Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog
部品番号: Z86E4312PSG ✓ 生産中Z86E4312PSG 概要
A microcontroller is a programmable control IC that integrates a CPU core, memory, I/O ports, clock circuitry, and reset functions onto one semiconductor device. The Z8 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for reading inputs, executing embedded control logic, and driving outputs. Compared with a discrete logic implementation, it reduces component count, simplifies firmware-based sequencing, and provides deterministic behavior within a defined operating range.
Key features of the Z86E4312PSG include 12 MHz maximum operation, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 40-DIP package. The 32 available I/O lines provide substantial connectivity for keypads, displays, sensors, relays, status indicators, and general-purpose digital control. The on-chip oscillator accepts a crystal, ceramic resonator, LC, RC, or external clock source, giving the designer flexibility in clocking and cost control.
The device uses the Zilog Z8 core and CMOS process technology. OTP program memory removes the need for a separate nonvolatile memory component, while internal RAM supports stack, variable, and working-data requirements. Because program memory cannot be rewritten after programming, designers should validate firmware and the complete production programming procedure before committing a device population to an assembly line.
Typical uses include appliance controllers, small motor-control boards, keyboard and panel interfaces, lighting controllers, industrial sequence modules, and dedicated embedded-control products. The 40-pin through-hole package is particularly convenient for prototypes, through-hole assembly, and designs where a socketed or manually serviced controller is preferred. The broad I/O count also suits designs that combine several discrete sensors and actuators around one central controller.
When laying out a board, place the clock components and decoupling capacitors close to their associated pins and route sensitive oscillator signals away from high-current switching nodes. Confirm that the selected oscillator source satisfies the device timing requirements and validate the complete firmware with the final clock configuration. Because the memory is one-time programmable, treat firmware validation and programming as production-gating steps rather than routine board-test activities.
ドロップイン代替品: Z86E4312PSG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
Z86E4310PSC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
Z86E4311PSC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
Z86E4312PSC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
Z86E4313PSC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
Z86E4316PSC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z86E4312PSG 最大定格＆電気的特性
| Product Type | 8-bit Microcontroller |
| Microcontroller Core | Z8 |
| 最大クロック周波数 | 12 MHz |
| Program Memory Size | 4 KB (4K x 8) |
| Program Memory Type | OTP (One-Time Programmable) |
| Data RAM Size | 236 bytes |
| データバス幅 | 8 bit |
| Number of I/O Lines | 32 |
| Supply Voltage Range | 3.5 V to 5.5 V |
| パッケージ | 40-DIP (0.620 inch, 15.75 mm) |
| 実装スタイル | Through Hole |
| Terminal Count | 40 |
| Temperature Grade | Commercial |
| Process Technology | CMOS |
| On-Chip Oscillator Sources | Crystal, ceramic resonator, LC, RC, or external clock drive |
| ADC Resolution | No ADC |
| Program Memory Rewrite | Not supported |
| RoHS Details | Reported in manufacturer product documentation |
Z86E4312PSG 40-dip (0.620 inch, 15.75 mm) ピン配置ガイド
Z86E4312PSG (40-dip (0.620 inch, 15.75 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E4312PSG.
詳細は データシート をご参照ください。
主な用途
Z86E4312PSG の用途: 6 件s: Appliance Control Module, Keyboard and Panel Interface, Small Motor and Relay Controller, Lighting and Display Sequencer, Standalone Industrial Sequence Module, Through-Hole Prototype and Legacy Control Board.
Appliance Control Module
The Z86E4312PSG suits compact appliance controllers because it combines 32 I/O lines, 4 KB of OTP program memory, and 236 bytes of RAM in a single 40-DIP device. It can operate relays, sense switch positions, drive indicator LEDs, and sequence motors from one control point. The 12 MHz Z8 core provides useful execution headroom for state machines, while OTP memory suits a product whose control firmware is fixed before shipment. Because the device has no ADC, temperature or analog-level sensing would require external components.
おすすめ
Keyboard and Panel Interface
A matrix keypad, selector switch, and status-indicator panel can be managed by the Z86E4312PSG through its 32 digital I/O lines. The 236 bytes of RAM are suitable for debounce counters, key state, menu position, and short working queues, while the 4 KB OTP area accommodates a fixed keypad-scanning and event-processing routine. Operating from 3.5 V to 5.5 V also allows integration into both legacy 5 V control boards and lower-voltage interface modules when its I/O voltage limits are respected.
