XC3S50AN-5FT256C 50K Spartan-3AN FPGA | AMD Xilinx
部品番号: XC3S50AN-5FT256C ✗ 生産終了XC3S50AN-5FT256C 概要
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic, memory, and I/O in one device. FPGAs sit within programmable logic devices and broader semiconductor systems, allowing designers to implement parallel datapaths, control logic, interface bridges, and signal processing without relying on a fixed application-specific integrated circuit. The Spartan-3AN family combines this flexibility with low-power 90 nm fabrication.
Important device characteristics include 1,584 logic cells, 176 CLBs, 55,296 bits of RAM, and 195 user I/O. The 17 mm by 17 mm surface-mount package also supports multiple configuration methods identified for the family, including serial and parallel configuration interfaces. These resources make the XC3S50AN suitable for embedded control, industrial automation, communications, and instrumentation systems where parallel logic can simplify an implementation.
The -5 designation identifies a faster device grade than the -4 options commonly encountered in the Spartan-3AN family. This grade is useful when system timing requires additional performance margin, although final timing closure still depends on the selected I/O standards, clocking architecture, routing demand, and design complexity. The 90 nm process technology and 1.2 V core supply reflect the architecture's focus on low-power programmable logic rather than very high-performance logic density.
Typical applications include industrial sensor and motion-control nodes, programmable logic controllers, communications gateways, instrument controllers, embedded test systems, and low-power edge-processing modules. Its 195 I/O count is particularly useful when a design must combine multiple buses, status indicators, serial links, and control outputs without using several companion logic devices.
PCB implementation requires careful ball-grid-array layout and power planning. Place all required decoupling capacitors close to the associated supply balls, provide a clean ground reference, and route sensitive clock and configuration signals away from high-current switching nodes. Confirm the selected package land pattern, voltage rails, configuration interface, and I/O standards against the AMD Spartan-3AN documentation before releasing the PCB.
This product page combines package, resource, I/O, and cross-reference information with same-footprint alternatives and practical design guidance. It supports engineers comparing FPGA capacity, speed grade, package compatibility, legacy-tool constraints, and migration risk before selecting a production device.
ドロップイン代替品: XC3S50AN-5FT256C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC3S50AN-5FT256C (同一形状・フットプリント) — 相違点: Device Type, Logic Cells, Package.
XC3S50AN-5FTG256C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC3S50AN-4FTG256C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC3S50AN-4FT256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC3S50AN-5FT256I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S50AN-4FT256C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC3S50AN-5FT256C 最大定格&電気的特性
| Device Type | Spartan-3AN field-programmable gate array (FPGA) |
| Logic Cells | 1,584 logic cells |
| Configurable Logic Blocks | 176 CLBs |
| Logic Capacity | 50K gates |
| Block RAM | 55,296 bits |
| User I/O | 195 I/O |
| 最大クロック周波数 | 667 MHz |
| Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| パッケージ | 256-LBGA, 17 mm x 17 mm |
| Terminal Form | Ball |
| 実装タイプ | Surface mount |
| Package Shape | Square |
| Device Speed Grade | -5 |
| Configuration Interfaces | Master serial, SPI, BPI, SelectMAP, and processor slave serial modes |
XC3S50AN-5FT256C square ピン配置ガイド
XC3S50AN-5FT256C (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC3S50AN-5FT256C.
詳細は データシート をご参照ください。
主な用途
XC3S50AN-5FT256C の用途: 6 件s: Industrial PLC Control, Sensor and Motion Control, Communications Gateway, Programmable Test and Measurement, Embedded Interface Consolidation, Low-Power Edge Processing.
Industrial PLC Control
The XC3S50AN-5FT256C is well suited to industrial programmable logic controller designs that combine machine sequencing, discrete I/O, counters, timers, and communication logic. Its 1,584 logic cells and 176 CLBs provide parallel hardware for control loops, while 55,296 bits of block RAM can hold lookup tables, status buffers, and packet data. The 195 user I/O support field inputs, outputs, encoders, and industrial interfaces without requiring numerous companion logic devices. For reliable deployment, verify the temperature-grade limits, isolate noisy inputs, use suitable industrial I/O standards, and complete worst-case timing analysis with the selected -5 device speed grade.
おすすめ
Sensor and Motion Control
The XC3S50AN-5FT256C can implement parallel sensor acquisition, motion sequencing, and actuator control where deterministic response is more valuable than high general-purpose processor performance. The 195 user I/O allow simultaneous connection of digital sensors, capture signals, limit switches, and drive-control outputs. Its 1,584 logic cells can implement filters, interpolation, pulse accumulation, and fault handling in parallel, while 55,296 bits of block RAM can support short acquisition buffers. Place sensitive capture and encoder signals on controlled board regions, use isolated interfaces for external wiring, and validate timing against the highest clock and I/O loading specified by the system configuration.
