XC4VSX35-11FF668I - 34,560-Cell -11 FPGA | AMD | Industrial
部品番号: XC4VSX35-11FF668I ✗ 生産終了XC4VSX35-11FF668I 概要
A field-programmable gate array is a semiconductor whose digital circuit is configured after manufacture. Within the product hierarchy, an FPGA sits above basic programmable logic and below application-specific programmable systems. It combines configurable logic blocks, programmable interconnect, memory resources, input/output blocks, and clock-management circuitry on one integrated device. This architecture allows engineers to implement parallel data processing, protocol handling, control logic, and signal-processing functions without designing a fixed-function ASIC.
The XC4VSX35-11FF668I provides 34,560 logic cells across 3,840 CLBs, 448 user I/O, 1205 MHz listed internal frequency, and 1.2 V core operation. Its -11 speed grade and industrial temperature designation make it suitable for embedded industrial, communications, instrumentation, and test systems requiring deterministic programmable logic. The FCBGA-668 package supports dense board integration, although careful escape-routing, decoupling, thermal, and signal-integrity practices are required.
Virtex-4 SX devices combine programmable logic with DSP48 processing blocks and dedicated memory resources. This architecture is useful when a design must execute multiple data paths concurrently, such as filtering, modulation, packet classification, or control functions. The supplied material identifies the device as CMOS technology with 34,560 logic cells and a nominal 1.2 V supply, while detailed switching thresholds, block counts by type, and power-consumption limits should be checked in the manufacturer documentation before final sign-off.
Typical uses include industrial control systems, telecommunications line-card logic, network packet processing, high-speed data acquisition, video and image pipelines, and instrumentation platforms. In each case, the FPGA can implement parallel datapaths while its programmable interconnect routes control, clock, and data signals. The 448 I/O count also allows substantial board-level connectivity, reducing the need for external interface logic when pin budgeting is the primary constraint.
A critical design consideration is power and thermal management. Although the core supply is listed as 1.2 V, switching activity and I/O loading strongly influence total power, making device utilization and decoupling requirements important. Place the required bypass capacitors at their power pins, keep high-speed routing short, and provide adequate copper area and thermal paths beneath the FCBGA device.
This product record combines the exact ordering code, key logic resources, package information, pin and footprint guidance, and drop-in comparison options for the AMD Virtex-4 SX family. It supports faster engineering decisions by separating device identity, speed grade, temperature grade, lead-free suffix, and package differences before a replacement is placed on a production BOM.
ドロップイン代替品: XC4VSX35-11FF668I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VSX35-11FF668I (同一形状・フットプリント) — 相違点: Device Type, Mounting Type, Package Type, Speed Grade.
XC4VSX35-11FFG668C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VSX35-10FF668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VSX35-10FFG668C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VSX35-11FF668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VSX35-11FF668CS2
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VSX35-11FF668I 最大定格&電気的特性
| Device Type | Virtex-4 SX field-programmable gate array |
| Logic Cells | 34,560 cells |
| Configurable Logic Blocks | 3,840 CLBs |
| User I/O | 448 I/O |
| Package Pins | 668 pins |
| Package Type | FCBGA-668 |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V nominal |
| Listed Internal Frequency | 1205 MHz |
| Speed Grade | -11 |
| Industrial Junction Temperature | -40°C to +100°C |
| Programmable Logic Type | CMOS FPGA |
| Lead-Free Variant | FFG suffix denotes the lead-free ordering option |
| 実装タイプ | Surface mount |
XC4VSX35-11FF668I fcbga-668 ピン配置ガイド
XC4VSX35-11FF668I (fcbga-668 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VSX35-11FF668I.
詳細は データシート をご参照ください。
主な用途
XC4VSX35-11FF668I の用途: 6 件s: Industrial Control and Automation, Telecommunications Line-Card Processing, High-Speed Data Acquisition, DSP and Digital Signal Processing, Video and Image Processing, Test and Measurement Instrumentation.
Industrial Control and Automation
The AMD XC4VSX35-11FF668I fits industrial controllers that coordinate sensors, actuators, motion-control logic, and safety interlocks. Its 34,560 logic cells and 3,840 configurable logic blocks allow parallel control functions to be consolidated, while 448 I/O provide substantial connectivity for field buses, discrete I/O, and high-speed capture. The industrial I suffix supports a -40°C to +100°C junction-temperature range. Place the FPGA on a multilayer board with short routing, local bypass capacitors, and sufficient thermal spreading. Designers should use the exact manufacturer package data to assign power balls and verify the complete power-supply topology.
おすすめ
Telecommunications Line-Card Processing
The XC4VSX35-11FF668I is suitable for telecommunications line cards requiring concurrent packet classification, framing, filtering, and interface adaptation. Its 34,560-cell Virtex-4 SX architecture provides more parallel logic than a small CPLD, while 448 I/O can connect multiple buses and high-speed interfaces. The -11 speed grade is appropriate when the design requires a performance margin above the -10 option. In a line-card design, keep serial and clock routes impedance-controlled, separate sensitive reference planes where appropriate, and validate timing after any transition to a different speed-grade candidate.
