XA3S200-4PQG208Q - 200K Automotive Spartan-3 FPGA | Xilinx
部品番号: XA3S200-4PQG208Q ✗ 生産終了XA3S200-4PQG208Q 概要
A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable interconnect, and input/output resources. Its hierarchy extends from an FPGA to a programmable logic device, then to a digital semiconductor and general-purpose integrated circuit. FPGAs are selected when design flexibility, parallel processing, hardware acceleration, or field updates are more valuable than the lower unit cost and predictable power of a fixed logic ASIC.
The XA3S200-4PQG208Q provides 200,000 system gates, 4,320 logic elements, and 221,184 RAM bits in a single package. Its 141 user I/O pins support external interfaces and system connections, while the 90 nm process and 1.2 V nominal core voltage identify it as a Spartan-3 XA architecture. The automotive temperature grade and AEC-Q100 qualification distinguish this Q-suffix device for demanding automotive applications.
The Spartan-3 XA architecture combines configurable logic, block RAM, dedicated digital signal-processing resources, and programmable I/O standards. A maximum clock frequency of 125 MHz is listed for the XA3S200 family, providing a useful performance reference for control, communication, sensor-processing, and embedded systems designs. Exact timing must be evaluated against the device-specific speed grade and the manufacturer datasheet before system timing closure.
Typical uses include automotive body and chassis control, sensor conditioning, motor control, infotainment interfaces, gateway logic, and distributed electronic control units. The 141 I/O count and 221,184 RAM bits allow multiple external buses and parallel data paths to be implemented without adding a separate processor when the required logic fits within the FPGA resource limits.
Use the manufacturer pin description table when assigning power, ground, configuration, clock, and user I/O connections. The automotive system should also account for the extended temperature grade, decoupling requirements, configuration startup behavior, signal-integrity rules, and AEC-Q100 qualification constraints listed for the device.
This page consolidates the available XA3S200-4PQG208Q specifications, same-package alternatives, application guidance, comparison parameters, and practical design notes into an engineering-focused reference for FPGA designers, automotive electronics developers, and component sourcing teams.
ドロップイン代替品: XA3S200-4PQG208Q — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XA3S200-4PQG208Q (同一形状・フットプリント) — 相違点: Device Type, Package, Temperature Grade.
XA3S200-4PQG208I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XA3S200-4PQ208Q
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XA3S200-4PQG208Q 最大定格&電気的特性
| Device Type | Spartan-3 XA Field-Programmable Gate Array |
| Equivalent System Gates | 200,000 gates |
| Logic Cells | 4,320 cells |
| Configurable Logic Blocks | 480 CLBs |
| Block RAM | 221,184 bits |
| User I/O Pins | 141 pins |
| Total Terminals | 208 terminals |
| Core Voltage Range | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| Process Technology | 90 nm |
| Maximum Family Clock Frequency | 125 MHz |
| パッケージ | 208-pin PQFP / 208-BFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| 実装タイプ | Surface mount |
| Temperature Grade | Automotive |
| Automotive Qualification | AEC-Q100 qualified |
XA3S200-4PQG208Q square ピン配置ガイド
XA3S200-4PQG208Q (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XA3S200-4PQG208Q.
詳細は データシート をご参照ください。
主な用途
XA3S200-4PQG208Q の用途: 6 件s: Automotive Sensor Interface, Automotive Body Control Logic, Motor and Actuator Control, Vehicle Network Gateway, Diagnostics and Fault Logging, Industrial and Transportation Control.
Automotive Sensor Interface
The XA3S200-4PQG208Q fits automotive sensor-interface logic that requires deterministic parallel signal acquisition and local processing. Its 141 user I/O pins provide connections for multiple sensors and digital peripherals, while 4,320 logic cells and 221,184 RAM bits can implement filtering, thresholding, calibration tables, and fault monitoring in parallel. The 1.14 V to 1.26 V core range and AEC-Q100 qualification support integration into demanding vehicle electronics. Use the manufacturer I/O-standard and timing tables to establish voltage compatibility, termination, and edge-rate requirements for each external sensor.
おすすめ
Automotive Body Control Logic
The XA3S200-4PQG208Q can consolidate body-control functions such as switch input decoding, actuator sequencing, lamp logic, and diagnostic state machines into one programmable device. Its 480 configurable logic blocks and 4,320 logic cells provide parallel hardware rather than relying entirely on sequential microcontroller execution. With 141 user I/O pins, the FPGA can bridge multiple body modules and implement debounce, diagnostics, or fault logging. Automotive suitability comes from the Q-grade temperature designation and AEC-Q100 qualification, while final system compliance still depends on the complete ECU validation.
