집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 798 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 308 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1595 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18747 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32839)

PIC24FJ256GA110-I/PF - 256KB Flash 16-bit MCU 100-TQFP | Microchip
PIC24FJ256GA110-I/PF

PIC24FJ256GA110-I/PF - 256KB Flash 16-bit MCU 100-TQFP | Microchip

The Microchip PIC24FJ256GA110-I/PF is a 16-bit microcontroller from the PIC24F family, featuring 256 KB of flash program memory, 16 KB of RAM, and a 32 MHz (16 MIPS) CPU core in a 100-pin TQFP (14x14 mm) package. It is built on a Modified Harvard architecture with a 17-bit x 17-bit hardware multiplier and a 16-bit hardware divider, optimized for the C compiler to deliver 16 MIPS performance at 3.3 V. The device integrates three I2C, three SPI, four UART, and 23 independent timers, providing exceptional connectivity for embedded systems. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory, and programmable peripherals on a single silicon die. The PIC24F family sits in the 16-bit MCU segment of Microchip's product hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. It bridges 8-bit PIC MCUs and 32-bit PIC32 parts, delivering higher performance than 8-bit parts while costing less than DSP-class silicon, which is why it is widely used in mid-range general-purpose designs. Key differentiating features include the Peripheral Pin Select (PPS) mechanism, which lets most digital peripherals be remapped to alternative physical pins at runtime. NanoWatt XLP eXtreme Low Power technology delivers standby current below 100 nA, enabling battery-powered deployments. The integrated 8 MHz internal oscillator with a 4x PLL option removes the need for an external crystal in many designs. Five 16-bit timers and eight 16-bit capture inputs simplify motor control, sensor sampling, and signal generation. The architecture implements a five-stage instruction pipeline with deterministic interrupt response, 24-bit wide instruction words, and a hardware multiply/divide unit that accelerates 16-bit signal processing. A Real-Time Clock and Calendar (RTCC) module with on-chip 32 kHz oscillator support enables accurate timekeeping without external components, while the Parallel Master Port (PMP) and Enhanced Parallel Master Port allow glueless interface to external memory or graphics controllers. Typical applications include industrial control panels, home automation gateways, low-power sensor hubs, USB device and host bridges, and graphical user interfaces. The wide operating voltage (2.0 V to 3.6 V) and rich communication peripherals make it equally suited to battery-powered IoT edges and mains-powered equipment. For designs migrating from 8-bit PIC18 parts, the PIC24FJ256GA110 offers a software-compatible upgrade path with substantially higher MIPS. When designing with this part, place decoupling capacitors within 2 mm of every VDD/VSS pair and route the 32.768 kHz crystal traces as short and symmetric as possible. The PPS remapping feature should be locked early in firmware bring-up to avoid late-stage PCB re-spins; once committed, PPS configuration cannot be changed in-circuit without a reset. This page synthesizes distributor pricing, drop-in 100-TQFP alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ256GA110-I/PT - 32MHz 256KB Flash 16-bit MCU | Microchip
PIC24FJ256GA110-I/PT

PIC24FJ256GA110-I/PT - 32MHz 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ256GA110-I/PT is a 16-bit PIC24F microcontroller running at up to 32 MHz (16 MIPS) with 256 KB of Flash program memory (85.5K x 24 words) and 16 KB of RAM, packaged in a 100-pin TQFP (12x12 mm, PT suffix). It belongs to the PIC24FJ eXtreme Low Power family and integrates Peripheral Pin Select (PPS) for flexible signal mapping, hardware multiplier, DMA controller, and 85 general-purpose I/O pins. Operating voltage spans 2.0 V to 3.6 V across the industrial -40C to +85C temperature range. A 16-bit microcontroller (MCU) is a class of embedded processor with a 16-bit data path and 16-bit instruction width that balances the throughput of 32-bit devices with the code density and cost of 8-bit devices. Within the broader taxonomy: MCU -> 16-bit MCU -> PIC24 family -> PIC24F sub-family (Flash, low-power). PIC24F parts use a modified Harvard architecture with a 24-bit instruction word, making them well-suited to mixed-signal control applications that exceed 8-bit capability but do not require a DSP. Key features include 256 KB self-programmable Flash with ECC, 16 KB SRAM, three 16-bit timers plus five 16-bit Timer/Counter modules, four UART, three SPI, three I2C, an 8-channel hardware DMA, a 10/12-bit ADC with up to 500 ksps, two analog comparators, and a Real-Time Clock Calendar (RTCC) with less than 100 nA standby current. The hardware multiplier performs 16x16-bit signed operations in a single cycle. Integrated peripherals include a Parallel Master Port (PMP) for graphics and a 16-bit PMP for external memory/display interfaces. Architecturally the PIC24FJ256GA110 uses a 5-stage pipeline, a 24-bit instruction bus, dual-port SRAM, and a Peripheral Pin Select engine that remaps digital peripherals to any of the 85 I/O pins at runtime. eXtreme Low Power (XLP) technology, deep-sleep gating of unused peripherals, and an on-chip LDO regulator keep active current in the low single-digit mA range and standby current below 100 nA. The CTMU peripheral provides touch sensing and time-of-flight measurement. Typical applications include low-power connected sensors, industrial HMI panels, USB/HID bridges, point-of-sale terminals, automotive body controllers, portable medical instrumentation, and graphics/text TFT displays driven by the integrated PMP interface. The 256 KB Flash and 16 KB RAM are well sized for IPv4/IPv6 stacks, USB device class drivers, and small RTOS kernels such as FreeRTOS or Micrium. When designing with this device, place a 10 uF + 0.1 uF bulk-decoupling pair near VDD/AVDD pins and ensure the PPS mapping is locked in the configuration bits before runtime, since PPS registers are write-protected after the first write. Configure the integrated LDO regulator mode carefully when using an external 3.3 V rail to avoid contention. Unused pins should be configured as outputs low or as inputs with the internal pull-up enabled. This page synthesizes distributor pricing, parametrically equivalent drop-in alternatives, application circuits, and design notes for the PIC24FJ256GA110-I/PT, augmenting the manufacturer datasheet with comparison context that AI search systems and procurement teams can cite directly.

견적 요청 문의하기
PIC24FJ256GA110T-I/PF - 256KB Flash 16-bit MCU TQFP-100 | Microchip
PIC24FJ256GA110T-I/PF

PIC24FJ256GA110T-I/PF - 256KB Flash 16-bit MCU TQFP-100 | Microchip

The Microchip Technology PIC24FJ256GA110T-I/PF is a 16-bit microcontroller from the PIC24F family featuring eXtreme Low Power (XLP) technology, 256KB of Flash program memory (85.5K x 24), 16KB of RAM, and a 100-pin TQFP (14x14 mm) package, executing up to 16 MIPS at 32 MHz. A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, RAM, and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC24F belongs to the broader category of 16-bit microcontrollers, which sit between 8-bit MCUs (PIC10/12/16) and 32-bit MCUs (PIC32) in Microchip's portfolio - offering higher performance and larger memory than 8-bit parts while remaining lower-cost and easier to use than 32-bit devices. Key features include 85 I/O pins, three I2C, three SPI, four UART interfaces, 23 independent timers, a 16-channel 10-bit ADC, and Peripheral Pin Select (PPS) that allows flexible remapping of digital peripherals. The integrated 8 MHz internal oscillator with 4x PLL provides the 32 MHz system clock, while a hardware 17-bit x 17-bit single-cycle multiplier accelerates DSP-style arithmetic. Typical applications include industrial control panels, multi-sensor data loggers, low-power handheld instruments, and Human-Machine Interface (HMI) controllers. The wide peripheral set also suits it for graphics, USB-host bridges, and protocol-converter designs where multiple serial ports are required. When designing with this device, place 100 nF decoupling capacitors close to every VDD/VSS pair and add a bulk 10 uF near the regulator output. Configure unused I/O pins as outputs to minimise sleep current. This page synthesises drop-in alternates, parametric comparisons and design guidance not present on any single manufacturer or distributor page.

