XC3S2000-4FG456I - 2M Gate Spartan-3 FPGA | AMD
部品番号: XC3S2000-4FG456I ✗ 生産終了XC3S2000-4FG456I 概要
An FPGA is a programmable semiconductor that combines configurable logic, memory, and I/O blocks on one die. Its place in the hardware hierarchy is logic fabric inside a programmable logic device, enabling parallel architectures to be implemented and revised in software rather than with a fixed gate-level circuit. The Spartan-3 family targets cost-sensitive, high-volume embedded systems where moderate logic density and substantial I/O are more important than the resources of a large application-specific integrated circuit.
Key features of the XC3S2000-4FG456I include 46,080 logic cells, 333 user I/Os, and a listed maximum operating frequency of 630 MHz. The 456-FBGA package places a large interconnect boundary around the device, supporting designs that combine parallel data acquisition, control logic, protocol bridging, and general-purpose digital processing. The -4 suffix denotes the device speed grade, while the final I identifies the industrial temperature option.
The device is built on 90 nm FPGA technology and operates from a 1.2 V core supply, with additional supply rails specified for configuration and I/O operation. Configuration logic permits the same board design to support multiple hardware personalities when the configuration bitstream is changed. Design engineers normally implement the design in HDL, synthesize it for the Spartan-3 architecture, place and route it, and generate a configuration file for the target board.
Typical applications include industrial control and automation, data acquisition, communications infrastructure, embedded video processing, instrumentation, and test equipment. The 333-I/O count allows high pin-count interfaces to be consolidated in one programmable device, while 46,080 logic cells provide substantial capacity for parallel datapaths and control sequences.
The most important design consideration is package-level planning. A 456-ball fine-pitch BGA requires a multilayer PCB with careful escape-routing, via placement, and power-plane design. Confirm the device pinout, configuration interface requirements, decoupling recommendations, and BGA assembly process in the manufacturer datasheet before releasing the layout.
ドロップイン代替品: XC3S2000-4FG456I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC3S2000-4FG456I (同一形状・フットプリント) — 相違点: Device Type, RoHS Status.
XC3S2000-4FGG456I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC3S2000-4FGG456C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S2000-4FG456C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC3S2000-5FGG456I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S2000-5FG456I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S2000-4FG456I 最大定格&電気的特性
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 2,000,000 gates |
| Logic Cells | 46,080 logic cells |
| User I/O | 333 I/O |
| Core Supply Voltage | 1.2 V |
| Performance Grade | -4 speed grade |
| パッケージ | 456-ball FBGA, 1.0 mm ball pitch |
| Maximum Operating Frequency | 630 MHz |
| FPGA Technology | 90 nm |
| Temperature Grade | Industrial |
| Block RAM | 720 Kb |
| Configuration Logic Blocks | 5,120 LABs/CLBs |
| 実装タイプ | Surface mount |
| Package Pitch | 1.0 mm |
| RoHS ステータス | Non-RoHS variant; the lead-free G suffix variant is available |
| Lead-Free Status | No for the non-G ordering code |
| Ordering Code | XC3S2000-4FG456I |
XC3S2000-4FG456I 1.0 mm ピン配置ガイド
XC3S2000-4FG456I (1.0 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC3S2000-4FG456I.
詳細は データシート をご参照ください。
主な用途
XC3S2000-4FG456I の用途: 6 件s: Industrial Data Acquisition and Control, Communications Protocol Bridging, Instrumentation and Test Equipment, Embedded Video and Image Preprocessing, Industrial Automation and Motion Sequencing, Programmable Logic Consolidation.
Industrial Data Acquisition and Control
The XC3S2000-4FG456I fits multi-channel measurement and control systems that need parallel sampling, timing, and control logic in one device. Its 46,080 logic cells can host acquisition pipelines, counters, protocol handlers, and supervisory state machines, while 333 I/Os provide substantial connectivity for converters, sensors, and actuators. The -4 grade supports performance-oriented designs, and the industrial suffix targets industrial environments. Keep high-speed inputs and outputs on controlled banks, use the manufacturer's recommended clocking scheme, and validate timing against the selected I/O standards.
おすすめ
Communications Protocol Bridging
The XC3S2000-4FG456I is suitable for bridging serial, parallel, and packet-oriented interfaces in industrial communications equipment. Its 2,000,000 system gates provide room for multiple bus engines, buffering logic, FIFOs, and timing-state machines, while 333 I/Os support parallel chip interfaces and multi-bit buses. The device can implement clock-domain crossings with the recommended clocking primitives and isolate protocol rates from external transceiver timing. For each interface, constrain input and output delays, verify the selected I/O standard's voltage, and confirm the configuration pin requirements for the selected mode.
おすすめ
Instrumentation and Test Equipment
The XC3S2000-4FG456I can consolidate timing, control, and data-processing functions in programmable instrumentation such as automated test systems, signal conditioners, and measurement platforms. The 333 I/Os are valuable when many instrument channels must be coordinated, and the 46,080 logic cells support counters, sequencers, pattern generators, and digital signal conditioning. Its 1.2 V core supply reduces logic-rail requirements while separate I/O banks support board-level interface standards. Use the manufacturer pinout and power-decoupling layouts to keep sensitive analog and high-fanout digital sections separated on the PCB.
