ZK-WLE7000E5 - 8.647Gbps 5GHz WiFi 7 Module
部品番号: ZK-WLE7000E5 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
ZK-WLE7000E5 概要
A WiFi 7 module is a wireless-network interface that connects an embedded computer or industrial controller to a 5GHz WiFi network. In the product hierarchy, it is a wireless module, a network interface, and an embedded communications component rather than a standalone consumer router. ZK-WLE7000E5 integrates the radio, RF front end, host interface, antenna connections, and supporting firmware into one miniPCIe assembly.
The module provides up to 18dBm output per chain and supports four RF antenna connections. Its operating voltage is 3.3V, while maximum power consumption is stated as 8.5W. Commercial configurations use QCN6224 or QCN6274, and the industrial configuration uses QCN9274. The available system memory is 2Mbit serial-bus EEPROM. Operating-mode support includes access-point and station roles, allowing backhaul and client connectivity functions in suitable equipment.
The verified design data identifies support for WiFi 7, 802.11a/ax/be, PCIe 3.0, and Linux or Android driver support from mainline kernel version 5.4.213 upward. Bluetooth and Windows support are listed as unavailable. These details make the module suitable for embedded Linux systems that need a high-bandwidth 5GHz link, while also requiring careful host, antenna, power, and thermal integration.
Typical applications include enterprise wireless access points, industrial routers, cybersecurity appliances, transportation equipment, small-business networking products, and embedded backhaul systems. OFDMA and 4096-QAM can improve efficiency in dense or multi-client environments, but actual throughput depends on radio conditions, antenna implementation, host driver, channel bandwidth, and the connected WiFi 7 infrastructure.
Designers should provide the specified 3.3V supply, preserve the PCIe 3.0 interface requirements, connect all four antenna paths correctly, and plan thermal dissipation for the maximum stated 8.5W power consumption. The verified material does not provide a complete public pinout, regulatory approvals, or detailed environmental limits, so those values require confirmation from the current manufacturer documentation before production release.
This page consolidates the verified WLE7000E5 family specifications, cross-reference information, application guidance, and practical integration notes. It distinguishes the ZK-WLE7000E5 ordering code from the Compex family references while presenting the module as a pin-compatible alternative identified by the supplied cross-reference data.
ドロップイン代替品: ZK-WLE7000E5 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストZK-WLE7000E5 仕様（メーカー公開）
| Wireless Standard | WiFi 7 / 802.11be |
| Frequency Band | 5GHz single band |
| MIMO Configuration | 4×4 MU-MIMO |
| Spatial Streams | 4 |
| Maximum Data Rate | 8.647Gbps |
| Wireless Interfaces | 802.11a/ax/be |
| Host Interface | miniPCIe with PCIe 3.0 |
| Operating Voltage | 3.3V |
| Maximum Power Consumption | 8.5W |
| RF Output Power | Up to 18dBm per chain |
| Antenna Connections | 4x U.FL |
| System Memory | 2Mbit serial-bus EEPROM |
| Commercial Radio Solution | QCN6224 or QCN6274 |
| Industrial Radio Solution | QCN9274 |
| Operating Modes | Access Point and Station |
| Key Feature | Up to 4096-QAM |
| Key Feature | OFDMA |
| Linux and Android Driver Support | Mainline driver from kernel version 5.4.213 upward |
| Bluetooth Support | NA |
| Windows Support | NA |
| Module Form Factor | miniPCIe |
ZK-WLE7000E5 インターフェースとコネクタ
ZK-WLE7000E5 は、メーカーが公開している以下のインターフェースとコネクタを備えています: ワイヤレス, Bluetooth。拡張ヘッダーのピン配置、コネクタのピン番号、電気的制限はメーカーのドキュメントで定義されています。
| ワイヤレス | WiFi 7 / 802.11be |
| Bluetooth | NA |
詳細は メーカー資料 をご参照ください（拡張ヘッダーのピン配置とコネクタのピン番号の詳細）。
電力・熱特性
| 消費電力 | 8.5W |
メーカーが公開している ZK-WLE7000E5 の電力入力および熱パラメータ。
主な用途
ZK-WLE7000E5 の用途: 6 件s: Enterprise Wireless Access Point, Industrial Router, Cybersecurity Appliance, Transportation Connectivity, Enterprise Backhaul, Small-Business Networking Appliance.
Enterprise Wireless Access Point
ZK-WLE7000E5 fits an enterprise 5GHz access-point design that needs high aggregate throughput and multi-client radio efficiency. Its 4×4 MU-MIMO configuration provides four spatial streams, while the stated maximum rate of 8.647Gbps creates headroom for WiFi 7 clients. The module can operate in access-point or station roles according to the supplied product data. Place it in a carrier board with PCIe 3.0 support, four 5GHz antenna paths, and a 3.3V supply capable of the stated 8.5W maximum. OFDMA and 4096-QAM may improve utilization in dense deployments, but real client throughput depends on channel conditions, antenna isolation, firmware, and the host processor.
おすすめ
Industrial Router
ZK-WLE7000E5 is suitable for an industrial router that needs a high-speed 5GHz uplink and a compact PCIe module interface. The 4×4 MIMO arrangement can improve spatial reuse and support multiple concurrent links, while the module’s WiFi 7 features are relevant to modern factory, building, and warehouse networks. The verified 3.3V operating voltage and 8.5W maximum consumption require a regulated supply with transient margin and a thermal design appropriate for the enclosure. Linux or Android support is stated from mainline kernel version 5.4.213 upward, so embedded software integration should include device-tree, regulatory-domain, and driver validation before deployment.
