AMD

XC7K420T-L2FFV901E - 416,960-Cell Kintex-7 FPGA | AMD

部品番号: XC7K420T-L2FFV901E ✓ 生産中
0.9 V Vdss 900-BBGA (FCBGA) Package L2 Speed
MOQ: 1 |

XC7K420T-L2FFV901E 概要

The AMD XC7K420T-L2FFV901E is a Kintex-7 field-programmable gate array with 416,960 logic cells, 380 user I/O, and 30,060 Kb of block RAM, supplied in a 900-ball FCBGA package. Built on 28 nm CMOS technology, the device combines programmable logic, DSP48E processing resources, block RAM, high-speed serial transceivers, and general-purpose I/O in a single monolithic device. The L2 speed grade targets lower static power than the standard -2 grade and is screened to operate at reduced core voltages for lower dynamic power.

A field-programmable gate array, or FPGA, is a programmable digital integrated circuit whose logic, interconnect, and I/O behavior are configured after manufacture. FPGAs occupy the upper tier of the semiconductor hierarchy above standard cells and below application-specific integrated circuits, providing a practical balance between performance, design flexibility, and unit cost. The Kintex-7 family is positioned between lower-cost Artix-7 devices and higher-end Virtex devices.

The XC7K420T-L2FFV901E provides 32,575 configurable logic blocks according to the product listing and offers 30,060 Kb of block RAM for buffering, packet storage, and general data processing. Its 380 I/O support board-level connectivity, while the programmable logic and DSP resources allow parallel algorithms, control paths, and signal processing to be consolidated into one device. Supported high-speed connectivity includes mainstream standards such as PCIe Gen3 and 10 Gigabit Ethernet.

The L2 designation is important in power-sensitive deployments because AMD describes -2L devices as being screened for lower maximum static power and as capable of operating at lower core voltages than -2 devices. This characteristic can reduce thermal load when the design does not require the highest performance grade, although final power depends on utilization, clocking, I/O activity, and the selected I/O standards.

Typical applications include high-throughput data acquisition, industrial control and test equipment, network acceleration, radar and signal processing, high-performance computing nodes, and communications infrastructure requiring multiple high-speed transceivers. The large logic and RAM inventory also suits FPGA-based prototyping of advanced algorithms without requiring a custom ASIC.

PCB design must treat the 900-ball FCBGA as a high-density, thermally sensitive assembly. Follow the AMD Kintex-7 package pinout files and device datasheet for ball assignments, power-plane segmentation, decoupling, and via-in-pad requirements. Validate the selected speed grade against timing constraints rather than relying on nominal device-family specifications.

This page consolidates the exact part identity, package details, resource counts, drop-in family options, comparison parameters, and practical implementation guidance for engineers evaluating the XC7K420T-L2FFV901E in high-density FPGA designs.

ドロップイン代替品: XC7K420T-L2FFV901E — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC7K420T-L2FFV901E (同一形状・フットプリント) — 相違点: Configurable Logic Blocks, Logic Cells, Package, Speed Grade, User I/O.

AMD
Configurable Logic Blocks: 32,575 CLBs
Logic Cells: 416,960 cells
Package: 901-ball FCBGA, 1.000 mm pitch
比較対象 XC7K420T-L2FFV901E →

XC7K420T-2FFV901E

✅ ドロップイン ⚠️ 仕様未検証
📦 900-BBGA (FCBGA)
Same Kintex-7 resources and FFV901 footprint, but the -2 speed grade provides higher performance than the L2 grade

📋 参考代替品(カタログ未掲載)

XC7K420T-1FFV901I

✅ ドロップイン ⚠️ 仕様未検証
📦 900-BBGA (FCBGA)
Same Kintex-7 resources and FFV901 footprint, but the -1 speed grade has less performance margin than the L2 grade

📋 参考代替品(カタログ未掲載)

XC7K420T-2FFV901I

✅ ドロップイン ⚠️ 仕様未検証
📦 900-BBGA (FCBGA)
Same Kintex-7 resources and FFV901 footprint, but the standard -2 grade trades lower L2 power characteristics for higher performance

📋 参考代替品(カタログ未掲載)

