W78C438C40PL - 40MHz ROMless 8051 MCU | Nuvoton | 84-LCC
部品番号: W78C438C40PL ✓ 生産中W78C438C40PL 概要
An 8051-compatible microcontroller is an embedded-processing device built around the classic 8051 instruction set and peripheral architecture. Within the semiconductor hierarchy, this device belongs to the 8-bit microcontroller class, combines a CPU core with memory and I/O interfaces, and provides a programmable platform for industrial equipment, communication controllers, test systems, and legacy-compatible control products. Its 84-pin PLCC package offers many external bus and port connections for designs that exceed the pin count of smaller devices.
The W78C438C40PL provides a 40 MHz maximum operating frequency, an 8-bit data bus, and four major groups of 10 I/O lines, totaling 40 I/O ports. It uses 256 bytes of RAM for variables, stack operations, and intermediate data. Because the device is ROMless, program code must be supplied through an external memory interface rather than an internal masked ROM. The 4.5 V to 5.5 V operating range supports conventional 5 V embedded systems.
The W78 family architecture combines an 8051-compatible execution core with external program-memory interfacing, serial communication, and extended parallel I/O. EBI/EMI connectivity expands the design beyond the dedicated port pins, enabling access to external memory and peripheral devices. The 84-pin PLCC format supports both legacy socketed assembly workflows and surface-mount production processes, although the exact assembly method depends on board layout and manufacturing capability.
Typical uses include industrial sequence controllers, communication equipment, data-acquisition systems, test and measurement instruments, embedded gateways, and legacy 8051 peripheral controllers. The 40 I/O lines are particularly useful for machines requiring multiple digital inputs and outputs, while the external memory interface accommodates larger firmware than the on-chip RAM alone can hold. The serial port supports communication with sensors, converters, and service interfaces when the surrounding firmware provides the required protocol.
Designers should allocate the external program-memory bus carefully because it affects board layout, address decoding, and memory timing. Decoupling capacitors should be placed directly beside the supply pins, while exposed clock and high-speed bus routes should remain short. Firmware must also account for the device's ROMless architecture and provide a valid external code-memory interface before operation.
This product page combines the exact W78C438C40PL electrical and packaging characteristics with application guidance, compatibility boundaries, and design-oriented implementation notes. It distinguishes the exact 84-LCC device from related W78C438 variants and provides a practical framework for memory interfacing, peripheral expansion, and lifecycle-aware component selection.
ドロップイン代替品: W78C438C40PL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストW78C438C40PL 最大定格&電気的特性
| Microcontroller Type | 8-bit ROMless 8051-compatible microcontroller |
| Maximum Clock Speed | 40 MHz |
| データバス幅 | 8 bit |
| 動作電源電圧 | 4.5 V to 5.5 V |
| I/O Port Count | 40 ports |
| Internal RAM | 256 × 8 bytes |
| Program Memory | External ROM required |
| External Bus Interface | EBI/EMI interface |
| Serial Port | 1 serial port |
| Package Type | 84-pin PLCC |
| Package Designation | 84-LCC |
| 実装タイプ | Surface mount |
| Core Architecture | 8051-compatible core |
| ライフサイクル状態 | Active |
| Internal Program Memory | 0 bytes |
| RoHS ステータス | Not specified |
W78C438C40PL 84-lcc ピン配置ガイド
W78C438C40PL (84-lcc パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: W78C438C40PL.
詳細は データシート をご参照ください。
主な用途
W78C438C40PL の用途: 6 件s: Industrial Sequence Controller, Data-Acquisition and Control System, Communication Equipment, Test and Measurement Instrument, Embedded Automation Gateway, Legacy 8051 Peripheral Controller.
Industrial Sequence Controller
The W78C438C40PL fits industrial sequence controllers that require extensive digital control and more firmware capacity than an internal ROM provides. Its 40 MHz maximum clock supports faster 8-bit execution, while four 8-bit I/O ports provide 40 lines for limit switches, relays, interlocks, indicators, and actuators. The 84-pin PLCC package also exposes the EBI/EMI interface for external memory or I/O expansion. In a typical implementation, the MCU reads machine-state inputs, executes a control sequence, and drives discrete outputs. Because the device is ROMless, external program memory must be sized for the complete firmware and protected against bus contention during reset or programming operations.
おすすめ
Data-Acquisition and Control System
The W78C438C40PL is useful in acquisition systems where many digital channels must be coordinated with external converters or sensors. Its 40 I/O ports can handle trigger, mode, status, and interlock signals, while the EBI/EMI interface can connect external memory or peripheral devices. Operating at up to 40 MHz allows the firmware to sample, filter, and transfer data without relying on a large external processor. The 256 × 8 bytes of internal RAM provides working storage for temporary samples and state variables. Designers should use the serial port for an external converter or host interface and preserve signal-integrity margins by keeping clock and bus traces short and separated from switching outputs.
