집적 회로

하위 카테고리

📁 ADC/DAC 2,700+ 제품 📁 증폭기 IC 1,100+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 480+ 제품 📁 Comparator ICs 0 제품 📁 DSP 1,000+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6,800+ 제품 📁 인터페이스 IC 2,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 360+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 19,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (35,000+)

PIC16LC924-04I/L - 8-Bit 4MHz CMOS MCU with LCD Driver | Microchip
PIC16LC924-04I/L

PIC16LC924-04I/L - 8-Bit 4MHz CMOS MCU with LCD Driver | Microchip

The Microchip Technology PIC16LC924-04I/L is an 8-bit RISC CMOS microcontroller with integrated LCD driver, 7KB (4K x 14) of one-time-programmable (OTP) EPROM program memory, and 176 bytes of SRAM, housed in a 68-pin PLCC (J-Lead) package. It executes 35 single-word instructions at 4 MHz with a 500 ns instruction cycle (except program branches which take two cycles), operating from a 2.0 V to 6.0 V supply that supports both 3.3 V and 5 V rails. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (ROM/RAM), and programmable I/O peripherals on one IC. The PIC16LC924 belongs to the Mid-Range PIC family, descended from the original PIC16C architecture, and is differentiated from generic 8-bit MCUs by its on-chip LCD driver - a feature that historically targeted low-power human-machine-interface products such as metering, thermostats, and portable instruments where displaying segmented alphanumeric data directly removed the need for an external display controller. Key features include 12 digital I/O ports, an integrated LCD driver with up to 32 segment outputs and 4 common planes (32x4 multiplexed), a 5-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, a USART/SCI serial port, and an industry-standard 8-bit Harvard RISC core. The 'LC' suffix denotes a low-power CMOS variant optimized for battery operation, and the 'I' temperature grade covers the industrial -40C to +85C range. Architecturally the part uses a 14-bit instruction word with separate program and data buses (Harvard), 8 general-purpose file registers, and a hardware multiply assist that supports a single-cycle 8x8 x 16 operation. The integrated LCD charge pump can be configured for static, 1/2, 1/3, or 1/4 duty cycle and supports Type A waveforms, allowing direct connection of typical TN glass without external bias generation. Typical applications include utility metering (electricity, gas, water), electronic thermometers, handheld measurement instruments, automotive dashboard clusters, white-goods control panels, and any portable product requiring a segmented glass display driven from a single low-voltage battery. The on-chip LCD controller typically eliminates the need for an external driver IC, reducing BOM cost and PCB area. When designing with this part, note that OTP memory is one-time programmable - code must be fully verified before production programming. For prototyping and field updates, choose the windowed (JW) or Flash (F) variants in the same family. The 68-PLCC footprint allows easy socketed programming and rework. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LC924-04I/PT - 8-Bit 4MHz LCD MCU 7KB OTP TQFP-64 | Microchip
PIC16LC924-04I/PT

PIC16LC924-04I/PT - 8-Bit 4MHz LCD MCU 7KB OTP TQFP-64 | Microchip

The Microchip Technology PIC16LC924-04I/PT is an 8-bit CMOS RISC microcontroller with integrated LCD driver, 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, 176 bytes of SRAM, and 52 digital I/O pins. Operating at a 4 MHz instruction rate, it ships in a 64-pin TQFP (10x10 mm) surface-mount package and supports the PIC mid-range 16C instruction set with only 35 single-word instructions. An 8-bit microcontroller (MCU) is a small, single-chip computer built around an 8-bit data path and a Harvard-style RISC core. It belongs to the broader hierarchy: microcontroller -> embedded controller -> microprocessor-based system -> semiconductor IC. Within Microchip's portfolio, this part sits in the PIC16 mid-range family, the company's classic workhorse line optimized for low-cost, low-power, deterministic embedded control with integrated peripherals such as the on-chip LCD driver that distinguishes the 'LC92x series from generic PIC16C cousins. Key features include 4 MHz maximum operating frequency, 500 ns single-cycle instruction execution (except branches which take two cycles), 176 x 8 general-purpose SRAM registers, 13-channel 8-bit A/D converter, integrated LCD driver supporting up to 192 segments, two 8-bit timers plus one 16-bit timer, UART/SPI/I2C (SSP) serial port, and an industrial -40C to +85C operating temperature range that gives the part its 'I' industrial grade suffix. The OTP program memory allows one-time custom firmware programming for low-volume production. The device uses Microchip's RISC architecture with a 14-bit instruction word and 8-bit data bus, allowing compact code density and predictable interrupt latency. Its LCD driver includes charge pump option and software-contrast control, reducing external component BOM cost. Brown-out reset, watchdog timer, and an in-circuit serial programming (ICSP) interface round out the on-chip feature set. Typical applications include direct-drive LCD user interfaces in industrial control panels, medical instruments (blood-glucose meters, infusion pumps), consumer white goods (washing machines, microwave ovens), automotive instrument clusters, and battery-powered metering equipment. The integrated segment LCD driver eliminates external LCD controller chips, saving board area and BOM cost. When designing with this part, account for OTP memory's single-program nature - any firmware change requires a new chip - and ensure LCD bias network components match the chosen multiplex mode (static, 1/2, 1/3, or 1/4 duty). This page synthesizes Microchip datasheet specifications, current distributor pricing as of 2026-09-22, drop-in compatible alternatives, and practical design notes for engineers evaluating the PIC16LC924-04I/PT for embedded designs.

견적 요청 문의하기
PIC16LC924T-04I/L - 8-Bit CMOS MCU with LCD Driver | Microchip
PIC16LC924T-04I/L

PIC16LC924T-04I/L - 8-Bit CMOS MCU with LCD Driver | Microchip

The Microchip Technology PIC16LC924T-04I/L is an 8-bit CMOS microcontroller with an integrated LCD driver, 7KB (4K x 14) of One-Time Programmable (OTP) program memory, and 176 bytes of RAM, operating from a 3.0V to 5.5V supply at up to 4MHz in a 68-pin PLCC (Plastic Leaded Chip Carrier) package with J-leads. An 8-bit microcontroller (MCU) is a programmable computing IC that executes code stored in on-chip non-volatile memory and interfaces to the outside world through digital and analog peripherals. The PIC16LC924 belongs to Microchip's PIC16 family of RISC (Reduced Instruction Set Computer) microcontrollers, which sit within the broader MCU category of embedded processors, and ultimately under the semiconductor device hierarchy. The 'LC' suffix designates a low-voltage CMOS process node optimized for power efficiency at extended supply ranges. The integrated LCD driver hardware makes this part a single-chip solution for human-machine interface applications, eliminating the need for an external display controller. Key features include 52 digital I/O pins arranged across multiple ports, an integrated LCD driver supporting up to 96 segments (configurable for static, 1/2, 1/3, and 1/4 multiplex modes), 4MHz maximum oscillator frequency, ADC, USART, and standard PIC16-family peripherals including timers and a watchdog timer. The OTP memory architecture suits volume production runs where firmware is finalized and code-change flexibility is no longer required. The RISC-based Harvard architecture separates program and data memory for simultaneous fetch and access, while the low-power CMOS process delivers extended battery life in portable products. The wide 3.0V-5.5V supply tolerance bridges legacy 5V designs and modern 3.3V systems, simplifying system-level power design. Typical applications include household appliances with LCD displays (microwave ovens, washing machines, thermostats), industrial control panels, instrumentation readouts, medical device displays, and consumer electronics requiring user input/output and a small character/segment LCD panel. A key design consideration is the OTP memory's one-time programmability: once programmed, the firmware cannot be altered, so production-grade firmware must be fully validated during prototyping using a windowed (UV-erasable) or flash-based sister part such as the PIC16F-series variant before committing to the PIC16LC924T-04I/L for production. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found aggregated in the manufacturer datasheet.

