Z8673312SSC - 8-Bit 12MHz 8KB OTP MCU | Zilog
部品番号: Z8673312SSC ✓ 生産中Z8673312SSC 概要
An 8-bit microcontroller is a programmable semiconductor that executes instructions from an embedded program memory and interacts with external circuitry through digital input and output pins. Within the product hierarchy, the Z8673312SSC belongs to the Z8 microcontroller family, which falls under 8-bit microcontrollers, embedded processors, and semiconductor devices. Its one-time-programmable memory is suited to control logic, fixed-configuration products, and compact automation systems where firmware does not need field updates.
The principal device characteristics are a 12 MHz maximum clock frequency, 8 KB of OTPROM organized as 8K x 8, an 8-bit processor architecture, and a 28-pin SOIC package. These values place the device between simple fixed-function controllers and more resource-intensive general-purpose microcontrollers. The SOIC-28 package supports conventional surface-mount assembly while offering a moderate pin count for digital control, sensing inputs, actuator outputs, and communication interfaces.
Program memory is permanently configured after programming, making accidental firmware changes less likely than with rewritable memory. This characteristic can simplify controlled manufacturing and reduce the need for external memory protection circuitry. The 12 MHz operating frequency provides additional instruction throughput for responsive control loops, event handling, and peripheral servicing, while the 8-bit architecture keeps the device suitable for compact embedded systems where higher processing capacity would add unnecessary cost or complexity.
Typical uses include industrial control modules, fixed-function instruments, appliance controllers, building equipment, sensor-conditioning systems, and compact embedded products. A production design should confirm the complete pin assignments, electrical limits, oscillator requirements, and peripheral resources against the Zilog manufacturer datasheet before schematic capture. OTP programming also requires a controlled programming fixture and verification process so firmware is written correctly before the component enters assembly.
For PCB layout, route the oscillator and decoupling paths according to the manufacturer application guidance and keep sensitive timing traces away from fast-switching nodes. Place input and output decoupling capacitors close to their associated supply pins, inspect all exposed programming and unused pins, and validate operation across the intended voltage, temperature, and clock conditions. This page combines the confirmed device identity with practical selection guidance, compatible-package alternatives, and design-oriented implementation notes.
ドロップイン代替品: Z8673312SSC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z8673312SSC (同一形状・フットプリント) — 相違点: Package Type, Program Memory Size, Program Memory Type.
Z8673312SSG
✅ ドロップイン価格はお問い合わせください
データシートを見る →Z8673312ESG
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z8673312ASG
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z8673312SSC 最大定格&電気的特性
| Product Type | 8-bit Z8 microcontroller |
| Maximum CPU Frequency | 12 MHz |
| Program Memory Type | OTP ROM |
| Program Memory Size | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| Processor Architecture | 8-bit |
| Microcontroller Family | Z8 |
| Package Type | SOIC-28 |
| ピン数 | 28 pins |
| Package Width | 7.50 mm |
| Package Body Length | 0.295 inch |
| 実装タイプ | Surface mount |
Z8673312SSC 0.295 inch ピン配置ガイド
Z8673312SSC (0.295 inch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z8673312SSC.
詳細は データシート をご参照ください。
主な用途
Z8673312SSC の用途: 6 件s: Industrial Control Modules, Fixed-Function Instrument Control, Appliance and Equipment Controllers, Sensor Conditioning and Data Acquisition, Building and Environmental Equipment, Programmable Logic and Interface Products.
Industrial Control Modules
The Z8673312SSC fits compact industrial control modules that execute permanent sequencing logic for actuators, interlocks, and status indicators. Its 12 MHz Z8 processor provides enough cycle rate for responsive event handling, while 8 KB of OTPROM gives each unit a fixed control program that resists accidental changes after commissioning. The 28-pin SOIC package supports conventional surface-mount assembly and leaves pins for digital inputs, outputs, and communication functions. Because OTP programming cannot be reversed, production should include code verification and programmed-device testing before soldering.
おすすめ
Fixed-Function Instrument Control
The Z8673312SSC is appropriate for fixed-function instruments in which calibration, measurement sequencing, and user-interface logic are stored in permanent firmware. A 12 MHz operating rate supports timely polling and control updates, while 8 KB of OTPROM can hold a compact application program without external program memory. The SOIC-28 format is useful where medium pin density and automated assembly are needed. Engineering teams should allocate I/O pins only after checking the manufacturer pin descriptions and define a programming fixture that verifies the final code before the OTP devices enter production.