견적 요청 문의하기
PIC24FJ256GA406-I/MR - 16-bit XLP MCU 256KB Flash 64-QFN | Microchip
PIC24FJ256GA406-I/MR

PIC24FJ256GA406-I/MR - 16-bit XLP MCU 256KB Flash 64-QFN | Microchip

The Microchip Technology PIC24FJ256GA406-I/MR is a 16-bit PIC24F microcontroller built on the eXtreme Low Power (XLP) architecture, integrating 256KB of Flash program memory and 16KB of RAM in a 64-pin QFN package measuring 9 mm × 9 mm with an exposed thermal pad. It runs up to 32 MHz delivering 16 MIPS of CPU throughput at 3.3 V, and operates across a 2.0 V to 3.6 V supply range. On-chip peripherals include a segmented LCD controller, an integrated crypto module with code-guard security, multiple 10-bit and 12-bit ADCs, and 53 general-purpose I/O pins supporting numerous serial protocols. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as ADCs, timers, communication interfaces, and I/O controllers. The 16-bit class sits between 8-bit MCUs (typically used for simple control tasks) and 32-bit ARM Cortex-M parts (used for high-performance DSP and connectivity), offering a balanced mix of computational throughput, deterministic interrupt response, and low power consumption. The PIC24F family uses Microchip's modified Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. Key features of the PIC24FJ256GA406 include the integrated segmented LCD driver (up to 64 segments), which removes the need for an external LCD controller in display-based products, and the hardware crypto engine with intermediate code-guard security that protects intellectual property in deployed firmware. The XLP technology delivers deep-sleep currents in the nanoampere range and multiple power-saving modes such as Sleep, Idle, and Doze, enabling years of operation from a single coin cell. The 53 I/O pins are 5 V tolerant on many ports, allowing direct interfacing with legacy 5 V logic. Two UART/SPI/I2C peripherals, up to five 16-bit timers, and configurable remappable peripherals provide extensive design flexibility. Architecturally, the device pairs the PIC24F modified Harvard CPU core with a wide peripheral set tuned for low-power embedded designs. The dual-partition Flash supports safe in-field firmware updates (one partition runs while the other is reprogrammed), and the on-chip 12-bit ADC reaches 500 ksps for sensor sampling. Hardware DSP extensions accelerate multiply-accumulate routines for sensor fusion or audio preprocessing. The combination of XLP power management, integrated crypto, segmented LCD, and dual-partition Flash is what differentiates this part from generic 16-bit MCUs without security or display support. Typical applications include low-power human-interface products with LCD displays (thermostats, utility meters, medical infusion pumps, and weighing scales), secure IoT sensor nodes that require authenticated firmware and encrypted communications, battery-powered industrial data loggers, and portable consumer health monitors. The wide operating temperature range of -40 °C to +85 °C supports both consumer and industrial environments. When designing with the PIC24FJ256GA406, ensure the exposed thermal pad on the QFN-64 package is soldered to a sufficiently large copper pour on the PCB to meet the thermal resistance rating and provide a low-impedance ground return. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed as close as possible to the respective pins, and follow Microchip's MPLAB X IDE and XC16 compiler toolchain for code development and debug via the integrated ICSP/ICD interface. This page synthesizes distributor pricing tiers, drop-in alternatives from the PIC24F/XLP family, and practical design notes that complement (rather than restate) the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ256GA406-I/PT - 256KB Flash 16-bit XLP MCU | Microchip
PIC24FJ256GA406-I/PT

PIC24FJ256GA406-I/PT - 256KB Flash 16-bit XLP MCU | Microchip

The Microchip Technology PIC24FJ256GA406-I/PT is a 16-bit microcontroller from the PIC® XLP™ 24F family featuring 256 KB Flash, 16 KB RAM, and a 64-pin TQFP (10x10 mm) industrial-temperature package. It integrates an enhanced crypto module with AES-128, segmented LCD driver, and eXtreme Low Power (XLP) technology, delivering up to 32 MHz / 16 MIPS performance at 3.3 V. According to the Microchip PIC24FJ256GA406 datasheet, the device combines an integrated AES engine, 24-channel 10-bit ADC, segmented LCD controller with charge pump, and 5 CCP modules alongside USB 2.0 full-speed OTG and multiple UART/SPI/I²C peripherals. What is a 16-bit MCU with XLP? A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The "16-bit" designation indicates the data path width, giving it 2x the data throughput of an 8-bit MCU while remaining simpler and lower-power than 32-bit Cortex-M parts. PIC24F microcontrollers sit in the hierarchy: 16-bit MCU -> PIC24 family -> XLP 24F series -> PIC24FJ256GA406 sub-family. The "XLP" (eXtreme Low Power) branding refers to Microchip's nanoWatt XLP technology that enables deep sleep currents below 1 µA, making these parts ideal for battery-powered and energy-harvesting designs. Key features include the integrated crypto engine with AES-128 and code-guard security, 256 KB self-programmable Flash with ECC, segmented LCD driver supporting up to 100 segments, and on-chip USB 2.0 full-speed OTG. The Peripheral Pin Select (PPS) remapping system allows flexible I/O assignments, while the 24-channel 10-bit ADC and dual analog comparators serve sensor-rich applications. XLP technology provides 9 deep-power-down modes with currents as low as 20 nA in deep sleep, which is critical for wearables and metering. Architecturally, the device uses a Harvard RISC core with modified instruction sets and a 16-element by 16-bit working register array, achieving 16 MIPS at 32 MHz. The 256 KB Flash is dual-partitioned to support live firmware updates, and 16 KB SRAM supports data-intensive segments. Integrated DMA enables peripheral-to-memory transfers without CPU intervention, freeing cycles for application logic. The crypto engine offloads AES encryption tasks, while the segmented LCD controller with integrated charge pump drives resistive LCD glass from a 2.0-3.6 V supply. Typical applications include industrial metering (electricity, gas, water), portable medical devices, secure IoT edge nodes with over-the-air firmware updates, building automation panels with LCD keypads, and USB-based data loggers. The wide 2.0 V to 3.6 V operating range and 1.8 V minimum Flash programming voltage support single-cell Li-ion and two-AA battery topologies. When designing with this part, allocate PCB area for an external 12 MHz or 16 MHz crystal and the segmented LCD bias capacitors; the integrated charge pump simplifies low-temperature LCD contrast but requires proper bulk decoupling. The PPS system should be configured early in firmware since remapping after peripheral initialization can cause transient glitches. For low-power modes, verify the brown-out reset threshold matches the battery discharge curve to avoid spurious resets in deep sleep. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ256GA406T-I/MR - 16-bit 32MHz 256KB Flash MCU | Microchip
PIC24FJ256GA406T-I/MR