견적 요청 문의하기
PIC16LC925-I/L - 8-bit PIC MCU 7KB OTP LCD Driver | Microchip
PIC16LC925-I/L

PIC16LC925-I/L - 8-bit PIC MCU 7KB OTP LCD Driver | Microchip

The Microchip Technology PIC16LC925-I/L is an 8-bit CMOS microcontroller from the PIC16C family, featuring 7KB of OTP program memory (4K x 14), 176 bytes of RAM, and an integrated LCD driver, housed in a 68-pin PLCC (J-Lead) package measuring 24.23 x 24.23 mm. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral interfaces. The PIC16LC925 belongs to the mid-range PIC family built on a Harvard RISC architecture with separate program and data buses. PIC microcontrollers sit within the broader taxonomy of microcontrollers -> embedded microcontrollers -> CMOS microcontrollers -> 8-bit MCUs. The "LC" suffix designates a low-power CMOS variant optimized for battery-friendly operation, and this specific part integrates a segment LCD driver for direct glass connection. Key features include 52 digital I/O pins, a 20 MHz maximum clock speed, and an integrated LCD driver supporting up to 96 segments. The device operates from a 2.5V to 5.5V supply (typical 5V), includes three timers, a USART, and an analog comparator. Its instruction set is optimized for compact code density with 35 single-word instructions, most executing in a single instruction cycle. The PIC16LC925 uses a modified Harvard architecture with a 14-bit instruction word and separate 8-bit data path. The integrated LCD module features selectable bias and duty cycle configurations, charge pump option, and software-controlled contrast. In-system programming is supported via the ICSP interface, simplifying field updates. Typical applications include industrial control panels with LCD readouts, medical instrument displays, automotive dashboard sub-systems, instrumentation with character or graphic LCDs, point-of-sale terminals, and consumer appliances requiring a low-power MCU with display capability. When designing with this part, note that OTP memory cannot be reprogrammed in-circuit; ensure firmware is fully validated before blowing the OTP array. Use the ICSP header for prototype development and migrate to a Flash-based PIC16F equivalent for production flexibility. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LC925-I/PT - 8-Bit 20MHz 7KB OTP MCU with LCD | Microchip
PIC16LC925-I/PT

PIC16LC925-I/PT - 8-Bit 20MHz 7KB OTP MCU with LCD | Microchip

The Microchip Technology PIC16LC925-I/PT is an 8-bit RISC microcontroller with an integrated LCD driver, delivering 7KB (4K x 14) of One-Time-Programmable (OTP) program memory in a 64-pin TQFP (10x10 mm) package. The device runs at up to 20MHz and is targeted at low-power embedded applications that need a built-in LCD segment driver, 176 bytes of RAM, and 52 digital I/O pins in a single chip. An 8-bit microcontroller (MCU) is a programmable single-chip computer with an 8-bit data bus; it executes instructions fetched from on-chip non-volatile memory and operates peripherals such as timers, A/D converters, communication ports and (in the PIC16LC925 case) an LCD segment driver. The PIC16LC925 sits within the broader taxonomy of microcontroller -> embedded controller -> semiconductor -> integrated circuit, and is part of Microchip's PIC16C/LC family of CMOS OTP and ROM-based microcontrollers. Key features include a Harvard-architecture RISC CPU core with a reduced instruction set optimized for compiler efficiency, an integrated LCD driver capable of driving a multiplexed segment LCD, an on-chip 8-bit A/D converter, multiple timers, a USART/SCI port, and an I2C/SPI compatible master/slave serial port. The wide operating voltage range of 2.5V to 5.5V allows both 3.3V and 5V system designs. The PIC16LC925 is implemented in CMOS technology with low-power design techniques that yield low standby current. Compared with the EPROM-windowed PIC16C925, the LC (low-power CMOS) variant is optimized for portable and battery-backed products where quiescent current and OTP cost matter more than in-circuit reprogrammability. Typical applications include human-machine interface panels with segment LCDs, industrial control front-ends, instrument cluster displays, consumer appliances with built-in displays, and any embedded design that needs a single-chip combination of CPU plus LCD driver without an external display controller. When designing with this device, plan the I/O budget carefully: 52 I/O is generous but several pins are shared with the LCD segment outputs, the A/D inputs, and the external memory interface. Always check the pinout table in the datasheet before assigning signals, and ensure your OTP programming flow is locked in before the prototype build because the PIC16LC925 cannot be re-programmed in-circuit.

견적 요청 문의하기
PIC16LC925T-I/PT - 8-Bit OTP MCU 7KB LCD 64-TQFP | Microchip
PIC16LC925T-I/PT

PIC16LC925T-I/PT - 8-Bit OTP MCU 7KB LCD 64-TQFP | Microchip

The Microchip Technology PIC16LC925T-I/PT is an 8-bit CMOS microcontroller from the PIC16C family that operates at up to 20 MHz and integrates an on-chip LCD driver, making it a single-chip solution for low-power human-machine interface (HMI) designs. The device is housed in a 64-pin TQFP (10x10 mm) surface-mount package, carries 7 KB of OTP program memory organized as 4K x 14 words, provides 176 bytes of data RAM, and exposes 25 digital I/O lines together with a 5-channel 10-bit ADC. The 'LC' suffix indicates a wide-voltage 2.5 V to 5.5 V core, while the 'T' suffix denotes Tape & Reel packaging and 'I/PT' indicates the industrial (-40C to +85C) temperature range. What is a PIC16 microcontroller? PIC16 is Microchip's mid-range 8-bit RISC microcontroller architecture, sitting hierarchically between the baseline PIC10/PIC12 family and the high-performance PIC18 family. PIC16C parts use one-time programmable (OTP) EPROM program memory, which is optimized for cost-sensitive, high-volume production runs where the firmware is finalized before mask/OTP programming. The 'LC' low-voltage variant extends the operating range below 3 V and is differentiated from the standard 'C' and 'F' (Flash) variants in the same pinout. Key features include a Harvard architecture with separate 14-bit program and 8-bit data paths, a hardware LCD driver that supports up to 192 segments directly (no external driver required for typical alphanumeric LCDs), a 10-bit successive-approximation ADC with five input channels, and two 8-bit timer/counters plus one 16-bit timer/counter. The instruction cycle is four oscillator clocks, giving 200 ns per instruction at 20 MHz. Brown-out reset, watchdog timer, and in-circuit serial programming (ICSP) are integrated, reducing external component count. Typical applications include consumer appliances with LCD front panels (microwave ovens, washing machines, thermostats), industrial process controllers, instrumentation with integrated keypads and displays, medical monitors with small LCD readouts, and automotive dashboard sub-modules. The wide-voltage LC core is well-matched to battery-backed designs that must continue to operate while a primary supply is removed. When designing with this device, note that OTP memory is programmed once and cannot be field-updated; for serviceable products choose the pin-compatible PIC16F family Flash variant. Adequate decoupling on VDD/AVDD and a clean low-jitter clock source are required for ADC accuracy; in high-noise environments add a small RC filter to the analog reference pin.