おすすめ
Appliance and Equipment Controllers
The Z8673312SSC can serve as the primary controller in an appliance or equipment module whose operating program remains unchanged for the product's life. Its 8-bit architecture and 8 KB OTPROM are aligned with fixed logic involving switches, relays, sensors, and state indicators, while the 12 MHz clock allows the firmware to combine input scanning with control sequencing. The 28-pin SOIC package provides a practical surface-mount assembly option. Designers should budget decoupling correctly and reserve programming access for factory test, since firmware corrections require replacement rather than an in-field rewrite.
おすすめ
Sensor Conditioning and Data Acquisition
The Z8673312SSC is suitable for compact sensor-conditioning and acquisition modules that perform local filtering, threshold decisions, and digital control. The 12 MHz processor supports deterministic sampling and signal-processing routines, and the 8 KB OTPROM can retain a fixed algorithm and calibration configuration. Its SOIC-28 package can be placed on a small controller board with digital sensor inputs and processed outputs. Analog front-end design remains separate from the MCU, so grounding, reference voltage, and input protection require normal analog-layout discipline.
おすすめ
Building and Environmental Equipment
The Z8673312SSC can implement embedded logic for building equipment, environmental controllers, and small motorized systems where a fixed program manages sensors and outputs. The 28-pin SOIC package offers enough connections for typical digital peripheral needs, while the 12 MHz Z8 core provides responsive task execution without a larger processor. OTPROM is advantageous when configuration integrity is more important than field updates. For fan, pump, or relay systems, add appropriate driver isolation, flyback protection, and fault handling because the microcontroller itself does not directly provide power-stage isolation.
おすすめ
Programmable Logic and Interface Products
The Z8673312SSC fits permanent-function logic products that combine input decoding, state machines, output sequencing, and simple interface protocols. Its 8 KB OTPROM provides a defined code footprint, and the 12 MHz clock supports responsive protocol handling in compact products. The 28-pin SOIC package can be used in a controller section of a larger board where surface-mount assembly and moderate I/O density are priorities. Final protocol timing, available port functions, and pin multiplexing must be confirmed in the Zilog manufacturer documentation before the I/O allocation is frozen.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z8673312SSC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z8673312SSG | Z8673312ESG | Z8673312ASG |
|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog |
| Package | SOIC-28 | SOIC-28 | SOIC-28 | SOIC-28 |
| Processor Architecture | 8-bit | 8-bit | 8-bit | 8-bit |
| Maximum CPU Frequency | 12 MHz | 12 MHz | 12 MHz | 12 MHz |
| Program Memory | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM | 8 KB OTPROM |
| Program Memory Organization | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits | 8K x 8 bits |
| Microcontroller Family | Z8 | Z8 | Z8 | Z8 |
| Ordering Suffix | SSC | SSG | ESG | ASG |
| Special Feature | One-time-programmable firmware | One-time-programmable firmware | One-time-programmable firmware | One-time-programmable firmware |
| Pin-to-Pin Compatibility | Reference device | Directly documented as completely replaceable | Same-family drop-in configuration; verify exact suffix | Same-family drop-in configuration; verify exact suffix |
主な差別化要因
- Directly documented replacement path (vs Z8673312SSG)
- Permanent firmware configuration (vs Z8673312ESG)
- Compact 28-pin surface-mount footprint (vs Z8673312ASG)
設計ノート
Treat OTP programming as a one-time manufacturing step. Use a fixture that enforces the correct programming voltage, clock sequence, and device selection, then read back or functionally verify the program before release. Because Z8673312SSC memory cannot be erased and rewritten, an incorrectly programmed unit must be replaced. Maintain program revision traceability for every production lot.
Assign all 28 pins from the Zilog manufacturer pin-description table before schematic capture. Confirm pin 1 orientation, supply and ground locations, oscillator connections, programming access, and the treatment of unused inputs. Place decoupling capacitors close to the associated pins and use the manufacturer reference layout for decoupling values and placement rather than estimating values from the CPU frequency alone.
Keep the 12 MHz oscillator path short, symmetrical, and isolated from high-current switching nodes. Route oscillator signals away from relay-coil, motor, and power-converter traces, and place its specified load components at their datasheet-defined positions. If the board combines analog sensing with digital control, maintain a deliberate separation between sensitive sensor returns and digital timing or switching paths.
Size the supply path for the external load as well as the microcontroller because the Z8673312SSC itself is not a power-conversion device. Confirm the allowed input range, current consumption, and power dissipation in the manufacturer datasheet before adding regulators or bulk capacitance. Keep the 28-pin SOIC power and ground connections compact, and avoid routing return current through long shared paths shared with switching loads.
コンプライアンス情報
The manufacturer documentation should be checked for the exact suffix's environmental, material, and qualification declarations.