XC7A12T-1CPG238I - 12.8K Cell Artix-7 FPGA | AMD
部品番号: XC7A12T-1CPG238I ✓ 生産中XC7A12T-1CPG238I 概要
An FPGA is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after manufacture. The Artix-7 family belongs to the FPGA and CPLD hierarchy under programmable logic devices and semiconductor ICs. This combination of configurable hardware and parallel I/O allows one physical design to support multiple protocols, control functions, signal-processing pipelines, and product revisions without changing the PCB.
The device provides 12,800 logic cells and 106 listed I/O, with an internal configuration-bit capacity of 737,280. Its -1 speed designation identifies the performance grade, while the CPG238 suffix identifies the 238-ball CSPBGA package used by the target part. The I suffix identifies the industrial temperature grade. These features make the XC7A12T-1CPG238I suitable for compact control, communications, interface, and signal-processing equipment.
Programmable logic resources can implement parallel data acquisition, state machines, protocol conversion, custom filters, and supervisory functions. Dedicated block RAM supports buffered data paths, while programmable I/O can be configured for common digital interfaces. Because the pin count and ball-grid footprint are relatively dense, power delivery, decoupling, signal integrity, and careful BGA fanout are central to successful implementation.
Typical uses include industrial monitoring, machine vision, programmable logic controllers, communications gateways, test equipment, and embedded control systems. The compact package supports designs that need more parallel processing than a microcontroller can provide but do not require the resources of a larger FPGA. Its 106 I/O can also reduce the need for external I/O expanders when the board architecture is planned around the device.
Board design should follow AMD's Artix-7 package pinout files and UG475. Place power and ground connections directly under the corresponding BGA balls, distribute supply rails through multiple vias, and provide local high-frequency decoupling. Confirm the selected configuration interface, bank voltage requirements, and clock topology against the manufacturer data before PCB release.
This page combines the exact device identifiers, package information, searchable replacement options, and engineering guidance needed to evaluate the XC7A12T-1CPG238I before schematic capture and layout.
ドロップイン代替品: XC7A12T-1CPG238I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7A12T-1CPG238I (同一形状・フットプリント) — 相違点: Package, Package Type, Speed Grade, I/O Count, Device Type.
XC7A12T-1CPG238C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A12T-2CPG238I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A12T-2CPG238C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC7A12T-1CPG238E
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7A12T-2CPG238E
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7A12T-1CPG238I 最大定格&電気的特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 12,800 cells |
| Configuration Bits | 737,280 bits |
| I/O Count | 106 I/O |
| Alternate Listed I/O Count | 112 I/O |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| パッケージ | 238-LFBGA, CSPBGA |
| Package Type | CSPBGA |
| 実装タイプ | Surface mount |
| Device Family | Artix-7 |
| Programmable Logic Type | FPGA |
| Voltage Class | 1.0 V |
XC7A12T-1CPG238I cspbga ピン配置ガイド
XC7A12T-1CPG238I (cspbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7A12T-1CPG238I.
詳細は データシート をご参照ください。
主な用途
XC7A12T-1CPG238I の用途: 6 件s: Machine Vision Camera Interface, Industrial Monitoring Controller, Programmable Logic Controller, Communications Gateway, Test and Measurement Instrument, Embedded Data Acquisition System.
Machine Vision Camera Interface
The XC7A12T-1CPG238I fits compact camera and image-acquisition modules that require parallel sensor data handling alongside control logic. Its 12,800 logic cells can implement image-data formatting, line and frame timing, exposure sequencing, and preprocessing, while 106 I/O provide substantial connectivity for image sensors, trigger signals, and configuration interfaces. The -1 speed grade should be checked against the target pixel clock and interface timing. Placing the FPGA close to the sensor can reduce trace length and improve signal integrity.
おすすめ
Industrial Monitoring Controller
The XC7A12T-1CPG238I is appropriate for industrial monitoring equipment that combines sensor conditioning, digital filtering, threshold detection, and communication control. The FPGA can execute parallel acquisition paths and deterministic state machines while its 106 I/O connect discrete sensors, relays, indicators, and field-bus transceivers. Because the target device is an industrial-temperature grade, confirm the final board temperature range and apply thermal analysis around the BGA. Programming the control paths in parallel can improve update flexibility compared with a sequential microcontroller implementation.