おすすめ
Cybersecurity Appliance
A cybersecurity appliance can use ZK-WLE7000E5 when the product requires a high-throughput wireless inspection or backhaul link. The module’s 5GHz WiFi 7 operation and four spatial streams support demanding traffic inspection, secure access-point operation, or encrypted traffic transfer in suitable environments. Its 8.647Gbps maximum rate is a link capability rather than a guaranteed application throughput, so designers should test under realistic interference and encryption workloads. The four U.FL connectors allow antenna placement outside a metal enclosure, while miniPCIe and PCIe 3.0 simplify integration with embedded computing platforms. The verified data lists Windows as NA, making Linux-based implementation the more directly supported path.
おすすめ
Transportation Connectivity
ZK-WLE7000E5 can support transportation connectivity equipment requiring a 5GHz wireless link for onboard or infrastructure communications. The 4×4 MIMO configuration and up to 18dBm output per chain are useful when wider signal coverage is needed, although the final antenna and regulatory design must account for the vehicle or transportation environment. The module’s stated maximum consumption of 8.5W makes power and thermal planning important in compact equipment. Commercial and industrial radio options are identified in the source material, but the exact QCN6224, QCN6274, or QCN9274 configuration should be selected according to qualification, temperature, and regulatory requirements supplied by the manufacturer.
おすすめ
Enterprise Backhaul
ZK-WLE7000E5 is a candidate for enterprise backhaul equipment that must combine station connectivity with access-point service or bridging functions. The verified data indicates support for both access-point and station modes, allowing the module to participate in a product that connects two sites or provides a wireless backhaul path. The 4×4 MIMO arrangement and up to 8.647Gbps maximum data rate can help serve high-density client traffic, while OFDMA may improve efficiency when multiple downstream clients transmit concurrently. The host system must support miniPCIe and PCIe 3.0, and the product team should validate link aggregation, roaming, antenna placement, and environmental performance with the exact firmware and radio configuration ordered.
おすすめ
Small-Business Networking Appliance
ZK-WLE7000E5 can be used in a small-business router or wireless gateway where customers want higher 5GHz capacity and newer WiFi 7 features without designing a complete radio from discrete components. Its four U.FL antenna connectors permit external antenna placement, and its 4×4 MU-MIMO capability supports multi-client environments. The miniPCIe interface is convenient for embedded platforms, but the 3.3V supply and maximum 8.5W consumption should be treated as a complete power-budget requirement, including carrier-board losses and peak states. The supplied data does not include a verified retail price, stock level, or regulatory certification status, so commercial release requires supplier confirmation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ZK-WLE7000E5 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | WLE7000E5 | WLTE7000E5 | ZK-WLE7002E25 | ZK-WLE7002E26 | WLE7002E25 |
|---|---|---|---|---|---|---|
| Brand | Zukaka | Compex Systems | Compex Systems | Zukaka | Zukaka | Compex Systems |
| Package | miniPCIe | miniPCIe | miniPCIe | miniPCIe | miniPCIe | miniPCIe |
| Host Interface | miniPCIe with PCIe 3.0 | miniPCIe with PCIe 3.0 | miniPCIe with PCIe 3.0 | miniPCIe | miniPCIe | miniPCIe |
主な差別化要因
- Zukaka sourcing alternative to the Compex WLE7000E5 reference family （vs WLE7000E5)
- High-throughput 4-stream radio architecture （vs WLTE7000E5)
- External antenna flexibility through four U.FL connectors （vs WLE7002E25)
設計ノート
Design the 3.3V supply for the verified maximum power consumption of 8.5W, including startup transients, carrier-board conversion losses, and RF operating peaks. Provide local high-frequency decoupling at the module and follow the current manufacturer power-delivery layout. Estimated: at 3.3V and 8.5W, the module current is approximately 2.58A, so the supply path should be rated above that operating point. Confirm the final limit and transient requirements with the current manufacturer documentation.
Treat all four U.FL antenna paths as independent 5GHz RF routes. Keep antenna launch geometry, impedance-controlled traces, connector transitions, and antenna clearances consistent with the module reference design. Avoid long parallel runs and unnecessary stubs, and maintain antenna spacing sufficient to reduce mutual coupling and interference. RF certification, cable loss, connector loss, and enclosure materials can materially change effective coverage, so validate the complete assembly rather than only the bare module.
The verified maximum power consumption of 8.5W requires an enclosure and carrier-board thermal plan. Estimated: at 8.5W, heat must be removed continuously at the module and surrounding components; increasing copper area or using a controlled heat-spreading structure may be necessary in compact systems. Do not infer a safe ambient temperature or junction rating because those values are not supplied. Request the industrial-grade thermal and environmental specifications for the exact QCN6224, QCN6274, or QCN9274 configuration.
Do not assume that every WLE7000-family module is an unconditional substitute. Although the supplied cross-reference data describes pin-compatible alternatives, verify the miniPCIe connector signals, PCIe enumeration, host driver, firmware, antenna calibration, regulatory approval, temperature grade, and operating modes for the exact replacement. The verified source explicitly lists Bluetooth and Windows support as NA, so those functions must not be assumed when replacing a module in an existing product.
コンプライアンス情報
The supplied product pages do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. The module is not an automotive semiconductor qualification claim in the supplied data; confirm all regulatory and environmental compliance with the supplier.