おすすめ
Small Motor and Relay Controller
The Z86E4312PSG can serve as the central controller for small relays, solenoids, fans, or stepper-related sequencing circuits. Its 32 digital outputs provide enough connection density for multiple discrete actuators, while the 8-bit processor executes position, timing, and fault-handling logic at up to 12 MHz. External transistors or driver circuits are still required because the MCU pins are control signals rather than power-stage outputs. Flyback protection and supply bypassing are essential around inductive loads.
おすすめ
Lighting and Display Sequencer
The Z86E4312PSG can sequence lamps, indicators, or segmented display logic in fixed appliances and signage equipment. Its 32 I/O lines allow multiple outputs to be multiplexed or driven through external interface devices, and the 236 bytes of RAM can hold display timing and animation state. The 12 MHz clock gives the firmware adequate resolution for debouncing and timing tasks, while one-time-programmable memory supports a stable production configuration for products whose display sequence does not require field updates.
おすすめ
Standalone Industrial Sequence Module
The Z86E4312PSG is appropriate for a dedicated industrial sequence module that coordinates sensors, alarms, and actuator commands without a large communications processor. Its 32 I/O lines, 8-bit architecture, and 4 KB OTP memory support event sequencing, timeout handling, and interlocks, while the 236 bytes of RAM are sufficient for compact working-state variables. The 40-DIP package simplifies through-hole prototype construction and repair. A production design should add input conditioning, transient protection, and a validated oscillator network.
おすすめ
Through-Hole Prototype and Legacy Control Board
The Z86E4312PSG is especially convenient for prototypes, educational platforms, and legacy equipment requiring a socketed through-hole controller. A 40-DIP footprint can be installed on a perfboard or conventional through-hole PCB without fine-pitch rework, and its 32 I/O lines provide connections for switches, LEDs, sensors, and control outputs. The 3.5 V to 5.5 V supply range supports both 5 V and reduced-voltage experiments, provided every connected signal remains within the electrical limits stated in the manufacturer product specification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E4312PSG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z86E4310PSC | Z86E4311PSC | Z86E4312PSC | Z86E4313PSC | Z86E4316PSC |
|---|---|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| Package | 40-DIP | 40-DIP | 40-DIP | 40-DIP | 40-DIP | 40-DIP (0.620 inch, 15.75 mm) |
| Microcontroller Core | Z8 | Z8 | Z8 | Z8 | Z8 | Z8 |
| Program Memory Type | OTP | OTP | OTP | OTP | OTP | OTP |
| Mounting Style | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
主な差別化要因
- Combines 32 digital I/O lines with OTP program memory in a 40-DIP package （vs Z86E4312FSC)
- Documented 236-byte RAM and 12 MHz maximum clock （vs Z86E4316PSC)
- Through-hole 40-DIP construction supports prototypes and socketed assembly （vs Z86E4312PSC)
- Broad digital connectivity for multi-sensor and multi-actuator control （vs Z86E4310PSC)
設計ノート
OTP memory makes programming a one-time production event. Validate the application firmware, oscillator settings, boot behavior, and I/O assignments on an equivalent engineering device before programming production units. If a board revision changes pin usage or control timing, do not assume an already-programmed controller can be reused. Use a documented device-programming and verification procedure that records the programmed part identifier and test result.
Place the crystal or resonator, its load components, and the MCU clock pins according to the manufacturer layout guidance, with short traces and a ground reference nearby. Route clock signals away from relay, motor, and mains-switching nodes to reduce noise coupling. Because the Z86E4312PSG accepts crystal, ceramic-resonator, LC, RC, or external-clock drive, the physical arrangement and firmware timing assumptions should be selected together rather than changed independently.
Add local bypass capacitance at the supply pins and keep return-current paths short. When the MCU controls relays, solenoids, or lamps, separate noisy actuator current from sensitive control paths and provide appropriate flyback protection on inductive loads. Do not use the 32 I/O pins to power actuators directly; use suitable transistor or driver stages and verify that their switching conditions remain within the device specifications.
Use the 40-DIP package drawing in the manufacturer product specification to establish pin-1 orientation on both the PCB and the socket. Leave the pin rows accessible if the controller may be replaced for programming or repair, and avoid placing tall components where they interfere with socket access. Check every 3.5 V to 5.5 V supply-compatible input and output against the absolute-maximum and operating conditions before energizing the board.
コンプライアンス情報
RoHS details are reported in the manufacturer documentation for the Z86E4312 family. The component is a commercial-grade controller; no AEC-Q100 qualification is stated. REACH, lead-free, halogen-free, and conflict-minerals status require current manufacturer confirmation.
