XC4VFX40-10FFG1152C - 4656 Logic Cells FPGA | AMD Xilinx
部品番号: XC4VFX40-10FFG1152C ✗ 生産終了XC4VFX40-10FFG1152C 概要
A field-programmable gate array is a semiconductor whose digital functions are defined by loading a configuration bitstream after fabrication. Within the FPGA hierarchy, the Virtex-4 FX family sits below the Virtex-4 product family and above individual FPGA and CPLD devices. This distinction matters because an FPGA provides substantially more programmable logic and dedicated processing resources than a simpler CPLD while retaining reconfigurable hardware behavior.
The XC4VFX40 device includes 4656 logic cells and 448 I/O, providing a large pin count for high-speed parallel interfaces and multi-channel acquisition systems. Its 1152-BBGA FCBGA package supports dense board-level interconnect and accommodates the power, ground, configuration, clock, and user I/O requirements of a device in this performance class. The -10 speed grade is intended for designs that require more timing margin than the -12 grade while representing the entry speed grade in the Virtex-4 family.
The C suffix identifies the commercial operating-temperature option, specified from 0°C to 85°C. The device uses CMOS technology, and its internal frequency is listed as 1028 MHz. Designers should evaluate achievable logic and I/O timing against their target clock frequency rather than treating the internal-frequency figure as a guaranteed operating frequency for every design.
Typical applications include telecommunications interfaces, industrial automation controllers, high-speed data acquisition, digital signal processing, communications infrastructure, and embedded control systems with parallel logic. The large I/O count is especially useful when multiple buses, converters, memories, clocks, and high-speed links must coexist on a single FPGA.
Board design requires careful attention to the 1152-BBGA footprint, multilayer PCB construction, controlled-impedance routing, separated power distribution, and thermal management. Use the AMD Virtex-4 family documentation for the complete pin-description table, package dimensions, decoupling requirements, configuration details, and electrical characteristics before assigning PCB tracks or power rails.
This page consolidates the key device identity, package and temperature information with application guidance, design notes, and a constraint-focused comparison of pin-compatible Virtex-4 FX40 alternatives. It helps engineers separate true same-footprint substitutions from larger-device options that cannot replace the XC4VFX40 without a PCB redesign.
ドロップイン代替品: XC4VFX40-10FFG1152C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VFX40-10FFG1152C (同一形状・フットプリント) — 相違点: Package Type, Device Type, Logic Cells, Operating Temperature, Speed Grade.
XC4VFX40-10FFG1152I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VFX40-11FFG1152C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC4VFX40-11FFG1152I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VFX40-12FFG1152C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VFX40-12FFG1152I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VFX40-10FFG1152C 最大定格&電気的特性
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Logic Cells | 4656 logic cells |
| I/O Count | 448 I/O |
| Internal Frequency | 1028 MHz |
| Logic Family | CMOS |
| Package Type | 1152-BBGA FCBGA |
| Package Pin Count | 1152 pins |
| Speed Grade | -10 |
| Temperature Grade | Commercial (C) |
| 動作温度 | 0°C to 85°C |
XC4VFX40-10FFG1152C 1152 pins ピン配置ガイド
XC4VFX40-10FFG1152C (1152 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VFX40-10FFG1152C.
詳細は データシート をご参照ください。
主な用途
XC4VFX40-10FFG1152C の用途: 6 件s: Telecommunications Interface Equipment, Industrial Automation and Motion Control, High-Speed Data Acquisition, Digital Signal Processing, Communications Infrastructure, Embedded Control and Test Systems.
Telecommunications Interface Equipment
The XC4VFX40-10FFG1152C fits telecommunications interface equipment that combines parallel data paths, protocol engines, and multiple external interfaces on one FPGA. Its 4656 logic cells provide substantial configurable capacity, while 448 I/O allow designers to connect parallel buses, memories, converters, and network-facing devices without splitting the design across several smaller FPGAs. The -10 speed grade supports general communications designs where timing margin must be verified at system level. Its 1152-BBGA package also creates a demanding but capable platform for multilayer routing, controlled-impedance interfaces, and separate power distribution.
おすすめ
Industrial Automation and Motion Control
The XC4VFX40-10FFG1152C is suitable for industrial automation controllers that coordinate multiple digital channels, sensor interfaces, sequencing logic, and real-time control functions. The 448 I/O provide practical access to encoders, actuators, field buses, machine I/O, and external memory. Its commercial-temperature range of 0°C to 85°C suits controlled indoor equipment, while the -10 grade supports designs that can meet their timing requirements without requiring the fastest Virtex-4 grade. A carefully designed multilayer board is important because the dense FBGA package places demanding power, ground, and signal-integrity constraints on the PCB.
おすすめ
High-Speed Data Acquisition
The XC4VFX40-10FFG1152C can implement parallel acquisition, channel processing, digital filtering, and control logic in a single FPGA. Its 448 I/O are valuable for connecting multiple converters, capture devices, memory banks, and clock sources, while the 4656 logic cells support concurrent datapaths and control state machines. The listed internal frequency of 1028 MHz should be treated as a device-family reference rather than an automatic guarantee for every acquired-data interface; actual throughput depends on I/O standards, clocking, PCB timing, and the selected tool speed grade. Controlled-impedance routing and solid power distribution are therefore central to reliable acquisition performance.
