XMC4800F144K2048AA - 144MHz Cortex-M4 MCU | Infineon
部品番号: XMC4800F144K2048AA ✓ 生産中XMC4800F144K2048AA 概要
An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARMv7E-M architecture family and commonly integrates peripherals, memory interfaces, and real-time control functions. Microcontrollers sit within the broader semiconductor hierarchy and are widely used as the central controller in industrial automation, networking equipment, motor-control systems, and connected embedded products. The XMC4800 specifically targets industrial and energy-efficient real-time applications.
The XMC4800's headline characteristics are its 144 MHz Cortex-M4 operating frequency, 2048 kB flash configuration, and 10/100 Mbit/s Ethernet interface. Its flash capacity provides room for application code, networking stacks, and EtherCAT-related software, while the Ethernet interface allows direct connection to industrial networks without requiring a separate controller. Distributor records identify a 12-bit conversion feature and an operating temperature range of -40°C to +125°C.
The device belongs to Infineon's XMC4000 family and is presented as an industrial microcontroller with DSP and FPU capabilities in the family documentation. This combination is relevant to industrial controls that must execute control algorithms, communicate over Ethernet, and maintain deterministic timing. The verified distributor listing identifies the component as a 32-bit Cortex-M4 MCU with 2 MB of flash in an LQFP-144-24 package.
Typical applications include EtherCAT industrial nodes, factory automation controllers, industrial Ethernet equipment, real-time motor-control platforms, and connected sensor systems. In these systems, the XMC4800 can manage application processing and network communication within one package. Its 144 MHz Cortex-M4 core and integrated Ethernet connectivity reduce the need for separate processing and communication components when board area and integration are priorities.
Designers should verify the complete pin assignment, peripheral availability, power requirements, clock configuration, and package details in the manufacturer datasheet before layout. Because this 144-pin LQFP device offers many mixed-signal and interface functions, careful partitioning of power, Ethernet, clock, and debugging nets is important. The complete 144-pin electrical pinout was not included in the supplied verified data and therefore must not be inferred from generic XMC4000 documentation.
This page consolidates the verified manufacturer and distributor information, separates known XMC4800 characteristics from missing electrical details, and documents drop-in ordering-code candidates without presenting unverifiable substitutions. It also provides application guidance, comparison parameters, and sourcing considerations for engineers evaluating the XMC4800F144K2048AA.
ドロップイン代替品: XMC4800F144K2048AA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XMC4800-F144K2048-AA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XMC4800F144K2048AAXQMA1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XMC4800F144K2048AA 最大定格＆電気的特性
| Manufacturer | Infineon Technologies |
| Product Type | Industrial 32-bit microcontroller |
| Processor Core | ARM Cortex-M4 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 144 MHz |
| Flash Memory | 2048 kB |
| Flash Organization | 2M x 8 bits |
| Ethernet Speed | 10/100 Mbit/s |
| ADC Resolution | 12 bit |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | PG-LQFP-144-24 |
| ピン数 | 144 pins |
| 実装タイプ | Surface mount |
| Product Family | XMC4000 |
| Industrial Positioning | Industrial |
| EtherCAT Support | XMC4800 EtherCAT node |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +125°C |
XMC4800F144K2048AA pg-lqfp-144-24 ピン配置ガイド
XMC4800F144K2048AA (pg-lqfp-144-24 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XMC4800F144K2048AA.
詳細は データシート をご参照ください。
主な用途
XMC4800F144K2048AA の用途: 6 件s: EtherCAT Industrial Nodes, Industrial Ethernet Controllers, Factory Automation Equipment, Real-Time Motor Control, Connected Sensor Systems, Industrial Gateway Equipment.
EtherCAT Industrial Nodes
The XMC4800F144K2048AA fits EtherCAT industrial nodes because it combines a 144 MHz 32-bit Cortex-M4 core with 2048 kB of flash and integrated 10/100 Mbit/s Ethernet. The manufacturer identifies the XMC4800 as an EtherCAT node device, allowing real-time control and communication software to share one processor. In a typical node, the MCU executes the EtherCAT stack and application logic while the Ethernet interface handles network traffic. The 2048 kB flash capacity provides room for protocol code, configuration, and diagnostics, although final memory use must be verified against the selected firmware.
おすすめ
Industrial Ethernet Controllers
The XMC4800F144K2048AA is suitable for industrial Ethernet controllers that need local control and network connectivity without a separate Ethernet interface device. Its 144 MHz Cortex-M4 core provides processing for protocols, supervisory logic, and real-time tasks, while 10/100 Mbit/s Ethernet supports factory-network communication. The 144-pin LQFP package provides access to the family’s mixed peripheral and interface resources. Board-level Ethernet implementation still requires the manufacturer-recommended PHY, magnetic interface, isolation, filtering, and controlled-impedance layout to obtain reliable 10/100 Mbit/s performance.
