port operation, maximum data activity, the highest specified ambient temperature, and the actual board airflow. Use the package thermal information from the manufacturer datasheet and preserve as much exposed copper as the land pattern permits. Validate the assembled design with thermocouples or thermal imaging because the 302-lead TQFP concentrates active circuitry in a 24 mm by 24 mm area.
コンプライアンス情報
The verified product information identifies industrial temperature but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.