おすすめ
High-Speed Data Acquisition
The AMD XC4VSX35-11FF668I can implement parallel acquisition, digital downconversion, filtering, and data-format conversion in a single FPGA. Its 3,840 CLBs and 448 I/O allow multiple converter channels and control paths to be handled concurrently, while the 1.2 V core architecture aligns with modern mixed-signal board partitioning. Performance depends on correct pin constraints, board-level clocking, and high-speed trace routing rather than logic-cell count alone. Use the manufacturer timing and package documentation to validate every I/O standard, and treat replacement with a -10 device as a new timing-closure exercise.
おすすめ
DSP and Digital Signal Processing
The XC4VSX35-11FF668I fits DSP workloads that benefit from parallel datapaths, including filtering, modulation, correlation, and real-time spectral processing. The Virtex-4 SX family combines programmable logic with dedicated signal-processing resources, while 34,560 logic cells provide capacity for control, buffering, and arithmetic pipelines. Designers should map pipelines to available DSP blocks and analyze timing at the selected -11 speed grade rather than relying solely on an advertised internal frequency. For replacement programs, compare multiplier, block-RAM, and DSP resource requirements before treating any same-package device as functionally equivalent.
おすすめ
Video and Image Processing
The AMD XC4VSX35-11FF668I supports parallel pixel-pipeline, image-filtering, frame-timing, and interface-conversion designs. Its 448 I/O can reduce the amount of external interface logic for multi-channel or wide-parallel video architectures, while 34,560 logic cells accommodate pipeline control and buffer management. The industrial temperature option makes it relevant to industrial imaging equipment requiring a -40°C to +100°C junction range. Place video interfaces away from noisy power sections, use length-matched routes where required by the interface specification, and validate source-synchronous timing with the manufacturer constraints and actual board characteristics.
おすすめ
Test and Measurement Instrumentation
The XC4VSX35-11FF668I is well suited to modular test and measurement equipment requiring programmable sequencing, high-speed capture, pattern generation, and real-time analysis in one device. Its configurable logic can implement multiple measurement channels concurrently, and the 448 available I/O simplify connections to converters, memory, and front-end control. The -11 speed grade provides additional timing margin over a -10 candidate, but replacement still requires full synthesis and static timing verification. Use controlled clock distribution, terminations appropriate to each interface, and separate analog and digital grounding strategies to maintain measurement integrity.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VSX35-11FF668I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VSX35-11FFG668C | XC4VSX35-10FF668C | XC4VSX35-10FFG668C | XC4VSX35-11FF668C | XC4VSX35-11FF668CS2 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 |
| Logic Cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells | 34,560 cells |
| Configurable Logic Blocks | 3,840 CLBs | 3,840 CLBs | 3,840 CLBs | 3,840 CLBs | 3,840 CLBs | 3,840 CLBs |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -11 | -11 | -10 | -10 | -11 | -11 |
| Temperature Designation | Industrial I | Commercial C | Commercial C | Commercial C | Commercial C | Commercial C |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Lead-Free Ordering Option | No G suffix | Yes, G suffix | No G suffix | Yes, G suffix | No G suffix | No G suffix |
主な差別化要因
- Retains industrial temperature designation (vs XC4VSX35-11FFG668C)
- Uses the higher -11 speed grade (vs XC4VSX35-10FF668C)
- Matches the original 34,560-cell implementation footprint (vs XC4VSX35-10FFG668C)
設計ノート
Treat the FCBGA-668 footprint as a high-density escape-routing problem. Follow the exact manufacturer package drawing for ball locations, solder-mask definition, paste pattern, and component height. Route each power ball to an appropriate plane or decoupling network, avoid long neck-downs beneath the device, and use a multilayer stackup with short ground references. Confirm the PCB manufacturing capability for the FF668 land pattern before committing to fabrication.
Use the manufacturer power-rail and decoupling requirements for every voltage domain rather than assuming that the nominal 1.2 V core specification is the only supply. Place required bypass capacitors directly at their assigned package balls, minimize loop area, and provide separate filtering paths for sensitive supplies. Estimated power dissipation cannot be calculated reliably without utilization, I/O activity, clocking, and temperature data, so obtain those values from the implemented design before selecting the power supply and thermal solution.
Plan thermal relief before the first board revision. The 668-ball package concentrates heat beneath the device, so a continuous copper area, via array, and properly connected inner ground plane are important for distributing heat. Use the manufacturer power data for the actual implemented design, apply the required thermal boundary conditions, and verify junction temperature at worst-case ambient, activity, and airflow. Do not infer thermal performance from the -40°C to +100°C junction-temperature designation.
Changing only the ordering suffix can alter speed grade, temperature grade, or lead-free status. A replacement using a -10 speed grade may require new timing constraints and a complete implementation run, while a C temperature suffix may be unsuitable for the existing industrial environment. When qualifying any listed alternative, regenerate the device project, compare utilization, run static timing analysis, inspect pin constraints, and confirm the physical package drawing before releasing the change.
コンプライアンス情報
The FFG ordering option is identified as Pb-free, but no separate RoHS, REACH, halogen-free, AEC-Q100, or conflict-minerals declaration was established for the target ordering code.