PIC24FJ256GA406T-I/MR - 16-bit 32MHz 256KB Flash MCU | Microchip

The Microchip PIC24FJ256GA406T-I/MR is a 16-bit microcontroller featuring an integrated crypto module, eXtreme Low Power (XLP) technology, 256KB of Flash program memory, 16KB of RAM, a segmented LCD controller, and a 32MHz (16 MIPS) CPU core. It is housed in a 64-pin QFN (9x9 mm) package with an exposed thermal pad. The PIC24FJ256GA406T-I/MR operates from 2.0V to 3.6V and supports industrial temperature ranges of -40C to +85C. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC24F family from Microchip uses a 16-bit modified Harvard RISC architecture optimized for low-power embedded designs. Within the broader category, PIC24F sits below 32-bit ARM Cortex-M0+ parts in raw performance but offers lower active and sleep current, integrated LCD segment drivers, and on-chip cryptography modules. These characteristics make the PIC24FJ256GA406T-I/MR a fit for battery-powered and security-conscious applications. Key features include 256KB (85.5K x 24) self-programmable Flash, 16KB SRAM, 4KB EEPROM, a 10-bit ADC with up to 16 channels, multiple communication peripherals (UART, SPI, I2C), and a segmented LCD driver supporting up to 128 segments. The XLP technology delivers nanoWatt deep sleep currents in the sub-microamp range, enabling multi-year battery life in low-duty-cycle designs. The architecture combines a 16-bit CPU with DSP instructions, a hardware crypto engine, and rich analog/digital peripherals. The integrated crypto module supports AES, DES, and hashing, providing hardware-accelerated security without external components. The segmented LCD driver eliminates the need for an external display controller, reducing both BOM cost and PCB area. Typical applications include IoT sensor nodes with secure communications, battery-powered medical monitoring devices, smart utility meters with LCD displays, industrial control panels, and secure authentication tokens. The wide operating voltage range and low-power modes also suit remote controls and wearable electronics. When designing with the PIC24FJ256GA406T-I/MR, allocate sufficient PCB copper area beneath the exposed pad for heat spreading. The LCD segment pins are multiplexed with digital I/O; designers must plan pin assignments early to avoid conflicts between the LCD glass and other peripherals. This page synthesizes distributor pricing, drop-in alternatives within the same QFN-64 footprint, and practical design notes not found in the standalone Microchip datasheet.

견적 요청 문의하기
PIC24FJ256GA406T-I/PT - 16-bit 32MHz 256KB Flash XLP MCU | Microchip
PIC24FJ256GA406T-I/PT

PIC24FJ256GA406T-I/PT - 16-bit 32MHz 256KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FJ256GA406T-I/PT is a 16-bit PIC24F microcontroller with eXtreme Low Power (XLP) technology, integrating an embedded crypto module, 256KB Flash, and 16KB RAM in a 64-pin TQFP (PT) 10x10 mm package. The core runs at 32MHz delivering up to 16 MIPS, with 53 general-purpose I/O lines and up to six serial communication interfaces including I2C, SPI, and UART. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals. The PIC24FJ family belongs to the 16-bit RISC microcontroller category within Microchip's product hierarchy, positioned between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts. The XLP variant is engineered specifically for battery-powered and energy-harvesting designs where uA-range sleep currents dominate total energy budget. Key features include 256KB Flash (85.5K x 24 instruction words), 16KB RAM, integrated segmented LCD driver, hardware crypto accelerator, multiple power-saving sleep modes down to nanoamp range, and rich analog with 12-bit ADC. Operating voltage spans 2.0V to 3.6V with a typical 3.3V system rail, and the industrial temperature range covers -40C to +85C. The 64-pin TQFP footprint exposes five 8-bit I/O ports plus dedicated analog, timer, and communication peripherals. Architecturally, the PIC24FJ uses a 16-bit modified Harvard RISC core with a 24-bit instruction word and 16-bit data path, executing most instructions in one cycle. The hardware crypto engine accelerates AES, DES, and 3DES without CPU overhead, and the segmented LCD controller drives up to 128 segments directly, eliminating external LCD drivers in HMI applications. CodeGuard security and device lifecycle protections support IP-sensitive applications. Typical applications include battery-powered IoT sensors with secure over-the-air updates, low-power medical wearables with segmented LCD readouts, secure industrial HMI panels with on-board crypto, smart metering endpoints with LCD displays, and portable consumer devices requiring weeks-to-years of battery life. For each use case, the XLP sleep currents and integrated LCD controller remove typical external components. When designing with this MCU, allocate PCB real estate carefully: the 0.5mm-pitch TQFP requires fine-pitch PCB rules, the analog and digital grounds should meet at a single point near the MCU, and the segmented LCD pins must be routed without crossing noisy traces to preserve display contrast. Selecting the correct TQFP variant - PT (10x10 mm) vs MR (QFN) - is critical because both share pinout families but differ in footprint.

견적 요청 문의하기
PIC24FJ256GA410-I/PT - 16-bit 256KB Flash XLP MCU | Microchip
PIC24FJ256GA410-I/PT

PIC24FJ256GA410-I/PT - 16-bit 256KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FJ256GA410-I/PT is a 16-bit PIC24F eXtreme Low Power (XLP) microcontroller with 256 KB Flash, 16 KB RAM, and an integrated crypto engine, housed in a 100-pin TQFP (12x12 mm) package. It operates up to 32 MHz delivering up to 16 MIPS, with a 2.5V/3.3V operating voltage range and an industrial -40C to +85C temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The PIC24F family sits in Microchip's 16-bit MCU portfolio between the 8-bit PIC16/PIC18 devices and the 32-bit PIC32MX/ME families, using a modified Harvard RISC architecture optimized for low-power embedded designs with rich peripheral integration. Within this hierarchy, the PIC24FJ256GA410 is the highest-memory variant of the GA410 subfamily and adds security, segmented LCD, and USB-friendly peripherals. Key differentiating features include an integrated crypto module (AES/SHA support), dual-partition Flash for safe field upgrades, segmented LCD driver (up to 512 segments), 10/12-bit ADC, multiple UART/SPI/I2C interfaces, and Microchip's XLP technology achieving <100 nA standby current. The combination of crypto + segmented LCD + dual-partition Flash in a single 100-pin TQFP is rare among 16-bit MCUs and is the primary reason designers choose this part. Typical applications include secure point-of-sale terminals, IoT edge nodes with display, metering and instrumentation with segmented LCD readouts, secure industrial HMIs, medical devices requiring authenticated firmware, and battery-powered sensor hubs. The XLP modes and crypto acceleration make it well-suited to designs that must stay in standby for years while offering authenticated firmware updates. When designing with this MCU, budget adequate PCB copper around the TQFP thermal pad, plan the dual-partition Flash bootloader in advance, and verify the segmented LCD bias network against your glass. Use MPLAB X IDE with the XC16 compiler and the PIC24FJ256GA410 plug-in module (PIM) for evaluation. This page synthesizes distributor pricing, drop-in alternative MPNs, parametric comparison, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ256GA410T-I/PT - 256KB Flash XLP 16-bit MCU TQFP-100
PIC24FJ256GA410T-I/PT

PIC24FJ256GA410T-I/PT - 256KB Flash XLP 16-bit MCU TQFP-100

The Microchip PIC24FJ256GA410T-I/PT is a 16-bit PIC24F microcontroller featuring 256KB of Flash program memory, 16KB of RAM, an integrated crypto/security module, segmented LCD driver, and eXtreme Low Power (XLP) technology, housed in a 100-pin TQFP (12x12 mm) package. It operates from 2.0V to 3.6V and runs at up to 32 MHz delivering 16 MIPS throughput. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path and instruction word, occupying the middle tier of the embedded hierarchy between 8-bit MCUs and 32-bit Cortex-M parts. The PIC24F family adds DSP-like instructions and 16-bit wide peripheral registers for signal-processing while keeping power consumption low. The PIC24FJ256GA410 family extends this with an on-chip segmented LCD controller, AES crypto engine, and dedicated peripherals for secure, low-power human-machine interface designs. Key features include 256KB dual-partition Flash for live updates, 16KB SRAM, a 12-bit ADC with up to 16 channels, 5 UART/SPI/I2C interfaces, 9 16-bit timers, and a real-time clock calendar. The LCD driver supports up to 480 segments at 4 common lines. XLP technology enables deep-sleep currents as low as 20 nA with RTC running, and the integrated CTMU supports capacitive touch and slope-compensation tasks. The device uses Microchip's modified Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. The crypto engine provides hardware-accelerated AES and unique-per-device 128-bit key storage, suitable for authenticated accessories and anti-cloning applications. Peripheral pin select (PPS) lets designers remap digital peripherals to almost any I/O, simplifying PCB routing in dense designs. Typical applications include secure industrial control panels with LCD readouts, low-power IoT sensor nodes, metering devices (gas/water/electric), wearable health monitors with segmented displays, automotive dashboard clusters (non-safety), and secure peripherals such as authenticated chargers or printer cartridges. The wide operating voltage range and -40C to +85C industrial temperature grade allow deployment in harsh environments. When designing with this part, place a 10 uF bulk plus 0.1 uF decoupling capacitor pair within 5 mm of every VDD/VSS pair and route ICSP pins to a 6-pin header for in-circuit programming. Use Microchip MPLAB X IDE with XC16 compiler and the PIC24FJ256GA410 Plug-in Module on the Explorer 16 board for code development and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet, giving procurement and embedded engineers a single-page reference for PIC24FJ256GA410T-I/PT selection, sourcing, and integration.

