집적 회로

하위 카테고리

📁 ADC/DAC 2,700+ 제품 📁 증폭기 IC 1,100+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 480+ 제품 📁 Comparator ICs 0 제품 📁 DSP 1,000+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6,800+ 제품 📁 인터페이스 IC 2,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 360+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 19,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (35,000+)

PIC16LF1578-E/SS - 32MHz 8-Bit MCU, 7KB Flash | Microchip
PIC16LF1578-E/SS

PIC16LF1578-E/SS - 32MHz 8-Bit MCU, 7KB Flash | Microchip

The Microchip Technology PIC16LF1578-E/SS is an 8-bit RISC microcontroller featuring a PIC16 CPU core operating at up to 32MHz, integrating 7KB (4K x 14) of FLASH program memory, 512 bytes of data RAM, and 128 bytes of EEPROM data memory, all housed in a 20-pin SSOP package. The device operates from a wide 1.8V to 3.6V supply voltage range (LF variant for low-voltage applications) and is qualified to the extended -40C to +125C automotive temperature grade as indicated by the "E" suffix in the part number. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), peripherals (timers, ADC, PWM, communication interfaces), and I/O into a single package. Within the broader taxonomy, the PIC16LF1578 belongs to: microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F/LF157x sub-family -> semiconductor IC. The "LF" designation indicates the low-voltage/frequency variant optimized for battery-powered and energy-efficient applications, while the "F" siblings (e.g., PIC16F1578) cover the standard 2.3V-5.5V range. Key differentiating features of the PIC16LF1578-E/SS include four 16-bit PWMs with independent timers for high-resolution LED lighting, motor control, and digital power conversion; a 10-bit ADC with up to 12 channels; a 5-bit DAC; a Complementary Waveform Generator (CWG); Hardware Limit Timer (HLT) modules; a 16-bit timer; and Peripheral Pin Select (PPS) for flexible I/O routing. Communication interfaces include EUSART and I2C/SPI. The device supports in-circuit debugging via ICD and program verification through the standard ICSP interface. Typical applications include LED lighting drivers requiring 16-bit PWM resolution, DC-DC converters and digital power supplies needing configurable complementary outputs, automotive sensor interfaces, low-power IoT sensor nodes, and consumer appliance control boards. The wide 1.8V-3.6V range and low-power modes (Sleep, Idle, Doze) suit battery-powered designs. When designing with this part, leverage Peripheral Pin Select (PPS) to remap peripherals to available pins and reuse the same firmware across multiple hardware revisions, but use regular-fit clamp diodes to protect the I/O pins.

견적 요청 문의하기
PIC16LF1578-I/P - 8-bit MCU, 7KB Flash, 4x16-bit PWM, 20-PDIP | Microchip
PIC16LF1578-I/P

PIC16LF1578-I/P - 8-bit MCU, 7KB Flash, 4x16-bit PWM, 20-PDIP | Microchip

The Microchip Technology PIC16LF1578-I/P is an 8-bit PIC microcontroller from the PIC16(L)F157x family, integrating 7KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and a 10-bit Analog-to-Digital Converter (ADC) in a 20-pin PDIP (Plastic Dual In-line Package). It operates at a 32 MHz maximum CPU clock from an internal oscillator and is supplied with a wide VDD range of 1.8V to 3.6V (LF variant), making it suitable for battery-powered applications where low-voltage operation and low quiescent current are required. An 8-bit microcontroller (MCU) is a single-chip computer based on a Harvard-architecture CPU with an 8-bit data path; PIC microcontrollers belong to the RISC family and execute one instruction per clock cycle (except branches), offering deterministic timing for embedded control. Within the broader taxonomy, an MCU sits above general-purpose logic and below a System-on-Chip (SoC): MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16F157x series specifically targets applications needing high-resolution analog and PWM peripherals. The PIC16LF1578-I/P's most distinctive feature is its four 16-bit Pulse-Width Modulation (PWM) outputs with independent timers - significantly higher resolution than the standard 10-bit PWM typical of PIC16 mid-range devices. Each 16-bit PWM channel provides 65,536 discrete duty steps, enabling fine-grained control of LED brightness (high Color Rendering Index dimming), stepper motor microstepping, and switch-mode power supply regulation. The device also includes a 10-bit ADC, configurable logic cells (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) for frequency generation, alongside standard peripherals such as EUSART, MSSP (SPI/I2C), and timers. Architecturally, the PIC16LF1578-I/P uses the enhanced mid-range 16-bit instruction set with a 14-bit program word width and a hardware stack that supports interrupts and context save/restore. The on-chip debugger interface (ICSP/ICD) allows in-circuit programming and real-time debug without removing the part from the PCB, drastically shortening firmware development cycles for both prototypes and production runs. Typical applications include high-resolution LED lighting and dimming systems, stepper motor and DC motor control, switched-mode power supplies (SMPS), battery chargers, IoT sensor nodes, and consumer electronics with custom capacitive touch or logic functions. The wide VDD range makes it especially attractive for 2-cell AA battery products and energy harvesting front-ends. When designing with this device, ensure decoupling capacitors of 0.1 uF (high-frequency) and a bulk capacitor are placed close to VDD/VSS. Use the ICSP pins (RB6/RB7) for in-circuit programming and leave those traces accessible to keep firmware update capability. The maximum clock frequency derates with VDD; consult the datasheet's oscillator table for the supported frequency range at your chosen supply voltage. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1578-I/SO - 8-bit MCU, 7KB Flash, 32MHz, 20-SOIC | Microchip
PIC16LF1578-I/SO

PIC16LF1578-I/SO - 8-bit MCU, 7KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip PIC16LF1578-I/SO is a low-power 8-bit PIC16 microcontroller featuring a 32 MHz internal oscillator, 7 KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and a 10-bit ADC with 5-bit DAC in a 20-pin SOIC package. The "LF" suffix indicates an extended low-voltage operating range of 1.8V to 3.6V, making it suited to battery-powered designs where every microamp matters. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and peripheral interfaces such as timers, ADCs, and communication ports. Within the broader hierarchy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers in arithmetic width and code density; the PIC16 family from Microchip uses a RISC-based 8-bit core optimized for deterministic interrupt response, low power consumption, and small footprint designs. This places the PIC16LF1578 in the category of "general-purpose low-power MCUs" alongside competing families such as the Atmel/Microchip ATtiny and the STMicroelectronics STM8. Key features of the PIC16LF1578 include four independent 16-bit PWMs with complementary outputs, ideal for LED lighting, power conversion, and motor control. The device also integrates a Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART). The Peripheral Pin Select (PPS) feature allows flexible remapping of digital peripherals to physical I/O pins, simplifying PCB layout. With 14 I/O pins, the device supports applications that need more digital channels than a typical 8-pin MCU can offer. Internally, the PIC16LF1578 uses Microchip's enhanced mid-range 8-bit core executing instructions in a single cycle (except branches) at up to 8 MIPS when running at 32 MHz. The 10-bit ADC provides up to 17 input channels (depending on variant) with acquisition time control, and the 5-bit DAC supports programmable reference voltages for slope compensation or bias generation. The CLC enables combinational and sequential logic functions to be implemented in hardware without external gates. Typical applications include LED lighting drivers (RGBW dimming, color mixing), DC-DC converters, battery chargers, power supplies with digital control loops, motor and fan control with PFC, and consumer appliances requiring small pin-count MCUs with rich analog peripherals. When designing with this MCU, ensure that the Vdd decoupling network includes a 0.1 uF ceramic capacitor placed as close as possible to the Vdd pin, and add a bulk capacitor (1 uF or larger) if the load transients are significant. The PPS mapping must be configured in firmware before any peripheral can drive its assigned pin, otherwise the pin will remain a high-impedance input. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and evaluating the PIC16LF1578-I/SO.

