XC4VLX25-12SF363C - 24,192-LC FPGA | AMD Xilinx
部品番号: XC4VLX25-12SF363C ✓ 生産中XC4VLX25-12SF363C 概要
A field-programmable gate array is a programmable digital semiconductor in the FPGA and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnects, block RAM, dedicated input/output resources, and embedded hard processors. Its configuration architecture allows one PCB design to support multiple logic functions through a bitstream, making Virtex-4 LX devices useful where performance, interface flexibility, and product differentiation must coexist within a high-pin-count package.
The 24,192 available logic cells provide substantial parallel-processing capacity, while the 2,688 configurable logic blocks support pipelined datapaths, control logic, protocol bridges, and signal-processing functions. The device offers up to 240 user I/O sites, depending on the exact pin allocation and configuration. Its 363-FCBGA package is specified as 17 x 17 mm and uses surface-mount assembly, allowing dense connections between the FPGA and external memory, transceivers, clocks, and high-speed interfaces.
The XC4VLX25 belongs to the Virtex-4 LX architecture and is manufactured on 90 nm CMOS technology. The -12 suffix identifies the commercial -12 speed grade. Published device information lists a maximum clock frequency of 1205 MHz and a core supply range of 1.14 V to 1.26 V, with 1.2 V nominal. These figures characterize the device family and selected commercial option rather than guaranteeing equivalent performance in every implemented design.
Typical applications include telecommunications line-card and switching equipment, industrial control systems, high-throughput data acquisition, test and measurement platforms, embedded video processing, and network interface equipment. The large logic-cell count and I/O availability are particularly useful when parallel data paths must converge on high-speed serial links or external memory.
Board design should preserve the manufacturer's recommended power architecture, use appropriate decoupling close to the supply pins, and follow the Virtex-4 packaging and pinout specification for escape routing. Configuration storage, clock distribution, termination, signal-integrity analysis, and thermal-management requirements also need to be evaluated before the package is committed to a multi-layer PCB.
This page organizes the key device specifications, credible same-footprint alternatives, package constraints, and practical design considerations in one place. It also distinguishes directly interchangeable speed-grade choices from package-only ordering variants, helping engineers select a Virtex-4 LX device without overlooking bitstream, timing, temperature-grade, or PCB compatibility requirements.
ドロップイン代替品: XC4VLX25-12SF363C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX25-12SF363C (同一形状・フットプリント) — 相違点: Device Type, Logic Cells, Package, Speed Grade, User I/O.
XC4VLX25-12SFG363C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-11SFG363C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-10SFG363C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-12SF363C 最大定格&電気的特性
| Device Type | Virtex-4 LX field-programmable gate array (FPGA) |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs |
| User I/O | 240 I/O |
| 最大クロック周波数 | 1205 MHz |
| Combinatorial Delay | 0.15 ns per CLB |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Nominal Core Supply Voltage | 1.2 V |
| Speed Grade | -12 commercial |
| パッケージ | 363-FCBGA, 17 x 17 mm |
| Package Type | FCBGA |
| Total Package Pins | 363 pins |
| 実装タイプ | Surface mount |
| ライフサイクル状態 | Active |
XC4VLX25-12SF363C 363 pins ピン配置ガイド
XC4VLX25-12SF363C (363 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX25-12SF363C.
詳細は データシート をご参照ください。
主な用途
XC4VLX25-12SF363C の用途: 6 件s: Telecommunications Line-Card Equipment, Industrial Automation and Control, High-Speed Data Acquisition, Network Interface and Packet Processing, Test and Measurement Instrumentation, Embedded Video and Image Processing.
Telecommunications Line-Card Equipment
The XC4VLX25-12SF363C fits telecommunications line-card designs requiring substantial parallel logic, numerous external interfaces, and predictable timing. Its 24,192 logic cells and 2,688 CLBs can implement packet processing, channelization, framing, traffic management, and hardware-assisted control, while 240 I/O sites support parallel buses, clocks, status signals, and external memory connections. The -12 commercial speed grade provides the highest published Virtex-4 performance option for timing-sensitive paths. In implementation, the FPGA should sit between network transceivers, line-card processors, and control memories, with differential I/O parameters and trace topology selected according to the package specification. Bitstream compatibility applies to devices with compatible configuration, while board-level timing still requires margin for connector, package, and PCB losses.
おすすめ
Industrial Automation and Control
The AMD Xilinx XC4VLX25-12SF363C is useful in industrial automation controllers that combine deterministic sequencing, parallel I/O, communication bridging, and embedded control logic. The 2,688 CLBs support concurrent state machines and datapaths, while the 240 available I/O sites can accommodate encoder inputs, actuator outputs, interlocks, and field-bus transceivers. The -12 grade can help close timing in deeply pipelined control paths where operating margin is valuable. Place the FPGA near the connector and transceiver circuitry to limit routing delay, and isolate high-current switching outputs from sensitive logic through appropriate buffer and protection circuits. The device is identified as commercial grade, so deployments requiring an industrial temperature grade must confirm the appropriate ordering option before release. Configuration should also include safe-state behavior for power-up, reset, and communication-loss conditions.