おすすめ
Factory Automation Equipment
The XMC4800F144K2048AA suits factory automation equipment requiring a 144 MHz embedded controller, 2048 kB of program storage, and industrial temperature capability. Its Cortex-M4 core can execute control logic, communications, and signal-processing tasks, while the verified -40°C to +125°C range supports harsh industrial environments. The LQFP-144 package exposes a large pin count for peripherals and board-level connections. System designers should segregate Ethernet, power, clock, and debug routing and confirm unused-pin and termination requirements against the exact manufacturer pin table.
おすすめ
Real-Time Motor Control
The XMC4800F144K2048AA can serve as the control processor in real-time motor-control equipment where communication and deterministic execution are both important. Its 144 MHz 32-bit Cortex-M4 core provides computational capacity for control algorithms, while 2048 kB of flash can hold motor-control and network software. The integrated 10/100 Mbit/s Ethernet interface allows the controller to participate in connected industrial systems. Designers must confirm the exact PWM, capture, ADC, timer, and analog functions required by the motor drive, as these peripheral details were not included in the supplied verified records.
おすすめ
Connected Sensor Systems
The XMC4800F144K2048AA is appropriate for connected industrial sensor systems requiring local signal processing and network reporting. The 144 MHz Cortex-M4 core can process measurements and execute control functions, while the 10/100 Mbit/s Ethernet interface provides a direct industrial-network path. Its 2048 kB flash configuration supports embedded firmware and configuration data. A practical design should use the verified 12-bit conversion capability only after confirming the complete ADC electrical characteristics, input range, sampling performance, and acquisition sequence from the exact XMC4800 datasheet.
おすすめ
Industrial Gateway Equipment
The XMC4800F144K2048AA fits industrial gateway equipment that combines protocol handling, real-time control, and Ethernet connectivity. Its 144 MHz Cortex-M4 core can manage gateway logic and device protocols, while the 2048 kB flash provides room for firmware stacks and local configuration. Integrated 10/100 Mbit/s Ethernet avoids requiring a separate network controller for the primary industrial link. The 144-pin package also supports board partitioning, although the exact exposed mixed-signal functions, power pins, and package boundaries must be verified before schematic capture and PCB layout.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XMC4800F144K2048AA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XMC4800-F144K2048-AA | XMC4800F144K2048AAXQMA1 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-24 | PG-LQFP-144-24 - same | PG-LQFP-144-24 - same |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| CPU Architecture | 32-bit | 32-bit | 32-bit |
| Maximum CPU Frequency | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 2048 kB | 2048 kB | 2 MB |
主な差別化要因
- Verified manufacturer ordering designation for the same XMC4800 configuration （vs XMC4800-F144K2048-AA)
- Distributor-listed ordering variant with the same core and flash configuration （vs XMC4800F144K2048AAXQMA1)
- Single-package industrial Ethernet integration （vs XMC4800F144K2048AAXQMA1)
設計ノート
Treat the 144-pin LQFP footprint as a mixed-signal and high-pin-count routing problem. Keep the Ethernet interface, clock supply, debug signals, and sensitive analog inputs in separate placement zones, and route the Ethernet differential pair as a controlled-impedance pair. Before committing the layout, obtain the exact XMC4800-F144K2048-AA land pattern and pin table; using a generic 144-pin LQFP footprint without checking pad, pin, and thermal details can create an unmanufacturable board.
Design the supply network around the exact manufacturer's power, ground, and decoupling recommendations. Place bulk and high-frequency decoupling capacitance at the associated device pins, provide a low-impedance ground reference, and isolate the Ethernet PHY and magnetic-interface current paths from sensitive control signals. The supplied data verifies 2048 kB of flash and the 144 MHz CPU but does not provide operating-current, quiescent-current, or absolute maximum ratings, so regulator sizing and thermal margins remain subject to the full datasheet.
Do not assume that punctuation differences or distributor suffixes make every XMC4800 ordering code electrically and commercially interchangeable. Compare the complete Infineon order code, package marking, temperature range, qualification status, flash configuration, firmware revision, and errata. In particular, XMC4800-F144K2048-AA and XMC4800F144K2048AAXQMA1 are verified candidates, but the available data does not expose all suffix-specific attributes. Obtain the manufacturer ordering information before approving a substitution.
コンプライアンス情報
The supplied verified product results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. These fields remain unknown rather than inferred from the manufacturer or package.