XC7K420T-L1FFV901I

✅ ドロップイン ⚠️ 仕様未検証
📦 900-BBGA (FCBGA)
Same Kintex-7 resources and FFV901 footprint, but the L1 grade has a lower speed target than the L2 grade

📋 参考代替品(カタログ未掲載)

XC7K420T-2FFV901C

✅ ドロップイン ⚠️ 仕様未検証
📦 900-BBGA (FCBGA)
Same Kintex-7 resources and FFV901 footprint, but the standard -2 commercial-temperature grade differs from L2 power behavior

📋 参考代替品(カタログ未掲載)

XC7K420T-L2FFV901E 最大定格&電気的特性

Device Type Kintex-7 field-programmable gate array
Logic Cells 416,960
Configurable Logic Blocks 32,575
Block RAM 30,060 Kb
User I/O 380
パッケージ 900-BBGA (FCBGA)
Process Technology 28 nm CMOS
Speed Grade L2
Nominal Core Supply 0.9 V
Core Supply Range 0.87 V to 0.93 V
最大クロック周波数 1286 MHz
Device Series Kintex-7
High-Speed Serial Support PCIe Gen3 and 10 Gigabit Ethernet
実装タイプ Surface mount

XC7K420T-L2FFV901E 900-bbga (fcbga) ピン配置ガイド

XC7K420T-L2FFV901E (900-bbga (fcbga) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC7K420T-L2FFV901E の 900-bbga (fcbga) パッケージピン配置図

詳細なピン配置データはありません: XC7K420T-L2FFV901E.

詳細は データシート をご参照ください。

主な用途

XC7K420T-L2FFV901E の用途: 6 件s: High-Speed Data Acquisition, Industrial Test and Measurement, Radar and Signal Processing, Network Acceleration, Aerospace Prototyping and Reconfigurable Processing, High-Performance Computing Nodes.

📡

High-Speed Data Acquisition

The XC7K420T-L2FFV901E fits parallel and high-lane-count acquisition systems because it provides 416,960 logic cells, 30,060 Kb of block RAM, and 380 user I/O in one 28 nm Kintex-7 device. Parallel ADC channels can be digitized, filtered, and buffered without transferring every sample to an external processor. Using the L2 grade can limit static and dynamic power relative to the standard -2 grade when timing permits. The principal trade-off is routing complexity: a 900-ball FCBGA requires exact AMD package-file routing, close decoupling, and signal-integrity verification at the target clock and data rates.

🏭

Industrial Test and Measurement

For automated test equipment, the XC7K420T-L2FFV901E combines extensive programmable logic with 30,060 Kb of block RAM for pattern generation, real-time analysis, and acquisition buffering. Instrument-control logic can share the FPGA with DSP pipelines, reducing the need for multiple devices and improving timing coherence between acquisition and processing. The L2 grade is attractive when enclosure temperature and fanless cooling constrain the power budget. Validate the selected package variant and environmental rating, then budget decoupling, power-plane segmentation, and thermal spreading across the full 900-ball footprint.

🌐

Radar and Signal Processing

The XC7K420T-L2FFV901E supports radar and communications signal-processing designs that require parallel arithmetic, high logic density, and substantial on-chip buffering. Its 416,960 logic cells can host multiple concurrent pipelines, while 30,060 Kb of block RAM supports sample queues, correlation buffers, and packet staging. The 28 nm Kintex-7 architecture also supports high-speed serial standards such as 10 Gigabit Ethernet for external data transfer. The L2 grade helps when the system has a strict thermal envelope, provided post-layout timing confirms that the lower-power target still satisfies the required clock rate.

🌐

Network Acceleration

Network functions benefit from the XC7K420T-L2FFV901E combination of 416,960 logic cells, large block RAM, and high-speed serial connectivity. Protocol termination, packet classification, queues, hashing, encryption, and traffic shaping can be consolidated into a single programmable device, reducing external memory and processor overhead. AMD identifies PCIe Gen3 and 10 Gigabit Ethernet among the mainstream standards supported by the Kintex-7 family. The L2 speed grade is appropriate for power-constrained appliances when it meets timing, while the standard -2 grade should be selected when maximum performance margin is more important than minimum power.