견적 요청 문의하기
PIC16LC926-I/L - 8-bit MCU, 14KB OTP, 52 I/O, LCD Driver | Microchip
PIC16LC926-I/L

PIC16LC926-I/L - 8-bit MCU, 14KB OTP, 52 I/O, LCD Driver | Microchip

The Microchip Technology PIC16LC926-I/L is a low-power 8-bit CMOS microcontroller with an integrated LCD driver, 14KB of one-time-programmable (OTP) program memory, 336 bytes of RAM, and 52 digital I/O pins. The device is housed in a 68-pin PLCC (J-Lead) package measuring 24.23x24.23 mm and executes instructions in 200 ns at a 20 MHz clock. The 'LC' prefix indicates an extended voltage range of 2.1 V to 5.5 V optimized for battery-backed and portable designs. An on-chip LCD driver supports up to 192 segments, allowing direct multiplexed glass attachment without an external controller. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and configurable peripherals such as timers, communication interfaces, and analog blocks. The PIC16LC926 belongs to the PIC16 family of 8-bit RISC microcontrollers, which sit within the broader hierarchy of microcontrollers -> embedded controllers -> semiconductors -> integrated circuits. PIC MCUs use a Harvard architecture with a 14-bit instruction word and 35 single-word instructions, simplifying firmware development while keeping deterministic interrupt latency suitable for real-time control. Key differentiating features include the integrated LCD driver (up to 192 segments at 4 commons), five 8-bit bidirectional ports, two analog comparators, a 5-bit programmable prescaler shared with Timer0/Timer1, 14 interrupt sources, and a wide 2.1 V to 5.5 V operating range that enables single-cell Li-ion or two-AA battery operation. The 8-bit core plus 14 KB OTP make it well-suited to mid-volume applications where field programmability via ICSP is acceptable but mask-ROM NRE is not. Sleep current below 1 uA typical supports long standby times in metering and remote-sensor applications. Architecturally, the PIC16LC926 uses a 14-bit instruction word and an 8-bit data path; the OTP program memory is split into 8K x 14 words, allowing compact encoding of bit-manipulation and table-read operations. The LCD controller supports static, 1/2, 1/3, and 1/4 multiplex with software-selectable bias and frame frequency, reducing external BOM. Two analog comparators share reference levels with the on-chip LCD bias generator, allowing simple battery-monitor and signal-conditioning interfaces without external op-amps. Typical applications include metering and instrumentation (electricity/gas/water meters with LCD readout), consumer white goods with LCD user interfaces, medical devices requiring low standby current, industrial control panels, and remote sensor nodes with battery-powered displays. The combination of 52 I/O, 14 KB code space, integrated LCD, and 2.1 V minimum VDD addresses legacy designs where a single MCU must drive both logic and a segment display. When designing with this device, ensure the LCD bias and segment/commons pin assignments are planned before PCB layout because most pins have a fixed LCD mapping. Place a 0.1 uF decoupling capacitor within 5 mm of VDD/AVSS and route the oscillator traces short. The OTP memory cannot be erased; use the flash PIC16LF1902 family for development or in-circuit reprogrammability. This page synthesizes distributor pricing, drop-in PIC16LC926 alternatives, parametric differences across the PIC16C/LC/LF families, and practical design notes not collected in the manufacturer datasheet.

견적 요청 문의하기
PIC16LC926-I/PT - 8-bit 20MHz 14KB OTP MCU 64-TQFP | Microchip
PIC16LC926-I/PT

PIC16LC926-I/PT - 8-bit 20MHz 14KB OTP MCU 64-TQFP | Microchip

The Microchip Technology PIC16LC926-I/PT is a CMOS OTP-based 8-bit PIC16-family microcontroller that integrates an on-chip LCD driver, designed for low-power human-machine interface applications. It executes one instruction every 200 ns at 20 MHz and is offered in a 64-pin TQFP (PT, 10x10 mm) package with 14 KB (8K x 14) of program memory and 336 bytes of data RAM. The 'LC' variant operates from a 2.5V to 5.5V supply, and the 'I' suffix indicates an industrial -40C to +85C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), working RAM, and a rich set of peripheral interfaces. Within the broader taxonomy, PIC16C/LC926 sits in the 8-bit MCU tier -> RISC microcontroller -> embedded controller -> semiconductor IC. The on-chip LCD driver is what differentiates this family from generic PIC16C devices, allowing direct segment driving of up to a 4x32 or 8x28 LCD glass without an external charge-pump or segment driver. Key features include 52 digital I/O lines, an integrated LCD driver supporting multiplexed displays, 8-bit A/D converter inputs (per family datasheet), 14 KB OTP program memory, 336 bytes of RAM, and three timer/counter modules (Timer0, Timer1, Timer2). The device also offers a synchronous serial port (SSP) for SPI/I2C, a USART, a watchdog timer with its own on-chip RC oscillator, and in-circuit serial programming (ICSP) for field firmware updates via two pins. Architecturally, the PIC16LC926 uses the enhanced PIC16C core with a 14-bit instruction word and Harvard bus structure (separate program and data paths), which is why the OTP is sized 8K x 14. The 'LC' CMOS process yields low power consumption (typical < 2 mA at 5V/20MHz, < 20 uA in sleep) compared with the older 'C' EPROM versions, while preserving instruction-set compatibility with PIC16C926 for code reuse. Typical applications include industrial control panels with LCD readouts, metering (electricity/gas/water), consumer appliances with segment displays, medical devices (blood-pressure monitors, glucometers), automotive dashboard clusters (auxiliary, non-safety), and point-of-sale terminals. The integrated LCD driver eliminates the need for an external HT1621 or similar segment-driver chip, reducing BOM cost and PCB area. When designing with the PIC16LC926-I/PT, note that OTP memory is one-time programmable and cannot be erased; prototypes should use the windowed CERDIP PIC16C926 or the Flash-based PIC16F946 for development. Use the on-chip ICD pins (RB6/RB7) for in-circuit debugging, and place 100 nF decoupling on every VDD/VSS pair close to the package.

견적 요청 문의하기
PIC16LC926T-I/L - 8-Bit 20MHz 14KB OTP LCD MCU | Microchip
PIC16LC926T-I/L

PIC16LC926T-I/L - 8-Bit 20MHz 14KB OTP LCD MCU | Microchip

The Microchip Technology PIC16LC926T-I/L is an 8-bit CMOS PIC16C-family microcontroller with integrated LCD driver, delivering up to 20 MHz operation, 14 KB of one-time-programmable (OTP) program memory (8K x 14 words), and 336 bytes of general-purpose RAM, housed in a 68-pin PLCC (24.23 x 24.23 mm) package. The "LC" voltage-class designation supports low-voltage operation from approximately 2.5 V to 6.0 V, while the "T" suffix indicates tape-and-reel packaging and "I/L" denotes the industrial temperature range (-40 C to +85 C) on the PLCC surface-mount lead form. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O into one device. The PIC16LC926 belongs to the mid-range PIC family, sitting in the 8-bit MCU segment of the broader embedded semiconductor hierarchy: microcontroller -> embedded processor -> semiconductor device. Within Microchip's portfolio it is part of the LCD-driver equipped PIC16LC9xx line designed for human-machine interface (HMI) applications such as metering, instrumentation, white goods, and consumer appliances. Key features include an on-chip LCD driver with up to 192 segment support, a 10-bit successive-approximation Analog-to-Digital Converter (ADC), a USART for asynchronous serial communication, two 8-bit timers and one 16-bit timer, an SSP module for SPI and I2C, and a brown-out detect / power-on reset block. The device uses a 14-bit instruction word and a Harvard architecture with separate program and data buses, allowing single-cycle instruction execution except for program branches. Typical applications include electronic utility meters with multi-digit LCD readouts, medical devices such as blood-pressure monitors and glucose meters, point-of-sale terminals, white-goods control panels, industrial process displays, and any battery- or line-powered HMI requiring integrated segment-LCD driving without an external driver IC. When designing with this part, allocate the PLCC land pattern (JEDEC MO-047) carefully because the through-hole PLCC socket allows easy prototyping but requires a different footprint than the TQFP variant. Plan I/O pin assignments early, since the LCD segment pins are multiplexed with digital I/O and cannot be reassigned arbitrarily. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC16LC926T-I/PT - 8-bit LCD MCU 14KB OTP 20MHz TQFP-64 | Microchip
PIC16LC926T-I/PT