견적 요청 문의하기
PIC16LF1578-I/SS - 8-Bit MCU, 7KB Flash, 32MHz | Microchip
PIC16LF1578-I/SS

PIC16LF1578-I/SS - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip PIC16LF1578-I/SS is an 8-bit PIC microcontroller featuring 7KB Flash program memory, 512 bytes RAM, and a 32MHz internal oscillator, housed in a 20-pin SSOP package. It integrates four 16-bit PWMs with independent timers, a 10-bit ADC, a 5-bit DAC, a comparator, a Complementary Waveform Generator (CWG), Peripheral Pin Select (PPS), and an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) interface. A microcontroller (MCU) is a single-chip computer that contains a processor core, program and data memory, and peripheral interfaces. The PIC16 family is built on Microchip's enhanced mid-range 8-bit core, optimized for low-power embedded control. PIC microcontrollers are widely adopted across industrial, consumer, and automotive markets because of their deterministic instruction set, broad peripheral integration, and the MPLAB X IDE toolchain. Within the broader semiconductor taxonomy, this part sits at: PIC16LF1578 -> PIC16F family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key differentiating features include four independent 16-bit PWM channels suited for high-resolution LED lighting and motor control, a 5-bit DAC for bias and waveform generation, a CWG for dead-band control in half-bridge topologies, and PPS that allows peripheral I/O remapping to almost any digital pin. The 'LF' prefix denotes the extended voltage-range variant optimized for low-power operation. Typical applications include LED lighting drivers, stepper motor control, power-conversion circuits (using the CWG and 16-bit PWM), general-purpose 8-bit embedded control, and sensor-conditioning designs that benefit from the integrated 10-bit ADC and 5-bit DAC. The wide operating voltage range and low-power features also suit battery-powered IoT nodes. When designing with this part, plan I/O assignments around the PPS remapping table so peripheral signals can be routed to convenient pins. Verify that the 16-bit PWM time base and the CWG are synchronized if dead-band control is required, and ensure the SSOP-20 thermal envelope suits your industrial (-40C to +85C) environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LF1578T-I/GZ - 8-bit MCU, 7KB Flash, 4x16-bit PWM | Microchip
PIC16LF1578T-I/GZ

PIC16LF1578T-I/GZ - 8-bit MCU, 7KB Flash, 4x16-bit PWM | Microchip

The Microchip PIC16LF1578T-I/GZ is an 8-bit PIC® microcontroller featuring 7KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and four independent 16-bit PWM channels with complementary outputs, all housed in a 20-pin UQFN (4x4 mm) package with exposed pad. It operates up to 32 MHz from a 1.8V to 3.6V supply, making it part of the low-voltage "LF" family optimized for battery-powered designs. The "I" temperature grade denotes -40C to +85C industrial operating range. A PIC microcontroller is a Harvard-architecture 8-bit RISC MCU widely used in embedded control. The PIC16F1 mid-range family adds Core Independent Peripherals such as Configurable Logic Cells, Numerically Controlled Oscillators, and Complementary Waveform Generators, which let peripherals operate without CPU intervention. The PIC16LF1578T-I/GZ specifically delivers four 16-bit PWMs with independent timers, 10-bit ADC with computation, and 4-bit high-speed comparator, suiting applications requiring high-resolution PWM or analog signal conditioning in tight form factors. Key features include 7KB Flash, 512B RAM, 4x 16-bit PWM channels, 10-bit ADC, 4-bit DAC/comparator, 17 I/O pins, and Core Independent Peripherals (CIPs). The integrated Complementary Waveform Generator (CWG) supports dead-band control for switching power stages, reducing BOM cost and PCB area. The 32 MHz internal oscillator eliminates external crystals for many designs, while low-power Sleep modes (typical <50 nA) suit battery-operated sensor nodes. Typical applications include high-density LED lighting drivers, DC-DC converter control loops, stepper motor drivers, switched-mode power supply controllers, and general-purpose analog signal conditioning. The four 16-bit PWM channels are ideal for full-bridge and 3-phase half-bridge topologies commonly used in lighting and motor control. When designing with this device, verify your toolchain supports the PIC16F1 enhanced mid-range core. Older PIC16F baseline tools may not generate compatible code; use MPLAB X IDE with XC8 compiler targeting -mcpu=16f1578.

견적 요청 문의하기
PIC16LF1578T-I/SO - 8-bit MCU, 7KB Flash, 32MHz | Microchip
PIC16LF1578T-I/SO

PIC16LF1578T-I/SO - 8-bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF1578T-I/SO is a low-voltage 8-bit PIC microcontroller built on an enhanced mid-range core with a 32 MHz maximum operating frequency, 7 KB (4K x 14) of Flash program memory and 512 bytes of SRAM, housed in a 20-pin SOIC package with industrial -40C to +85C temperature rating. A PIC microcontroller (Programmable Intelligent Computer) is an 8-bit RISC-based flash MCU family from Microchip widely used in embedded control. Within the broader taxonomy it sits as: PIC16 family -> PIC16F157x subgroup -> 8-bit RISC MCU -> microcontroller -> integrated circuit -> semiconductor. An L-suffix part, the PIC16LF1578 operates across 1.8V-3.6V, making it suitable for battery-powered and low-voltage designs. Key features include four independent 16-bit PWM modules with complementary outputs and configurable dead-band control, a 10-bit ADC with up to 12 channels, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) and a Configurable Logic Cell (CLC) for hardware-level customization without external glue logic. The internal 32 MHz oscillator reduces the bill of materials by removing the need for an external crystal in many designs. The device integrates the Core Independent Peripherals ecosystem (16-bit PWMs, CLC, NCO) which offloads timing-critical tasks from the CPU, leaving headroom for the application stack and communications. Complementarity and dead-band insertion on the PWM make FET half-bridge and full-bridge driving straightforward - useful in LED and motor control. Typical applications include 4-channel LED lighting drivers, DC-DC converter digital control loops, small stepper-motor and brushed DC motor controllers, general-purpose sensor aggregation nodes and consumer white-goods user interfaces where deterministic PWM edge placement is required. Designers should evaluate the NanoMover module for in-circuit programming and reserve one I/O pin for the ICSP interface; supply decoupling with 100 nF near VDD is recommended. For noise-sensitive analog subsystems, average more ADC samples to keep quantization error below 1 LSB. This page consolidates distributor stock and pricing, lists drop-in replacements verified against the verified pinout, and adds design notes that go beyond the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1578T-I/SS - 8-Bit 32MHz MCU 7KB Flash 20-SSOP | Microchip
PIC16LF1578T-I/SS