✈️

Aerospace Prototyping and Reconfigurable Processing

The XC7K420T-L2FFV901E can support FPGA-based prototyping of aerospace, defense, and high-performance embedded algorithms where changing logic is more valuable than committing the design to an ASIC. Programmable resources allow rapid updates to navigation, communications, or signal-processing functions, while 30,060 Kb of block RAM provides local storage for multi-channel data. The L2 grade is relevant for long-duration missions and thermally constrained installations because it targets lower power than the standard -2 grade. Qualification must be handled separately from generic commercial availability, using the exact orderable suffix and the applicable AMD documentation.

🖥️

High-Performance Computing Nodes

In FPGA-accelerated computing nodes, the XC7K420T-L2FFV901E can implement custom filters, compression, analytics, or storage-processing pipelines close to high-speed data sources. The 416,960-cell device supports parallelization across many logic elements, and 30,060 Kb of block RAM can provide double-buffered working sets for streaming algorithms. Its 380 I/O and high-speed serial support enable integration into multi-device nodes rather than isolated laboratory systems. The L2 grade should be evaluated for sustained-utilization workloads where reduced power improves rack-level efficiency, but it must be paired with thermal analysis for the 900-ball FCBGA and a complete power-delivery design.

What is the AMD XC7K420T-L2FFV901E?
The AMD XC7K420T-L2FFV901E is a Kintex-7 field-programmable gate array with 416,960 logic cells, 380 I/O, and 30,060 Kb of block RAM. It uses 28 nm CMOS technology and is supplied in a 900-ball FCBGA package. The L2 grade is screened for lower maximum static power and lower core-voltage operation than the standard -2 grade.
What are the key specifications of XC7K420T-L2FFV901E that engineers should know?
The principal XC7K420T-L2FFV901E specifications are 416,960 logic cells, 32,575 configurable logic blocks, 30,060 Kb of block RAM, and 380 user I/O. The device is built on 28 nm CMOS, uses the L2 speed grade, and comes in a 900-ball FCBGA. AMD lists a maximum clock frequency of 1286 MHz for the closely identified device configuration.
Where can I download the XC7K420T-L2FFV901E datasheet PDF?
The AMD XC7K420T datasheet PDF is available through the manufacturer documentation linked on this page, while the Alldatasheet XC7K420T entry provides an additional copy and specifications index. Search for the full orderable MPN XC7K420T-L2FFV901E when ordering or downloading, since the datasheet covers multiple speed grades, package options, and orderable part numbers.
Where can I find the XC7K420T-L2FFV901E pinout and ball assignments?
The authoritative ball assignments are distributed through the AMD Kintex-7 Package Device Pinout Files, which also describe the ASCII package-file format. Use those package files for PCB layout and cross-check them against the selected device and package variant. The 900-ball footprint requires a full package file rather than a simplified schematic-level pin summary.
What can replace the XC7K420T-L2FFV901E?
The closest same-family replacements are other XC7K420T devices that use the FFV901 package, including the -1, -2, and L1 speed-grade variants. These retain the 416,960-cell Kintex-7 architecture and 380-I/O package arrangement, but their speed, power, temperature, and qualification attributes differ. Verify timing closure, power limits, and procurement requirements before substitution.
Is XC7K420T-2FFV901E a drop-in replacement for XC7K420T-L2FFV901E?
XC7K420T-2FFV901E is pin-compatible with XC7K420T-L2FFV901E at the FFV901 package level and provides the same Kintex-7 device resources. The principal difference is the speed and power grade: the standard -2 device targets higher performance, while the L2 grade is screened for lower static power and lower core-voltage operation. Timing and thermal budgets must be revalidated.
When should I choose the L2 grade over the standard -2 Kintex-7 grade?
Choose the L2 grade when the design must meet its timing targets without relying on the maximum performance of the standard -2 grade and lower static or dynamic power is valuable. Choose the -2 grade when the design requires more timing margin or the highest available performance for that device family. The choice should be based on post-layout timing and power analysis.
XC7K420T-L2FFV901E vs XC7K420T-2FFV901E - which is better?