PIC16LC926T-I/PT - 8-bit LCD MCU 14KB OTP 20MHz TQFP-64 | Microchip

The Microchip Technology PIC16LC926T-I/PT is an 8-bit CMOS microcontroller based on the PIC16C core with an integrated LCD driver, 14KB (8K x 14) of One-Time-Programmable (OTP) program memory, 336 bytes of RAM, and a 20MHz maximum operating frequency, supplied in a 64-pin TQFP package on tape-and-reel. The 'LC' suffix indicates the 2.5V to 5.5V low-voltage operating range, while the 'I' suffix denotes the industrial -40C to +85C temperature range, and the 'PT' package code marks the plastic TQFP-64 footprint (10mm x 10mm body). An 8-bit PIC microcontroller (often called MCU or microcontroller unit) is a single-chip computer integrating a CPU core, program memory, RAM, peripheral set, and I/O on one die; it sits inside the broader taxonomy of embedded microcontrollers -> microprocessors -> semiconductors, and is the canonical choice for low-power, deterministic control tasks where a Cortex-M or DSP would be over-specified. Key features include 25 digital I/O lines, an integrated LCD driver capable of up to 4 common x 32 segment duty-multiplexed panel control, a 10-bit 5-channel analog-to-digital converter, two 8-bit timers plus one 16-bit timer, a watchdog timer (WDT), brown-out reset (BOR), power-on reset (POR), I2C and SPI synchronous serial ports, and PWM with capture/compare capability. The device is fabricated on Microchip's mature OTP CMOS process and uses an external oscillator reference for system clocking. The architecture pairs a 14-bit wide instruction word with a Harvard bus layout, allowing most instructions to execute in one instruction cycle and yielding strong deterministic interrupt response - a property valued in appliance, metering, and instrumentation firmware. Five channels of 10-bit ADC suit sensor front-ends for temperature, voltage, and current monitoring, while the LCD driver eliminates the need for an external charge-pump or segment-driver ASIC. Typical applications include white-good and appliance user-interface panels, electronic utility meters, portable medical instruments with segment LCDs, automotive dashboard sub-displays (non-safety), and industrial HMI controllers. The combination of LCD driver, ADC, and moderate I/O count on one die makes it attractive for cost-sensitive human-machine-interface nodes. When designing in this MCU, confirm oscillator selection matches the application: a 20MHz crystal is required for full-speed operation and the PLL is not used. Reserve one I/O line for the MCLR reset function and ensure the BOR level is configured for the actual supply rail. Program OTP devices in volume using a gang programmer, since OTP cannot be erased in-circuit. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement and embedded engineers a faster path to selection and qualification.

견적 요청 문의하기
PIC16LCE623-04/P - 8-bit MCU, 896B OTP, 4MHz, 18-DIP | Microchip
PIC16LCE623-04/P

PIC16LCE623-04/P - 8-bit MCU, 896B OTP, 4MHz, 18-DIP | Microchip

The Microchip Technology PIC16LCE623-04/P is an 8-bit CMOS microcontroller based on the PIC16C family core, offering 896 bytes of One-Time-Programmable (OTP) program memory in an 18-pin PDIP through-hole package. It operates at a maximum clock speed of 4 MHz from a 2.5 V to 5.5 V supply and integrates 96 bytes of SRAM data memory with 13 general-purpose digital I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral I/O into one package. Within the broader product hierarchy, the PIC16LCE623 belongs to the 8-bit microcontroller category, which itself sits under the microcontrollers segment of integrated circuits (ICs). The PIC16C/PIC16LC architecture uses a RISC-style instruction set with only 35 single-word instructions and an 8-level hardware stack, enabling deterministic real-time control in cost-sensitive embedded designs. Key features include the PIC16 mid-range 14-bit instruction word, 200 ns instruction cycle time at 4 MHz, an external oscillator interface, an integrated 8-bit timer/counter with optional prescaler, and a programmable watchdog timer. The "LCE" family designation indicates the low-power, OTP-programmable, extended-temperature variant, optimized for battery-powered and industrial environments where field-programmability and low quiescent current are valuable. The PIC16LCE623-04/P uses the Enhanced Mid-Range Harvard architecture with separate program and data buses, allowing instruction fetch and operand access in a single cycle. The 4 MHz maximum clock and 13 I/O make it a fit for simple sensing, control, and user-interface tasks. Designers should note that OTP parts are one-time programmable only and cannot be re-programmed in-circuit, which is a deliberate trade-off for low unit cost. Typical applications include appliance control, sensor signal conditioning, low-speed serial communication bridges, and battery-powered instruments. The wide 2.5 V to 5.5 V operating range allows direct connection to single-cell Li-ion or two-AA battery stacks, eliminating boost converters in simple nodes. When designing with this device, route the MCLR/VPP reset line and the two-decimal decouple VDD/VSS pair as close to the package pins as possible. Verify that any OTP programmer you select supports the PIC16LC6xx device ID 0x1060 before laying out the prototype. This page synthesizes distributor pricing, pin-compatible alternatives from Microchip's PIC16LC family, and practical design notes not collected in any single manufacturer datasheet or distributor listing.

견적 요청 문의하기
PIC16LCE623-04/SO - 8-bit OTP MCU, 4MHz, 13 I/O | Microchip
PIC16LCE623-04/SO

PIC16LCE623-04/SO - 8-bit OTP MCU, 4MHz, 13 I/O | Microchip

The Microchip Technology PIC16LCE623-04/SO is an 8-bit CMOS OTP (One-Time Programmable) microcontroller built on Microchip's mid-range PIC16 architecture with 13 I/O lines and a maximum clock frequency of 4 MHz, housed in an 18-pin SOIC-300 package. The device integrates 875 bytes (896 bytes per Microchip literature) of program memory, 96 bytes of data RAM, and 128 bytes of data EEPROM, providing a compact footprint for cost-sensitive embedded designs. What is a PIC16 microcontroller? The PIC16 family is Microchip's mid-range 8-bit RISC microcontroller family, sitting between the baseline PIC10/PIC12 series and the high-performance PIC18 series. PIC16C parts ship with mask-ROM or OTP program memory, while PIC16F parts use Flash for reprogrammability. PIC16LC variants (the 'L' suffix) operate at a lower 2.5 V minimum supply voltage compared to standard PIC16C parts, enabling battery-powered and energy-conscious designs. The 'CE' prefix indicates a comparator-equipped variant (two on-chip comparators), and 'E' suffix marks the enhanced 14-bit instruction word core. Key features include a 4 MHz maximum operating frequency, a wide 2.5 V to 5.5 V supply range, two on-chip analog comparators, a watchdog timer, power-on reset, and an 8-bit timer/counter with capture/compare/PWM capability. The 13 I/O pins support digital I/O with programmable weak pull-ups and interrupt-on-change wake-up. The device targets 35 instructions at 200 ns per instruction cycle at 20 MHz (proportionally longer at 4 MHz), enabling predictable real-time control. The PIC16LCE623 employs a RISC Harvard architecture with separate program and data buses, a 14-bit instruction word, and 8-bit data path. Its CMOS design delivers low power consumption with brown-out reset (BOR) support. Program memory is OTP (one-time programmable), which is fixed at production and cannot be erased, making it best suited for mature production designs where code is final and high reliability is required. Typical applications include low-cost consumer appliances, battery-powered sensor nodes, simple motor control, white goods control boards, and industrial timer/sequencer modules. Its 4 MHz clock, 13 I/O lines, and 2.5 V minimum supply make it ideal for portable or energy-harvesting systems requiring extended battery life and small footprint. When designing with PIC16LCE623-04/SO, ensure your firmware is fully validated before programming since OTP cannot be re-flashed. Use Microchip's MPLAB X IDE and PICkit programmer support during development; consider migrating to a PIC16F flash equivalent for prototyping flexibility. Decoupling capacitors of 0.1 µF near VDD and a 10 µF bulk cap near the supply pins are recommended. This page synthesizes current distributor pricing, drop-in compatible PIC16 family alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers source, evaluate, and substitute this part.