PIC16LF1578T-I/SS - 8-Bit 32MHz MCU 7KB Flash 20-SSOP | Microchip

The Microchip Technology PIC16LF1578T-I/SS is an 8-bit RISC microcontroller based on the PIC16 CPU core, delivering up to 32 MHz of processing performance with 7 KB of Flash program memory (4K x 14 words) and 512 bytes of SRAM, housed in a 20-pin SSOP package. The part belongs to the PIC16(L)F1574/5/8/9 family, which uniquely combines 16-bit PWM peripherals with on-chip analog such as a 10-bit ADC, a 5-bit DAC, comparators, and the Complementary Waveform Generator (CWG), enabling mixed-signal applications from LED lighting to digital power. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on a single die. Within the broader taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors. The "LF" prefix in PIC16LF1578 indicates a wide-voltage, low-power variant that operates down to 1.8 V, distinguishing it from the PIC16F1578 standard-voltage (2.3 V minimum) sibling. The "LF" parts are well-suited for battery-powered or energy-harvesting designs where supply headroom is constrained. Key differentiating features of the PIC16LF1578 include four independent 16-bit PWMs with dedicated timers for high-resolution control (LED dimming, stepper drives, switch-mode power supplies), a 10-bit ADC with computation (ADC2) for hardware-averaged oversampling, a 5-bit DAC, configurable logic cells, and Peripheral Pin Select (PPS) for flexible I/O mapping. The device also integrates an EUSART for asynchronous/synchronous serial communication and an 8-bit timer/counter complement. Internally, the PIC16LF1578 uses Microchip's enhanced mid-range core with a single-cycle internal oscillator, hardware multiply, and a 14-bit instruction word. The on-chip Complementary Waveform Generator (CWG) provides non-overlapping complementary outputs with dead-band control, eliminating external driver logic in half-bridge power stages. A unified data signal modulator (DSM) permits modulation of any digital output by a carrier waveform. Typical applications include LED lighting controllers, stepper motor drivers, digital switch-mode power supplies, general-purpose timer and PWM fan control, sensor signal conditioning, and low-cost IoT endpoints. The wide operating voltage (1.8 V to 3.6 V) supports Li-ion, coin-cell, and 2x AA battery rails. The 32 MHz internal oscillator removes the need for an external crystal in cost-sensitive designs. When designing with this MCU, ensure that the configured PWM frequency, ADC sampling rate, and EUSART baud rate leave sufficient MIPS headroom - at 32 MHz the core executes 8 MIPS. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin, and tie MCLR to VDD through a 10 kohm resistor unless an external reset circuit is used. This page synthesizes distributor pricing, same-family Microchip drop-in alternatives, application guidance, and design notes not collated in any single manufacturer datasheet, giving engineers a single consolidated reference for sourcing and second-sourcing decisions.

견적 요청 문의하기
PIC16LF1579-E/GZ - 8-Bit MCU 14KB Flash 32MHz 20-UQFN | Microchip
PIC16LF1579-E/GZ

PIC16LF1579-E/GZ - 8-Bit MCU 14KB Flash 32MHz 20-UQFN | Microchip

The Microchip Technology PIC16LF1579-E/GZ is an 8-bit PIC16 microcontroller (MCU) featuring 14 KB Flash program memory (8K x 14 words), 1 KB RAM, 32 MHz internal oscillator, and integrated 16-bit PWM, 10-bit ADC, 5-bit DAC, comparators, CWG, and EUSART peripherals in a 20-pin UQFN (4x4 mm) package. The PIC16(L)F157x family is engineered for applications that combine 16-bit high-resolution PWM control with analog signal conditioning, making it well suited for LED lighting, motor control, power conversion, and consumer-industrial embedded products. What is an 8-bit PIC microcontroller? An 8-bit PIC MCU is a RISC-based embedded controller from Microchip Technology that executes one byte (8 bits) per instruction cycle and uses a Harvard architecture with separate program and data buses. The PIC16F157x family sits in the middle of Microchip's 8-bit portfolio, between the baseline PIC10/12/16 families and the higher-end PIC18 family, and is optimised for cost-sensitive designs that still require sophisticated PWM and analog peripherals. Key differentiating features of the PIC16LF1579 include four independent 16-bit PWMs (vs. the 10-bit PWM found on many PIC16 baselines), a 10-bit ADC with up to 12 channels, a 5-bit DAC, two comparators with selectable reference, a Complementary Waveform Generator (CWG) for half-bridge/full-bridge driver control, a Peripheral Pin Select (PPS) module for flexible I/O mapping, and an EUSART for asynchronous/synchronous serial communication. The device operates across 1.8 V to 3.6 V and is qualified for the extended -40 C to +125 C industrial temperature range. The PIC16LF1579 architecture uses a single-cycle ALU with 49 instructions and a 14-bit instruction word for the 14 KB Flash program memory, providing 8,192 14-bit words of code space. The device includes a configurable internal oscillator (up to 32 MHz via 4x PLL from an 8 MHz HFINTOSC source), reducing external component count, and supports in-circuit serial programming (ICSP) via the ICSPCLK/ICSPDAT pins for field firmware updates. Typical applications include LED drivers and dimming controllers (using the 16-bit PWM), brushless DC (BLDC) fan and pump motor controllers (PWM + CWG + comparator), battery chargers (ADC + PWM), small appliance controls, sensor signal conditioning (op-amp + DAC + ADC), and general-purpose consumer/industrial embedded logic. The combination of 16-bit PWM resolution and on-chip analog makes the part particularly attractive for lighting fade/blending applications and switched-mode power supplies. When designing with the PIC16LF1579-E/GZ, note that the LF (low-power F) variant supports 1.8 V minimum VDD versus 2.3 V on the standard F variant. Place the bulk decoupling capacitor (typically 1 uF-10 uF) as close as possible to the VDD pin, and follow the datasheet's recommended PCB layout for the exposed pad of the UQFN-20 package. The PPS module allows remapping of most digital peripherals to any digital I/O pin, but the I/O voltage tolerance does not exceed VDD, so peripherals operating at 5 V require level shifting. This page synthesises distributor pricing snapshots, drop-in PIC16 same-family alternatives, and practical design notes (PWM duty cycle, ADC sampling, PPS pin selection) not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LF1579-E/P - 8-Bit MCU, 14KB Flash, 32MHz, 20-PDIP | Microchip
PIC16LF1579-E/P

PIC16LF1579-E/P - 8-Bit MCU, 14KB Flash, 32MHz, 20-PDIP | Microchip

The Microchip Technology PIC16LF1579-E/P is an 8-bit PIC microcontroller built on a RISC architecture, featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32MHz, all packaged in a 20-pin PDIP (0.300 inch / 7.62mm through-hole) format. The device is part of the PIC16(L)F1574/5/8/9 family, which uniquely combines four independent 16-bit PWM modules with 10-bit ADC and on-chip peripherals, making it well suited for high-resolution control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for data, and EEPROM for non-volatile data), and programmable peripherals. MCUs sit at the foundation of embedded systems, enabling everything from sensor reading and actuator control to communication protocol handling. Within Microchip's taxonomy, the PIC16 family represents the mid-range 8-bit core, the LF suffix indicates the low-power (1.8V-3.6V) operating range variant, and the 157x sub-family targets applications requiring high-resolution PWM generation. The PIC16LF1579-E/P delivers four hardware 16-bit PWM channels with independent timers - a defining feature compared with the 10-bit PWM common on competing 8-bit MCUs. It includes a 10-bit ADC with up to 12 channels depending on package, a Digital-to-Analog Converter (DAC) module, Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and support for both SPI and I2C serial communication. The 'LF' low-voltage operation from 1.8V to 3.6V enables battery-powered and energy-harvesting designs. The device employs a modified Harvard RISC architecture with a 14-bit instruction word and a 32MHz internal oscillator, achieving up to 8 MIPS throughput. The CIP (Core Independent Peripherals) approach lets PWMs, ADCs, and communication modules operate without CPU intervention, reducing firmware complexity and improving real-time response. The 20-pin PDIP package facilitates breadboard prototyping, hand-soldered repair, and through-hole assembly for low-volume or ruggedized products. Typical applications include high-resolution LED lighting and color-mixing drivers, brushed and stepper motor control, programmable switch-mode power supplies, sensor signal conditioning, IoT end-node controllers, and consumer appliance control boards where the 16-bit PWM resolution is essential for smooth dimming or precise duty-cycle control. When designing with this MCU, allocate two I/O lines for ICSP (In-Circuit Serial Programming) debugging and ensure the VDDCORE decoupling capacitor is placed within 1 cm of the device. The LF variant's 1.8V minimum operation allows direct connection to single-cell Li-coin or 2xAA battery stacks without boost conversion. This page consolidates distributor inventory, drop-in alternative MPNs, and practical design notes into a single engineering reference not duplicated on any single distributor page.