おすすめ
Communications Gateway
The XC3S50AN-5FT256C is appropriate for protocol conversion, data framing, packet filtering, and low-rate communications gateways requiring parallel logic and multiple external interfaces. A design can divide the available logic among framing state machines, CRC calculation, command parsing, and flow control, while the 195 user I/O permit parallel buses alongside serial transceiver connections. Block RAM can hold frame descriptors and receive buffers, reducing pressure on external memory. Engineers should define each I/O standard and voltage, account for configuration pins and dedicated pins during pin planning, and run static timing analysis after every change to clocking, I/O, or routing pressure.
おすすめ
Programmable Test and Measurement
The XC3S50AN-5FT256C can serve as the control and sequencing element in programmable test equipment, interface fixtures, and automated measurement systems. Its configurable logic can coordinate stimulus patterns, capture timing windows, execute test vectors, and report results in parallel, while the 195 user I/O provide connections to test points and peripheral instruments. The 55,296 bits of block RAM are useful for captured records, masks, and short vector tables. Because instrumentation systems can combine fast edge-sensitive signals with slower controls, assign pins by timing requirements, keep analog and digital return paths separated, and confirm acquisition-path timing with appropriate board-level measurements.
おすすめ
Embedded Interface Consolidation
The XC3S50AN-5FT256C can consolidate several legacy interfaces when a compact controller must bridge parallel buses, serial links, status LEDs, and service ports. The 195 user I/O provide substantial interface flexibility, and the 1,584 logic cells can implement bus arbiters, level translators in logic, protocol adapters, and supervisory state machines. The 50K-gate Spartan-3AN architecture allows the controller to execute parallel work without a separate microcontroller for every peripheral. Review fixed configuration and dedicated pins during schematic design, establish deterministic reset and configuration behavior, and verify every external voltage level against the selected I/O standard before manufacturing.
おすすめ
Low-Power Edge Processing
The XC3S50AN-5FT256C supports low-power edge-processing nodes that perform filtering, feature extraction, event classification, or protocol preprocessing before forwarding information upstream. Its 90 nm Spartan-3AN implementation allows parallel operations to be distributed across configurable logic and block RAM, reducing the need for continuous processor activity. The 195 user I/O can connect sensors, local storage, and communications hardware within a compact embedded controller. Select the appropriate temperature and speed suffix for the deployed environment, control clocking to reduce unnecessary dynamic power, and follow AMD's power-estimation methodology with the final utilization, pin standards, and configuration method.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC3S50AN-5FT256C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC3S50AN-5FTG256C | XC3S50AN-4FTG256C | XC3S50AN-4FT256I | XC3S50AN-5FT256I | XC3S50AN-4FT256C |
|---|---|---|---|---|---|---|
| Package | 256-LBGA | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same | 256-LBGA - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN |
| Logic Cells | 1,584 logic cells | 1,584 logic cells | 1,584 logic cells | 1,584 logic cells | 1,584 logic cells | 1,584 logic cells |
| Block RAM | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits | 55,296 bits |
| User I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O | 195 I/O |
| Speed Grade | -5 | -5 | -4 | -4 | -5 | -4 |
| Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
主な差別化要因
- Faster speed class than the -4 replacements (vs XC3S50AN-4FTG256C)
- Commercial-grade suffix with the full -5 performance class (vs XC3S50AN-5FTG256C)
- Same-footprint industrial-temperature migration path (vs XC3S50AN-4FT256I)
設計ノート
Use the AMD 256-LBGA land pattern and maintain the package's specified ball-to-pad correspondence. Place required bypass capacitors adjacent to the relevant supply balls and keep their ground returns short and continuous. Separate external clock, configuration, and high-speed I/O routing from noisy switching nodes. BGA assembly also benefits from unobstructed inspection access and thermal-via placement beneath the device where the package and PCB construction permit.
Build the power tree around the device's 1.2 V core supply and the external I/O supply requirements identified in the Spartan-3AN documentation. Keep the core and I/O return paths joined at an appropriate power-reference point, avoid sharing high-current return paths with sensitive configuration or clock signals, and provide separate local decoupling at each supply ball group. Use the -5 suffix for timing, while selecting the suffix that matches the deployment temperature requirements.
Do not treat an identical package suffix as proof of an unconditional replacement. A -5 and -4 device differ in speed class, while C, G, and I suffixes indicate different temperature grades. Before substitution, compare static timing results, supported I/O standards, configuration behavior, tool and bitstream compatibility, operating-temperature limits, and the exact PCB footprint. This check is especially important for designs using external memories or demanding clock-to-pin timing.
Plan FPGA configuration and clock distribution early because these signals affect board-level startup reliability and design timing. Respect the configuration-pin requirements in the AMD family documentation, provide the required pull-up or pull-down behavior, and keep configuration traces away from potential interference sources. Route clocks with short symmetric paths, provide a clean reference, and validate timing margin after placement rather than relying only on the nominal 667 MHz device figure.
コンプライアンス情報
The device listing identifies AMD Xilinx Spartan-3AN construction and a 90 nm process, but it does not establish environmental, automotive, lead-free, halogen-free, or conflict-minerals status. These attributes require confirmation for the exact ordering code and manufacturing provenance.