견적 요청 문의하기
PIC16LCE623-04E/P - 8-Bit 4MHz OTP MCU 896B | Microchip
PIC16LCE623-04E/P

PIC16LCE623-04E/P - 8-Bit 4MHz OTP MCU 896B | Microchip

The Microchip Technology PIC16LCE623-04E/P is an 8-bit PIC16C-series microcontroller featuring 896 bytes (512 x 14) of One-Time Programmable (OTP) program memory, 96 bytes of RAM, and 13 I/O pins, housed in a through-hole 18-PDIP package (0.300 inch / 7.62 mm). It operates at up to 4 MHz with an external oscillator across a 2.5 V to 5.5 V supply range. An 8-bit microcontroller (MCU) is a small computer-on-a-chip containing a CPU, program memory, RAM, and peripherals designed for embedded control tasks. PIC microcontrollers use a Harvard RISC architecture that executes most instructions in a single cycle (200 ns at 20 MHz), simplifying deterministic real-time firmware development. The PIC16C family sits within Microchip's hierarchy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor, and the PIC16CE623 specifically targets low-voltage (LC suffix) applications requiring EPROM-style OTP programming at reduced cost. Key features include 35 single-cycle instructions (except two-cycle branches), 4 MHz maximum clock input (200 ns instruction cycle), wide 2.5 V to 5.5 V supply range for battery-friendly operation, and 13 digital I/O pins. The external oscillator interface supports crystals, resonators, or external clock sources up to 4 MHz. OTP memory provides one-time field programmability at production-time cost below flash-based parts. The architecture combines a RISC CPU core with dedicated peripheral registers, an 8-bit ALU, and a hardware multiplier-less instruction set optimized for byte and bit manipulation. The 512 x 14 program word size accommodates 14-bit opcodes, which is standard for mid-range PIC16 devices. Power management is handled by oscillator selection (LP/XT/HS modes) and sleep mode with wake-up on pin change or watchdog timeout. Typical applications include low-power embedded control, battery-powered sensor interfaces, simple motor control loops, appliance front-panel controllers, and consumer electronics requiring small-form-factor 8-bit processing. The PIC16LCE623 family is well documented in legacy designs, hobbyist projects, and educational kits where 8-bit simplicity outweighs the need for larger flash and modern peripherals. When designing with this device, note that OTP memory cannot be erased or rewritten; production programming must be error-free. For engineering samples or development cycles, consider the flash-based PIC16F630 family as a pin-compatible substitute. Industrial temperature grade (E suffix) supports -40C to +125C operation. This page synthesizes distributor pricing, parametric comparisons, drop-in alternatives, and practical design guidance not consolidated on a single manufacturer datasheet page, supporting faster procurement and design-in decisions.

견적 요청 문의하기
PIC16LCE623-04E/SO - 4MHz 8-bit OTP MCU 896B | Microchip
PIC16LCE623-04E/SO

PIC16LCE623-04E/SO - 4MHz 8-bit OTP MCU 896B | Microchip

The Microchip Technology PIC16LCE623-04E/SO is an 8-bit CMOS OTP (One-Time Programmable) microcontroller from the PIC16C family, delivering 4 MIPS performance at a 4 MHz external clock and housed in an 18-pin SOIC wide-body surface-mount package. It integrates 896 bytes of program memory (512 x 14 words), 96 bytes of data RAM, and 13 digital I/O pins, along with an 8-bit timer/counter and on-chip analog comparator. The 'LC' suffix designates the 3.0V-3.6V low-voltage variant, and the 'E' suffix indicates the extended operating temperature grade (-40C to +125C). An 8-bit OTP microcontroller is a single-chip computer built around a Harvard-architecture CPU with non-volatile one-time-programmable program memory, distinct from flash-based MCUs that allow multiple erase/write cycles. OTP parts ship blank and are programmed once by the user, which reduces unit cost versus flash parts and makes them suited to mature production runs where firmware is finalized and code protection is enforced by the inability to read back the program. In the broader taxonomy, this device belongs to microcontrollers -> embedded controllers -> ICs, and within the PIC16 family it represents an early-generation low-cost general-purpose MCU optimized for simple control loops, user-interface scanning, and appliance logic. Key features include a 4 MHz maximum clock, 200 ns single-cycle instruction execution (except 2-cycle branches), 35 single-word RISC-style instructions, an analog comparator module, a watchdog timer with on-chip RC oscillator, in-circuit serial programming (ICSP) via two pins, and power-saving SLEEP mode with wake-up on pin change. The PIC16LCE623-04E/SO also supports power-on reset, brown-out reset, and code-protection fuses. The architecture uses a 14-bit instruction word with separate program and data buses (Harvard), enabling simultaneous instruction fetch and operand access. The internal oscillator reference for the watchdog is RC-based and independent of the system clock, which simplifies BOM by removing an external watchdog resistor. Typical applications include white-goods and appliance control panels, remote-keyless-entry keyfobs, simple sensor interfaces, low-power battery indicator circuits, and replacement of discrete logic in cost-sensitive industrial equipment. When designing with this device, ensure the VDD supply is decoupled with 100 nF ceramic close to the pin pair, route the ICSP clock/data lines to a 5-pin header for in-system programming, and reserve the MCLR pin configuration carefully because enabling internal weak pull-up eliminates the need for an external reset RC network. This page synthesizes distributor stock, parametric depth, and drop-in alternatives beyond what is shown in the manufacturer datasheet, helping procurement and design engineers validate a replacement or finalize a long-life BOM.

견적 요청 문의하기
PIC16LCE623-04E/SS - 8-bit OTP MCU, 4MHz, 20-SSOP | Microchip
PIC16LCE623-04E/SS

PIC16LCE623-04E/SS - 8-bit OTP MCU, 4MHz, 20-SSOP | Microchip

The Microchip Technology PIC16LCE623-04E/SS is an 8-bit PIC microcontroller from the PIC16LC6xx family, delivering up to 4 MHz CPU performance in a 20-pin SSOP package. The device integrates 896 bytes of One-Time Programmable (OTP) program memory, organized as 512 x 14 words, alongside 96 bytes of data RAM and 128 bytes of EEPROM for non-volatile parameter storage. With 13 digital I/O pins and an external oscillator interface, the part targets cost-sensitive embedded control designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripheral interfaces onto one IC. PIC microcontrollers use a RISC-based Harvard architecture where the program bus and data bus are separated, allowing instruction fetch and operand read to occur in the same cycle. The PIC16LC family is the low-power (LC) variant, typically supporting operation from 2.5V to 5.5V with sleep currents in the microamp range. Within Microchip's portfolio, the LC line sits beneath the F (Flash) line and is generally aimed at high-volume OTP-based designs rather than field-reprogrammable products. MCUs occupy the broader category of embedded processors, distinct from microprocessors by integrating memory and peripherals on-chip. Key features include a 4 MHz maximum clock frequency, 200 ns single-cycle instruction execution (with two cycles for program branches), a 35-instruction instruction set, 8-bit timer/counter, capture/compare/PWM (CCP) module, and an analog comparator. Brown-out reset (BOR) and power-on reset (POR) are integrated, alongside a watchdog timer (WDT) for reliable operation in electrically noisy environments. The SSOP-20 footprint is compatible with the standard 0.300-inch 18-pin DIP outline when PCB layout permits. Architecturally, the PIC16LC6xx core uses a 14-bit instruction word and an 8-bit data path, with dedicated peripheral registers mapped into the data memory space. The OTP program memory is programmed once and cannot be erased, making the part ideal for mature, stable production designs rather than iterative prototyping. The external oscillator option supports crystal, resonator, or external clock operation up to 20 MHz, with internal divide-by-N for CPU clock generation. Typical applications include appliance control, sensor signal conditioning, low-power remote controls, LED lighting controllers, and small-form-factor industrial interfaces. The device's combination of EEPROM, timers, and comparators makes it well-suited for closed-loop control of fans, pumps, and motor drivers, as well as for replacement of discrete logic in compact embedded boards. When designing with this part, note that OTP memory cannot be reprogrammed; therefore the production firmware must be fully validated before programming. Ensure the supply voltage stays within the LC variant's 2.5V-5.5V range; using the standard PIC16F equivalent may be preferable for in-circuit reprogrammability. Consider the PIC16LCE623-04/P variant only when a DIP package is needed for through-hole designs. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16LC6xx family, and practical design notes not consolidated on the manufacturer datasheet.