견적 요청 문의하기
PIC16LF1579-E/SO - 8-Bit 32MHz MCU 14KB Flash | Microchip
PIC16LF1579-E/SO

PIC16LF1579-E/SO - 8-Bit 32MHz MCU 14KB Flash | Microchip

The Microchip Technology PIC16LF1579-E/SO is an 8-bit RISC microcontroller from the PIC16F family, delivering up to 32MHz CPU performance with 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 10-bit ADC, housed in a 20-pin SOIC package. It integrates four independent 16-bit PWMs, a 5-bit DAC, comparators, CWG (Complementary Waveform Generator), PPS (Peripheral Pin Select), and an EUSART peripheral, targeting cost-sensitive LED lighting and motor-control applications. A PIC microcontroller is a Harvard-architecture 8-bit RISC MCU widely used in embedded designs for low-power, deterministic control. Positioned within the hierarchy PIC16 -> 8-bit MCU -> microcontroller -> embedded processor, the PIC16LF1579 sits in the 'LF' low-voltage sub-family optimized for 1.8V-3.6V operation, distinguished from the standard 'F' 5V variants. The 'L' prefix denotes extended low-voltage operation, the 'F' indicates Flash program memory, and the 'E' suffix indicates the extended operating temperature range (-40C to +125C). Key features include 14KB Flash, 1KB RAM, four 16-bit PWMs with independent timers for high-resolution LED dimming or motor control, a 10-bit ADC, 5-bit DAC, configurable logic, CWG, EUSART, and PPS that allows remapping of digital peripherals to almost any I/O pin. The 20-SOIC package is a 300-mil wide surface-mount variant offering easier hand-soldering and breadboard prototyping than QFN alternatives. The architecture combines a RISC core with nanoWatt XLP (eXtreme Low Power) technology, achieving deep-sleep currents in the microamp range. PPS adds layout flexibility - a key differentiator over fixed-pin competitors - while the four 16-bit PWMs enable precise dimming and timing without CPU intervention. The CWG module simplifies complementary outputs for half-bridge drivers. Typical applications include high-resolution LED lighting controllers, DC-DC converter control, BLDC motor drives, battery-powered IoT sensor nodes, and consumer appliances requiring capacitive touch via mTouch. The wide 1.8V-3.6V range supports single-cell Li-ion or 2x AA battery topologies. When designing with this part, ensure decoupling capacitors are placed within 3mm of the VDD pin and use PPS to route peripherals efficiently. For battery applications, leverage nanoWatt XLP modes (sleep, doze, idle) to extend runtime. The SOIC package requires standard 1.27mm SOIC footprint - no special land patterns needed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with cross-references to PIC16LF1574/1575/1559 family variants.

견적 요청 문의하기
PIC16LF1579-E/SS - 8-bit MCU 14KB Flash 32MHz SSOP-20 | Microchip
PIC16LF1579-E/SS

PIC16LF1579-E/SS - 8-bit MCU 14KB Flash 32MHz SSOP-20 | Microchip

The Microchip Technology PIC16LF1579-E/SS is an 8-bit CMOS RISC microcontroller featuring the PIC16 CPU core, 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a maximum operating frequency of 32MHz, housed in a 20-pin SSOP package. It is engineered for applications such as LED lighting, stepper motor control, and power conversion, leveraging four 16-bit PWMs with independent timers and a 10-bit ADC with 12 channels for high-resolution analog and digital mixed-signal performance. What is a PIC16 8-bit microcontroller? An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals into a single IC. The PIC16 family uses Microchip's enhanced mid-range RISC architecture, balancing deterministic instruction execution, low power consumption, and a rich peripheral set. The "LF" prefix denotes an extended low-voltage part optimized for battery-powered designs, typically operating from 1.8V to 3.6V. Within the broader taxonomy: microcontroller -> 8-bit MCU -> PIC16 -> PIC16F157x family. Key features include four independent 16-bit PWM channels with dedicated timers, 7 timers total (including 16-bit Timer1/3, 8-bit Timer2/4/6, and a low-power Timer1), 2 comparators, a watchdog timer for code integrity, and Core Independent Peripherals (CIPs) such as Complementary Waveform Generator (CWG), 5-bit DAC, and Peripheral Pin Select (PPS) for flexible signal mapping. The device also integrates a 10-bit ADC with up to 12 input channels and an EUSART module for asynchronous serial communication. The PIC16LF1579 employs a Harvard architecture with separate program and data buses, a 14-bit instruction word, and a hardware multiplier for efficient arithmetic. The device supports in-circuit serial programming (ICSP) and debug via ICD, allowing field updates and rapid prototyping. Internal oscillator calibration supports operation without external crystals, reducing BOM cost. Typical applications include LED lighting and color-mixing drivers, stepper and DC motor control, digital power conversion, general-purpose sensing platforms, and consumer electronics where low power and rich analog integration are required. The 16-bit PWM resolution is particularly valuable for lighting fade ramps and precision motor commutation. When designing with this MCU, ensure that VDD decoupling follows the 0.1 μF + bulk capacitor recommendation and that unused pins are configured as outputs to minimize quiescent current. The PPS feature allows flexible peripheral-to-pin mapping, but care must be taken to avoid conflicting assignments during initialization. This page consolidates distributor pricing, drop-in pin-compatible alternatives within the PIC16F157x family, and practical design notes not found on a single distributor page, accelerating component evaluation for engineers.

견적 요청 문의하기
PIC16LF1579-I/GZ - 8-bit MCU, 14KB, 16-bit PWM | Microchip
PIC16LF1579-I/GZ

PIC16LF1579-I/GZ - 8-bit MCU, 14KB, 16-bit PWM | Microchip

The Microchip Technology PIC16LF1579-I/GZ is an 8-bit PIC16 microcontroller featuring 14 KB Flash program memory, 1 KB RAM, and four independent 16-bit PWMs with 10-bit ADC, packaged in a 20-pin UQFN (4x4 mm) form factor. The device operates up to 32 MHz CPU clock speed from a 1.8 V to 3.6 V supply, targeting the LF (low-power F) variant for battery-friendly designs. Per the Microchip product family page, the PIC16(L)F157x family pairs 16-bit PWM resolution with on-chip analog to suit LED lighting, motor control, and general-purpose timing applications. A PIC microcontroller is a Harvard-architecture RISC MCU widely used in embedded systems for deterministic control loops. PIC16 devices occupy the entry-to-mid-range tier of the Microchip portfolio (PIC10/12/16/18/24/32 families), offering 8-bit data path, low pin counts (8-64), and integrated peripherals such as ADC, PWM, comparators, and communication modules. PIC16 MCUs sit within the broader hierarchy of microcontroller -> semiconductor, balancing cost, power consumption, and capability for high-volume consumer and industrial products. Key specifications include 14 KB (8K x 14 words) of self-programmable Flash, 1 KB SRAM, 256 bytes of EEPROM, a 10-bit ADC with up to 12 channels, four 16-bit PWMs with independent timers for high-resolution LED and motor drive, and multiple communication peripherals (EUSART, I2C/SPI, MSSP). The UQFN-20 (4x4 mm) package delivers a compact footprint suited to space-constrained PCB designs, and the exposed pad aids thermal dissipation. Industrial temperature grade (-40C to +85C) is indicated by the -I suffix in the part number. Architecturally, the PIC16LF1579 uses an enhanced mid-range core with a 14-bit instruction word, hardware multiplier, and the nanoWatt XLP extreme-low-power technology for sleep currents in the microamp range. The integrated 16-bit PWM module is the headline differentiator versus general PIC16 mid-range MCUs that ship with 10-bit PWMs only, enabling finer dimming steps in dimmable lighting and smoother torque control in small BLDC or stepper systems. The device supports ICD (In-Circuit Debug) via standard two-wire programming/debug pins. Typical applications include LED lighting and color-mixing drivers, DC-DC or LED buck/boost control loops, small motor and fan control, consumer appliance control boards, battery-powered IoT sensor nodes, and general-purpose timing/counter replacements. The combination of 16-bit PWM, ADC, and tiny UQFN footprint makes it attractive for high-density lighting PCB arrays where many independent channels must fit on a small board. When designing with the PIC16LF1579-I/GZ, mind the 3.6 V absolute maximum on VDD: this is a 3.3 V logic part, not a 5 V tolerant variant. Decouple VDD/VBAT with at least 100 nF plus 10 uF bulk, place the exposed pad on a contiguous ground copper pour, and confirm programming/debug header access for in-circuit updates. For automotive-grade requirements, consider the PIC16F1579 extended-temperature counterpart instead. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone - giving procurement and design engineers a single reference for both selection and second-source validation.