おすすめ
Digital Signal Processing
The XC4VFX40-10FFG1152C supports parallel digital signal-processing systems that combine sampling interfaces, fixed-point arithmetic, filtering, buffering, and downstream control. The FX40 device provides 4656 logic cells and 448 I/O, enabling several processing channels to coexist while retaining extensive external connectivity. The -10 speed grade is appropriate when the design can satisfy timing with additional margin and power efficiency is important. Designers should evaluate the dedicated arithmetic resources and memory configuration for the exact workload, then use the AMD device documentation to establish achievable clock rates and I/O performance.
おすすめ
Communications Infrastructure
The XC4VFX40-10FFG1152C can serve as the programmable fabric in communications infrastructure equipment requiring parallel backplane interfaces, packet handling, buffering, and monitoring logic. Its high pin count permits multiple buses and high-speed I/O standards to be assigned without aggressive multiplexing, while 4656 logic cells provide room for concurrent protocol functions. The commercial-temperature grade and -10 speed rating form a practical combination for indoor equipment where cost, power, and timing margin must be balanced. Board bring-up should begin with power sequencing, clock topology, and the package-specific decoupling network described by AMD.
おすすめ
Embedded Control and Test Systems
The XC4VFX40-10FFG1152C is appropriate for embedded test and control systems that need configurable sequencing, instrumentation logic, memory interfaces, and extensive I/O in a compact device. Its logic resources can implement several test channels concurrently, while the 448 I/O simplify connections to stimulus, capture, and control circuitry. The commercial-temperature range suits laboratory and indoor production equipment, and the -10 grade can reduce the timing and power burden associated with the fastest grades. Because the package has 1152 balls, successful implementation depends on a multilayer PCB with careful via placement, plane shaping, and high-speed routing discipline.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VFX40-10FFG1152C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VFX40-10FFG1152I | XC4VFX40-11FFG1152C | XC4VFX40-11FFG1152I | XC4VFX40-12FFG1152C | XC4VFX40-12FFG1152I |
|---|---|---|---|---|---|---|
| Package | 1152-BBGA FCBGA | 1152-BBGA FCBGA | 1152-BBGA FCBGA | 1152-BBGA FCBGA | 1152-BBGA FCBGA | 1152-BBGA FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 FX40 | Virtex-4 FX40 | Virtex-4 FX40 | Virtex-4 FX40 | Virtex-4 FX40 | Virtex-4 FX40 |
| Logic Cells | 4656 logic cells | 4656 logic cells | 4656 logic cells | 4656 logic cells | 4656 logic cells | 4656 logic cells |
| I/O Count | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -10 | -10 | -11 | -11 | -12 | -12 |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial | Commercial, 0°C to 85°C | Industrial | Commercial, 0°C to 85°C | Industrial |
| Internal Frequency | 1028 MHz | 1028 MHz | 1028 MHz | 1028 MHz | 1028 MHz | 1028 MHz |
| Logic Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
主な差別化要因
- Commercial-temperature -10 configuration (vs XC4VFX40-10FFG1152I)
- Lower-numbered speed grade for timing-margin tradeoff (vs XC4VFX40-11FFG1152C)
- Commercial-temperature pin-compatible upgrade path (vs XC4VFX40-12FFG1152C)
設計ノート
Design the board around the AMD package drawing, ball map, and recommended land pattern rather than a generic FCBGA footprint. Confirm pad dimensions, solder-mask definition, component placement clearance, via-in-pad policy, and board-edge spacing against the exact 1152-BBGA package. Use a multilayer stack-up that supports the required power planes and controlled-impedance routes. Validate escape routing from the dense ball array before finalizing component placement around the FPGA.
Partition core and I/O supplies according to the AMD power-supply design guidance, and verify whether the selected board architecture needs separate regulators or shared-source filtering. Place the required bulk and high-frequency decoupling capacitors directly beside their associated balls, with short ground returns and symmetrical placement where recommended. Use the AMD power calculator or device power estimator for the selected -10, -11, or -12 grade because speed-grade substitution changes dynamic power and therefore the thermal and power-budget assumptions.
The 1152-BBGA package has a large contact area but also significant thermal sensitivity to power density and board construction. Spread high-utilization logic across the device rather than concentrating work in one region, provide continuous copper beneath the package where the package design permits, and evaluate thermal vias according to the AMD assembly guidance. Recalculate junction temperature after changing speed grade or clock activity because moving from -10 to -12 can alter both timing and power behavior.
Assign clocks and high-speed interfaces through the package-aware pin planning process, then preserve controlled-impedance geometry from the FPGA ball to its destination. Avoid long stubs, unnecessary layer transitions, and splits across reference planes. Follow AMD guidance for clock-capacitor placement, dedicated configuration pins, and unused I/O behavior. Perform post-layout timing and signal-integrity verification with the actual PCB stack-up, including package and connector models where the toolchain supports them.
Do not treat the 1028 MHz internal-frequency listing as a guaranteed clock rate for every interface. Speed-grade substitution also requires re-running timing analysis because -10, -11, and -12 have different timing characteristics. Confirm the C versus I temperature suffix, verify the complete 1152-ball footprint, and confirm configuration mode requirements before releasing artwork. Use the exact AMD device ordering table to ensure that every MPN suffix corresponds to the intended package and environmental grade.
コンプライアンス情報
The device is an industrial and commercial FPGA rather than an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from current AMD product documentation or the exact assembly record.