Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog
部品番号: Z86C9325PSG ✓ 生産中Z86C9325PSG 概要
A ROMless microcontroller is an embedded controller whose application program is stored in external memory rather than internal mask-programmable ROM. This architecture belongs to the broader hierarchy of microcontroller, embedded processor, embedded controller, and semiconductor. It is useful when firmware revisions, external memory sizing, or shared program storage are important. Zilog's Z8 family combines an 8-bit CPU with integrated peripherals intended for control, communications, and mixed external-memory designs.
Key features include a 25 MHz operating speed, 24 general-purpose I/O pins, 236 bytes of internal RAM, an internal oscillator, and serial and external-bus interfaces. The ROMless architecture allows the program-memory implementation to be selected separately from the microcontroller. Its 3 V to 5.5 V supply range supports both 3.3 V and conventional 5 V embedded systems, although designers must observe the operating limits associated with each clock and peripheral configuration.
The Z86C9325PSG architecture is organized around an 8-bit Z8 core and an external program-memory interface. EBI/EMI provides access to external devices, while UART/USART supports serial communication with sensors, host computers, and other controllers. The 24 I/O pins allow a prototype to connect digital inputs, output devices, and address or data-bus signals. Exact pin directions, interrupt behavior, and memory-interface timing should be confirmed from the manufacturer datasheet before a PCB is released.
Typical uses include industrial keypad controllers, appliance control modules, serial protocol bridges, programmable instrument interfaces, and embedded systems that benefit from externally updatable or shared program memory. Because the controller is ROMless, firmware can be stored in flash, SRAM, or another suitable external memory, allowing programmers to separate hardware configuration from application code.
The principal design consideration is the external-memory interface. Board layout should minimize trace lengths between the Z86C9325PSG and external memory, provide a stable clock and supply network, and preserve signal-integrity margins on the external bus. Power-supply decoupling and input protection should be sized for the attached memory and peripheral loads rather than assuming that the microcontroller alone determines the demand.
This product overview consolidates the verified core specifications, interface capabilities, package information, application guidance, and sourcing questions for engineers evaluating the Z86C9325PSG. It also distinguishes documented device facts from parameters that require confirmation in the manufacturer datasheet before layout or firmware deployment.
ドロップイン代替品: Z86C9325PSG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストZ86C9325PSG 最大定格＆電気的特性
| Microcontroller Type | 8-bit ROMless microcontroller |
| CPU Family | Z8 8-bit MCU |
| Maximum Core Clock | 25 MHz |
| Internal RAM | 236 x 8 bytes |
| Program Memory Architecture | ROMless with external program memory |
| General-Purpose I/O Pins | 24 I/O pins |
| Operating Voltage Range | 3 V to 5.5 V |
| External Bus Interface | EBI/EMI |
| Serial Interface | UART/USART |
| Oscillator | Internal oscillator |
| パッケージ | 40-pin DIP |
| 実装タイプ | Through-hole |
| データバス幅 | 8-bit |
| RoHS ステータス | Compliant |
Z86C9325PSG 40-pin dip ピン配置ガイド
Z86C9325PSG (40-pin dip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86C9325PSG.
詳細は データシート をご参照ください。
主な用途
Z86C9325PSG の用途: 6 件s: Programmable Appliance Controller, External-Memory Instrumentation Controller, Serial Protocol Bridge, Industrial Keypad and Panel Interface, Embedded Communication Module, Legacy Through-Hole Control Board.
Programmable Appliance Controller
The Z86C9325PSG fits a programmable appliance controller because its 8-bit Z8 core runs at 25 MHz while providing 24 general-purpose I/O pins for user controls, indicators, relays, and sensors. Its ROMless architecture allows application firmware to reside in external flash, which can simplify firmware revision and storage strategies. The 40-pin DIP package also supports through-hole prototypes and industrial control boards. Designers should partition the external program-memory interface carefully and assign the I/O pins according to the manufacturer pin table.
External-Memory Instrumentation Controller
The Z86C9325PSG can serve as an instrumentation controller when a design separates program storage from the MCU. Its 25 MHz clock provides processing capacity for control logic, while EBI/EMI supports communication with external memory or bus-managed peripherals. The 236 x 8 bytes of internal RAM can hold working variables and interface data. For laboratory equipment, preserve signal margins on the external bus and use the 3 V to 5.5 V operating range to guide the analog and digital supply architecture.
