WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
部品番号: WM8782ASEDS/RV ✗ 生産終了WM8782ASEDS/RV 概要
An audio ADC converts left- and right-channel analog input voltages into a sequence of digital samples. Within the data-converter hierarchy, the WM8782ASEDS/RV is a stereo delta-sigma ADC: a specialized analog-to-digital converter that uses continuous-time oversampling and digital filtering to produce a serial digital representation of two analog audio channels. Its 24-bit resolution preserves fine amplitude detail, while the I2S interface provides a compact connection to audio processors, codecs, or digital recording systems.
The WM8782ASEDS/RV supports stereo line-level inputs and includes an internal front-end operational amplifier capable of accommodating analog input signals above the normal line-level range. FORMAT and IWL control pins provide compatibility with three industry-standard audio interface configurations, allowing the digital word length and interface format to be selected according to the host processor. A power-down mode is also identified in the product listing, which is useful for reducing consumption when recording is inactive.
The device combines a 2.7 V minimum operating voltage with 24-bit conversion and a 192 kSPS maximum rate in a compact surface-mount SSOP-20 package. These characteristics position it for consumer and professional audio capture, including multichannel conversion through multiple stereo devices, digital mixing equipment, and recordable-media products. Its operating-temperature range supports applications beyond ordinary room-temperature consumer environments.
A typical implementation routes left and right analog sources through the stereo input network, configures FORMAT and IWL for the connected digital interface, and connects the I2S data, clock, and word-select signals to an audio controller. Decoupling close to the supply pins and controlled return paths are essential because high-resolution audio performance depends on a clean analog reference and low-noise digital coupling.
The main design trade-off is the resolution and throughput offered in a relatively compact 20-pin SSOP package. Compared with lower-resolution converters, the 24-bit output preserves more dynamic range but requires careful analog conditioning and clock-layout discipline. Compared with higher-channel-count converters, the two-channel architecture is simpler and well matched to a stereo source.
This product record combines the manufacturer device description, exact electrical and package details, sourcing status, technical FAQs, and practical implementation guidance. It also highlights where application-specific data such as the complete pin map and internal-reference behavior must be confirmed in the manufacturer datasheet before layout signoff.
ドロップイン代替品: WM8782ASEDS/RV — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
WM8782ASEDS/V
✅ ドロップイン📋 参考代替品(カタログ未掲載)
WM8782ASEDS/RV 最大定格&電気的特性
| Converter Type | Stereo delta-sigma audio ADC |
| 分解能 | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| Number of Channels | 2 channels |
| Digital Audio Interface | I2S |
| 動作電源電圧 | 2.7 V to 5.5 V |
| 動作温度範囲 | -40°C to +85°C |
| Analog Input Type | Stereo line-level inputs |
| Integrated Front-End | Internal operational amplifier |
| Interface Configuration Control | FORMAT and IWL control pins |
| Supported Interface Modes | 3 industry-standard audio interface modes |
| Power-Down Mode | Supported |
| パッケージ | 20-pin SSOP |
| 実装タイプ | Surface mount |
| Digital Filtering | Supported |
| RoHS ステータス | Compliant |
| Product Lifecycle | Discontinued |
WM8782ASEDS/RV 20-pin ssop ピン配置ガイド
WM8782ASEDS/RV (20-pin ssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: WM8782ASEDS/RV.
詳細は データシート をご参照ください。
主な用途
WM8782ASEDS/RV の用途: 6 件s: Digital Audio Recorders, Professional Audio Capture, Digital Mixing Consoles, Consumer Audio Capture, Audio Interfaces, Multichannel Audio Equipment.
Digital Audio Recorders
The WM8782ASEDS/RV fits two-channel digital recorders requiring 24-bit conversion at rates up to 192 kSPS. Its stereo line-level inputs provide a straightforward analog front end, while FORMAT and IWL pins let the system adapt the output to the connected processor. The I2S interface carries left and right channel data without requiring a parallel converter bus. Designers should condition the source for the ADC input range, keep the analog traces short, and verify the master or slave clock relationship against the recorder controller. The converter's power-down mode can also support power-managed recording paths.
Professional Audio Capture
A 24-bit stereo ADC with a 192 kSPS ceiling supports high-resolution capture in professional monitoring and recording equipment. The WM8782ASEDS/RV accepts stereo line-level inputs and includes an internal front-end operational amplifier for signals that exceed the ordinary line-level range. FORMAT and IWL provide interface adaptation across three industry-standard modes. A production design should still verify signal headroom, clock jitter tolerance, analog-noise performance, and grounding in the final board layout because converter specifications alone do not establish complete system performance.