おすすめ
Programmable Logic Controller
The XC7A12T-1CPG238I supports compact PLC and sequencing platforms that require many parallel digital channels, deterministic timing, and configurable logic. Its 12,800 logic cells can host multiple I/O scans, interlocks, counters, motion-command logic, and communication state machines, while 106 I/O reduce the need for separate expansion logic. The design must be checked against the required I/O standards and switching rates. A -2 speed alternative may provide additional timing margin when external interfaces operate at higher frequencies.
おすすめ
Communications Gateway
The XC7A12T-1CPG238I can serve as the protocol-conversion and packet-handling core in a compact communications gateway. Programmable logic can translate between serial and parallel interfaces, assemble frames, perform filtering, and manage control traffic without relying on a separate processor for every interface. The 12,800-cell Artix-7 resource level is appropriate for modest protocol pipelines, while 106 I/O provide connections to transceivers and status controls. Validate line rates, clock domains, and transceiver I/O standards before assigning the FPGA pins.
おすすめ
Test and Measurement Instrument
The XC7A12T-1CPG238I is useful in programmable test equipment where pattern generation, acquisition, timing control, and analysis must operate concurrently. Its programmable logic can create deterministic stimulus sequences, coordinate measurements, and perform parallel data reduction, while its 106 I/O provide access to instruments and device-under-test lines. The compact 238-LFBGA/CSPBGA package helps limit board area, although careful power integrity and thermal design remain essential. The -1 speed grade must be sufficient for the selected clock and instrument timing requirements.
おすすめ
Embedded Data Acquisition System
The XC7A12T-1CPG238I fits embedded acquisition systems that must gather multiple digital channels, buffer data, and perform real-time filtering. Its 12,800 logic cells can implement parallel samplers, trigger logic, digital filters, and data-formatting pipelines, while 106 I/O provide extensive sensor and interface connectivity. Distributed block RAM can support buffering and pipeline stages, subject to the device's complete resource specification. For designs with higher clock rates or more demanding timing margins, the -2 grade offers additional performance within the same package family.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7A12T-1CPG238I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7A12T-1CPG238C | XC7A12T-2CPG238I | XC7A12T-2CPG238C | XC7A12T-1CPG238E | XC7A12T-2CPG238E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 238-LFBGA/CSPBGA | 238-LFBGA/CSPBGA | 238-LFBGA/CSPBGA | 238-LFBGA/CSPBGA | 238-LFBGA/CSPBGA | 238-LFBGA/CSPBGA |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells | 12,800 cells |
| I/O Count | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O |
| Speed Grade | -1 | -1 | -2 | -2 | -1 | -2 |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Extended | Extended |
| Configuration Bits | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits | 737,280 bits |
主な差別化要因
- Original industrial-grade -1 configuration (vs XC7A12T-1CPG238C)
- Higher timing margin within the same package family (vs XC7A12T-2CPG238I)
- Closest same-speed option with a different temperature grade (vs XC7A12T-1CPG238E)
設計ノート
Distribute every supply connection through the package's designated power balls and multiple nearby vias to minimize package inductance and supply droop. Place the required low-ESR decoupling capacitors directly between each local power ball and a continuous ground-plane reference. Use the AMD Artix-7 power and decoupling guidance to select capacitance, voltage rating, and placement rather than relying only on a generic BGA layout.
Use the CPG238 package files from AMD when defining the footprint, ball map, and component orientation. Preserve continuous ground-plane coverage under the BGA and avoid long cuts or voids that interrupt high-frequency return paths. Escape configuration, clock, and high-speed interface signals with short differential or impedance-controlled routing, and confirm the complete pin assignment against the manufacturer package documentation.
Estimated: power dissipation equals input voltage multiplied by total device current minus output-rail power. For example, a 1.8 V rail drawing 0.5 A produces 0.9 W of circuit power, but the FPGA's internal dissipation depends on its actual supply voltages, utilization, and switching activity. Measure junction-temperature rise on a representative board and use the manufacturer thermal model before establishing a maximum ambient-temperature rating.
Do not select a replacement solely from the 238-ball package designation. The XC7A12T-1CPG238C changes the temperature grade, while the -2 variants change the speed grade; either difference can affect qualification or timing. Re-run synthesis and static timing analysis, verify I/O standards and bank voltages, and confirm that the configuration mechanism and pin functions remain unchanged before releasing a substitute to production.
コンプライアンス情報
Compliance status for the exact XC7A12T-1CPG238I configuration requires confirmation from the manufacturer or current material declaration.