견적 요청 문의하기
PIC16LCE623-04I/P - 4MHz 8-bit OTP MCU 896B | Microchip DIP-18
PIC16LCE623-04I/P

PIC16LCE623-04I/P - 4MHz 8-bit OTP MCU 896B | Microchip DIP-18

The Microchip Technology PIC16LCE623-04I/P is an 8-bit RISC CMOS microcontroller from the PIC® 16C family, housed in an 18-pin DIP (0.300 inch, 7.62 mm) through-hole package. It integrates 896 bytes of One-Time Programmable (OTP) program memory, 96 bytes of SRAM data memory, and 13 bidirectional I/O pins, and operates at up to 4 MHz system clock from a 2.5 V to 5.5 V supply. The industrial temperature grade (-40C to +85C) suffix "I" and through-hole "P" package suffix make this part suitable for legacy, hand-soldered, and prototype-friendly designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripheral I/O on one die. PIC microcontrollers use a Harvard RISC architecture with a 14-bit instruction word, which keeps instruction fetch and data access on separate buses for deterministic timing. In the broader taxonomy, this places the PIC16LCE623 in the 8-bit MCU class within the microcontroller family, sitting under embedded computing and above discrete logic. The "LC" low-voltage CMOS prefix extends the original PIC16C die to sub-3V operation, while the "E" denotes an enhanced mid-range core. Key features include a 4 MHz maximum oscillator frequency, an 8-bit ADC (depending on the specific die variant), internal and external interrupt sources, a watchdog timer with dedicated on-chip RC oscillator, power-saving Sleep mode, and in-circuit serial programming (ICSP). The 14-bit instruction set delivers roughly 200 ns per instruction at 20 MHz (proportionally longer at 4 MHz), giving deterministic interrupt latency that is critical for real-time control loops. The through-hole DIP-18 footprint simplifies breadboarding and field repair, and the industrial temperature range allows deployment in uncontrolled enclosures. Typical uses include appliance control, low-end sensor interfaces, replacement of discrete logic in glue applications, battery-powered instruments taking advantage of the low-voltage core, and educational or hobbyist projects where OTP and through-hole packaging are advantages. The 4 MHz ceiling indicates the "-04" speed grade; higher "-20" grades exist for the same die. When designing with this part, ensure Vdd decoupling with at least 100 nF plus bulk capacitance, leave the MCLR pin pulled high through 10 kohm for normal operation, and respect the OTP programming window (one-time programmable - cannot be re-flashed after the programming window is closed). The DIP-18 footprint supports both socketed and soldered installations, easing real prototyping.

견적 요청 문의하기
PIC16LCE623-04I/SS - 8-Bit 4MHz OTP MCU 20-SSOP | Microchip
PIC16LCE623-04I/SS

PIC16LCE623-04I/SS - 8-Bit 4MHz OTP MCU 20-SSOP | Microchip

The Microchip Technology PIC16LCE623-04I/SS is an 8-bit CMOS microcontroller from the PIC16C family, delivering 4 MHz CPU performance with 896 bytes (512 x 14) of One-Time-Programmable (OTP) program memory in a 20-pin SSOP package. It integrates 128 bytes of EEPROM data memory and 96 bytes of RAM, providing a compact footprint for embedded control applications. Key features include 13 general-purpose I/O pins, a 2.5 V to 5.5 V wide operating voltage range, and an industrial temperature grade of -40 °C to +85 °C. The "LCE" suffix denotes the low-power CMOS core variant designed for battery-friendly operation, while the "04" speed grade specifies 4 MHz maximum oscillator frequency and the "I" suffix indicates the industrial temperature range. The PIC16LCE623-04I/SS uses Microchip's well-established mid-range 8-bit RISC architecture with 35 single-cycle instructions. The architecture provides deterministic timing suitable for real-time control, while the 14-bit instruction word supports direct bit manipulation, hardware register access, and interrupt-driven peripherals. Internal peripherals typically include timers, a watchdog timer, and analog comparators depending on die variant. Typical applications span low-power consumer products, white goods and appliance controls, simple sensor interfaces, and industrial monitoring nodes. The 20-SSOP package is footprint-compatible with many PIC16Cxxx siblings, which simplifies board respins when migrating to alternate OTP or windowed variants during prototyping. When designing with this device, ensure the oscillator configuration matches the application's EMI and power budget, and budget for OTP programming during production flow. The 20-SSOP exposed-pad variant is not used here; standard SSOP land pattern applies. This page synthesizes distributor pricing, cross-reference search results, and engineering selection guidance not aggregated in a single datasheet, helping engineers decide whether the PIC16LCE623-04I/SS fits their BOM or whether a Flash-based PIC16F sibling is a better long-term choice.

견적 요청 문의하기
PIC16LCE623T-04/SO - 8-Bit 4MHz OTP MCU 896B | Microchip
PIC16LCE623T-04/SO

PIC16LCE623T-04/SO - 8-Bit 4MHz OTP MCU 896B | Microchip

The Microchip Technology PIC16LCE623T-04/SO is an 8-bit RISC microcontroller from the PIC16C family featuring 896 bytes (512 x 14) of One-Time-Programmable (OTP) program memory, 96 bytes of data RAM, and 128 bytes of EEPROM data memory. It executes instructions at a 4 MHz clock rate from a 5V supply and is housed in an 18-pin SOIC (0.295 inch / 7.50 mm width) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripheral blocks into one package, designed to execute embedded control firmware in real time. Within the broader taxonomy, an 8-bit MCU such as the PIC16LCE623T-04/SO sits beneath the categories of embedded processor, microcontroller, PIC16 family, and finally the PIC16C sub-family using an OTP-programmed Harvard architecture. Its position in the system hierarchy is at the lowest computational tier, typically embedded inside consumer appliances, automotive subsystems, and industrial control loops where deterministic, low-cost, low-power control is required. Key differentiating features of this part include the OTP program memory that allows one-time field programming via Microchip development tools, an internal EEPROM block that retains user data without external storage, and a 4 MHz oscillator that supports both internal and external clocking. The 18-SOIC package simplifies hand-soldering and inspection during prototyping while remaining compatible with standard SMT assembly lines. The device also integrates core PIC peripherals - timers, interrupts, and digital I/O - sufficient for closed-loop control, sensor reading, and simple user-interface driving without external glue logic. At the architectural level, the PIC16LCE623 uses a Harvard architecture with separate program and data buses, a 14-bit instruction word, and a RISC instruction set designed for deterministic single-cycle execution. The CMOS process enables the "LC" low-power operating mode and the "E" extended-temperature grade, while the OTP array replaces flash to lower per-unit cost for high-volume, code-frozen production runs. Typical applications include consumer white-goods control boards, automotive body-electronics modules, low-cost sensor interfaces, LED lighting controllers, and battery-powered appliances where the OTP memory locks firmware at production and the on-chip EEPROM stores calibration or user settings. The wide operating voltage range and small SOIC footprint also make it suitable for space-constrained designs. When designing with the PIC16LCE623T-04/SO, note that OTP memory cannot be reprogrammed, so firmware must be fully validated before the device is programmed on the production line. The EEPROM write endurance (typically 1M cycles per the PIC16C EEPROM architecture) and brown-out reset configuration must be respected to ensure reliable field operation. This page synthesizes distributor stock and pricing data, drop-in compatible same-package alternatives, and practical design considerations not consolidated on the manufacturer datasheet, providing a single reference for engineers evaluating the PIC16LCE623T-04/SO.