Serial Protocol Bridge
Z86C9325PSG is suitable for a compact serial protocol bridge because the device combines a 25 MHz 8-bit core, UART/USART, 24 I/O pins, and a 40-pin DIP package. A bridge can translate commands between a host UART and external bus-managed hardware while retaining logic for status indicators or interlocks. The ROMless design allows firmware to be stored externally for easier product updates. Validate baud-rate support, electrical levels, and interface timing against the datasheet before connecting field equipment.
Industrial Keypad and Panel Interface
The 24 general-purpose I/O pins make the Z86C9325PSG practical for keypad scanning, switch inputs, status LEDs, and panel-control outputs. Its 8-bit architecture and 25 MHz operating speed can support debouncing, menu logic, and communication with a supervisory controller. Because the device is ROMless, the complete interface firmware can be maintained in external flash rather than a masked MCU variant. Confirm current capacity, timing, and pin direction before finalizing a matrix-scanning arrangement.
Embedded Communication Module
The Z86C9325PSG can act as the control core of an embedded communication module that must coordinate a UART/USART link with external memory and discrete interface devices. Its internal oscillator removes the need for an external crystal in simple designs, while EBI/EMI adds a path to external components and shared resources. The 3 V to 5.5 V range suits 3.3 V and 5 V systems. Validate clock tolerance and communication timing across temperature before using it in a long-life network appliance.
Legacy Through-Hole Control Board
The 40-pin DIP package makes the Z86C9325PSG well suited to legacy-style through-hole control boards, prototypes, and repair platforms that have not migrated to fine-pitch packages. Its 24 I/O pins, internal RAM, UART/USART, and 25 MHz core support common embedded-control functions. Because it is ROMless, the board must provide a suitable external program-memory arrangement and associated bus routing. Review signal integrity, decoupling, programming access, and unused-pin treatment in the manufacturer documentation.
エンジニアリング参考データ: Z86C9325PSG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Zilog, Inc. |
| Package | 40-pin DIP |
| Microcontroller Architecture | 8-bit Z8 ROMless MCU |
| Maximum Core Clock | 25 MHz |
| Internal RAM | 236 x 8 bytes |
| General-Purpose I/O | 24 I/O pins |
| Operating Voltage Range | 3 V to 5.5 V |
| External Bus Interface | EBI/EMI |
| Serial Interface | UART/USART |
| Oscillator | Internal oscillator |
設計ノート
Route the EBI/EMI and program-memory signals as a defined external-bus group, keeping the microcontroller and memory devices close together where practical. Maintain consistent return paths beneath the bus, avoid unnecessary stubs, and follow the timing and layout guidance in the manufacturer datasheet. The 40-pin DIP footprint provides generous spacing, but signal ordering and external-memory timing remain critical because this is a ROMless architecture.
Place supply-decoupling capacitors close to the Z86C9325PSG power and ground pins, and calculate the external-memory, I/O, and serial-interface loads separately from the MCU's own demand. The documented 3 V to 5.5 V operating range does not define every transient, voltage-drop, or peripheral operating limit. Use the datasheet's recommended network and verify the assembled rail at the MCU pins under maximum system activity.
Do not treat the ROMless Z86C9325PSG as a device containing internal application firmware. Confirm the external memory type, address capacity, bus timing, and programming workflow before committing the schematic. Also check every physical DIP position against the numbered pin drawing; mechanical fit alone does not establish electrical compatibility with another Z8 microcontroller.
Keep the internal-oscillator path and clock-related circuitry away from noisy switching nodes, relays, and high-current return paths. Although the device includes an internal oscillator, its frequency tolerance and application suitability must be checked against timing requirements. For UART/USART-connected products, separate communications return-current routing where practical and provide controlled protection for externally accessible lines.
コンプライアンス情報
RoHS compliance is identified in the Z86C9325PSG product listing. The device is a general-purpose microcontroller rather than an automotive-qualified AEC-Q100 product. Other environmental and material-compliance declarations are unknown.