おすすめ
Communication Equipment
The W78C438C40PL can serve as the supervisory controller in communication equipment that combines protocol handling with numerous discrete inputs and outputs. Its serial port supports connection to a modem, transceiver, or service interface, while the 40 MHz maximum clock provides additional execution headroom for framing, buffering, and supervisory logic. The 84-pin PLCC package leaves enough pins for link-enable signals, alarm indicators, configuration inputs, and external bus expansion. Since the W78C438C40PL is ROMless, protocol and firmware revisions can be stored in external memory rather than a fixed device ROM. Firmware should include timeout handling, line-state validation, and controlled recovery after communication loss.
おすすめ
Test and Measurement Instrument
The W78C438C40PL is appropriate for legacy-compatible test instruments that require deterministic control, panel interfaces, and external program storage. Its 40 I/O ports can operate front-panel keys, status lamps, relay drivers, and instrument enables, while the EBI/EMI interface supports memory-mapped peripherals. The 40 MHz maximum clock allows the controller to execute timing sequences and service routines in an 8-bit environment. The 4.5 V to 5.5 V operating range aligns with conventional 5 V analog and digital subsystems. For accurate measurements, isolate sensitive analog paths from controller clock and relay-control routes, and use the serial port for calibration data or laboratory automation where the instrument architecture permits.
おすすめ
Embedded Automation Gateway
The W78C438C40PL can act as a gateway between legacy machinery and a host controller when the system requires many discrete supervisory signals. Its 40 I/O lines can collect machine-state inputs and trigger isolated relay outputs, while EBI/EMI allows additional memory or peripheral expansion. The 40 MHz maximum clock supports protocol translation and status aggregation, and 256 bytes of RAM can hold temporary protocol frames and state flags. External program memory is useful for gateway firmware that may require updates. A robust design should include watchdogs or external supervision, watch signal conditioning, and isolation between field wiring and the 4.5 V to 5.5 V controller supply domain.
おすすめ
Legacy 8051 Peripheral Controller
The W78C438C40PL fits legacy 8051 peripheral-control boards that need more I/O and external program memory than compact controllers offer. Its 8-bit architecture and 8051-compatible execution model support familiar interrupt and peripheral-control patterns, while the 84-pin PLCC package provides a direct choice for socketed or surface-mount industrial boards. Four 8-bit ports can drive indicators, keys, relays, and interlock signals, and the serial port can connect to a service interface. External program storage allows firmware revisions without changing masked ROM. During migration, verify the clock source, reset behavior, memory timing, port multiplex functions, and serial peripheral configuration rather than assuming that every 8051 peripheral is identical.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: W78C438C40PL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Nuvoton Technology Corporation |
| Package | 84-pin PLCC (84-LCC) |
| Microcontroller Type | 8-bit ROMless 8051-compatible microcontroller |
| Maximum Clock Speed | 40 MHz |
| Operating Supply Voltage | 4.5 V to 5.5 V |
| Data Bus Width | 8 bit |
| I/O Port Count | 40 ports |
| Internal RAM | 256 × 8 bytes |
| External Bus Interface | EBI/EMI |
| Program Memory | External ROM required |
| Serial Port | 1 serial port |
| Lifecycle Status | Active |
主な差別化要因
- Large I/O capacity in an 8051-compatible controller (vs MC74F538N)
- ROMless architecture supports external firmware storage (vs W78C438C40FL)
- High clock rate for an 8-bit embedded controller (vs MC74F243M)
設計ノート
Assign the 84-pin PLCC footprint from the manufacturer package drawing and verify lead pitch, body dimensions, solderable land length, and courtyard clearance before PCB release. Place the device near the external program-memory interface when feasible, then route the address, data, and control bus with consistent topology. Keep the clock away from relay drivers and switching-power nodes, and provide local supply bypassing at the power and ground pins.
Design the 4.5 V to 5.5 V supply rail so that voltage remains inside the operating range at every power pin under maximum processing and I/O activity. Place a high-frequency ceramic bypass capacitor close to each appropriate supply pin and add bulk capacitance near the board power entry. Verify startup, reset release, and rail sequencing because external program memory and peripheral devices must not contend with the controller while it is reset.
Do not treat the 256 × 8 bytes of RAM as nonvolatile firmware storage. The W78C438C40PL is ROMless, so code must execute from external memory. Confirm address decoding, memory chip-select behavior, access timing, and reset-state bus direction before bringing up a board. Also verify the pin multiplex functions for every parallel port line because a pin configured for an alternate peripheral function may not operate as a general-purpose I/O.
Use short, impedance-controlled routing for the 40 MHz clock and external memory bus. Avoid routing these signals across split power planes or through noisy relay and power-converter areas. If the design uses the serial port alongside long external-bus routes, maintain separate return paths and place termination according to the specific communications standard. Grounding and decoupling are especially important when the controller operates beside switching outputs or high-gain analog circuitry.
コンプライアンス情報
The available product information identifies an RoHS field but does not state a compliance result. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the manufacturer.