おすすめ
High-Speed Data Acquisition
The XC4VLX25-12SF363C supports high-speed data-acquisition systems that must capture, filter, format, and route parallel or wide-bus data. Its 24,192 logic cells provide enough parallel capacity for multiple sample channels, digital filtering, packetization, and interface conversion, while 240 I/O sites offer direct connectivity to converters, memory, and test equipment. The published 1205 MHz device-family clock rating and -12 speed grade favor demanding timing paths, although actual acquisition bandwidth remains constrained by the selected I/O standard, pinout, memory interface, and PCB construction. Use short, impedance-controlled routes for high-speed buses, provide independent clocking with controlled jitter, and analyze power integrity before enabling wide parallel interfaces. The package and logic density also make the device suitable for multi-channel systems where replication would otherwise be necessary.
おすすめ
Network Interface and Packet Processing
The XC4VLX25-12SF363C is appropriate for network-interface cards and packet-processing engines that require deterministic parallel throughput before or alongside high-speed serial links. Its 2,688 CLBs can support header parsing, lookup logic, queues, traffic classification, and protocol termination, while 24,192 logic cells allow substantial concurrent datapath parallelism. The -12 commercial grade provides additional timing margin for deeply pipelined network functions. Place the FPGA close to the transceiver and external memory to minimize package and trace delay, then reserve power and ground routing for the relevant I/O banks. Because high-speed serializer performance is not determined by logic-cell count alone, validate the complete interface against the family specification and external component constraints. A lower-speed device remains an option only after static timing analysis demonstrates adequate margin.
おすすめ
Test and Measurement Instrumentation
The XC4VLX25-12SF363C can serve as the programmable control and datapath engine in sophisticated test and measurement equipment. Its logic capacity supports pattern generation, acquisition pipelines, real-time analysis, digital channel alignment, and instrument-control sequencing, while 240 I/O sites provide broad connectivity to converters, memories, triggers, and backplanes. The highest -12 Virtex-4 speed grade can assist with timing closure in wide parallel test channels and high-rate digital processing. A practical implementation should keep clocks and data buses short, use controlled-impedance routing where required, and segregate noisy analog or switching sections from the FPGA. Configuration storage must be completed before measurement starts, and the system should include deterministic reset and trigger paths. The device offers substantial integration without requiring multiple smaller FPGAs.
おすすめ
Embedded Video and Image Processing
The XC4VLX25-12SF363C is well suited to embedded video, imaging, and pixel-processing modules that combine parallel sensor input with programmable transformation logic. The 24,192 logic cells can accommodate pipelines for color correction, filtering, geometry correction, scaling, frame buffering, and data-format conversion, while the 2,688 CLBs permit multiple parallel lanes. The -12 speed grade supports timing-sensitive processing stages, and 240 I/O sites permit direct interface to image sensors, memory devices, and display or processing logic. Practical boards should place the FPGA adjacent to high-bandwidth memory and enforce controlled-impedance routing for synchronous interfaces. Power sequencing and decoupling must account for the device's multiple supply requirements, and thermal analysis should reflect sustained logic utilization. Before substituting a lower speed grade, rerun timing analysis for every image-processing path.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX25-12SF363C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX25-12SFG363C | XC4VLX25-11SFG363C | XC4VLX25-10SFG363C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 363-FCBGA (17 x 17 mm) | 363-FCBGA (17 x 17 mm) | 363-FCBGA (17 x 17 mm) | 363-FCBGA (17 x 17 mm) |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| User I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O |
| Speed Grade | -12 commercial | -12 commercial | -11 | -10 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage Range | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
主な差別化要因
- Highest Virtex-4 speed-grade option (vs XC4VLX25-11SFG363C)
- Same logic density and I/O count across the alternatives (vs XC4VLX25-12SFG363C)
- Direct same-footprint sourcing path (vs XC4VLX25-10SFG363C)
設計ノート
Use the Virtex-4 Packaging and Pinout Specification for the SF363 package to assign every BGA ball before layout. Route power and ground planes to minimize impedance discontinuities, place decoupling capacitors at the nearest available supply and ground balls, and preserve the package escape paths recommended for high-speed interfaces. Because the device uses a dense 17 x 17 mm FCBGA, inspect completed assemblies for bridging, solder-ball defects, and package warpage.
Separate clock inputs, high-speed differential pairs, buses, and lower-speed control signals into predictable routing regions. Match trace lengths where source-synchronous timing requires it, maintain the specified impedance, and avoid plane splits beneath high-speed nets. Use the 240 available I/O sites deliberately rather than assuming every location supports the same voltage or differential standards; pin capability must be checked against the complete package table.
Do not treat the published 1205 MHz figure as a guaranteed user-interface rate or assume that a lower-speed XC4VLX25 is an automatic substitute. Review the complete static timing report, margin targets, I/O standards, and bitstream requirements before changing from the -12 grade. Also verify temperature grade, lead-free ordering requirements, and exact suffix so that a footprint-compatible device is not accidentally rejected for an assembly or qualification constraint.
Estimated: device dissipation depends on the implemented logic, I/O activity, voltage, and switching frequency, so calculate it from the actual design rather than the maximum clock rating. Use the package thermal data with the PCB copper area, airflow, and adjacent heat sources to estimate junction temperature. Keep high-current switching circuitry away from the package where practical and validate the finished assembly at the highest expected ambient temperature and utilization.
コンプライアンス情報
The -12SFG363C ordering code is identified as Pb-free by a distributor listing, but the compliance status of the exact -12SF363C ordering code is not stated. RoHS, REACH, halogen-free, and conflict-minerals status remain unknown.