견적 요청 문의하기
PIC16LF1579-I/P - 8-bit MCU, 14KB Flash, 32MHz, 20-PDIP | Microchip
PIC16LF1579-I/P

PIC16LF1579-I/P - 8-bit MCU, 14KB Flash, 32MHz, 20-PDIP | Microchip

The Microchip PIC16LF1579-I/P is an 8-bit PIC microcontroller with 14KB Flash, 1KB RAM, and four independent 16-bit PWMs, housed in a 20-pin PDIP through-hole package. It operates from 1.8V to 3.6V at up to 32MHz and integrates a 10-bit ADC, 5-bit DAC, comparators, CWG, and PPS on die. An 8-bit microcontroller (MCU) is a single-chip computer that uses an 8-bit data path and is widely deployed in embedded systems for sensor interfacing, motor control, LED driving, and user I/O. Within the PIC16 family hierarchy, the PIC16LF1579 sits between baseline PIC10/12 parts and the PIC18/dsPIC33 lines, balancing low power, peripheral integration, and code density for cost-sensitive 5V-tolerant 3.3V designs. Key features include four 16-bit PWMs with independent timers targeting high-resolution LED lighting and power conversion, 18 general-purpose I/O, peripheral pin select (PPS) for flexible signal routing, and Core Independent Peripherals (CIPs) that offload timing-critical tasks from the CPU. The on-chip 10-bit ADC and 5-bit DAC support mixed-signal conditioning without external converters. The device uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and 8-level hardware stack, providing deterministic interrupt latency and predictable execution for real-time control. The LF prefix denotes the wide-voltage 1.8V-3.6V process variant, while battery-backed RTC and low-power Sleep modes extend coin-cell runtimes. Typical applications include LED lighting drivers, IoT sensor nodes, consumer white goods, hobby and educational platforms, and small appliance motor control. The combination of four 16-bit PWMs and on-chip analog suits dimmable SSL fixtures and BLDC sensorless commutation. When designing with this part, note that the -I/P suffix specifies the industrial temperature grade (-40C to +85C) in a PDIP-20 through-hole package. Use the MPLAB X IDE and XC8 compiler chain, and consult the device-specific header file for PPS mapping. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC16LF1579-I/SS - 32MHz 8-bit MCU, 14KB Flash, 20-SSOP | Microchip
PIC16LF1579-I/SS

PIC16LF1579-I/SS - 32MHz 8-bit MCU, 14KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16LF1579-I/SS is a low-power 8-bit PIC16 microcontroller built on a RISC architecture with a 32 MHz maximum clock rate and housed in a 20-pin SSOP package. It integrates 14 KB of Flash program memory (8K x 14 words), 1 KB of RAM, and 18 general-purpose I/O pins while supporting a wide 1.8 V to 3.6 V operating range that makes it suitable for battery-powered and energy-harvesting designs. On-chip peripherals include four 16-bit PWMs with independent timers, a 12-channel 10-bit ADC, a 5-bit DAC, comparators, a Complementary Waveform Generator (CWG), Peripheral Pin Select (PPS), and an EUSART. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, program memory, data RAM, and peripherals around an 8-bit data path. The PIC16 family specifically falls within the broader Microchip MCU portfolio (PIC10/12/16/18/24/32), targeting low-power embedded applications where deterministic performance, low cost, and small footprint outweigh the need for 32-bit throughput. Within this hierarchy, the PIC16LF1579 sits in the enhanced mid-range core family with 16-bit PWM peripherals targeted at LED lighting, motor control, and power conversion. Key features include four 16-bit PWMs that deliver high-resolution output for LED dimming and digital power conversion, along with a 32 MHz internal oscillator that eliminates the need for an external crystal in many applications. The device also includes a Complementary Waveform Generator with dead-band control for half-bridge and full-bridge topologies, plus PPS for flexible peripheral-to-pin routing that simplifies PCB layout. The architecture uses a Harvard-style design with separate program and data buses, a 14-bit instruction word, and an 8-bit data path. The internal 32 MHz oscillator provides ±2% accuracy across temperature and voltage, and the nanoWatt XLP (eXtreme Low Power) feature provides sleep currents below 1 µA typical. The 16-bit PWM module operates independently from the CPU, allowing precise waveform generation without software overhead. Typical uses include LED lighting controllers with 16-bit dimming resolution, IoT sensor nodes powered by coin cells or energy harvesters, battery chargers and power-conversion controllers that exploit the CWG and 16-bit PWM, brushed DC motor and fan speed control, and small home appliances with capacitive-touch interfaces. The wide operating voltage also makes it compatible with 2x AA / 2x AAA alkaline or single-cell Li-ion supplies. When designing with this part, plan the I/O budget around the 18 available GPIO pins and remember that the PPS module allows remapping most digital peripherals. Add a 0.1 µF decoupling capacitor close to VDD and a bulk capacitor on the MCLR pull-up to ensure clean reset behavior across all operating temperatures. This page synthesizes Microchip PIC16LF1579-I/SS distributor pricing, drop-in same-package alternatives from the PIC16F/LF family, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1579T-I/GZ - 14KB Flash 32MHz 8-bit MCU | Microchip
PIC16LF1579T-I/GZ

PIC16LF1579T-I/GZ - 14KB Flash 32MHz 8-bit MCU | Microchip

The Microchip PIC16LF1579T-I/GZ is a low-power 8-bit RISC microcontroller in the PIC16 family, featuring 14KB of Flash program memory, 1KB of RAM, and a maximum CPU clock of 32MHz, housed in a 20-pin UQFN (4x4 mm) package with an exposed pad. It integrates four 16-bit PWMs with independent timers, a 10-bit ADC, a 5-bit DAC, comparators, CWG, PPS, and an EUSART peripheral set, making it well suited to mixed-signal embedded designs where high-resolution PWM and analog performance are required. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and a RISC-style instruction set, integrating CPU core, non-volatile program storage, working RAM, EEPROM, and a rich set of on-chip peripherals (timers, ADC/DAC, PWM, communication interfaces, comparators). PIC microcontrollers sit in the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Low-voltage "LF" variants extend operation down to 1.8V, making them compatible with modern coin-cell, Li-ion, and energy-harvesting power rails. Key features include four 16-bit PWMs (versus the 10-bit PWMs of older PIC16 families), 16KB of addressable Flash (8K x 14 words), 1KB SRAM, hardware Core Independent Peripherals (CIPs) such as CWG and NCO, Peripheral Pin Select (PPS) for flexible I/O mapping, an integrated 5-bit DAC, and 10-bit ADC with computation support. The LF process technology drops core current draw to suit always-on and battery-powered designs. The PIC16LF1579 architecture combines a Harvard-bus RISC core with Microchip's CIP ecosystem, allowing deterministic PWM, signal conditioning, and communications without CPU intervention. Peripheral Pin Select remaps digital peripherals to a wide range of I/O pins, simplifying PCB routing in dense mixed-signal layouts where analog and digital ground partitioning matters. Typical applications include LED lighting drivers and color-mixing controllers, stepper and DC motor control, digital switched-mode power supplies, general-purpose sensor interfacing, and consumer white goods. The four 16-bit PWMs make it a popular choice for high-resolution lighting fade and dimming, where finer duty-cycle steps yield smoother visual transitions. When designing with this device, observe the UQFN exposed-pad PCB layout requirement (thermal pad must be soldered to the ground plane for proper heat dissipation and electrical grounding) and place decoupling capacitors within 3 mm of each supply pin. PPS must be configured in firmware before first use of remappable peripherals; otherwise the EUSART and PWM outputs will remain on default pins. This page synthesizes distributor stock and pricing signals, parametrically matched drop-in alternatives from the same PIC16 family, and practical design notes not collected in a single place on the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1579T-I/SO - 8-Bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip
PIC16LF1579T-I/SO