견적 요청 문의하기
PIC16LCE623T-04I/SS - 8-Bit 4MHz MCU, 896B OTP, SSOP-20 | Microchip
PIC16LCE623T-04I/SS

PIC16LCE623T-04I/SS - 8-Bit 4MHz MCU, 896B OTP, SSOP-20 | Microchip

The Microchip PIC16LCE623T-04I/SS is an 8-bit RISC CMOS microcontroller from the PIC16 family, delivering 4 MHz CPU performance with 896 bytes of OTP program memory (512 x 14 words) in a 20-pin SSOP package, tape-and-reel packaged. The device operates from a 2.0 V to 6.0 V supply and integrates 96 bytes of SRAM and 128 bytes of EEPROM data memory. It exposes 13 digital I/O pins and is qualified for the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable peripherals. The PIC16C/PIC16LC sub-family is one of Microchip's classic mid-range architectures, pairing a 14-bit instruction word with a Harvard bus and a RISC-style instruction set for deterministic, byte-efficient embedded code. The 'LC' suffix denotes the low-voltage CMOS variant, allowing operation down to 2.0 V for battery-powered designs. Within the broader taxonomy, PIC16LCE623 sits as: microcontroller -> embedded MCU -> 8-bit MCU -> PIC mid-range MCU -> CMOS semiconductor IC. Key features include an internal 4 MHz oscillator, 8-bit data path, 14-bit instruction word, hardware multiplier (by subtraction), 8-level hardware stack, two 8-bit timers (Timer0, Timer2) plus one 16-bit timer (Timer1), a Capture/Compare/PWM (CCP) module, an analog comparator with selectable reference, 5-channel 8-bit ADC, and an internal watchdog timer with on-chip RC oscillator. Brown-out reset and power-on reset are circuit-stable. The PIC16LC core supports in-circuit serial programming (ICSP) via RB6/RB7, eliminating the need for an external programmer socket. The PIC16LCE623T-04I/SS uses Microchip's nanoWatt technology extensions, providing low-power sleep modes and a programmable weak pull-up on PORTB. The CMOS process yields typical active current of less than 2 mA at 4 MHz / 5 V, and sleep currents in the microampere range. The 20-pin SSOP (5.30 mm body width, 0.65 mm pitch) supports surface-mount assembly in space-constrained boards where through-hole PDIP is impractical. Typical applications include low-cost consumer white goods, battery chargers, sensor signal conditioning, LED driving controllers, small appliance control, and industrial sensor interfaces. The wide 2.0-6.0 V operating range makes it directly suitable for both 3.3 V and 5 V rails. The 128-byte EEPROM supports user-configurable parameter storage without external serial EEPROM chips. Designers select this MCU for applications where deterministic 8-bit processing, low power, and 20-pin SSOP integration outweigh the need for larger flash memory or peripherals. When designing with this part, note that 'T' suffix denotes tape-and-reel, 'I' denotes industrial temperature grade (-40C to +85C), and '04' marks the 4 MHz maximum clock. The 'SS' package suffix identifies SSOP-20. Reserve the RB6/RB7 pins for ICSP if in-system programming is required. This page synthesizes distributor pricing, drop-in alternatives drawn from the same Microchip PIC16 family, and practical design notes not found in the bare manufacturer datasheet.

견적 요청 문의하기
PIC16LCE624-04/P - 8-bit PIC MCU 1.75KB OTP 4MHz 18-PDIP | Microchip
PIC16LCE624-04/P

PIC16LCE624-04/P - 8-bit PIC MCU 1.75KB OTP 4MHz 18-PDIP | Microchip

The Microchip Technology PIC16LCE624-04/P is an 8-bit RISC microcontroller from the PIC16C family, featuring 1.75KB (1K x 14) of One-Time Programmable (OTP) program memory, 96 bytes of RAM, and 13 digital I/O pins, housed in an 18-pin PDIP (0.300 inch, 7.62mm) through-hole package. It operates from a 2.0V to 6.0V supply and runs at a maximum clock speed of 4 MHz, with the 'LCE' suffix denoting the low-voltage / extended commercial temperature variant of the PIC16CE624 family. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripheral interfaces onto one die. The PIC16C/E family sits in the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC, using a RISC Harvard-architecture core that executes one instruction per clock cycle (except branches). OTP program memory means each device can be programmed once by the user but cannot be erased, making this part well-suited to cost-sensitive volume production of fixed-function appliances. Key features include 13 bidirectional digital I/O pins, an integrated analog comparator, a Capture/Compare/PWM (CCP) module, a 5-channel 8-bit ADC, and an internal EEPROM data memory block. The wide 2.0V to 6.0V supply range supports both 3.3V and 5V designs, and the commercial temperature grade (0C to +70C) covers most indoor and office equipment environments. The PIC16LCE624-04/P is built around Microchip's 14-bit instruction word PIC16 architecture with separate program and data buses, allowing simultaneous instruction fetch and operand access. The 4 MHz oscillator input combined with a 4:1 internal divider yields a 1 MHz instruction cycle rate, providing predictable deterministic timing ideal for interrupt-driven control loops. Typical applications include white goods and appliance controls, simple sensor interfaces, low-cost motor control drivers, LED lighting controllers, and battery-powered consumer products. The 18-pin PDIP footprint is also popular in educational and hobbyist prototyping on breadboards and through-hole PCBs. When designing with this part, verify that your code is fully validated before programming because OTP cannot be reprogrammed; consider PIC16F-series flash equivalents for development and small-volume runs. This page synthesizes distributor pricing, drop-in PIC16 alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LCE624-04/SS - 8-bit PIC MCU 1.75KB OTP 4MHz SSOP-20
PIC16LCE624-04/SS

PIC16LCE624-04/SS - 8-bit PIC MCU 1.75KB OTP 4MHz SSOP-20

The Microchip Technology PIC16LCE624-04/SS is an 8-bit PIC microcontroller from the PIC16C family, featuring 1.75 KB (1K x 14) of One-Time Programmable (OTP) program memory, 96 bytes of RAM, and 13 general-purpose I/O pins, all packaged in a 20-pin SSOP (Shrink Small Outline Package). The device operates from a 2.5V to 5.5V supply and supports a maximum clock speed of 4 MHz (the "/04" speed grade), targeting low-power and cost-sensitive embedded designs. An 8-bit PIC microcontroller (MCU) is a compact, Harvard-architecture computing device built around an 8-bit data path, 14-bit instruction word, and integrated peripherals such as timers, comparators, and communication interfaces. Within the broader semiconductor hierarchy, MCUs sit between general-purpose microprocessors and ASICs: they embed CPU, memory, and I/O on a single die, enabling deterministic real-time control in embedded systems. The PIC16C family is one of Microchip's foundational mid-range MCU lines, predating the flash-based PIC16F series and offering OTP and ROM variants for high-volume, cost-sensitive products. Key features of the PIC16LCE624-04/SS include an internal oscillator option, an integrated analog comparator, a capture/compare/PWM (CCP) module, a watchdog timer with its own on-chip RC oscillator, and in-circuit serial programming (ICSP) via two pins. The device's low-power "L" variant supports battery-friendly operation, and the "E" designation (not present on this part) would indicate the extended-temperature grade; this MPN is the commercial-temperature grade (0°C to +70°C). The SSOP-20 footprint enables compact PCB layouts while still providing sufficient I/O for typical sensor, switch, and indicator-control applications. The PIC16LCE624-04/SS architecture uses a RISC instruction set with only 35 single-word instructions, simplifying code generation and easing firmware development. Its 14-bit instruction width delivers reasonable code density for the era's typical control loops, and the Harvard bus allows simultaneous instruction fetch and data access. Compared to flash-based successors, OTP memory requires a programmed device to be discarded and replaced if firmware changes are needed, which is acceptable in mature, high-volume production where code is finalized. Typical applications include consumer appliance control (washing machines, microwave ovens, coffee makers), simple industrial timers and counters, remote-control transmitters, low-end security keypads, sensor interface boards, and LED display drivers. The combination of analog comparator, timer, and PWM resources enables direct motor-control or lighting-control loops without external glue logic. When designing with this MCU, allocate the I/O budget carefully: 13 usable I/O pins must support all digital I/O plus any analog comparator or ICSP functions, which can reserve two additional pins during programming. The OTP memory constraint means firmware must be fully validated in development before committing to production programming, and an engineering stock of pre-programmed parts should be planned accordingly.