Digital Mixing Consoles
The WM8782ASEDS/RV can serve as the stereo input converter in a digital mixing console or digital signal processor. Its 24-bit word length and I2S output suit processors that consume serial PCM audio, while the selectable FORMAT and IWL modes simplify interface configuration. Placing the converter close to the analog input connectors helps minimize signal degradation before digitization. The design should use separate analog and digital return paths, avoid routing switching-node or high-current traces beneath the ADC, and confirm that the host processor supplies or accepts the required master or slave clock.
Consumer Audio Capture
The WM8782ASEDS/RV is suitable for consumer products that capture stereo analog audio and transfer it to a digital signal processor. Its 2.7 V to 5.5 V operating range supports common low-voltage system architectures, and the dual-channel ADC eliminates the need for separate converters in a stereo source. The compact 20-pin SSOP package helps conserve board area, but pin density still demands careful fan-out and decoupling. Firmware must also configure the FORMAT and IWL pins consistently with the selected audio word length and serial framing.
Audio Interfaces
A compact stereo audio interface can use the WM8782ASEDS/RV to convert left and right analog inputs into a 24-bit I2S stream. The converter supports sampling rates up to 192 kSPS, giving a single architecture the flexibility to address high-resolution playback, recording, or monitoring functions. The internal front-end amplifier accommodates appropriately conditioned signals above ordinary line level, but the application still requires input protection and gain planning. Board layout should keep connectors, protection components, and analog input traces away from the digital clock and data region.
Multichannel Audio Equipment
Multichannel recorders and mixers can pair multiple WM8782ASEDS/RV devices for additional stereo channels. Each converter handles two channels at up to 24-bit resolution and 192 kSPS, while the common I2S format can simplify synchronization into a multi-channel audio processor. Accurate operation depends on assigning a consistent clock architecture and ensuring that data and word-select timing remain aligned across devices. Power and ground distribution must be designed to prevent one converter's switching activity from disturbing another channel's analog input measurements.
エンジニアリング参考データ: WM8782ASEDS/RV — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | WM8782ASEDS/V |
|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP |
| Brand | Cirrus Logic | Cirrus Logic |
| Converter Type | Stereo delta-sigma audio ADC | Stereo audio ADC |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kSPS | 192 kSPS |
| Number of Channels | 2 channels | Stereo |
| Digital Interface | I2S | I2S |
主な差別化要因
- Matches the documented same-family converter specifications (vs WM8782ASEDS/V)
- Combines two high-resolution audio channels in one converter (vs WM8782ASEDS/V)
- Supports programmable digital framing and word length (vs WM8782ASEDS/V)
設計ノート
Separate the analog input network from the I2S clock and data routing. Route left and right channels as matched paths where practical, place input decoupling and protection close to the relevant pins, and avoid placing digital return currents beneath the analog input area. The integrated front-end amplifier helps accommodate larger input signals, but it does not remove the need for controlled grounding and short, quiet analog traces.
Use the manufacturer reference circuit and pin-specific capacitor placement when designing the 2.7 V to 5.5 V supply network. Keep supply return paths compact and use dedicated analog and digital return treatment around the converter. Power-down support can reduce consumption during inactive periods, but rail sequencing and signal shutdown behavior should be checked in the complete system rather than assumed to be identical to a general-purpose power-control pin.
Configure FORMAT and IWL according to the receiving processor and verify master-versus-slave clock operation, word-select polarity, and data timing from the manufacturer timing diagram. Keep I2S clock, data, and word-select traces short and away from analog inputs. Although the interface is serial, clock jitter and edge quality can still influence conversion performance at high sample rates, so source termination or series damping should be evaluated from the actual clock topology.
Do not substitute a converter based only on resolution and sample rate. Pin assignments, analog input range, clock architecture, interface mode, supply limits, and package dimensions must all match. In particular, the WM8782ASEDS/V has the same listed headline converter specifications and 20-SSOP package, but its ordering suffix requires review against the manufacturer's ordering guide before it is approved as a replacement.
コンプライアンス情報
RoHS compliance is identified in the verified JLCPCB product listing. No additional compliance declarations are specified in the manufacturer description or distributor records.