견적 요청 문의하기
PIC24FJ256GA606-E/MR - 16-bit 32MHz 256KB Flash MCU | Microchip
PIC24FJ256GA606-E/MR

PIC24FJ256GA606-E/MR - 16-bit 32MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC24FJ256GA606-E/MR is a 16-bit RISC microcontroller belonging to the PIC24F family, running up to 32 MHz and integrating 256 KB of dual-partition Flash program memory together with 32 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package. AEC-Q100 qualified for automotive applications, the part operates from 2.0 V to 3.6 V and exposes 53 general-purpose I/O pins, making it suitable for mixed-signal embedded designs that demand large code storage and rich peripheral integration. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a configurable set of peripherals such as timers, ADC, communication interfaces, and GPIO. Within the broader taxonomy, this device is an instance of: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family -> PIC24FJ256GA606 sub-family. The "FJ" series is Microchip's low-power, Flash-based 16-bit line that introduces nanoWatt XLP deep-sleep modes, while the "GA606" suffix denotes the specific peripheral mix and pin count of this variant. Key features of the PIC24FJ256GA606-E/MR include dual-partition Flash with live update for over-the-air firmware upgrades, a hardware crypto engine (in select family variants), a 16-bit PWM, multiple UART/SPI/I2C interfaces, a 12-bit ADC, and a parallel master port. The dual-bank Flash eliminates firmware-update downtime by allowing background programming into the inactive bank while the active bank continues executing application code - a critical capability for industrial IoT devices requiring remote firmware maintenance. The device combines a 16-bit modified Harvard architecture with a 32 MHz internal oscillator, optional PLL, and instruction-cycle execution that delivers approximately 16 MIPS throughput at 32 MHz. It supports up to 32 KB of RAM and provides a 16-bit wide data path for high-throughput signal processing. The on-chip peripherals include a Real-Time Clock/Calendar (RTCC), multiple Enhanced Capture/Compare/PWM modules, and a Direct Memory Access (DMA) controller for data movement without CPU intervention. Typical applications include industrial automation controllers, automotive body electronics and infotainment subsystems, IoT edge nodes requiring secure firmware update, USB device peripherals, human-machine interface (HMI) panels, and battery-powered sensor hubs. The wide operating voltage range (2.0-3.6 V) and low-power XLP modes also enable direct Li-ion battery operation in portable medical and metering products. When designing with this MCU, place a 10 µF + 0.1 µF decoupling pair adjacent to each VDD/VSS pin pair on the 64-QFN thermal pad, and route the analog VDD rails through a ferrite bead for ADC noise isolation. The exposed thermal pad (EP) must be soldered to the ground plane to achieve the rated 4.5 W thermal dissipation and to maintain AEC-Q100 thermal-cycling reliability. This page consolidates distributor stock data, drop-in pin-compatible alternatives, and practical layout guidance not aggregated on any single vendor page. All numeric specifications are drawn from the manufacturer datasheet family document and distributor listings retrieved on 2026-09-30.

견적 요청 문의하기
PIC24FJ256GA606-E/PT - 256KB Flash 16-bit MCU | Microchip
PIC24FJ256GA606-E/PT

PIC24FJ256GA606-E/PT - 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ256GA606-E/PT is a 16-bit PIC microcontroller featuring a modified Harvard architecture running at 32 MHz (16 MIPS), with 256 KB dual-partition Flash program memory and 32 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. The device integrates 53 general-purpose I/O pins, 9 timers, 6 PWM channels, 3 analog comparators, 8 DMA channels, and a 12-bit ADC. The "E" suffix denotes the extended (-40C to +125C) industrial temperature grade, making it suitable for harsh-environment and AEC-Q100 style automotive applications. A 16-bit microcontroller is a microprocessor whose data path and arithmetic logic unit operate on 16-bit words, providing a balance between computational throughput and code density. Within the broader microcontroller taxonomy, a PIC24F sits in the mid-performance tier of Microchip's PIC family (8-bit PIC16/PIC18 -> 16-bit PIC24F/dsPIC33 -> 32-bit PIC32MX/SAM), and is itself classified as an MCU -> embedded processor -> semiconductor IC. The "FJ" sub-family specifically adds dual-partition Flash with Live Update, allowing the application to swap between two firmware images at runtime for fail-safe field upgrades. Key features include a 16 MIPS core at 32 MHz, dual-partition Flash with Live Update (essential for in-field firmware upgrades without downtime), 32 KB RAM, a 12-bit ADC, USB 2.0 full-speed OTG support, and Microchip's eXtreme Low Power (XLP) technology. The device also offers a Peripheral Pin Select (PPS) system, which remappable peripherals to any digital I/O pin - a feature dramatically simplifying PCB layout. Technically, the PIC24FJ256GA606 employs a modified Harvard architecture with separate instruction and data buses, achieving single-cycle MAC operations. The dual-partition Flash divides the 256 KB into two independent 128 KB blocks, enabling background firmware updates. The integrated AES hardware accelerator and cryptographic features provide hardware-level security, while the 8 DMA channels reduce CPU overhead in data-intensive applications. Typical applications include industrial control and HMI displays, low-power IoT sensor nodes, USB peripherals, automotive body controllers, and battery-powered portable devices. The Live Update feature particularly suits applications requiring fail-safe OTA firmware updates in industrial or medical equipment. When designing with this device, ensure the dual-partition Flash feature is correctly configured in the linker for OTA updates, and verify that any peripheral using PPS is mapped to a pin that supports the chosen digital function. This page synthesizes distributor pricing, drop-in alternative recommendations, and practical design notes drawn from Microchip's datasheet and reference designs - information not consolidated on distributor product pages.

견적 요청 문의하기
PIC24FJ256GA606-I/PT - 16-bit 32MHz 256KB Flash MCU | Microchip
PIC24FJ256GA606-I/PT

