XC5VLX50T-3FF665C - 46,080-Cell Virtex-5 LXT FPGA | AMD
部品番号: XC5VLX50T-3FF665C ✓ 生産中XC5VLX50T-3FF665C 概要
A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after fabrication. FPGA terminology sits within the broader semiconductor and programmable-logic hierarchy: FPGA devices can contain configurable logic blocks, block RAM, arithmetic processing elements, input/output structures, clocking resources, and embedded hard processors. The Virtex-5 LXT platform targets communications, networking, signal processing, industrial control, embedded systems, and other equipment requiring substantial parallel processing capability in a single package.
Key device attributes include 46,080 logic cells, 3,600 logic array blocks, 2,211,840 RAM bits, and 360 I/O. The -3 speed designation identifies the device performance grade, while FF665C identifies the 665-ball package and commercial-temperature configuration. The 360 I/O provide a high bandwidth between internal programmable logic and external circuitry. This density allows multiple interfaces, data paths, control functions, and memory-intensive algorithms to be implemented concurrently rather than in separate discrete devices.
The Virtex-5 architecture uses the second-generation Advanced Silicon Modular Block approach, with column-based logic organization intended to improve routing and device utilization. Its large on-chip RAM supports packet buffering, data acquisition, waveform storage, and general-purpose embedded memory. Programmable logic supports parallel datapaths for serial communication, image processing, encryption, filtering, and industrial control. The 0.95 V to 1.05 V operating supply is consistent with the low-voltage process used by this generation of high-performance programmable logic.
Typical uses include network interface controllers, test and measurement equipment, industrial automation, video processing, communications infrastructure, and embedded control systems. For a communications design, the 360 I/O can support multiple high-speed interfaces while the 2,211,840 RAM bits retain packet or sample data. In instrumentation, parallel logic blocks can accelerate filtering and data transformation, while block RAM provides local buffering between acquisition and processing stages.
Board design must account for the demanding power, clocking, decoupling, and signal-integrity requirements of a 665-contact FCBGA. Follow the AMD package pinout files and Virtex-5 device documentation when assigning power, configuration pins, clock inputs, and user I/O. Validate thermal performance under the intended workload because activity density and switching rate determine actual power consumption and junction temperature.
This product record combines the device architecture, package characteristics, practical implementation guidance, and same-package alternatives. It also distinguishes speed-grade and temperature-grade options so engineers can assess replacement feasibility without assuming that every similarly named FPGA is electrically, thermally, or lifecycle-equivalent.
ドロップイン代替品: XC5VLX50T-3FF665C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XC5VLX50T-3FFG665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VLX50T-2FF665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VLX50T-1FF665C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VLX50T-1FFG665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VLX50T-1FFG665I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VLX50T-3FF665C 最大定格&電気的特性
| FPGA Family | Virtex-5 LXT |
| Logic Cells | 46,080 cells |
| Logic Array Blocks | 3,600 LABs/CLBs |
| Total RAM | 2,211,840 bits |
| User I/O | 360 I/O |
| 動作電源電圧 | 0.95 V to 1.05 V |
| Process Technology | 65 nm |
| パッケージ | 665-BBGA, FCBGA |
| 実装タイプ | SMD |
| Junction Temperature Range | 0°C to 85°C |
| Speed Grade | -3 |
| Architecture | Second-generation ASMBL column-based architecture |
| Device Type | Field Programmable Gate Array (FPGA) |
| RoHS ステータス | Non-Compliant |
| Lead-Free Status | Contains Lead |
XC5VLX50T-3FF665C 665-bbga, fcbga ピン配置ガイド
XC5VLX50T-3FF665C (665-bbga, fcbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC5VLX50T-3FF665C.
詳細は データシート をご参照ください。
主な用途
XC5VLX50T-3FF665C の用途: 6 件s: Network Packet Processing, Industrial Automation and Control, Test and Measurement Instrumentation, Digital Signal Processing, Video and Image Processing, Embedded Data Acquisition.
Network Packet Processing
The XC5VLX50T-3FF665C fits network packet-processing designs that need parallel classification, filtering, queueing, and header manipulation within one programmable device. Its 46,080 logic cells and 3,600 logic array blocks provide substantial parallel capacity, while 2,211,840 RAM bits support packet buffering and descriptor storage. The 360 user I/O allow multiple data buses and control channels to connect the FPGA to transceivers, network processors, or parallel PHY devices. A practical implementation assigns separate logic regions to parsing and scheduling while using block RAM for temporary packet storage. The primary trade-off is the -3 grade’s power demand, which must be evaluated against the lower-speed XC5VLX50T-2FF665C candidate under the required throughput and timing constraints.
おすすめ
Industrial Automation and Control
The XC5VLX50T-3FF665C is appropriate for industrial automation systems that combine deterministic control, machine vision preprocessing, communications, and safety-adjacent logic in a single device. Its 360 I/O provide connectivity for sensors, actuators, encoders, field buses, and diagnostic circuits, while the 46,080 logic cells can implement multiple parallel control loops. The 2,211,840 RAM bits can hold acquisition buffers, operating records, or communication queues. Designers should partition clocks and power domains carefully because dense programmable logic can raise activity-dependent power consumption. The commercial 0°C to 85°C junction-temperature specification should be checked against the enclosure temperature, airflow, and worst-case switching activity of the production design.