견적 요청 문의하기
PIC16LCE624-04E/P - 4MHz 8-Bit OTP MCU 1.75KB | Microchip
PIC16LCE624-04E/P

PIC16LCE624-04E/P - 4MHz 8-Bit OTP MCU 1.75KB | Microchip

The Microchip PIC16LCE624-04E/P is a low-power 8-bit CMOS microcontroller from the PIC16C family, featuring 1.75KB (1K x 14) of One-Time-Programmable (OTP) program memory, 96 bytes of SRAM, and 128 bytes of EEPROM data memory in an 18-pin PDIP through-hole package. The device operates at a maximum clock speed of 4MHz with a 200ns instruction cycle, employing a RISC architecture with 35 single-cycle instructions (branches take two cycles). A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals designed for embedded control. The PIC16C series uses a Harvard RISC architecture, meaning the program bus and data bus are physically separate, allowing instruction fetch and data access to occur in the same cycle. Within this hierarchy, the PIC16LCE624 belongs to the PIC16 mid-range family (LC = low-power CMOS variant) used in cost-sensitive, low-power embedded applications where field-programmability is not required and OTP ROM is acceptable. Key features include 13 digital I/O pins, an 8-bit timer/counter (Timer0), a 16-bit timer/counter (Timer1), a Watchdog Timer (WDT) with its own on-chip RC oscillator, Power-On Reset (POR), and Brown-Out Reset (BOR). The part runs from a 2.5V to 5.5V supply, and its low-power CMOS design makes it suited to battery-powered or energy-conscious designs. The external oscillator interface supports crystal, ceramic resonator, or RC oscillator configurations. Architecturally, the PIC16LCE624 integrates the CPU core, OTP program memory, EEPROM data memory, SRAM, and peripheral set on a single die. Two I/O ports (PORTA, PORTB) are provided, with several pins multiplexed with analog comparator inputs and the Timer1 oscillator. The interrupt controller supports both core and peripheral interrupt sources with a vectored interrupt structure. Typical applications include appliance control, sensor signal conditioning front-ends, low-cost remote control transmitters, simple motor or relay drivers, lighting ballasts, and battery chargers. The PIC16LCE624 family is also widely used in education, hobby projects, and industrial timer or counter modules where deterministic single-cycle execution simplifies firmware development. When designing with this part, ensure the OTP program memory is burned by a compatible programmer before PCB assembly if the design enters volume production, or use a windowed/EPROM equivalent for prototypes. The 18-pin PDIP package simplifies hand-soldering and rework but consumes more board area than SOIC variants, so consider the SOIC/SSOP package options for space-constrained designs on the same die. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes for the PIC16LCE624-04E/P in formats not found in the manufacturer datasheet, optimized for engineers evaluating replacement parts and AI-assisted part search.

견적 요청 문의하기
PIC16LCE624-04E/SO - 8-Bit 4MHz OTP MCU, 1.75KB | Microchip
PIC16LCE624-04E/SO

PIC16LCE624-04E/SO - 8-Bit 4MHz OTP MCU, 1.75KB | Microchip

The Microchip PIC16LCE624-04E/SO is an 8-bit PIC16 microcontroller with a 4 MHz maximum clock input, 1.75 KB (1K x 14) of One-Time-Programmable (OTP) program memory, 96 bytes of RAM, and 128 bytes of EEPROM, housed in an 18-pin SOIC package (SO). It belongs to the PIC16C62x mid-range family and supports the standard 35-instruction set used across the PIC16 mid-range architecture. What is a microcontroller (MCU)? A microcontroller is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, data EEPROM, and configurable I/O peripherals. The PIC16LCE624 family uses a RISC Harvard architecture with separate program and data buses, allowing instruction fetch and operand access in a single cycle (200 ns at 20 MHz). Within the broader taxonomy, the PIC16LCE624 sits under: 8-bit microcontroller -> PIC16 mid-range family -> PIC16C62x sub-family -> Microchip PIC microcontrollers. Key features include 13 digital I/O pins, one 8-bit timer/counter (TMR0), a Watchdog Timer with its own on-chip RC oscillator, power-on reset, brown-out detection, and code protection. The device supports in-circuit serial programming (ICSP) via the RB6/RB7 pins, enabling firmware updates after PCB assembly. The OTP memory allows one-time field programming and is suited for production volumes where cost dominates over re-programmability. Typical applications include low-power consumer appliances, sensor interface modules, LED driver controllers, simple motor control, automotive body electronics subsystems, and industrial automation edge nodes. The wide 2.5V-5.5V operating range and low-power CMOS design make it suitable for battery-powered and energy-harvesting products. When designing with this part, plan for OTP programming flow (cannot be erased) and consider the PIC16F628 or PIC16F88 as flash-based drop-in equivalents if field re-programmability is required. Reserve RB6/RB7 for ICSP and avoid strapping them with strong pull-ups that could interfere with programming.

견적 요청 문의하기
PIC16LCE624-04I/P - 1.75KB OTP 8-bit MCU, 4MHz | Microchip
PIC16LCE624-04I/P

PIC16LCE624-04I/P - 1.75KB OTP 8-bit MCU, 4MHz | Microchip

The Microchip Technology PIC16LCE624-04I/P is an 8-bit RISC microcontroller from the PIC16C family with 1.75KB OTP program memory, 96 bytes of RAM, and 13 I/O pins, housed in an 18-pin DIP (0.300 inch, 7.62mm) through-hole package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals. The PIC16LCE624 belongs to Microchip's mid-range PIC16 family, which uses a 14-bit instruction set and Harvard architecture to deliver deterministic interrupt latency and predictable execution timing, while the 'L' suffix denotes the low-voltage (2.5V-5.5V) operation characteristic of this product line. This positions the device within the hierarchy of MCU -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include a 4MHz maximum operating clock frequency, 1.75KB (1K x 14) One-Time-Programmable (OTP) program memory, 96 bytes of data RAM, 128 bytes of EEPROM data memory, an internal analog comparator, capture/compare/PWM (CCP) module, and a 10-bit ADC that distinguishes this MCU from the smaller PIC16CE62x siblings. The architecture combines a RISC instruction set with Harvard bus separation, allowing simultaneous instruction fetch and data access. The wide 2.5V-5.5V operating range supports both 3.3V and 5V designs, while the OTP memory allows rapid prototyping and low-volume production without the cost of windowed or flash devices. Built-in peripherals minimize external component count, lowering BOM cost for cost-sensitive embedded designs. Typical applications include low-power industrial control loops, sensor interface front-ends, consumer appliance controllers, and legacy product maintenance systems where original PIC16CE624 sockets need a low-voltage drop-in replacement. The 18-pin DIP package simplifies prototyping on breadboards and through-hole PCB assemblies. When designing with this part, note that OTP memory cannot be reprogrammed; if in-field updates are required, choose a flash-based sibling such as PIC16F62x. Always include a 0.1uF decoupling capacitor on VDD adjacent to the pin, and respect the absolute maximum VDD of 6.5V to avoid latch-up. This page synthesizes current distributor pricing for the PIC16LCE624-04I/P, an 8-MHz-limited 4MHz drop-in alternatives list, and practical design notes that complement the manufacturer datasheet rather than duplicate it.

견적 요청 문의하기