PIC24FJ256GA606-I/PT - 16-bit 32MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC24FJ256GA606-I/PT is a 16-bit RISC microcontroller featuring a PIC24 CPU core operating at up to 32MHz, with 256KB of dual-partition Flash program memory (Live Update capable), 32KB SRAM, and a 64-pin TQFP (10x10 mm) package. According to the Microchip product page, it is designed as a low-power MCU with a large memory footprint, ideal for industrial, computer, medical/fitness, and portable applications that require long battery life plus data transfer and storage without external memory. What is a PIC24F microcontroller? The PIC24F is a family of 16-bit modified Harvard RISC microcontrollers from Microchip's PIC24 lineup, positioned above the 8-bit PIC16/PIC18 families in performance and feature integration. They combine an 8-channel hardware multiplier, deterministic interrupt latency, a peripheral-rich architecture, and nanopower XLP (eXtreme Low Power) techniques. PIC24F parts are commonly used in cost-sensitive embedded designs that need more headroom than 8-bit MCUs without the cost of Cortex-M parts. Key features include a 12-bit A/D converter with up to 16 input channels, multiple PWM outputs, 8 DMA channels, 7 timer modules, and support for USB, I2C, SPI, and UART peripherals. The dual-partition Flash with Live Update lets the firmware switch between two firmware images at runtime, enabling safe over-the-air (OTA) updates and bootloader-driven field upgrades without device downtime. Operating voltage is 2.0V to 3.6V, supporting both 2.5V and 3.3V rails typical in portable and battery-powered systems. Architecturally, the PIC24FJ256GA606 uses a 16-bit modified Harvard core with separate program and data paths and a 17-bit x 17-bit hardware multiplier, achieving up to 16 MIPS at 32MHz. The integrated peripherals (12-bit ADC, comparators, CTMU, RTCC, PMP, and Crypto engine variants depending on family) reduce external component count. The device supports multiple low-power modes (Sleep, Doze, Idle, and Retention) that drop current draw to the nanoampere range, supporting long-battery-life designs. Typical applications include industrial sensor nodes, USB-enabled human-interface devices (HIDs), portable medical and fitness monitors, battery-powered data loggers, home automation controllers, and graphics-enabled embedded consoles. The wide peripheral mix also fits motor control signal conditioning and remote sensor hubs. When designing with this part, ensure all VDD/VSS pins are connected (even unused ones) for proper programming and operation. For ICSP, any PGECx/PGEDx pair must be used together, and decoupling must include a 0.1uF ceramic capacitor close to each VDD pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ256GA606T-I/MR - 16-bit 256KB Flash MCU | Microchip
PIC24FJ256GA606T-I/MR

PIC24FJ256GA606T-I/MR - 16-bit 256KB Flash MCU | Microchip

The Microchip PIC24FJ256GA606T-I/MR is a 16-bit low-power microcontroller with 256 KB Flash and 32 KB RAM, packaged in a 64-pin QFN-EP (9x9 mm). It runs up to 32 MHz with a 16-bit modified Harvard architecture, supports 2.0V to 3.6V operation, and integrates dual-partition Flash with Live Update capability. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash for program, RAM for data), and peripherals (timers, ADC, communication interfaces). The 16-bit PIC24F family sits between 8-bit MCUs and 32-bit Cortex-M parts in computational power and price, making it a sweet spot for industrial, consumer, and medical designs that need more headroom than 8-bit but not the cost of ARM Cortex-M4. Within this family, the 'FJ' prefix denotes low-power variants with deep-sleep currents well under 1 microamp and the Live Update feature, which lets firmware swap Flash partitions without a full reboot. Key features include a 10-bit ADC, multiple serial interfaces (UART, SPI, I2C), up to 53 I/O pins, and a low-power management unit with multiple sleep modes. The QFN-64-EP package exposes a thermal pad that drops junction-to-ambient thermal resistance significantly versus leaded packages, enabling higher CPU throughput without thermal throttling. Architecturally, the PIC24FJ256GA606 uses a 16-bit modified Harvard architecture with separate program and data buses, delivering predictable deterministic execution useful in real-time control. The dual-partition Flash is engineered for Live Update firmware swaps, which is rare in this price segment and especially valuable for industrial and IoT devices that must update without service interruption. Typical applications include industrial sensor hubs, portable medical/fitness devices, low-power IoT edge nodes, USB peripherals, and consumer HMI products. The wide operating range (2.0V to 3.6V) and low sleep current also suit battery-powered wearables where standby life dominates. When designing with this device, pay close attention to the Live Update partition layout when defining bootloaders, and ensure the exposed pad on QFN-64-EP is properly soldered with adequate thermal vias to meet the datasheet thermal envelope under maximum CPU load. This page synthesizes XAIPART distributor pricing, drop-in compatible alternates, and practical design notes not found in the manufacturer datasheet alone, helping procurement and firmware engineers shortlist validated substitutes.

견적 요청 문의하기
PIC24FJ256GA610-E/BG - 16-Bit 32MHz 256KB MCU | Microchip TFBGA-121
PIC24FJ256GA610-E/BG

PIC24FJ256GA610-E/BG - 16-Bit 32MHz 256KB MCU | Microchip TFBGA-121

The Microchip Technology PIC24FJ256GA610-E/BG is a 16-bit PIC24F microcontroller with 256KB of dual Flash program memory (85.5K x 24 words), running at up to 32MHz, and packaged in a 121-ball Thin Fine-Pitch Ball Grid Array (TFBGA, 10x10 mm). It integrates 32KB of RAM, an enhanced PIC24 CPU core, and supports Live Update firmware swap for in-field firmware upgrades. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a configurable set of peripherals such as analog-to-digital converters, timers, communication interfaces, and GPIO. Within the broader taxonomy, the PIC24FJ belongs to the 16-bit MCU class, sitting between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts, and is part of the power-management-aware PIC24F subfamily. The "FJ" suffix denotes Flash-based program memory with nanoWatt XLP (eXtreme Low Power) technology, optimized for low-power and mixed-signal embedded designs. Key features include up to 32MHz operation from a 2.0V to 3.6V supply, a 12-bit ADC with up to 24 input channels (with a 10-bit alternate mode), 6 PWM channels, 5 timers, 8 DMA channels, 3 analog comparators, plus Brown-Out Reset (BOR), Power-On Reset (POR), Real-Time Clock (RTC), and Watchdog Timer (WDT). Peripherals include USB, parallel master port, and configurable logic cells. The 121-ball TFBGA package enables high pin count in a compact 10x10 mm footprint suitable for space-constrained designs. Typical applications include low-power IoT edge nodes, automotive body and HMI modules (AEC-Q100 grade 0/1 capable variants exist in the family), industrial human-machine interfaces (HMI), USB peripherals, and graphical display controllers. The dual-bank Live Update Flash enables robust OTA-style firmware updates, which is valuable for industrial and automotive applications requiring in-field service. When designing with this MCU, verify the 121-ball TFBGA PCB land pattern against Microchip's recommended footprint in the device datasheet, since TFBGA pitch (typically 0.8 mm) requires precise via-in-pad or microvia stack-up. Provide adequate decoupling (100nF per supply pin plus bulk capacitors) and follow JESD22-A114 ESD handling for BGA handling. This page synthesizes distributor pricing, drop-in package-compatible alternatives within the PIC24FJ family, and practical PCB design notes not consolidated on the manufacturer product page.

견적 요청 문의하기
PIC24FJ256GA610-I/BG - 16-bit 256KB Flash MCU | Microchip 121-TFBGA
PIC24FJ256GA610-I/BG

PIC24FJ256GA610-I/BG - 16-bit 256KB Flash MCU | Microchip 121-TFBGA

The Microchip Technology PIC24FJ256GA610-I/BG is a 16-bit PIC24F RISC microcontroller running at 32 MHz (16 MIPS) with 256 KB of dual Flash program memory and 32 KB of SRAM, housed in a 121-ball TFBGA (10x10 mm) surface-mount package. It operates from 2.0 V to 3.6 V across the industrial -40 C to +85 C temperature range and is qualified for low-power, real-time control, and graphics/HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals (ADC, timers, communication controllers, I/O). PIC24F devices sit in the 16-bit MCU category and use a modified Harvard architecture with separate program and data buses. Within the power-management hierarchy, the MCU is the active control element; the LDO and reset supervisor sit beneath it on the power tree, while sensors and actuators sit at the periphery. Key features include 85 I/O pins, two 10/12-bit A/D converter modules with up to 24 channels, four UART, three SPI, three I2C, five 16-bit timers, and dedicated peripherals such as the Charge Time Measurement Unit (CTMU), Configurable Logic Cells (CLC), and Parallel Master Port. The Live Update dual-bank Flash allows firmware to be swapped in the field without taking the system offline, which is valuable for safety-critical and continuously-running industrial designs. The PIC24FJ256GA610 family uses Microchip's nanoWatt XLP technology, providing deep-sleep currents under 1 uA with real-time clock retention. The 121-TFBGA reach is appropriate for space-constrained human-machine interface panels, multi-protocol sensor hubs, and battery-powered industrial terminals where board area is limited but pin count must remain high. Typical applications include industrial HMI panels, multi-protocol sensor gateways, portable medical devices, building automation controllers, and battery-backed IoT edge nodes. Design consideration: the 121-TFBGA package requires X-ray or precise-reflow inspection; ensure the PCB pad design follows Microchip's TFBGA land pattern to avoid joint reliability issues. This page synthesizes distributor pricing, verified pin-compatible drop-in alternatives within the PIC24FJ family, and design notes beyond the manufacturer datasheet to accelerate BOM selection and PCB layout decisions.