おすすめ
Test and Measurement Instrumentation
The XC5VLX50T-3FF665C suits instrumentation requiring parallel acquisition, real-time filtering, trigger logic, pattern generation, and data analysis. Its 46,080 logic cells can implement multiple digital channels and high-throughput datapaths, while 2,211,840 RAM bits provide local storage for samples and intermediate results. The 360 I/O allow the FPGA to interface with high-speed converters, capture devices, clocks, and communication logic. In a typical instrument, converters feed parallel data into capture logic, the FPGA performs filtering and analysis, and block RAM buffers results for transfer to a host controller. The -3 speed grade favors demanding timing paths, but power and thermal design remain important because operation and switching can raise junction temperature above ambient.
おすすめ
Digital Signal Processing
The XC5VLX50T-3FF665C can implement demanding digital signal-processing pipelines when parallel architecture is advantageous over a sequential processor. Its 46,080 logic cells support filters, transforms, correlation, modulation, and decision logic, while the 2,211,840 RAM bits provide storage for coefficients, sample histories, and intermediate vectors. The 360 I/O can connect the FPGA directly to converters, digital buses, and clock-distribution circuitry. A practical design should map arithmetic operations to the architecture’s dedicated DSP resources where supported and use register pipelines to meet timing rather than relying only on general-purpose logic. Before choosing a lower-speed same-package replacement, verify that the design still meets sample-rate and latency targets after timing analysis and implementation.
おすすめ
Video and Image Processing
The XC5VLX50T-3FF665C is suitable for parallel video and image-processing functions such as pixel filtering, color conversion, object detection preprocessing, and frame buffering. Its large logic population supports multiple processing pipelines, and 2,211,840 RAM bits can accommodate line buffers, frame segments, and working data. The 360 user I/O provide ample connectivity for parallel sensor interfaces, display paths, memory controllers, and synchronization signals. Implementations should use the -3 grade when timing margins are tight, particularly for wide parallel buses and multi-pixel processing stages. Because video designs can sustain high switching activity, power estimation and thermal validation should include realistic frame rates, blanking intervals, and simultaneous I/O activity rather than relying on static logic utilization alone.
おすすめ
Embedded Data Acquisition
The XC5VLX50T-3FF665C fits embedded data-acquisition systems that must collect multiple channels, buffer samples, and perform real-time processing before transferring results. The 360 I/O support parallel sensor inputs and control outputs, while 2,211,840 RAM bits can retain acquisition windows or intermediate results. Its 46,080 logic cells allow channel conditioning, timestamp handling, filtering, and communication framing to coexist in one device. In a practical architecture, input registers capture synchronized samples, RAM buffers store burst data, and programmable logic manages triggers and data transfer. The device should be evaluated against the acquisition clock, required latency, sustained data rate, and storage depth; those constraints determine whether the -3 grade provides enough timing margin or whether a lower-speed same-package option can reduce power.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC5VLX50T-3FF665C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC5VLX50T-3FFG665C | XC5VLX50T-2FF665C | XC5VLX50T-1FF665C | XC5VLX50T-1FFG665C | XC5VLX50T-1FFG665I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA | 665-BBGA, FCBGA |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Logic Array Blocks | 3,600 LABs/CLBs | 3,600 LABs/CLBs | 3,600 LABs/CLBs | 3,600 LABs/CLBs | 3,600 LABs/CLBs | 3,600 LABs/CLBs |
| Total RAM Bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits | 2,211,840 bits |
| User I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Speed Grade | -3 | -3 | -2 | -1 | -1 | -1 |
主な差別化要因
- Highest identified same-package speed grade (vs XC5VLX50T-2FF665C)
- Same resource density in a pin-compatible package (vs XC5VLX50T-1FF665C)
- Commercial-temperature ordering configuration (vs XC5VLX50T-1FFG665I)
- Closest identified ordering alternative (vs XC5VLX50T-3FFG665C)
設計ノート
Design the power rails from the AMD power-decoupling and device-power guidance rather than estimating consumption from I/O count alone. The XC5VLX50T-3FF665C operates at 0.95 V to 1.05 V, and dynamic power can vary substantially with logic activity, clock rate, I/O state, and speed grade. Place the required high-frequency and bulk-decoupling capacitors at their designated package balls, minimize supply-loop area, and use separate return paths for high-current I/O activity. Validate the regulator capacity against worst-case startup, configuration, and full-throughput operation.
Estimate junction temperature using actual switching activity and the board thermal model. A 665-contact FCBGA can remove heat through many package balls, but the effective board-dependent thermal resistance still depends on layer count, copper area, vias, airflow, and enclosure temperature. Use the manufacturer thermal data for the selected speed grade and package rather than assuming that the -3 grade has the same dissipation as -1 or -2. Measure or simulate representative worst-case workloads, including simultaneous I/O activity, and preserve the device’s specified 0°C to 85°C junction-temperature range.
Use the official AMD Virtex-5 package device pinout files for all 665 package contacts and follow the package escape-routing guidance for the PCB stackup. Keep configuration pins, clock inputs, dedicated pins, and power balls consistent with the exact ordered MPN. Pay particular attention to ball-map differences between FF and FFG ordering suffixes before placing a cross-suffix substitute. Do not infer assignments from the generic 360-I/O device description because that description does not identify individual package-ball functions.
Apply controlled-impedance and return-path rules to every external interface, with particular attention to clocks, parallel buses, and high-fanout configuration or control networks. Match clock distribution length and topology to the timing requirements of the implemented design, and terminate unused inputs according to the device guidance. High-speed I/O performance depends on PCB loss, connector and package parasitics, clock jitter, and external circuitry, so validate interfaces with representative hardware rather than relying only on the nominal I/O count.
コンプライアンス情報
The exact device is listed as RoHS non-compliant and containing lead. REACH, halogen-free, and conflict-minerals status are not established for this MPN. AEC-Q100 is not applicable because this is a commercial-temperature FPGA rather than an automotive-qualified device.