PIC16LF1579T-I/SO - 8-Bit MCU, 14KB Flash, 32MHz, 20-SOIC | Microchip

The Microchip Technology PIC16LF1579T-I/SO is an 8-bit PIC16 microcontroller based on a RISC core, delivering 32 MIPS performance at 32 MHz from a 1.8 V to 3.6 V supply, and integrating 14 KB (8 K x 14) of Flash program memory, 1 KB of RAM, and 256 bytes of EEPROM in a 20-pin SOIC (SO) wide-body package supplied on tape and reel. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a mix of peripherals (ADC, timers, communication ports, comparators, PWM) on one silicon die. Within the broader semiconductor taxonomy, an MCU belongs to the microcontroller family, then to the embedded computing category, and finally to logic ICs / integrated circuits. The PIC16 family uses a Harvard-architecture RISC instruction set with 14-bit instruction words, optimized for deterministic interrupt response and low-power embedded control. Key differentiating features of the PIC16LF1579 include four independent 16-bit PWMs with dedicated timers - valuable for LED lighting, motor control, and high-resolution timing; a 10-bit ADC with computation; a 5-bit DAC; rail-to-rail comparators; a Complementary Waveform Generator (CWG); Peripheral Pin Select (PPS) for flexible signal routing; and an EUSART for asynchronous/synchronous serial communication. The 1.8 V minimum VDD supports battery-powered and energy-harvesting designs where the standard PIC16F1579 (2.5 V minimum) cannot operate. Architecturally, the LF variant uses Microchip's eXtreme Low Power (XLP) process technology to achieve nanoWatt sleep currents, and the device supports multiple low-power modes (Sleep, Idle, Doze). Core-independent peripherals offload timing-critical tasks (PWM, CWG, ADC) from the CPU, allowing the core to sleep while peripherals continue operating. Typical applications include 16-bit PWM LED lighting and dimming controllers, DC-DC converter control loops, battery management units, IoT sensor nodes, and general-purpose embedded control where 14 KB of Flash is sufficient. The wide 20-SOIC footprint is hand-solder-friendly and breadboard-compatible, easing prototyping. When designing, plan for VDD decoupling (100 nF plus 1-10 uF bulk), ensure ICSP clock and data lines have ESD protection, and follow Microchip's "Fundamentals of MOSFET, IGBT and Power Electronics" gate-drive guidelines when the MCU is controlling external switching FETs. This page synthesizes distributor pricing, drop-in 20-SOIC alternatives, and engineering design guidance not consolidated in any single source.

견적 요청 문의하기
PIC16LF1579T-I/SS - 32MHz 8-bit MCU 14KB Flash | Microchip
PIC16LF1579T-I/SS

PIC16LF1579T-I/SS - 32MHz 8-bit MCU 14KB Flash | Microchip

The Microchip Technology PIC16LF1579T-I/SS is an 8-bit PIC microcontroller from the PIC16F family that runs up to 32MHz and integrates 14KB (8K x 14) of Flash program memory with 1KB of RAM in a 20-pin SSOP package. The LF prefix denotes the low-voltage variant with a 1.8V to 3.6V operating range, suiting it to battery-powered and portable designs, while the trailing /SS confirms the industrial temperature range and SSOP surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, on-chip RAM, Flash program memory, and a wide set of peripheral modules. It belongs to the microcontroller family within the broader integrated-circuit hierarchy, which also includes microprocessors, DSPs, and FPGAs. MCUs are the workhorse of embedded systems, sitting below application processors and above simple digital logic in design complexity, and they are chosen when deterministic real-time behaviour, low power, and integrated peripherals outweigh raw throughput. Key features of the PIC16LF1579 include four 16-bit PWMs that suit high-resolution LED lighting and motor control, a 10-bit ADC, a 5-bit DAC, a comparator, CWG (Complementary Waveform Generator), and PPS (Peripheral Pin Select). The EUSART module plus the PIC's standard core deliver low-power typical active currents in the µA-per-MHz range, and the 1.8V minimum VDD allows direct operation from a single Li-ion cell. The architecture is a Harvard-style RISC core with a 14-bit instruction word and a small, deterministic instruction set that is well documented for C and MPLAB X development. Integrated peripherals are mapped through PPS, allowing digital functions such as EUSART, PWM, and CWG outputs to be assigned to a wide range of physical pins, which simplifies PCB routing in the SSOP-20 footprint. Typical applications include high-resolution LED drivers, motor control, lighting control, and general-purpose 8-bit embedded designs. The wide 1.8V to 3.6V range makes it ideal for battery-powered or energy-harvesting products, while the four 16-bit PWM outputs suit multi-channel dimming. When designing with this part, ensure that the SSOP-20 thermal envelope and the 32MHz internal oscillator accuracy match the application's timing budget. For designs targeting longer sleep periods, verify the brown-out reset and watchdog settings to maximise battery life. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, and complements the original Microchip datasheet with selection guidance for engineers.

견적 요청 문의하기
PIC16LF1613-E/ML - 8-bit 32MHz 3.5KB Flash XLP MCU | Microchip
PIC16LF1613-E/ML

PIC16LF1613-E/ML - 8-bit 32MHz 3.5KB Flash XLP MCU | Microchip

The Microchip PIC16LF1613-E/ML is a low-power 8-bit PIC16 (RISC) microcontroller IC operating at up to 32MHz, integrating 3.5KB (2K x 14 words) of Flash program memory and 256 bytes of SRAM, in a 16-pin QFN (4x4 mm) package with an exposed pad. The 'LF' prefix indicates the wide-voltage, low-power 'F' silicon revision that runs from 1.8V to 3.6V, while the 'L' (no 'F') variant is a 2.5V-5.5V part. The 'E' temperature grade supports -40C to +125C operation, suitable for industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and programmable peripherals on one die. The PIC16 family uses a 14-bit modified Harvard RISC architecture optimized for deterministic real-time control, sitting within Microchip's hierarchy as: PIC16 -> PIC mid-range 8-bit -> 8-bit MCU -> microcontroller -> embedded computing. The 'XLP' (eXtreme Low Power) designation guarantees sub-uA sleep currents, enabling battery-powered designs where quiescent draw dominates battery life. Key features of the PIC16LF1613 include 12 I/O pins shared with peripheral functions, a 10-bit ADC with up to 11 channels, two comparators, two 8-bit timers plus one 16-bit timer, and an enhanced PWM module with complementary outputs suitable for half-bridge motor control. The 32MHz internal oscillator eliminates an external crystal in cost-sensitive applications. The 'ML' suffix denotes the 16-QFN (4x4) package, which provides compact PCB footprint and good thermal performance via the exposed pad. Typical applications include low-cost sensor nodes, household appliance white goods, battery-powered IoT end-nodes, small DC motor and fan controllers, and general-purpose logic-replacement designs. The PIC16LF1613-E/ML also fits remote controls and human-interface boards where space is constrained. When designing with this MCU, connect the exposed pad (EP) to a clean ground plane to improve thermal dissipation and electrical grounding. Decouple VDD with a 100nF ceramic capacitor placed within 5mm of the supply pin, and follow Microchip AN2169 'Family Migration Guide' for migration between PIC16LF1613, PIC16F1613, and the 8-pin/14-pin members of the PIC16(L)F161x family. This page synthesizes distributor pricing, package-aware drop-in alternatives, and design notes not in the abstract - cross-references both same-family Microchip variants and pin-compatible cross-brand alternatives where available.