おすすめ
Embedded Video and Image Preprocessing
The XC3S2000-4FG456I can implement parallel pixel pipelines, timing generators, and control functions for embedded imaging systems where a fixed-function display controller is insufficient. Its 46,080 logic cells and 333 I/Os are suitable for multi-channel data capture, color-space conversion, thresholding, and frame timing, particularly when the sensor interface uses multiple parallel data and synchronization lines. The Spartan-3 architecture allows most image processing to run as a programmable pipeline. Validate horizontal and vertical timing, use registered I/O paths where required, and keep video outputs away from high-current switching nodes.
おすすめ
Industrial Automation and Motion Sequencing
The XC3S2000-4FG456I is well suited to deterministic industrial sequencing, machine control, and motion-command logic that benefits from parallel programmable resources. The 333 I/Os support limit, position, interlock, and actuator signals, while the 46,080 logic cells can implement sequencers, axis controllers, and safety-interlock monitoring. The industrial ordering designation is appropriate for controlled factory environments when the manufacturer's full temperature specification is met. Treat FPGA outputs as deterministic digital command signals and use external isolation or drivers where inductive loads, electrical transients, or galvanic separation are required.
おすすめ
Programmable Logic Consolidation
The XC3S2000-4FG456I can consolidate several discrete CPLD, glue-logic, and interface functions into a single Spartan-3 FPGA when a design needs more than approximately 46,080 logic cells and extensive pin connectivity. This is useful for revision-driven products whose interface requirements evolve, because the logic can be updated through a new configuration bitstream rather than a board respin. The 456-FBGA footprint supports high pin counts but requires careful escape routing and multilayer construction. Establish pin constraints early, preserve configuration access for field updates, and verify timing margins after each architecture change.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC3S2000-4FG456I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC3S2000-4FGG456I | XC3S2000-4FGG456C | XC3S2000-4FG456C | XC3S2000-5FGG456I | XC3S2000-5FG456I |
|---|---|---|---|---|---|---|
| Package | 456-FBGA, 1.0 mm pitch | 456-FBGA, 1.0 mm pitch - same | 456-FBGA - same | 456-FBGA - same | 456-FBGA - same | 456-FBGA - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| System Gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates | 2,000,000 gates |
| Logic Cells | 46,080 logic cells | 46,080 logic cells | 46,080 logic cells | 46,080 logic cells | 46,080 logic cells | 46,080 logic cells |
| User I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O |
| Performance Grade | -4 | -4 | -4 | -4 | -5 | -5 |
| Temperature Designation | Industrial | Industrial | Commercial | Commercial | Industrial | Industrial |
| RoHS and Lead-Free Status | Non-RoHS and lead-containing ordering code | RoHS-compliant and lead-free | RoHS-compliant and lead-free | Non-RoHS and lead-containing ordering code | RoHS-compliant and lead-free | Non-RoHS and lead-containing ordering code |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主な差別化要因
- Lead-free compliance option with identical listed logic resources (vs XC3S2000-4FG456I)
- Higher speed grade without changing the board footprint (vs XC3S2000-4FG456I)
- Substantial I/O consolidation in one programmable device (vs XC9572XL-7VQ64I)
設計ノート
Treat the 456-FBGA footprint as a multilayer-routing problem rather than a conventional two-layer escape-routing exercise. Assign each ball to its power, ground, configuration, clock, and user-I/O class using the manufacturer pin table before placing components. Use short ground references, adequate via-in-pad or via-geometry options under the assembly process, and a plane structure that supports the device's 1.2 V core and configured I/O rails. Validate escape routing with the package-specific BGA design guidance.
Power sequencing and decoupling must follow the Spartan-3 device recommendations for the exact package and configuration mode. Place the manufacturer-specified bypass capacitors at their designated supply balls, keep the core and I/O supply paths low-inductance, and isolate quiet analog supply nodes from digital switching current where the board supports separate rails. Estimate dynamic power from actual resource utilization and clock activity rather than treating the 1.2 V core voltage as the complete power budget.
Define board constraints early because the 333 user I/Os can involve several voltage standards and clock domains. Apply input and output delay constraints to every external interface, use clock-capable pins for source-synchronous and high-fanout clock routing, and reserve matched loading for high-speed outputs. Review channel-to-channel skew, bank voltage compatibility, and simultaneous-switching noise against the implemented design before releasing the board.
Do not select a lead-free G-suffix device solely because its logic resources match. The XC3S2000-4FGG456I changes the compliance and lead-free status, while C-suffix variants change the temperature designator, and -5 variants change the performance grade. Confirm the full ordering code, temperature range, configuration interface, PCB paste and stencil pattern, and approved sourcing channel before releasing a production BOM.
コンプライアンス情報
The non-G ordering code is identified as a non-RoHS, lead-containing variant. The G suffix denotes the lead-free and RoHS-compliant alternative. REACH, halogen-free, and conflict-minerals declarations were not identified.