The L2 version is generally preferable for power-sensitive designs that can meet timing with the lower-power grade, while the standard -2 version is preferable when performance margin is the priority. Both use the Kintex-7 architecture and FFV901 package, with 416,960 logic cells, 30,060 Kb of block RAM, and 380 I/O. Your post-route timing report should decide the grade.
What is the difference between XC7K420T-L2FFV901E and XC7K420T-1FFV901I?
Both parts are Kintex-7 devices in the FFV901 package, but their speed, power, and ordering suffixes differ. The L2 part is the lower-power L2 grade, while the -1 part uses the standard -1 speed grade and an industrial-temperature ordering suffix. They are not automatically equivalent in timing or temperature capability, so both must be checked against the design requirements.
Is XC7K420T-L2FFV901E suitable for industrial control and test systems?
The XC7K420T-L2FFV901E is well suited to industrial control, test, and instrumentation systems that benefit from 416,960 logic cells, 30,060 Kb of block RAM, and 380 I/O. Its lower-power L2 grade can help control thermal load in densely utilized designs. The exact operating-temperature rating must be confirmed from the orderable-part documentation before environmental qualification.
What is the best AMD Kintex-7 equivalent for XC7K420T-L2FFV901E?
The best same-package equivalent is XC7K420T-2FFV901E when the design needs more performance margin, or XC7K420T-1FFV901I when the standard -1 speed grade is sufficient. Both preserve the XC7K420T FFV901 package and resource count. No cross-manufacturer drop-in replacement was established, since FPGA package, configuration, power, and pin compatibility are device-specific.
Can XC7K420T-L2FFV901E be used for high-speed data acquisition?
Yes, the XC7K420T-L2FFV901E can implement high-speed data-acquisition pipelines because it combines programmable logic, 380 I/O, and 30,060 Kb of block RAM in one device. Use the on-chip DSP and block RAM for parallel filtering or buffering, and select I/O standards and clocking schemes that satisfy the target data rate. Signal-integrity verification remains essential at high data rates.
How many DSP48E resources are available in XC7K420T-L2FFV901E?
The exact DSP48E count for XC7K420T-L2FFV901E is not stated in the part listing, so consult the XC7K420T device resource table before assigning filter or DSP pipelines. The confirmed resources are 416,960 logic cells, 32,575 configurable logic blocks, 30,060 Kb of block RAM, and 380 I/O. Do not estimate the DSP count from the logic-cell figure.
Where to buy XC7K420T-L2FFV901E online?
Use the Request a Quote form on this page to request XC7K420T-L2FFV901E availability, lead time, and a formal quotation. Confirm that the quotation identifies the exact FFV901 package, L2 speed grade, and orderable suffix. Because this is a high-pin-count FPGA, supply quantity and schedule should be stated when submitting the request.
What is the price and lead time for XC7K420T-L2FFV901E?
Current commercial terms for XC7K420T-L2FFV901E should be obtained through the Request a Quote form on this page. Include the required quantity, target date, and packaging preference in the request so the supplier can confirm allocation and lead time. The exact suffix, FFV901 package, and L2 speed grade should remain unchanged in the purchase order.
How should the XC7K420T-L2FFV901E 900-ball FCBGA be laid out?
Lay out the XC7K420T-L2FFV901E using the AMD Kintex-7 package pinout files and the device power guidelines. Follow the prescribed BGA escape routing, via-in-pad or fanout structure, decoupling placement, and power-plane connectivity. Do not derive the 900-ball layout from a generic BGA symbol, because FFV901 ball assignments and power groupings are device-specific.

エンジニアリング参考データ: XC7K420T-L2FFV901E — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Select the XC7K420T-L2FFV901E when the design needs the full 416,960 logic cells and 30,060 Kb of block RAM of the Kintex-7 XC7K420T device, operates in the FFV901 900-ball package, and benefits from the lower-power L2 grade. Choose XC7K420T-2FFV901E when timing closure requires the standard -2 performance margin rather than the L2 power characteristics. Choose XC7K420T-1FFV901I or XC7K420T-L1FFV901I when the design can meet timing at a lower speed target. These family members preserve package compatibility, so they can simplify sourcing or qualification planning, but the speed grade, temperature suffix, timing margin, and thermal budget still require verification. Do not substitute a different package suffix without a PCB redesign, and confirm the exact operating-temperature and qualification requirements before production release.