견적 요청 문의하기
PIC16LF1613-E/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16LF1613-E/P

PIC16LF1613-E/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16LF1613-E/P is an 8-bit PIC microcontroller from the PIC16F series with 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a maximum CPU speed of 32MHz, housed in a 14-pin PDIP (P) through-hole package. The -E suffix designates the -40C to +125C extended operating temperature grade, and the /P suffix denotes the plastic DIP package with 0.300 inch (7.62mm) row spacing for breadboard-friendly prototyping. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable peripherals. PIC microcontrollers use a RISC-based Harvard architecture with separate program and data buses, enabling single-cycle instruction execution at predictable timing. Within the broader category hierarchy, the PIC16LF1613 sits as: microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F sub-family -> PIC16LF1613 specific part. The 'LF' prefix indicates a low-voltage Flash variant supporting operation down to 1.8V, making it well-suited for battery-powered applications. Key features include 3.5KB Flash self-programmable memory, 256 bytes RAM, a 10-bit Analog-to-Digital Converter (ADC), Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and Zero-Cross Detect (ZCD) peripheral. The device operates from 1.8V to 3.6V (LF range), with internal oscillator options to minimize external component count. The 14-pin package exposes up to 12 I/O pins with interrupt-on-change capability on selected ports. The PIC16LF1613 architecture employs a modified Harvard design with a 14-bit instruction word optimized for C code density. The integrated peripheral set (CLC, CWG, ZCD, SMT) targets motor control and lighting applications that previously demanded discrete logic. The 32MHz internal oscillator provides 8 MIPS instruction throughput with calibrated accuracy suitable for UART communications. This part suits use cases in small motor control (fan/PCF speed control), solid-state lighting dimming, switched-mode power supply (SMPS) digital control, and general-purpose embedded logic replacement. It is pin-compatible with other PIC16F161x family members, simplifying migration to higher-memory variants. When designing, ensure decoupling capacitors are placed within 5mm of the VDD pin. The ICSP programming pins (ICSPCLK/ICSPDAT) require isolation from application circuitry, and unused I/O pins should be configured as outputs low to minimize current consumption. The -E temperature grade permits automotive and industrial deployments. This page synthesizes distributor pricing across multiple vendors, drop-in same-package alternatives, and practical design notes not consolidated in any single manufacturer document.

견적 요청 문의하기
PIC16LF1613-E/SL - 8-bit MCU, 3.5KB Flash, 32MHz, 14-SOIC | Microchip
PIC16LF1613-E/SL

PIC16LF1613-E/SL - 8-bit MCU, 3.5KB Flash, 32MHz, 14-SOIC | Microchip

The Microchip PIC16LF1613-E/SL is an 8-bit PIC RISC microcontroller with 3.5KB Flash, 32MHz CPU, and a 14-pin SOIC package, operating from 3.3V or 5V. It is part of the PIC16F1613 family with low-power (LF) silicon, making it ideal for battery-powered and energy-harvesting designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals. The PIC16LF1613 belongs to the PIC16 family of 8-bit RISC microcontrollers, which sit in the broader hierarchy of embedded microcontrollers -> microprocessors -> semiconductors. Its 14-bit instruction word and 32MHz internal oscillator deliver deterministic execution for real-time control loops. Key features of the PIC16LF1613-E/SL include 3.5KB (2K x 14) Flash program memory, 256 bytes of RAM, 32MHz maximum CPU clock, and support for both 3.3V and 5V operation. Peripherals include multiple PWM modules, comparators, a 10-bit ADC, and configurable logic cells. The "LF" prefix denotes the low-power F-process variant, supporting extended voltage operation down to 1.8V for low-power designs. Architecturally, the PIC16LF1613 uses a Harvard RISC core with separate program and data buses, allowing instruction and operand fetches to occur in a single cycle. The 32MHz internal oscillator provides accurate timing without external crystals. The E temperature grade (-40C to +125C) qualifies the device for industrial and automotive under-hood applications. Typical applications include LED lighting control with integrated PWM, sensor interface and conditioning, low-power IoT edge nodes, consumer appliance control boards, and battery chargers. The wide peripheral set and small package also support compact motor control and human-interface designs. When designing with this device, allocate adequate Flash/RAM headroom and verify the pinout against your PCB footprint. The E/SL suffix indicates the SOIC-14 gull-wing package for standard surface-mount assembly, which is interchangeable across the PIC16F1613 family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1613-E/ST - 8-bit MCU, 3.5KB Flash, 32MHz, 14-TSSOP
PIC16LF1613-E/ST

PIC16LF1613-E/ST - 8-bit MCU, 3.5KB Flash, 32MHz, 14-TSSOP

The Microchip Technology PIC16LF1613-E/ST is an 8-bit PIC microcontroller with 3.5 KB Flash program memory, 256 bytes RAM, and a 32 MHz internal oscillator, housed in a 14-pin TSSOP package. The device operates from 1.8 V to 3.6 V (LF low-power family), targeting battery-powered and energy-harvesting designs that demand extended runtimes and ultra-low sleep current. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals such as timers, ADC, comparators, PWM, and communication interfaces. Within the broader taxonomy, the PIC16LF1613 belongs to the 8-bit PIC16 family (Microchip mid-range architecture), which itself sits under the RISC microcontroller category and the wider power-management-aware embedded controller hierarchy. The "LF" prefix designates the low-voltage variant, which sacrifices absolute maximum supply voltage for dramatically reduced active and sleep currents versus standard PIC16F devices. Key features include 32 MHz operation (8 MIPS), 3.5 KB self-programmable Flash, 256 bytes RAM, 12 I/O pins, a 10-bit ADC with computation (ADC2), multiple PWM modules, configurable logic cells (CLC), numerically controlled oscillator (NCO), and zero-cross detection (ZCD) for TRIAC control. Peripherals such as CLC and NCO allow designers to replace discrete glue logic and analog timers, reducing BOM cost and board area in appliance and lighting control products. Architecturally, the PIC16LF1613 uses Microchip's enhanced mid-range 14-bit instruction set, which provides a C-friendly development experience through the MPLAB X IDE and XC8 compiler. The integrated Core Independent Peripherals (CIPs) - CLC, NCO, CWG, ZCD - can operate without CPU intervention, freeing the core for higher-level tasks and enabling deterministic real-time response even at low clock rates. Typical applications include consumer appliance control (washing machines, microwave ovens), LED lighting with TRIAC dimming, battery-powered IoT sensor nodes, low-cost motor control loops, and remote control units. The combination of 14-TSSOP footprint, 32 MHz speed, and CIPs makes it well suited to designs migrating from legacy PIC12/PIC16 mid-range parts to a more capable but pin-compatible successor. When designing with this MCU, ensure the LF supply rail stays within 1.8 V to 3.6 V; connecting 5 V directly will damage the device. Use MPLAB X IDE with the XC8 compiler, configure ICD programming via the ICSP header, and verify EMC behavior of the ZCD and CLC peripherals against your dimmer or sensor analog front-end. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes - including parameter proximity scoring and AEC-Q100 considerations - that are not aggregated on the manufacturer product page.

