Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog
部品番号: Z86E4016FEG ✓ 生産中Z86E4016FEG 概要
An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data.
The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence.
The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications.
The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB.
This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.
ドロップイン代替品: Z86E4016FEG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストZ86E4016FEG 最大定格＆電気的特性
| Microcontroller Type | 8-bit microcontroller |
| Series | Z8 |
| Program Memory Size | 4 KB (4K x 8) |
| Program Memory Type | OTP |
| RAM Size | 236 x 8 bits |
| Maximum CPU Speed | 16 MHz |
| Number of I/O Pins | 32 pins |
| Oscillator Type | Internal oscillator |
| Power-On Reset | Included |
| Watchdog Timer | Included |
| パッケージ | 44-LQFP (10 x 10 mm) |
| 実装タイプ | Surface mount |
| Total Power Dissipation Limit | 1.2 W |
Z86E4016FEG 44-lqfp (10 x 10 mm) ピン配置ガイド
Z86E4016FEG (44-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E4016FEG.
詳細は データシート をご参照ください。
主な用途
Z86E4016FEG の用途: 6 件s: Appliance Control Panel, Simple Industrial Sensor Interface, Embedded Instrumentation, Automotive Accessory Controller, Communication Interface Hub, LED Display Controller.
Appliance Control Panel
The Z86E4016FEG fits an appliance control panel because its 32 I/O pins can support key inputs, indicator outputs, and discrete sensor or actuator signals while its 16 MHz CPU handles sequential control logic. Its 4 KB OTP program memory is appropriate for a fixed, production-programmed controller, and 236 x 8 bits of RAM provides working space for state variables and short routines. The internal oscillator can reduce external clock-component count, while POR and WDT support reliable startup and recovery. Before finalization, verify the actual pin multiplexing and voltage levels for the selected display, keys, and loads in the complete 44-LQFP datasheet.
おすすめ
Simple Industrial Sensor Interface
For a compact sensor-conditioning or discrete industrial interface, the Z86E4016FEG provides 32 I/O pins and a 16 MHz clock in a 10 x 10 mm 44-LQFP package. Those resources allow a controller to read switches or digital sensors, apply debounce and filtering, and drive status or relay-control logic. The 4 KB OTP memory is suitable for stable production firmware, while the Watchdog Timer can help recover from a blocked control loop. Industrial deployment still requires verified electrical limits, temperature range, isolation strategy, and EMC validation rather than assumptions based only on the 16 MHz speed.
おすすめ
Embedded Instrumentation
The Z86E4016FEG can serve as the local controller in a small instrument that combines front-panel inputs, status indication, and data acquisition control. Its 236 x 8 bits of RAM is sufficient for buffering limited measurements and maintaining operating state, while 32 I/O pins provide flexibility for digital sensors, displays, and control outputs. The internal oscillator simplifies the base design when high timing accuracy is not required. Instrumentation designs must confirm the available timer channels, ADC or external converter interface, oscillator tolerance, and pin-level behavior from the full manufacturer documentation.
おすすめ
Automotive Accessory Controller
The Z86E4016FEG can be evaluated for low-speed accessory or body-control functions where deterministic 8-bit logic, OTP configuration, and modest I/O capacity are sufficient. Its 4 KB program memory suits a fixed control routine, 32 I/O pins can interface switches and indicators, and POR provides a defined startup state. Automotive use requires separate confirmation of AEC-Q100 qualification, operating temperature, transient immunity, supply behavior, and lifecycle status; the supplied data establishes none of those automotive requirements, so this is an engineering-fit candidate rather than a qualified recommendation.
おすすめ
Communication Interface Hub
For a compact protocol hub or interface concentrator, the Z86E4016FEG can manage status inputs and coordinate low-speed peripheral activity around its 16 MHz Z8 core. The 32 I/O pins offer room for multiple peripheral selects, interrupt inputs, and control signals, while the internal oscillator keeps the clock implementation simple. A practical design would pair the MCU with a suitable transceiver or serial controller and define fault recovery around the Watchdog Timer. Because complete UART, SPI, and interrupt capabilities are not specified in the supplied excerpts, those interfaces must be verified before architecture approval.
おすすめ
LED Display Controller
The Z86E4016FEG is suitable for a small LED or segment-display controller when the design requires moderate I/O count and deterministic refresh timing without a high-performance processor. Sixteen of the 32 I/O pins can potentially be assigned to a 16-segment display, with remaining lines available for controls, though the final allocation depends on the verified pin functions. The 16 MHz operating speed supports timed refresh logic, and OTP memory protects the final display sequence. Designers should verify drive-current capability, multiplexing functions, and timer availability before treating any pin as a display output.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E4016FEG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 44-LQFP (10 x 10 mm) |
| Brand | Zilog |
| Architecture | 8-bit Z8 microcontroller |
| Program Memory | 4 KB OTP |
| RAM | 236 x 8 bits |
| Maximum Speed | 16 MHz |
| I/O Pins | 32 |
| Clock Source | Internal oscillator |
| Power-On Reset | Included |
| Watchdog Timer | Included |
主な差別化要因
- Compact surface-mount implementation （vs Z86E4016PSG)
- Substantial I/O availability for an 8-bit controller （vs Z86E4016PEG)
- Production-oriented one-time-programmable configuration （vs Z86E4016PSG)
設計ノート
The supplied datasheet excerpt states that total package power dissipation should not exceed 1.2 W. Treat that value as an upper constraint, not a design target. Check internal regulator and I/O dissipation under the worst valid input voltage and loading condition, minimize unused-pin activity where permissible, and provide the recommended PCB copper area for the 44-LQFP. Exact junction-temperature and ambient limits remain [DATA_NEEDED: junction and ambient operating limits] and must be obtained from the complete manufacturer datasheet.
Use the manufacturer's 44-LQFP land pattern and pin-1 orientation rather than a generic LQFP footprint. Because the supplied information confirms 44 leads but does not provide the full numbered pin-function table, verify every power, ground, programming, reset, oscillator, and I/O connection before layout release. Provide unobstructed access to the programming interface, maintain adequate clearance between adjacent nets, and account for thermal-pad or exposed-area requirements if specified by the complete datasheet.
Do not assume that Z86E4016PSG or Z86E4016PEG is a drop-in substitute merely because both belong to the Z86E4016 family. The verified comparisons identify PDIP-40 packages for those parts, while the target is 44-LQFP. Also avoid designing around unverified ADC, UART, timer, interrupt, or input-voltage functions; several such details are absent from the supplied excerpts. Confirm the exact part suffix, package, memory, peripheral set, and operating limits before schematic and firmware sign-off.
Place the device so that its 32 I/O lines fan out with predictable escape routing, especially on a new design where signal assignments are not yet fixed. Keep sensitive inputs away from switching nodes and noisy return-current paths, provide short ground returns for digital signals, and follow the datasheet's recommended decoupling configuration. The internal oscillator simplifies the clock circuit, but its timing tolerance and suitability for the intended communication or control interval still require verification against the target application.
コンプライアンス情報
The supplied verified results do not provide explicit compliance declarations. AEC-Q100 status must not be assumed for this automotive-control application candidate.
