Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog
部品番号: Z86E4016PEG ✓ 生産中Z86E4016PEG 概要
A microcontroller is an integrated circuit containing a processor core, program memory, data memory, I/O ports, and embedded peripherals on one die. The Z86E4016PEG belongs to the Z8 family of 8-bit microcontrollers, a cost-effective architecture widely used for appliance control, industrial interfaces, simple instrumentation, and dedicated automation. Its CISC instruction set is designed for efficient control-oriented code and short development cycles.
The device provides 4 KB of OTP program memory, allowing firmware to be programmed once after development. Its 236 x 8 bytes of RAM provide working storage for variables, stack operations, and application data. With 32 I/O lines, the MCU can connect directly to digital sensors, switches, indicator circuits, displays, and external control devices. Integrated Power-On Reset and Watchdog Timer functions support dependable startup and recovery behavior.
The 16 MHz operating frequency provides a practical balance between processing throughput, power consumption, and design complexity for embedded control tasks. The internal oscillator eliminates the need for an external clock in applications that do not require precise timing references. The 4.5 V to 5.5 V operating range supports conventional industrial and consumer logic environments, while the 40-pin PDIP package supports conventional through-hole PCB assembly and prototyping.
Typical applications include appliance controllers, small motor-control interfaces, digital input/output modules, LED sequencing systems, temperature-control products, and industrial control boards. The 32 available I/O lines make it especially useful when multiple discrete inputs and outputs must be managed without adding another interface IC. Firmware can implement debouncing, state machines, interlocks, fault handling, and communication routines.
Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning signals. Because the program memory is OTP rather than rewriteable flash, firmware changes after programming require a different device and a complete replacement. Decoupling, grounding, and reset circuitry should follow the datasheet layout recommendations, and unused I/O pins should be assigned deliberately rather than left without a defined state.
This product page combines the Z8 microcontroller specifications, verified package and memory information, same-package replacement references, application guidance, and design considerations. It is intended to help engineers evaluate firmware fit, pin compatibility, OTP programming constraints, and PCB assembly requirements before selecting the Z86E4016PEG.
ドロップイン代替品: Z86E4016PEG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z86E4016PEG （同一形状・フットプリント） — 相違点: Data RAM Size, Product Type, Program Memory Size, Program Memory Type.
Z86E4016PEC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z86E4016PSG
✅ ドロップイン価格はお問い合わせください
データシートを見る →Z86E4016PEG 最大定格＆電気的特性
| Product Type | 8-bit Z8 CISC microcontroller |
| Program Memory Size | 4 KB (4K x 8) OTP |
| Data RAM Size | 236 x 8 bytes |
| 最大クロック周波数 | 16 MHz |
| Number of I/O Lines | 32 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Oscillator Type | Internal |
| パッケージ | 40-pin PDIP, 0.620 in (15.75 mm) |
| 実装タイプ | Through-hole |
| Core Architecture | Z8 8-bit CISC |
| Program Memory Type | One-Time Programmable (OTP) |
| Power-On Reset | Integrated |
| Watchdog Timer | Integrated Watchdog Timer (WDT) |
| Programmable OTP Options | RC oscillator, EPROM protect, auto latch disable |
| RoHS ステータス | Compliant |
| Manufacturer | Zilog |
Z86E4016PEG 40-pin pdip, 0.620 in (15.75 mm) ピン配置ガイド
Z86E4016PEG (40-pin pdip, 0.620 in (15.75 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E4016PEG.
詳細は データシート をご参照ください。
主な用途
Z86E4016PEG の用途: 6 件s: Appliance Control, Industrial Digital I/O Module, Small Motor and Relay Control, LED Sequencing and Display Control, Simple Instrumentation Front Panel, Dedicated Control and Interface Board.
Appliance Control
The Z86E4016PEG fits appliance controllers that combine many discrete inputs and outputs with modest firmware requirements. Its 16 MHz Z8 core can execute control states, timers, debouncing, and actuator sequencing, while 4 KB of OTP memory stores a finalized control program for products that do not require field firmware updates. The 32 I/O lines can connect switches, indicators, relays, and discrete sensors without a separate large I/O expander. Operation from 4.5 V to 5.5 V aligns with conventional 5 V logic, and the 40-pin PDIP package is straightforward for through-hole appliance-control boards.
おすすめ
Industrial Digital I/O Module
The Z86E4016PEG is appropriate for compact industrial digital I/O modules where each channel requires deterministic scanning rather than high-throughput computation. Thirty-two I/O lines allow the controller to read inputs, drive indicators, operate relays, and implement interlocks from one device. The internal oscillator and 4.5 V to 5.5 V operating range simplify conventional control-board designs, while Power-On Reset and Watchdog Timer support improve startup and recovery behavior. The PDIP-40 package also suits panel wiring and prototype systems where through-hole assembly and easy signal access are priorities.