견적 요청 문의하기
PIC16LF1613-I/ST - 8-Bit 32MHz 3.5KB Flash MCU | Microchip
PIC16LF1613-I/ST

PIC16LF1613-I/ST - 8-Bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip PIC16LF1613-I/ST is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family, offering 32MHz CPU speed, 3.5KB (2K x 14) flash program memory and 256 bytes of SRAM in a 14-pin TSSOP package. Its nanoWatt XLP technology delivers extremely low active and sleep currents for battery-powered applications, while integrated peripherals include a 10-bit ADC with computation, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerical Comparator (NCO) and Zero-Cross Detection (ZCD). Operating voltage spans 1.8V to 3.6V across an industrial -40C to +85C range, and the device supports in-circuit serial programming (ICSP) via two pins for flexible prototyping and field updates. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral interfaces into one IC. MCUs sit at the heart of virtually every embedded system, executing deterministic firmware that controls sensors, actuators, and communication links. The 8-bit class remains attractive when system cost, code density, and ultra-low sleep current dominate the design trade-off, particularly in sensor nodes, white goods, personal care devices, and remote controls. The PIC16F161X family specifically targets low-cost motor and lighting control with on-chip signal-conversion and timing peripherals that normally require external components. Key features include 32MHz internal oscillator, 14-pin TSSOP footprint, 256 bytes SRAM, 128 bytes EEPROM, a 10-bit ADC with hardware Capacitive Voltage Divider (CVD) for touch and capacitive sensing, and dedicated peripherals for zero-cross detection, waveform generation, and configurable logic. Internal clock accuracy eliminates external crystals in many designs, reducing BOM cost and PCB area. Typical applications include small DC motor and BLDC control, LED lighting drivers, sensor signal conditioning, household appliances, and ultra-low-power IoT nodes. The XLP nanoWatt architecture makes it suitable for battery-powered products targeting years of service life on a single coin cell. When designing with this device, plan pin allocation carefully - only 14 pins are available, and shared peripheral functions can quickly exhaust the available I/O. Use Microchip's MPLAB X IDE with XC8 compiler for development; pick PIC16LF1613-I/ST for industrial-temperature TSSOP builds, PIC16LF1613-I/SL for SOIC-14, or PIC16F1613 for 5V-tolerant extended voltage range. Verify the ZCD, CWG and NCO pin assignments against your PCB layout before committing to layout. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16(L)F161X family and PIC16F1xxx cross-references, plus practical design notes that go beyond a manufacturer datasheet.

견적 요청 문의하기
PIC16LF1613T-I/ML - 8-bit XLP MCU 3.5KB Flash | Microchip
PIC16LF1613T-I/ML

PIC16LF1613T-I/ML - 8-bit XLP MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16LF1613T-I/ML is an 8-bit PIC® XLP™ microcontroller built on a RISC architecture, featuring 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a maximum CPU clock of 32 MHz. It is supplied in a 16-pin QFN (4x4 mm) surface-mount package with an exposed thermal pad, designated by the /ML package code and shipped on tape-and-reel (the 'T' suffix). The device integrates a 10-bit A/D converter and is engineered for low-power operation, operating from a wide voltage range of 1.8V to 3.6V (typical 3.3V) and across an industrial temperature range of -40°C to +85°C. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable peripherals into one IC. PIC microcontrollers from Microchip are widely adopted in embedded designs because of their deterministic instruction set, simple programming model, and extensive peripheral ecosystem. The PIC16LF1613 belongs to the PIC16F16xx family of mid-range 8-bit cores and is targeted at cost-sensitive, battery-powered applications where low active current and deep sleep modes are mandatory. Its hierarchical position in the taxonomy is: microcontroller -> 8-bit MCU -> PIC16 family -> RISC core -> embedded control IC. Key features include ultra-low-power (XLP) technology with active current typically under 1 mA and sleep currents in the microamp range, hardware peripherals such as a 10-bit ADC, comparators, PWM modules, and the Configurable Logic Cell (CLC) for hardware glue logic, plus support for capacitive touch sensing via the mTouch peripheral. The integrated Core Independent Peripherals (CIPs) allow background tasks without CPU intervention, reducing overall system power consumption. Technical depth: the device uses a 14-bit instruction word with a 35-instruction set, executes most instructions in a single clock cycle, and supports interrupt-driven operation. The 16-QFN package offers a small 4x4 mm footprint, with the exposed pad providing thermal dissipation down to a 31°C/W θJA typical value. Programming is supported through Microchip's MPLAB X IDE and the XC8 compiler suite. Typical applications include consumer appliances, IoT sensor nodes, battery-powered handheld devices, low-cost motor control, and lighting controllers. The wide operating voltage range also makes it suitable for 3.3V-logic digital systems. Design consideration: the 16-QFN exposed pad must be soldered to a sufficient copper area for thermal and electrical performance; inadequate soldering to the EP is the most common cause of field failures in QFN-package MCUs. Use at least 0.5 square inches of copper on the EP node. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC16LF1613T-I/SL - 8-bit MCU, 3.5KB Flash, 32MHz, 14-SOIC | Microchip
PIC16LF1613T-I/SL

PIC16LF1613T-I/SL - 8-bit MCU, 3.5KB Flash, 32MHz, 14-SOIC | Microchip

The Microchip Technology PIC16LF1613T-I/SL is an 8-bit PIC microcontroller built on the enhanced mid-range core with 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a 32MHz internal oscillator. Housed in a 14-pin SOIC (SL) package, it belongs to the PIC® XLP™ 16F family and targets ultra-low-power embedded designs operating from 1.8V to 3.6V. What is an 8-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces such as timers, ADCs, and communication ports. An 8-bit MCU processes data 8 bits at a time and is widely used in cost- and power-sensitive embedded applications. Within the broader taxonomy, the PIC16LF1613 belongs to: 8-bit MCU -> PIC16 family -> PIC16F1xxx enhanced mid-range -> PIC® XLP™ 16F series -> power management class of embedded controllers. Key features include the eXtreme Low Power (XLP) technology that delivers nanoWatt sleep currents, four 8-bit timers, a 10-bit ADC with up to 8 channels, enhanced PWM modules, and integrated peripherals such as configurable logic cells (CLC) and numerically controlled oscillator (NCO) for frequency generation. The device also supports multiple communication interfaces including I2C, SPI, and EUSART. The 14-SOIC package operates across the industrial -40C to +85C temperature range. The PIC16LF1613 utilizes Microchip's enhanced mid-range core (14-bit instruction width) with a 2-stage pipeline, providing up to 32MHz operation (8 MIPS) while consuming only microamps in active mode and nanoamps in sleep mode. The integrated core-independent peripherals (CLC, NCO, PWM) offload tasks from the CPU, enabling lower power consumption and faster system response. The combination of XLP technology and peripheral flexibility makes it suitable for battery-powered sensor nodes and IoT endpoints. Typical applications include low-power IoT sensor nodes, battery-powered home automation devices, LED lighting controllers, consumer electronics with touch or capacitive sensing, and small appliance control boards. The wide operating voltage range and ultra-low sleep current are particularly valuable in energy-harvesting designs. When designing with this device, carefully evaluate the I/O count: the 14-SOIC package exposes only 12 I/O pins, which may constrain designs requiring multiple interfaces. For designs needing more I/O, consider the PIC16LF1613 in larger package options such as 20-pin SOIC or 28-pin QFN within the same family. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in alternatives from the PIC16 family, and practical low-power design notes not found in the manufacturer datasheet.

견적 요청 문의하기