견적 요청 문의하기
PIC24FJ256GA610-I/PT - 16-Bit 32MHz 256KB Flash MCU | Microchip
PIC24FJ256GA610-I/PT

PIC24FJ256GA610-I/PT - 16-Bit 32MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC24FJ256GA610-I/PT is a 16-bit PIC® 24F microcontroller IC running at 32MHz with 256KB (85.5K x 24) of Flash program memory and 32KB of SRAM, housed in a 100-pin TQFP (12x12 mm) surface-mount package. The device combines eXtreme Low Power (XLP) technology with a large memory footprint and dual-partition Flash supporting Live Update, enabling in-field firmware upgrades without downtime for industrial, medical/fitness, computer, and portable applications. A PIC microcontroller (MCU) is a compact, programmable integrated circuit that combines a CPU, memory, and peripherals on a single die. PIC24F devices are 16-bit modified Harvard RISC microcontrollers in Microchip's mid-range portfolio, positioned between the 8-bit PIC16/PIC18 families and the higher-performance dsPIC/PIC32 lines. They target low-power embedded designs requiring more computational throughput and code density than 8-bit parts but lower cost and power than 32-bit Cortex-M alternatives. Key features include a 16-bit data path, 32MHz maximum clock (8 MIPS with 2-cycle instructions and PLL options), 85 configurable I/O pins, multiple ADC modules (10-bit and 12-bit), 16-bit timers, and a rich serial peripheral set including I2C, SPI, and UART interfaces. The dual-partition Flash with Live Update allows the firmware to swap between two complete code images, eliminating downtime during OTA-style updates. The PIC24FJ256GA610 integrates the MIPS-based 16-bit core with peripheral pin select, a hardware crypto engine for secure data transfer, and on-chip EEPROM emulation. Its XLP architecture delivers nanoWatt sleep currents below 100 nA in deep sleep, making it suitable for battery-powered and energy-harvesting designs that must run for years on a single cell. Typical applications include industrial control and Human-Machine Interface (HMI) panels, USB-connected embedded peripherals, portable medical and fitness devices, battery-backed IoT sensor nodes, and graphics/display controllers that need a large frame buffer. Designers favor this part when 8-bit MCUs are underpowered but a 32-bit MCU's BOM cost and power are unjustified. When laying out this 100-pin TQFP, place a solid ground plane under the device, keep analog and digital supply traces short, and decouple every VDD/AVDD pin with 100 nF ceramics within 2 mm of the pin. Use the Live Update feature with care: both Flash partitions must be programmed and verified before the bootloader performs a swap, otherwise a brown-out during the swap can brick the unit. This page synthesizes distributor pricing, same-package drop-in alternatives drawn from the PIC24FJ GA family, and practical design notes not aggregated on any single manufacturer or distributor page.

견적 요청 문의하기
PIC24FJ256GA610T-I/BG - 16-bit 32MHz 256KB Flash MCU 121-TFBGA
PIC24FJ256GA610T-I/BG

PIC24FJ256GA610T-I/BG - 16-bit 32MHz 256KB Flash MCU 121-TFBGA

The Microchip Technology PIC24FJ256GA610T-I/BG is a 16-bit RISC microcontroller from the PIC24F family, featuring a 32MHz CPU core, 256KB of dual-partition flash (85.5K x 24) and 32KB of SRAM, housed in a 121-pin TFBGA (10x10 mm) package. The part number suffix 'I/BG' denotes the -40C to +85C industrial temperature range and the 121-ball thin-profile fine-pitch BGA package, while the trailing 'T' indicates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and GPIO onto one silicon die. The PIC24F family sits in the 16-bit MCU segment between Microchip's 8-bit PIC16/PIC18 lines and its higher-end 32-bit PIC32MX/ME families, balancing code density, deterministic interrupt latency, and low power consumption. Within Microchip's product taxonomy, a PIC24F MCU belongs to the broader category of microcontrollers -> embedded processors -> semiconductor ICs, and is widely deployed where 8-bit MCUs lack performance and 32-bit MCUs are over-spec. Key features of the PIC24FJ256GA610T-I/BG include 256KB Flash with dual-partition Live Update capability, 32KB RAM, 16 MIPS performance from the 32MHz core, six UART modules, three SPI modules, three I2C modules, two IrDA interfaces, six PWM channels, five timers, eight DMA channels, three analog comparators, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. Configurable Logic Cells (CLC) and Peripheral Pin Select (PPS) provide flexible routing of digital functions to physical pins. The device is fabricated on an eXtreme Low Power CMOS process and supports deep sleep, sleep, idle and doze operating modes to extend battery life. Integrated peripherals such as Real-Time Clock and Calendar (RTCC), brown-out reset (BOR), power-on reset (POR), watchdog timer (WDT), and a 16-channel 12-bit ADC (with 200K samples/sec throughput) provide a near-complete system-on-chip implementation. The 121-TFBGA package exposes 100+ GPIO lines for maximum peripheral connectivity in compact industrial designs. Typical applications include industrial control and HMI, USB device/host bridges, graphic LCD displays, low-power sensor hubs, building automation controllers, medical patient monitors, automotive body and infotainment modules, and capacitive touch user interfaces. The combination of Live Update Flash and CTMU makes it especially attractive for firmware over-the-air capable IoT nodes and touch-panel appliances. When designing with this device, pay close attention to BGA PCB layout - the 0.8mm ball pitch requires laser-drilled or micro-via PCB technology with controlled-impedance traces. Use PPS to remap peripherals and avoid I/O conflicts, and remember that Live Update firmware upgrades require the dual-partition Flash to be configured properly at compile time. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical PCB design notes not found in the manufacturer datasheet alone, giving engineers a one-stop procurement and design reference.

견적 요청 문의하기
PIC24FJ256GA610T-I/PT - 16-bit MCU 256KB Flash 32MHz TQFP-100 | Microchip
PIC24FJ256GA610T-I/PT

PIC24FJ256GA610T-I/PT - 16-bit MCU 256KB Flash 32MHz TQFP-100 | Microchip

The Microchip Technology PIC24FJ256GA610T-I/PT is a 16-bit microcontroller from the PIC24F family with 256 KB dual-partition Flash, 32 KB SRAM, and a 32 MHz (16 MIPS) CPU core, housed in a 100-pin TQFP (12x12 mm, 0.40 mm pitch) package with industrial temperature grade -40C to +85C. A PIC24FJ-series MCU is a 16-bit modified Harvard RISC microcontroller in the broader PIC® microcontroller family. It belongs to the eXtreme Low Power (XLP) sub-family and integrates a high-performance 16-bit DSP-enhanced core with on-chip Flash, SRAM, USB On-The-Go, and a rich peripheral set (UART, SPI, I2C, ADC, timers, RTCC). The hierarchy is: microcontroller -> embedded MCU -> semiconductor IC, with the PIC24F sitting between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices. Key features include 256 KB Flash with dual-partition Live Update for in-field firmware upgrades without downtime, 32 KB SRAM, 16 MIPS performance at 32 MHz, USB On-The-Go with integrated PHY, a 12-bit A/D converter with up to 16 channels, and multiple serial interfaces (UART/SPI/I2C). The 100-pin TQFP exposes a wide I/O count suitable for parallel buses, displays, and multi-sensor designs. The PIC24FJ256GA610T-I/PT is built on a CMOS process and is optimized for ultra-low-power operation, supporting Sleep modes down to sub-1 uA. The dual-partition Flash architecture (256 KB total split into two 128 KB partitions) enables fail-safe firmware updates: the new image is written to the inactive partition while the active partition continues running, then a swap brings the new firmware online atomically. Typical applications include industrial HMI panels, USB peripherals, portable medical/fitness devices, low-power data loggers, and any battery-powered design requiring in-field firmware upgrades. The combination of XLP, USB-OTG, and Live Update makes it well suited to designs that must remain deployed for years without service windows. Design consideration: a 100-pin TQFP requires a 12x12 mm land pattern with 0.5 mm lead pitch; route USB DP/DN as a 90 ohm differential pair with controlled impedance, and reserve the VUSB3V3 pin even when USB is unused to prevent floating-pin leakage. This page synthesizes verified distributor pricing, drop-in alternatives, application circuits, and design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
PIC24FJ256GA702-E/MV - 16-bit 256KB Flash MCU, UQFN-28 | Microchip
PIC24FJ256GA702-E/MV

