XC5VFX70T-1FFG665CES - Virtex-5 FXT FPGA | Xilinx
部品番号: XC5VFX70T-1FFG665CES ✗ 生産終了XC5VFX70T-1FFG665CES 概要
A field-programmable gate array is a semiconductor whose digital logic can be configured after fabrication. Within the semiconductor hierarchy, an FPGA combines programmable logic, block RAM, dedicated DSP resources, programmable input/output blocks, and embedded processors. The Virtex-5 FXT platform is designed for demanding signal-processing, communications, industrial-control, test-equipment, and embedded systems where deterministic parallel processing and substantial I/O density are required.
The XC5VFX70T offers 5,600 logic blocks according to the product listing, 5,455,872 total RAM bits, and 360 user I/O. Its large on-chip memory supports packet buffering, waveform storage, and data movement without frequent external-memory transfers. The high I/O count simplifies connections to parallel buses, converters, transceivers, memory devices, and custom high-speed interfaces, while the DSP resources accelerate fixed-point and finite-transform operations.
The device belongs to the Virtex-5 generation, which uses a programmable logic fabric and dedicated hardware resources rather than a fixed instruction set. This architecture allows the same physical device to implement protocols, control logic, and arithmetic pipelines that would otherwise require several programmable devices. Configuration and system behavior are controlled through the FPGA development environment and the associated device support packages.
Typical uses include telecommunications line cards, industrial automation controllers, radar and signal-processing front ends, network equipment, high-speed test systems, and embedded accelerators. The 360-I/O interface count is particularly useful where multiple buses and high-density board connections must be supported simultaneously. The package also supports fine-pitch assembly, requiring careful PCB layout, thermal management, and manufacturing controls.
The principal design constraint is board-level implementation rather than logic capability. Use the AMD package pinout files to assign every ball correctly, and follow the manufacturer’s decoupling, configuration, power-supply, and high-speed routing guidance. Differential pairs, clocks, and high-current rails require controlled impedance and return paths to prevent signal integrity and power-integrity problems.
This product reference consolidates the verified device identity, resource counts, package characteristics, search-oriented technical questions, and practical selection guidance. It also distinguishes the closest suffix variants by their documented electrical resources, helping engineers identify a pin-compatible replacement without mistaking a different package option for a drop-in substitute.
ドロップイン代替品: XC5VFX70T-1FFG665CES — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC5VFX70T-1FFG665CES (同一形状・フットプリント) — 相違点: Device Type, Package, Package Type, User I/O.
XC5VFX70T-1FFG665I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VFX70T-1FF665CES
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VFX70T-1FFG665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VFX70T-1FFG665I4179
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VFX70T-1FF665I4179
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VFX70T-1FFG665CES 最大定格&電気的特性
| Device Type | Virtex-5 FXT field-programmable gate array |
| Logic Elements | 71,680 logic elements |
| Logic Blocks | 5,600 LABs/CLBs |
| Total RAM | 5,455,872 RAM bits |
| User I/O | 360 I/O |
| パッケージ | 665-FCBGA, 27 x 27 mm |
| Package Type | FCBGA, surface mount |
| Performance Grade | -1 speed grade |
| Logic Family | CMOS |
| Internal Frequency | 1,098 MHz |
| Number of Package Balls | 665 balls |
| 実装タイプ | Surface mount |
XC5VFX70T-1FFG665CES 665 balls ピン配置ガイド
XC5VFX70T-1FFG665CES (665 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC5VFX70T-1FFG665CES.
詳細は データシート をご参照ください。
主な用途
XC5VFX70T-1FFG665CES の用途: 6 件s: Telecommunications Line-Card Processing, Industrial Automation and Motion Control, Digital Signal-Processing Front End, Network Acceleration and Storage Control, Test and Measurement Instrumentation, Aerospace and Defense Control Systems.
Telecommunications Line-Card Processing
The XC5VFX70T-1FFG665CES fits packet-processing and protocol-conversion line cards where parallel logic, on-chip RAM, and numerous external connections must coexist. Its 71,680 logic elements can implement multiple concurrent datapaths, while 5,455,872 RAM bits provide useful capacity for packet queues, statistical counters, and buffering. The 360 user I/O simplifies attachment to network interfaces, backplane logic, and control processors. In a design, place high-speed interfaces near the FPGA and use the AMD package pinout files to preserve the exact ball assignments. The principal trade-off is board complexity: a 665-FCBGA requires fine-pitch routing, extensive decoupling, and careful power planning compared with a smaller FPGA package.
おすすめ
Industrial Automation and Motion Control
The XC5VFX70T-1FFG665CES is suitable for industrial controllers that combine machine vision interfaces, deterministic logic, motion control, and safety-adjacent coordination. The 71,680 logic elements allow parallel acquisition and control functions to share one FPGA, while 5,455,872 RAM bits can support line buffers and state histories. Its 360 user I/O provides substantial connectivity to encoders, sensors, actuators, and industrial transceivers. The -1 performance grade supports timing-oriented workloads, although the exact environmental limits must be checked for the selected suffix. Engineers should isolate noisy inputs, use controlled clocking, and account for the thermal load created by simultaneously active logic and RAM resources.