おすすめ
Motor and Actuator Control
The XA3S200-4PQG208Q is suitable for parallel motor, valve, or actuator-control logic where multiple timing channels and safety monitoring must operate predictably. The 141 user I/O pins allow position, limit, command, and feedback signals to be connected directly, and the 4,320-cell architecture can implement closed-loop sequencing without excessive serial multiplexing. Its 125 MHz family clock reference supports reasonably fast control logic, although exact timing depends on routing and the selected speed grade. Apply the manufacturer differential-pair, isolation, and power guidelines when connecting to external power stages.
おすすめ
Vehicle Network Gateway
The XA3S200-4PQG208Q can serve as a small protocol-conversion or network-gateway controller when several vehicle interfaces must be buffered, translated, or monitored in hardware. Its 141 user I/O pins and 221,184 bits of block RAM support parallel receive and transmit datapaths, frame checking, and temporary buffering. The programmable architecture permits protocol updates without changing a fixed ASIC design. Designers should use the manufacturer pin and I/O-standard tables to assign clock-capable pins, confirm voltage compatibility, and route high-speed interfaces away from sensitive configuration and power pins.
おすすめ
Diagnostics and Fault Logging
The XA3S200-4PQG208Q can implement diagnostic event detection, fault snapshots, and service-test sequences in an automotive electronic module. Its 480 configurable logic blocks can monitor many digital conditions concurrently, while 221,184 RAM bits provide local storage for counters and captured events. The 141 available user I/O pins simplify attachment to sensors, drivers, and internal buses. Because the device is AEC-Q100 qualified and intended for automotive temperature conditions, it is suitable for a diagnostic subsystem, although production use requires validation of diagnostic coverage, watchdog behavior, and failure-mode requirements.
おすすめ
Industrial and Transportation Control
The XA3S200-4PQG208Q can implement deterministic control logic for transportation equipment, industrial interfaces, and fixed-function automation where programmable parallel logic is valuable. The 4,320 logic cells support multiple control channels, the 141 user I/O pins reduce the need for external I/O expanders, and the 221,184-bit RAM supports counters, buffers, and state histories. The 90 nm Spartan-3 XA implementation also provides a 1.2 V nominal core rail. Select the appropriate temperature-grade variant only after checking environmental limits, and validate timing, power, and functional-safety requirements for the finished equipment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XA3S200-4PQG208Q — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XA3S200-4PQG208I | XA3S200-4PQ208Q |
|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx |
| Package | 208-pin PQFP / 208-BFQFP | 208-BFQFP | 208-pin PQFP |
| Logic Cells | 4,320 cells | 4,320 cells | 4,320 cells |
| Process Technology | 90 nm | 90 nm | 90 nm |
主な差別化要因
- Automotive-grade qualification in the 208-pin PQFP package (vs XA3S200-4PQG208I)
- Complete 200K-gate Spartan-3 XA resource set (vs XA3S200-4PQ208Q)
- 221,184 bits of embedded block RAM (vs XA3S200-4PQ208Q)
設計ノート
Assign every power, ground, configuration, clock, and user I/O connection from the XA3S200 manufacturer pin-description table rather than from the aggregate count of 141 user I/O pins. Place required bypass capacitors close to their associated supply pins, provide a clean configuration path, and route clocks as controlled-impedance signals. The 208-pin PQFP footprint has fine-pitch gull-wing terminals, so inspect solder-joint fillets and assembly clearances during PCB fabrication review.
Design the supply around the documented 1.14 V to 1.26 V core range and the complete I/O supply requirements. Separate core and I/O current estimates when selecting regulators, and include FPGA startup, configuration, and simultaneous I/O activity in worst-case analysis. Do not infer the complete power budget from the nominal 1.2 V core value; use the manufacturer electrical-characteristics tables for quiescent current, dynamic current, and absolute maximum conditions.
Use only the device pins and I/O standards permitted by the XA3S200 datasheet for each external interface. Account for trace length, termination, slew rate, clock jitter, and simultaneous-switching noise when assigning high-rate or differential signals. The 125 MHz family clock is a device capability reference, not a guaranteed routed frequency; complete static timing analysis with the actual constraints and speed-grade limits before release.
Do not substitute the 208-pin package code from the 144-pin XA3S200 variant or the 256-pin package listed by an inconsistent secondary listing. Compare land patterns, pin numbering, power pins, and configuration pins for every proposed replacement. The I-suffix XA3S200-4PQG208I is not an automatic substitute for the automotive Q-suffix device because temperature grade and qualification requirements must also be satisfied.
コンプライアンス情報
The Microchip USA product listing identifies the XA3S200-4PQG208Q as AEC-Q100 qualified for automotive applications. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available product information.