代替品との比較

パラメータ この製品 XC7K420T-2FFV901E XC7K420T-1FFV901I XC7K420T-2FFV901I XC7K420T-L1FFV901I XC7K420T-2FFV901C
Brand AMD AMD AMD AMD AMD AMD
Package 900-BBGA (FCBGA) 900-BBGA (FCBGA) 900-BBGA (FCBGA) 900-BBGA (FCBGA) 900-BBGA (FCBGA) 900-BBGA (FCBGA)
Device Series Kintex-7 XC7K420T Kintex-7 XC7K420T Kintex-7 XC7K420T Kintex-7 XC7K420T Kintex-7 XC7K420T Kintex-7 XC7K420T
Logic Cells 416,960 416,960 416,960 416,960 416,960 416,960
Block RAM 30,060 Kb 30,060 Kb 30,060 Kb 30,060 Kb 30,060 Kb 30,060 Kb
User I/O 380 380 380 380 380 380
Speed Grade L2 -2 -1 -2 L1 -2
Process Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS
Power Characterization L2 grade screened for lower maximum static power Standard -2 performance grade Standard -1 performance grade Standard -2 performance grade L1 lower-power grade Standard -2 performance grade

主な差別化要因

  • Lower-power L2 characterization within the XC7K420T family (vs XC7K420T-2FFV901E)
  • Full-scale Kintex-7 resource allocation in a 380-I/O package (vs XC7A100T-2FGG484C)
  • Higher performance target than the lower-speed family grades (vs XC7K420T-L1FFV901I)

設計ノート

Use the AMD XC7K420T datasheet and power-estimation workflow to partition the 28 nm Kintex-7 core and I/O supplies. The L2 grade is screened for lower maximum static power and can operate at lower core voltages than the -2 grade, so verify each rail against the design's utilization and state conditions. Decoupling values and power-plane geometry must come from the manufacturer package guidelines rather than a generic BGA layout.

Route the 900-ball FCBGA from the official Kintex-7 package pinout files. Preserve the prescribed ball escapes, via structures, decoupling placement, and power-plane segmentation, and cross-check every ball against the selected FFV901 orderable part. Because the package has 900 contacts and multiple voltage domains, even a small pin-map error can produce an unbootstrappable or thermally stressed assembly.

Estimate full-chip power using the device utilization report generated by the implementation flow, then combine it with board-level thermal resistance and the final enclosure temperature. The L2 grade may reduce the heat load relative to -2, but it does not eliminate thermal design work. Distribute heat across the BGA and follow the AMD guidance for vias, copper planes, and heat-spreading structures.

Do not treat a Kintex-7 family member with a different package suffix as an automatic drop-in replacement. The XC7K420T alternatives listed here retain the FFV901 package, but speed grade, power behavior, and temperature suffix can still change timing and qualification results. Run post-route timing, verify the configuration bitstream against the exact device, and reconfirm power and operating-temperature requirements before releasing production hardware.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The Kintex-7 family documentation is available from AMD, but exact compliance attributes for the XC7K420T-L2FFV901E orderable part were not stated in the retrieved product listings.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc7k420t 2ffg1156i xc7k420t 2ffg901i XC7K420T-L2FFV901E datasheet XC7K420T-L2FFV901E pinout XC7K420T-L2FFV901E specifications AMD XC7K420T-L2FFV901E XC7K420T FFV901 package pinout XC7K420T-L2FFV901E equivalent XC7K420T-L2FFV901E replacement XC7K420T-L2FFV901E vs XC7K420T-2FFV901E Kintex-7 900 BBGA FPGA XC7K420T-L2FFV901E application circuit

関連部品&用語

AMD Xilinx Kintex-7 XC7K420T XC7K420T-L2FFV901E XC7K420T-2FFV901E XC7K420T-1FFV901I XC7K420T-2FFV901I XC7K420T-L1FFV901I XC7K420T-2FFV901C FPGA field-programmable gate array logic cell configurable logic block block RAM DSP48E 28 nm CMOS L2 speed grade 900-ball FCBGA BGA package surface-mount semiconductor PCIe Gen3 10 Gigabit Ethernet Vivado Design Suite UG475
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示