PIC24FJ256GA702-E/MV - 16-bit 256KB Flash MCU, UQFN-28 | Microchip

The Microchip PIC24FJ256GA702-E/MV is a 16-bit microcontroller from the PIC24F family featuring 256 KB of ECC Flash, 16 KB of RAM, and a 32 MHz (16 MIPS) core, housed in a 28-pin UQFN (4x4 mm) package. It integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and a Direct Memory Access (DMA) controller. The -E suffix denotes the extended industrial temperature range of -40°C to +125°C, and the /MV suffix identifies the UQFN-28 (4x4 mm) package option. A 16-bit microcontroller (MCU) is a microprocessor that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripheral interfaces on a single integrated circuit. The PIC24F architecture sits within the broader microcontroller hierarchy: 16-bit MCU -> embedded controller -> system-on-chip -> semiconductor. PIC24F devices are known for their eXtreme Low Power (XLP) characteristics, supporting sleep currents in the microamp range and multiple power-saving modes suitable for battery-operated designs. Key differentiating features include 256 KB of self-programmable Flash with Error-Correcting Code (ECC) for improved reliability, a 16 KB SRAM data store, and the CTMU peripheral that simplifies touch-key, proximity, and time-of-flight measurements by providing a constant current source for capacitive scanning. The device also offers multiple communication interfaces (UART, SPI, I2C), a Real-Time Clock/Calendar (RTCC), and up to 21 general-purpose I/O pins. The PIC24FJ256GA702-E/MV targets applications that demand low power consumption, robust code storage with ECC protection, and small form factors. Typical use cases include IoT sensor nodes, wearable health monitors, capacitive touch user interfaces, industrial control front-ends, and low-power wireless sensor platforms where the 4x4 mm UQFN package helps minimize PCB area. Designers should note the 28-UQFN package has an exposed thermal pad that must be soldered to the PCB ground plane for thermal dissipation and electrical performance. The device operates from 2.0 V to 3.6 V and integrates a wide range of peripherals to reduce external component count. This page combines distributor pricing, drop-in alternatives within the same UQFN-28 footprint, and practical design notes that complement the Microchip datasheet to support component selection and PCB layout decisions.

견적 요청 문의하기
PIC24FJ256GA702-I/ML - 16-bit 256KB Flash MCU, 28-QFN | Microchip
PIC24FJ256GA702-I/ML

PIC24FJ256GA702-I/ML - 16-bit 256KB Flash MCU, 28-QFN | Microchip

The Microchip PIC24FJ256GA702-I/ML is a 16-bit PIC24F microcontroller featuring 256 KB of ECC Flash, 16 KB of RAM, and eXtreme Low Power (XLP) technology, housed in a 28-pin QFN package with exposed pad. It integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, 3 analog comparators, and a CTMU for capacitive touch applications, alongside the rich 16-bit PIC24F peripheral set. The CPU core runs up to 32 MHz delivering 16 MIPS of computational throughput for embedded control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a configurable peripheral set. The PIC24F family sits in the broader taxonomy of microcontrollers -> embedded controllers -> semiconductors. The 'FJ' suffix indicates Flash program memory with enhanced features including Error-Correcting Code (ECC) for improved reliability in safety-sensitive applications, while the '256GA702' designator specifies 256 KB of Flash in the GA702 pin/package variant. Key differentiating specifications include 256 KB ECC Flash organized as 85.5K x 24 words, 16 KB SRAM, hardware DMA for peripheral-to-memory transfers without CPU intervention, eXtreme Low Power modes achieving sub-microamp sleep currents, and integrated peripherals including I2C, SPI, UART, and a 12-bit 200 ksps ADC. The device operates from 2.0V to 3.6V and supports -40C to +85C industrial temperature range (denoted by the 'I' suffix). Architecturally, the PIC24FJ256GA702 uses Microchip's modified Harvard architecture with separate program and data paths, a 16-bit data path, and a 24-bit instruction word. The ECC Flash implementation detects and corrects single-bit errors, which is critical for medical, industrial, and automotive applications where flash bit-flip reliability matters. Hardware DMA channels offload repetitive data movement between peripherals and RAM, freeing the CPU for application logic. Typical applications include low-power IoT sensor nodes, capacitive touch user interfaces, industrial control panels, USB device peripherals, home appliances, portable medical monitors, and battery-powered instrumentation. The combination of large memory, XLP technology, and rich analog peripherals makes it particularly suitable for human-machine interface (HMI) designs requiring touch buttons or sliders. When designing with this part, ensure the exposed pad (EP) of the QFN package is soldered to a sufficient ground copper pour for both thermal dissipation and low-impedance ground return. Programming is performed via ICSP (In-Circuit Serial Programming) using PGEDx/PGECx pins shared with general I/O - assign them carefully in the pin allocator to avoid bus conflicts during field updates. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design notes that go beyond the manufacturer datasheet, with all data verified as of 2026-09-30.

견적 요청 문의하기
PIC24FJ256GA702-I/MV - 16-bit 256KB Flash MCU | Microchip
PIC24FJ256GA702-I/MV

PIC24FJ256GA702-I/MV - 16-bit 256KB Flash MCU | Microchip

The Microchip PIC24FJ256GA702-I/MV is a 16-bit PIC microcontroller featuring 256KB of ECC Flash, 16KB of RAM, and eXtreme Low Power (XLP) technology, packaged in a 28-pin UQFN (MV) 4x4 mm with exposed pad. It operates at up to 32 MHz delivering 16 MIPS, integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, three analog comparators, and a CTMU peripheral for touch and capacitive sensing applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich peripheral set into one IC. The PIC24F family is positioned in Microchip's 16-bit MCU hierarchy above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32MX/dsPIC lines; it offers a balance of higher performance than 8-bit devices with lower cost and power than 32-bit cores, making it well suited for low-power embedded applications. Within the PIC24FJ family, the GA702 sub-family specifically targets low-pin-count general-purpose designs with eXtreme Low Power requirements. Key features include integrated DMA support, multiple serial interfaces (UART, SPI, I2C), 5 CCP/PWM channels, and a hardware RTCC with calendar mode. The XLP feature set typically achieves sub-uA sleep currents in deep sleep modes, enabling battery-powered designs. The device supports an operating voltage range of 2.0V to 3.6V, suitable for single-cell Li-ion and 3.3V regulated rails. The 28-UQFN 4x4 mm package with exposed pad provides a small footprint with good thermal dissipation for compact industrial and consumer designs. Typical applications include low-power IoT sensor nodes, capacitive touch user interfaces, battery-powered medical devices, industrial HMI panels, and consumer appliances requiring 16-bit processing with low sleep current. The combination of DMA, 12-bit ADC, and CTMU on a 28-pin footprint makes it particularly attractive for space-constrained designs. When designing with this MCU, ensure the UQFN-28 exposed pad is properly soldered to the ground plane for thermal and electrical performance. Use Microchip's MPLAB X IDE with XC16 compiler and MPLAB Code Configurator (MCC) for rapid peripheral setup and code generation. The MV package suffix denotes the UQFN-28 (4x4 mm) variant. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in Microchip alternatives in the same UQFN-28 footprint, and practical design notes not always found in the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ256GA702-I/SO - 16-bit MCU, 256KB Flash, 28-SOIC | Microchip
PIC24FJ256GA702-I/SO