おすすめ
Small Motor and Relay Control
The Z86E4016PEG can serve as the sequencing controller for small motors, relays, and solenoids when the power stage is designed separately. Its 16 MHz processing rate supports responsive state-machine control, timing, interlocks, and fault handling, while 32 I/O lines divide logically between command outputs and status inputs. The device does not directly specify motor-drive current capability, so transistor or MOSFET power stages and appropriate protection are required. Its 4.5 V to 5.5 V supply is suitable for the control side, and the OTP memory is appropriate for fixed production firmware.
おすすめ
LED Sequencing and Display Control
The Z86E4016PEG is well matched to LED sequencing, panel indication, and simple display-control boards because it combines a 16 MHz core with 32 general-purpose I/O lines. Firmware can implement timing patterns, fade effects, status annunciation, keypad scanning, and fault codes without a separate display driver. The 4 KB OTP program area is sufficient for compact, finalized control logic, while 236 bytes of RAM accommodates counters, scan buffers, and state variables. The internal oscillator removes the need for an external timing crystal when visual accuracy does not require precise absolute timing.
おすすめ
Simple Instrumentation Front Panel
The Z86E4016PEG can manage the digital front panel of a compact instrument, handling switches, status LEDs, mode selection, and discrete process inputs. Its 32 I/O lines provide substantial panel connectivity, and the 16 MHz Z8 core can scan inputs and update indicators while maintaining predictable control timing. The device also supports applications that need a small amount of local intelligence rather than a network processor. A 4.5 V to 5.5 V control rail matches many analog and sensor subsystems, and the PDIP-40 package simplifies through-hole assembly in low- to moderate-volume instruments.
おすすめ
Dedicated Control and Interface Board
The Z86E4016PEG is suitable for a dedicated interface or protocol-control board that translates between discrete signals and an embedded system. Firmware can implement framing, status tracking, handshake logic, timeout handling, and configurable I/O behavior. The 4 KB OTP memory favors products with stable, production-ready firmware, while the 16 MHz clock and 236-byte RAM support compact protocol state machines. Its 32 I/O lines reduce the need for external logic, and the through-hole 40-pin package allows straightforward construction on cost-focused controller hardware.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E4016PEG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z86E4016PEC | Z86E4016PSG |
|---|---|---|---|
| Package | 40-DIP (PDIP-40) | 40-DIP (PDIP-40) | 40-DIP (PDIP-40) |
| Brand | Zilog | Zilog | Zilog |
| Core | 8-bit Z8 CISC | 8-bit Z8 CISC | 8-bit Z8 CISC |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz |
| Program Memory | 4 KB OTP | 4 KB ROM | 4 KB ROM |
| Data RAM | 236 bytes | 236 bytes | 236 bytes |
| Number of I/O Lines | 32 | 32 | 32 |
| Operating Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Oscillator Type | Internal | Internal | Internal |
主な差別化要因
- Direct 32-line digital I/O allocation in one MCU （vs ATMEGA32-16PU)
- One-time-programmable memory for finalized production firmware （vs Z86E4016AEG)
- Documented same-package Z8 replacement path （vs Z86E4016PSG)
設計ノート
Use the manufacturer pin-description table to assign the power pins, oscillator connections, reset behavior, and I/O functions before routing the PCB. Keep the 4.5 V to 5.5 V supply connection and decoupling network close to the device, following the datasheet layout guidance. Because the PDIP package provides generous spacing between pins, maintain adequate clearance around adjacent through-hole pads and use a defined ground strategy to reduce coupling between high-current outputs and sensitive input signals.
Treat the 4 KB program memory as one-time programmable. Develop and validate firmware on a compatible development platform before programming production devices, because a programmed Z86E4016PEG cannot simply receive a field firmware update. Do not substitute Z86E4016AEG or Z86E4016ASG without engineering review: those comparisons identify an LQFP-44 package and different supply characteristics, so they do not match the PDIP-40 board footprint.
Plan unused I/O pins for stable defined states in firmware and review their electrical behavior during reset. If an unused pin controls a sensitive or high-impedance node, add the appropriate pull resistor on the PCB. For systems combining relay, motor, or lamp outputs with sensing inputs, route high-current switching paths separately from low-level signal traces and use a common or star-ground arrangement that keeps switching return currents out of sensitive signal paths.
The internal oscillator and Power-On Reset simplify the basic clock and startup network, but the application still needs a stable 4.5 V to 5.5 V supply. Confirm startup current, operating current, and any load-dependent supply variation against the design budget. If external actuators are powered from the same board, separate their switching paths from the MCU supply and add appropriate bulk and local decoupling to prevent input resets or timing disturbances during load transitions.
コンプライアンス情報
The LCSC product listing identifies the Z86E4016PEG as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the product information.