おすすめ
Digital Signal-Processing Front End
The XC5VFX70T-1FFG665CES can serve as a high-density digital signal-processing front end when multiple filters, transforms, and data paths must operate concurrently. Its 71,680 logic elements provide substantial fixed-logic and control capacity, and the dedicated DSP resources allow arithmetic pipelines to be isolated from general routing. The 5,455,872 RAM bits can hold samples and intermediate results close to the processing engines, reducing some external-memory traffic. With 360 user I/O, the FPGA can connect directly to parallel converters, clocking circuits, and digital data sources. Practical implementation should pipeline for the target clock, constrain timing paths, and use controlled-impedance routing for high-speed converter interfaces.
おすすめ
Network Acceleration and Storage Control
The XC5VFX70T-1FFG665CES is useful in network appliances requiring concurrent packet classification, queue management, protocol transformation, or storage-interface bridging. Its large on-chip RAM budget of 5,455,872 bits supports buffering close to the programmable logic, while 71,680 logic elements can implement multiple independent packet paths. The 360 user I/O increases bandwidth to external network and storage devices without requiring a large I/O multiplexer. A practical system should partition clock domains carefully, add interfaces for PHY or SerDes connectivity, and verify that the selected device is supported by the intended toolchain. Using the FPGA for aggregation can simplify boards, but firmware update and field-recovery requirements must also be planned.
おすすめ
Test and Measurement Instrumentation
The XC5VFX70T-1FFG665CES can implement complex test and measurement logic because it combines 71,680 logic elements, 5,455,872 RAM bits, and 360 user I/O in one programmable device. Pattern generation, acquisition sequencing, timing control, and real-time analysis can be consolidated, reducing synchronization complexity across separate logic devices. The abundant I/O supports parallel fixture control and wide data capture, while block RAM accommodates sample buffers and trigger history. The fine-pitch 665-FCBGA requires careful breakout routing and thermal planning, so engineers should reserve test points, define clock-distribution topology early, and use the AMD package data to construct the PCB land pattern.
おすすめ
Aerospace and Defense Control Systems
The XC5VFX70T-1FFG665CES can support high-reliability embedded functions where deterministic parallel logic, broad I/O access, and substantial internal memory are important. It may be evaluated for navigation processing, communications control, radar data handling, or mission-system logic, subject to the qualification, temperature, radiation, and lifecycle requirements of the specific program. The device provides 71,680 logic elements, 5,455,872 RAM bits, and 360 user I/O for consolidating functions that might otherwise occupy multiple devices. Because qualification does not follow automatically from the device family, engineers must confirm the exact ordering code, screening options, documentation, and mission-temperature requirements with the manufacturer before incorporating the FPGA into a controlled design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC5VFX70T-1FFG665CES — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC5VFX70T-1FFG665I | XC5VFX70T-1FF665CES | XC5VFX70T-1FFG665C | XC5VFX70T-1FFG665I4179 | XC5VFX70T-1FF665I4179 |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Performance Grade | -1 | -1 | -1 | -1 | -1 | -1 |
主な差別化要因
- Full Virtex-5 FXT resource complement in one device (vs XC5VFX70T-1FFG665I)
- Same-package substitution path for established Virtex-5 boards (vs XC5VFX70T-1FF665CES)
- High-density logic and memory for parallel subsystem integration (vs XC5VFX70T-1FFG665C)
設計ノート
Use the AMD Virtex-5 package pinout and mechanical files as the controlling documents for the 665-FCBGA land pattern. Confirm ball assignments, package orientation, pad dimensions, solder-mask clearance, and via-in-pad requirements before releasing the PCB. Because this is a 27 x 27 mm fine-pitch package with 360 user I/O, escape routing can become congested; establish layer count, back-drill rules, and assembly-process constraints during architecture rather than after schematic completion.
Plan the power tree by estimating consumption from actual logic, block RAM, DSP, I/O, and clock utilization rather than treating the full 71,680 logic elements and 5,455,872 RAM bits as continuously active. Provide separate, well-filtered rails where the device guidance requires them, place bulk and high-frequency decoupling close to the relevant balls, and verify the power source impedance. A conservative estimate can include the target clock, I/O standards, toggle activity, and the worst operating corner before selecting regulators and copper widths.
Route clocks and high-speed interfaces as controlled-impedance nets with short, symmetric paths and continuous reference planes. Separate noisy switching returns from sensitive clock and analog-adjacent circuitry, and avoid routing high-speed signals beneath return-path discontinuities. The large I/O count makes escape sequencing essential: assign external connections early, group them by voltage and interface standard, and keep decoupling, configuration signals, and clock inputs close to their package balls.
Do not treat any XC5VFX70T-1FF665 suffix as interchangeable solely because the device family and headline resources match. Check the ordering guide for temperature, package-code, qualification, configuration, and lifecycle differences, then compare the complete AMD pinout file. When replacing the ES suffix with I or C, also verify the production assembly and environmental requirements. Existing bitstreams must be revalidated under the replacement device’s timing and configuration constraints.
コンプライアンス情報
No explicit environmental or material-compliance status for the exact ordering code was identified. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements for the selected production lot.