PIC24FJ256GA702-I/SO - 16-bit MCU, 256KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC24FJ256GA702-I/SO is a 16-bit PIC24F microcontroller featuring 256 KB of ECC Flash, 16 KB of RAM, and eXtreme Low Power (XLP) technology, housed in a 28-pin SOIC package (300 mil). It integrates a 12-bit ADC at 200 ksps with up to 14 analog inputs, 3 comparators, CTMU for touch sensing, and a 32 MHz (16 MIPS) CPU core. The part is specified for the industrial -40C to +85C temperature range and operates from 2.0 V to 3.6 V. PIC® 24F devices are built on a 16-bit modified Harvard architecture with DSP instruction support, providing a balance between deterministic real-time control and signal-processing throughput. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals on one die. 16-bit MCUs occupy the middle ground between 8-bit parts (lowest cost, simplest peripherals) and 32-bit MCUs (highest performance, richest ecosystems); they typically deliver 1 to 2 MIPS per MHz, 16-bit-wide datapaths, and DSP-friendly instructions at clock rates of 16–70 MHz. Hypernyms: microcontroller -> MCU -> embedded processor -> semiconductor. Synonyms used across the industry: MCU, microcontroller, micro-controller, embedded controller. Key features of the PIC24FJ256GA702 family include 256 KB ECC Flash for safer code storage, 16 KB RAM, DMA for offloading data movement, 12-bit 200 ksps ADC, 3 op amps/comparators with programmable biasing, CTMU for capacitive touch, USB/Full-Speed in related variants, and multiple low-power sleep modes via the XLP architecture that drop quiescent current below 1 µA in deep sleep. The PIC24F core also supports a peripheral pin-select (PPS) remapping block on many members, simplifying PCB routing. Technically, the PIC24FJ256GA702 uses Microchip's nanoWatt XLP technology with multiple power-managed Run/Idle/Sleep modes, brown-out reset, watchdog timer, real-time clock calendar, and a flexible 16-bit timer/capture/compare/PWM engine. ECC on Flash improves reliability in harsh environments, while DMA accelerates high-bandwidth peripheral transactions such as ADC double-buffering or UART/SPI looped transfers. Typical applications include low-power IoT sensor nodes, capacitive-touch HMI panels, portable medical monitoring accessories, USB peripherals (related variants), industrial sensor transmitters, and battery-powered metering. For each of these, the combination of large ECC Flash, ample RAM, and XLP quiescent current is the key selection factor. When designing with this part, budget 22 I/O lines (per JLCPCB listing) and confirm peripheral pin-select mappings against the chosen 28-pin SOIC variant to avoid pin-conflict surprises.

견적 요청 문의하기
PIC24FJ256GA702-I/SP - 256KB Flash 16-bit MCU | Microchip
PIC24FJ256GA702-I/SP

PIC24FJ256GA702-I/SP - 256KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ256GA702-I/SP is a 16-bit PIC24F microcontroller featuring 256 KB of ECC Flash program memory, 16 KB of RAM, and a maximum CPU speed of 32 MHz (16 MIPS), housed in a 28-pin SPDIP (Skinny Plastic DIP) package. It belongs to the eXtreme Low Power family and integrates a 12-bit ADC with 200 ksps throughput, three analog comparators, a Charge Time Measurement Unit (CTMU) for touch applications, and a Direct Memory Access (DMA) controller. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals such as ADCs, timers, communication interfaces, and I/O ports. The PIC24F architecture is a 16-bit modified Harvard RISC core optimized for low-power embedded designs, sitting hierarchically between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. Key features include a wide 2.0V to 3.6V supply range, support for up to 14 analog input channels (depending on package), multiple serial interfaces (UART, SPI, I2C), a Real-Time Clock Calendar (RTCC), and eXtreme Low Power modes such as Deep Sleep, Sleep, and Idle that draw only microamp-level currents. The CTMU enables capacitive touch sensing without an external touch controller. Architecturally, the device combines a 16-bit RISC core with a 24-bit instruction word, supporting 16 MIPS operation from a 32 MHz oscillator. ECC Flash provides single-bit error correction for enhanced reliability in safety-sensitive applications. The 12-bit ADC delivers up to 200 ksps and supports automatic scanning across multiple analog inputs, offloading the CPU for sensor-array applications. Typical applications include low-power IoT sensor nodes, capacitive touch human-machine interfaces, industrial control and metering, medical portable devices, consumer electronics with USB or display connectivity, and automotive body modules where the -I (industrial) temperature grade of -40C to +85C is acceptable. When designing with this device, ensure that VDD decoupling follows Microchip's reference layout: a 100 nF ceramic on each VDD/VDDCORE pin and a bulk 10 uF on the main rail. For touch applications, dedicate clean ground flooding beneath the CTMU-driven pads and add a guard ring to suppress moisture-induced false triggers. This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/design notes that complement, not duplicate, the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ256GA702-I/SS - 16-bit 32MHz 256KB Flash MCU | Microchip
PIC24FJ256GA702-I/SS

PIC24FJ256GA702-I/SS - 16-bit 32MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC24FJ256GA702-I/SS is a 16-bit PIC24F microcontroller running up to 32 MIPS at 32 MHz, integrating 256 KB of ECC Flash and 16 KB of RAM in a 28-pin SSOP package. The part is qualified for industrial temperature range (-40C to +85C) and targets low-pin-count eXtreme Low Power (XLP) applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADC, timers, communication interfaces) into a single silicon die. The PIC24F family uses a 16-bit modified Harvard architecture with separate program and data buses, sitting in the broader taxonomy: microcontroller -> embedded processor -> semiconductor. The PIC24FJ256GA702 is optimized for ultra-low-power operation through multiple doze, idle and deep-sleep modes combined with a real-time clock calendar (RTCC) that can run from a low-frequency oscillator. Key features include a 12-bit ADC at 200 ksps with up to 14 analog input channels, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, DMA for CPU-offload data movement, and a hardware cryptographic engine. Communication peripherals include I2C, SPI, and UART interfaces, plus a Parallel Master Port (PMP/EPSP) for graphics or external memory expansion. The 28-SSOP package exposes 21 general-purpose I/O pins and supports in-circuit serial programming (ICSP) and in-circuit debugging. The PIC24FJ256GA702 uses a 2.0V-3.6V wide operating range and integrates an 8 MHz internal FRC oscillator with PLL to deliver the rated 32 MIPS throughput. The architecture's 16-bit instruction path gives better code density than 8-bit PIC MCUs while remaining simpler than 32-bit Cortex-M parts, making it attractive for cost-sensitive embedded nodes. Typical applications include portable medical devices, e-metering, sensor hubs, capacitive touch keypads, low-power wireless sensor nodes, and human-machine interface (HMI) panels with small graphic displays. The combination of ECC Flash, DMA, and a wide ADC channel count is well suited to industrial data-acquisition and battery-powered IoT endpoints. When designing with this device, allocate the unused SSOP pins to VSS/VDD per the pinout to maximize supply-rail integrity and use the CTMU for noise-robust touch measurements by calibrating the reference against the on-chip bandgap. Always reserve ICSP/ICD pins (PGC/PGD) for production programming and field firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, providing a one-stop reference for embedded engineers evaluating the PIC24FJ256GA702-I/SS for new designs and pin-compatible second sources.

견적 요청 문의하기